A major instrumented geosynthetic reinforced approach embankment was constructed to 5.5 m elevation above ground, with prefabricated vertical drains, over a soft compressible clay deposit at Leneghan, Newcastle, Australia in May 1995. The field monitoring of settlements for over six years shows that the embankment manifests significant creep. The instrumentation, field performance and the finite element analyses for predicting the long-term performance of this embankment are described in this thesis. The maximum settlement of 1.1 m was observed one year after the completion of construction. However, the embankment continued to settle at a rate of 0.4 mm/day for the next 5 years. The horizontal displacements of 0.09-0.14 m at various locations and the maximum reinforcement strains of 0.67% were recorded. A numerical model was developed to perform a fully coupled large deformation elasto-viscoplastic finite element analysis for this performance prediction based on creep model proposed by Kutter and Sathialingam (1992). The foundation soil was modelled with creep material behaviour using six noded linear strain triangular elements. A well-documented case history ??? Sackville embankment, New Brunswick, Canada was analysed using this model as a benchmark problem and the model was found to predict all the behaviour characteristics reasonably well. The results obtained from finite element analysis using this model are shown to be in reasonable agreement with the observed performance of Leneghans embankment in terms of settlements, horizontal displacements, excess pore pressures and geosynthetic strains. But, the prediction of settlements was less than satisfactory beyond April 1999. Finite element analyses were performed to study the sensitivity of this embankment behaviour on the variation of hydraulic conductivity values and geosynthetic reinforcement properties. This sensitivity study indicated that the kv variation, the kh/kv ratio and the nominal values of geosynthetic properties adopted in the benchmark analysis are reasonable enough for the long-term behaviour prediction.

[Truncated abstract] As mineral deposits continue to be mined, the non economic gangue materials such as sulphides (e.g. pyrite) that are extracted as part of the ore body or overburden are deposited within the waste rock and/or milled tailings. As a result of natural weathering processes, these reactive materials represent a potential hazard to surrounding environments. A major consequence, resulting from mine-waste impoundments containing sulphidic materials, relates to the offsite movement of low pH leachates containing elevated concentrations of metal ions posing a contamination threat. The processes and mechanisms acting in the formation of acid mine drainage (AMD) are highly variable and, to a high extent, controlled by climatic conditions as the main driver of water flow and wetness of the system which in turn determines the availability of oxygen as well as water for pyrite weathering. In particular, this thesis is based on the hypothesis that in semiarid and arid climates the acid production may be water … The experiments were repeated at different water contents ranging from 0.24 to 0.33 cm3 cm-3. Breakthrough curves (BTC) of Li+, K+, Ca2+, Mg2+, Na+ and pH were measured and described with models of different complexities. This included the use of a simple linear and non-linear isotherms for Li+ alone, a binary Li+ - K+ ion exchange, and a complete multicomponent chemical equilibrium description of ion transport. The latter, by including dissolution of primary minerals which released base cations such as Mg2+, Ca2+ and K+ explained some of the elution patterns of base cations for which the Li+ - K+ exchange was the dominant process. Furthermore, under unsaturated water flow conditions, retardation of Li+ increased with decreasing water content. Thus solute mobility in mafic rock tailings appears to decrease under strongly unsaturated water flow conditions.

Submitted by Franciele Moreira (francielemoreyra@gmail.com) on 2018-09-21T14:50:47Z No. of bitstreams: 2 Dissertação - Nícolas Rodrigues Moura - 2018.pdf: 4165797 bytes, checksum: 86460ffa29b4d346005f977c2f75693e (MD5) license_rdf: 0 bytes, checksum: d41d8cd98f00b204e9800998ecf8427e (MD5) / Approved for entry into archive by Luciana Ferreira (lucgeral@gmail.com) on 2018-09-24T13:21:40Z (GMT) No. of bitstreams: 2 Dissertação - Nícolas Rodrigues Moura - 2018.pdf: 4165797 bytes, checksum: 86460ffa29b4d346005f977c2f75693e (MD5) license_rdf: 0 bytes, checksum: d41d8cd98f00b204e9800998ecf8427e (MD5) / Made available in DSpace on 2018-09-24T13:21:40Z (GMT). No. of bitstreams: 2 Dissertação - Nícolas Rodrigues Moura - 2018.pdf: 4165797 bytes, checksum: 86460ffa29b4d346005f977c2f75693e (MD5) license_rdf: 0 bytes, checksum: d41d8cd98f00b204e9800998ecf8427e (MD5) Previous issue date: 2018-08-27 / Coordenação de Aperfeiçoamento de Pessoal de Nível Superior - CAPES / Análises de estabilidade de taludes são predominantemente realizadas em duas-dimensões (2D) por métodos de equilíbrio limite. Os métodos convencionais de equilíbrio limite são alvos de muitas críticas pelo o uso do equilíbrio estático, pressuposições de forças na análise e por possuir o mesmo fator de segurança ao longo de toda a superfície de deslizamento. Para superar essas deficiências, o método proposto por Kulhawy (1969) incorpora o comportamento tensão-deformação do solo com tensões oriundas do Método de Elementos Finitos (FEM) e tem a mesma estrutura dos métodos de equilíbrio dos métodos de equilíbrio de equilíbrio limite clássicos. É também chamado de método aperfeiçoado. Devido à existência de taludes com geometrias complexas, a abordagem tridimensional (3D) é a única capaz de incorporar todos os aspectos geométricos do problema. Esta dissertação é dividida em dois artigos com o tema de estabilidade de taludes pelo o método de Kulhawy em abordagens 2D e 3D. O objetivo primário dessa dissertação é avaliar os principais fatores que influenciam a estabilidade de taludes. O primeiro artigo propôs geometrias variando de convexo a côncavo em um conjunto de propriedades típicas de solos. Duas trajetórias de geração de tensões in- situ foram utilizadas, i.e., construção e escavação. O método GLE foi calculado para fins de comparação. A superfície de deslizamento é muito dependente do histórico de tensão e da forma da face do talude. A diferença relativa no estado de tensões inicial típico alcançou 15% nas análises 2D e 34% nas análises 3D. A análise de sensibilidade do efeito do Poisson no fator de segurança mostrou-se muito relevante. A relação entre os fatores de segurança 2D e 3D são quase lineares independente do estado de tensões, das propriedades de resistência, formato da face do talude, na ordem de 30 a 40%. O segundo artigo propõe análises em barragens construídas em vales estreitos. Três abordagens de análises foram utilizadas: redução de resistência ao cisalhamento (SSR), métodos de Kulhawy e GLE. Condições típicas de fundações são muito variáveis como topografia e deformabilidade. A análise de sensibilidade do módulo de fundação de Young no fator de segurança foi insignificante em 2D e relevantes em 3D. A relação entre o comprimento do aterro (W) e a altura () é uma variável representativa do grau de estreitamento da barragem e na estabilidade de taludes. A análise de deformações planas tende a altas relações W/H e o oposto mostra elevados efeitos 3D. A inclinação da ombreira mostrou-se relevante no fator de segurança apenas em aterros em vales estreitos. Fundações mais rígidas são mais beneficias para o fator de segurança devido à produção de altos efeitos de arqueamento neste cenário. O método de Kulhawy provou-se ser vantajoso pela a incorporação do comportamento mecânico do solo, o uso de tensões mais realísticas nas análises e avaliação da estabilidade local na superfície de deslizamento. Isso aumenta a quantidade de informações úteis e confiáveis para o profissional de engenharia no projeto de taludes. Todas as análises foram realizadas usando o software SoilVision Systems, Saskatchewan, Canadá. Os módulos utilizados foram o SVLOPE, SVSOLID e o SVFLUX (SoilVision Systems Ltd., 2018). A análise de tensão para a simulação de trajetórias de escavação e construção utilizou do solucionador de Equações Diferenciais Parcias (PDE) o FlexPDE 6 (PDE Solutions Inc., 2014). / Slope stability analyses are predominantly performed using the two-dimensional (2D) conventional limit equilibrium methods. Conventional limit equilibrium methods are targets of many criticisms for using static equilibrium, assumptions of forces in the analysis and the same factor of safety along the slip surface. In order to overcome these shortcomings, the method proposed by Kulhawy (1969) incorporates the stress-strain behavior of the soil with stresses from the Finite Element Method (FEM) with the same structure as limit equilibrium methods. It is also called enhanced method. Due to the existence of slopes with complex geometries, the three-dimensional (3D) approach is only able to incorporate all the geometric aspects of the problem. This thesis is divided into two papers with the subject of slope stability analyses by the Kulhawy’s method in 2D and 3D approaches. The primary objective of this thesis is to evaluate major factors that influence slope stability. The first paper proposed geometries ranging from convex to concave in a set of soil properties. Two stress paths were considered, i.e., construction and excavation. The GLE method was computed for comparison purposes. The slip surface is very dependent on the stress history and the shape of slope face. The relative difference in typical initial stress state reached 15% in 2D analyses and 34% in 3D analyses. Sensitivity analysis of effect of Poisson’s ratio on factor of safety was very relevant. The relationship between 2D and 3D factors of safety are nearly linear independent of stress state on order of 30 to 40%. The second paper propose analyses on embankment dams built in narrow valleys. Three approaches of slope stability were used: shear strength reduction (SSR), Kulhawy’s and GLE methods. The typical conditions of foundation sites are very variable as topography and deformability. Sensitivity analysis of Young’s modulus of foundation on factor of safety was insignificant in 2D and relevant in 3D analyses. The ratio between embankment length (W) and height (H) was very important on slope stability. The plane strain analysis tends to high W/H ratio and the opposite shows high 3D effects. The inclination of abutment showed to be relevant on factor of safety only in embankments in narrow valleys. Stiffer foundations are beneficial to the factor of safety due producing high arching effects in this scenario. The Kulhawy’s method proved to be advantageous by the incorporation of mechanical behavior of soil, more realistic stress and local stability evaluation on slip surface. It increases the amount of useful and reliable information to the engineering professional in design of slopes. All analyses were performed using SoilVision Systems suite software, Saskatchewan, Canada. The modules used were SVSLOPE, SVSOLID and SVFLUX (SoilVision Systems Ltd., 2018). The stress analysis for the simulation of excavation and construction trajectories used partial differential equation (PDE) solver, FlexPDE 6 (PDE Solutions Inc., 2014).

En application de l'article 33 de la loi du 16 septembre 1807 relative au dessèchement des marais, la responsabilité du maintien et du contrôle de la bonne sécurité des digues relève du propriétaire de la digue. Au fil des ans, plusieurs textes sont venus préciser et renforcer les obligations en matière de gestion et d'entretien des digues contribuant au sentiment de sécurité que peuvent conférer ces ouvrages. Toutefois, alors qu’elles sont censées protéger les populations, les digues ont progressivement été qualifiées d’« ouvrages de danger » du fait du risque inhérent à leur rupture, conduisant à l’émergence d’un « risque digue » qui reconnaît juridiquement les limites des travaux de protection et de correction des cours d’eau et des rivages, et même leur contribution involontaire à la production de désastres. Les inondations et submersions marines qui sont survenues au cours des deux dernières décennies ont en effet illustré une importante situation de défaut d’entretien des digues sur l’ensemble du territoire métropolitain dont l’origine a pu être identifiée au travers d’une structure de la propriété des digues complexe, avec de multiples intervenants, l’absence pour de nombreux propriétaires riverains de volonté ou de moyens d’investir les sommes nécessaires pour la protection des digues, dont les enjeux dépassent souvent la protection de leurs biens et, en conséquence, pour pallier les carences des propriétaires de digues, une substitution des collectivités territoriales, sans que fût nécessairement mis en œuvre des moyens financiers suffisamment conséquents, et sans que celles-ci mesurent toujours à quel point elles engageaient leur responsabilité / In accordance with article 33 of the 16 september 1807 act relating to the draining of marshes, owners of dams are legally responsible for maintaining and monitoring the dams’ security. Various laws have clarified and strengthened the management and maintenance duty of dams over time to provide a sense of security. Despite the fact that the dams are built to protect people’s security, they have been considered as “hazardous structures” due to the potential risk of collapse. In addition, the legal concept of ‘dams disaster’ has emerged and been established, recognizing the limits of water proofing works as well as improvement and maintenance works and legally recognizing even unexpected disasters. Flooding and submersions occurred during last two decades demonstrated a significant lack of adequate maintenance for dams throughout the mainland France. The cause of lack of maintenance can be attributed to a complicated structure of ownership, which include many stakeholders and also to the owners’ unwillingness or lack of funding to make investments required for improvement and maintenance works. But, these stakes often go beyond the protection of their property. Furthermore, the responsibility of dam owners has been allocated to local authorities to offset deficiencies, but it was done so without preparing financial measures necessary for maintenance works and fully assessing the level of funds needed

Face au changement climatique global, il est de plus en plus important de prêter attention à la performance thermique-hydro-mécanique des constructions géotechniques sous l'effet des conditions atmosphériques. L'objectif principal de cette étude est d'étudier le comportement hydro-thermique des sols soumis au effets du changement climatique par la modélisation numérique.Un modèle hydro-thermique couplé est tout d'abord développé pour décrire le comportement du sol hydro-thermique. La théorie utilisée pour décrire l'interaction sol-atmosphère est présentée sous forme des bilans de masse et d'énergie. Ensuite, une approche numérique pour analyser le comportement hydro-thermique du sol est proposée en combinant le modèle hydro-thermique couplé avec un modèle d'interaction sol-atmosphère. La validation de cette approche est réalisée par la comparaison entre les résultats numériques obtenus en utilisant le code FreeFem++ et les données des essais de la colonne de séchage qui sont trouvées dans la littérature. Cette approche est d'abord utilisée pour la modélisation numérique des essais à la chambre environnementale, réalisés par Song en 2014. Des résultats de simulation satisfaisants sont obtenus en termes de variations de la température et de la teneur en eau volumétrique du sol. Ensuite, cette approche est appliquée à deux remblais, à Héricourt et à Rouen. Pour le remblai d’Héricourt, une étude numérique a été menée pour une durée de 20 jours. La bonne concordance obtenue entre les résultats de simulation et les mesures montre que l'approche proposée est pertinente pour l'analyse du comportement hydro-thermique du sol dans le cas de remblais bidimensionnels. Elle prouve également que les conditions aux limites et les paramètres du sol adoptés sont appropriés. Dans le cas du remblai de Rouen, deux périodes différentes, 187 jours et 387 jours, sont prises en considération. On vérifie également la bonne performance de l'approche proposée pour estimer le comportement hydro-thermique du remblai sous l'effet du climat. La comparaison entre les calculs et les mesures révèle également l'importance d'adopter correctement les conditions aux limites thermiques et hydrauliques ainsi que les paramètres du sol. De plus, à partir des simulations numériques, plusieurs suggestions sont faites pour collecter des données d'entrée dans l'application de cette approche pour prédire les variations de la température et de la teneur en eau du sol à plus long terme / Facing the global climate change, it is more and more important to pay attention to the thermal-hydro-mechanical performance of geotechnical constructions under the effect of atmospheric conditions. The main objective of this study is to investigate the hydro-thermal behavior of soil subjected to climate change through numerical modelling.A coupled hydro-thermal model is developed for describing the coupled hydro-thermal soil behavior. The soil-atmosphere interaction is studied through the mass and energy balances. Afterwards, a numerical approach to estimate soil hydro-thermal behavior by integrating the coupled hydro-thermal model with a soil-atmosphere interaction model is proposed. The validation of this approach is performed through the comparison between the numerical results using FreeFem++ code and the experimental data available from column drying tests reported in literature. This approach is firstly used for the numerical modelling of the environmental chamber tests carried out by Song in 2014. Satisfactory simulation results are obtained in terms of variations of soil temperature and soil volumetric water content. Afterwards, this approach is further applied to two cases of embankments, in Héricourt and in Rouen respectively. For Héricourt embankment, a numerical investigation was conducted for 20 days, and a good agreement between simulation results and filed measurements is obtained, showing that the proposed approach is suitable for analyzing the soil hydro-thermal behavior in the case of two-dimensional embankments. It proves also that the boundary conditions and the soil parameters adopted are appropriate. In the case of Rouen embankment, two different periods, 187 days and 387 days, are considered. The good performance of the proposed approach in estimating the embankment hydro-thermal behavior under the climate effect is also verified. The comparison between calculations and measurements also reveals the importance of appropriately adopting the thermal and hydraulic boundary conditions as well as the soil parameters. Based on the numerical simulations, several suggestions are made in terms of collection of input data for the application of this approach to predict soil temperature and volumetric water content variations in longer term

[pt] A grande maioria das obras geotécnicas, tais como algumas fundações, aterros e escavações, apresentam uma configuração geométrica tipicamente tridimensional. No entanto, em função da complexidade da obtenção de soluções considerando os aspectos inerentes à condição de deformação e tensão tridimensionais, as análises destas obras têm sido comumente realizadas adotando-se as aproximações de deformação plana e/ou axissimétrica. Esta dissertação apresenta um modelo computacional baseado na formulação em deslocamento do método dos elementos finitos para a simulação de problemas mecânicos de equilíbrio estático de obras geotécnicas em condição tridimensional. São ressaltados os problemas de capacidade de carga de fundações superficiais e a simulação da construção de aterros. O solo é considerado como um material não linear elasto-plástico e os modelos não associados Mohr-Coulomb modificado e Lade-Kim são adotados para representar sua relação tensão-deformação resistência. As estratégias de solução não linear, tanto a nível global quanto em nível de ponto de Gauss, são apresentadas e discutidas. Os exemplos de capacidade de carga das fundações superficiais são comparados com os resultados da teoria do equilíbrio limite e da análise limite indicando bons resultados. O efeito da tensão intermediária na trajetória de tensão é apresentado e discutido nos exemplos de simulação da construção de aterros. / [en] The vast majority of geotechnical works, such as some foundations, embankments and excavations, show a typical three-dimensional geometric configuration. However, depending on the complexity of obtaining solutions considering the aspects inherent to the three-dimensional deformation and stress, the analysis of these works have been performed by adopting common approaches and plane strain or axisymmetric. This dissertation presents a computational model based on displacement formulation of finite element method for simulation of mechanical problems of static equilibrium condition of geotechnical works in three dimensions. It highlights the problems of load capacity of shallow foundations and the simulation of embankment construction. The soil is considered as material non-linear elastic-plastic models and non-associated Mohr- Coulomb and modified Lade-Kim are adopted to represent their relationship stress-strain-resistance. The nonlinear solution strategies, both overall and in the Gauss point level, are presented and discussed. Examples of load capacity of shallow foundations are compared with the results of the theory of limit equilibrium and limit analysis showing good results. The effect of tension in the intermediate stress path is presented and discussed in the simulation examples of the construction of embankments.

A deficiência na gestão de resíduos causa diversos problemas como os aterros irregulares, poluição da água e ar, saúde da população, contaminação dos solos e da água. Há mais de uma década legislações estão vigentes e sendo atualizadas com o intuito de amenizar os impactos decorrentes dos RCC’s. O objetivo principal do presente trabalho consiste em investigar a conformidade técnica e legal de sistemas de gerenciamento de resíduos de construção civil na cidade de Curitiba, no Estado do Paraná. Para isso, foi elaborada uma lista de verificação baseada nas normas vigentes e modelos de certificações ambientais. Foram visitadas 24 obras nas quais foi aplicada a lista de verificação, de forma a realizar um diagnóstico dos sistemas de gerenciamento atualmente utilizados. Mesmo a gestão de resíduos sendo obrigatória e limitante para obtenção do certificado de conclusão de obra, através desse diagnóstico foi possível verificar que os sistemas adotados são falhos, há falta de conscientização, e que a aparente conformidade documental não se traduz em efetivo gerenciamento dos RCC. / Waste management deficiency causes various problems like irregular landfill, water and air pollution, population health, soil and water contamination. For over a decade waste laws are in place and being updated in order to mitigate the impacts of RCC's. The main objective of the present work consists of investigate a technical and legal compliance of waste management systems of construction in Curitiba, State of Paraná. For this, a checklist has been drawn up based on current laws and models of environmental certifications. 24 civil constructions were visited and applied this checklist in each one in each one of them for it to be possible to make the analysis of the data. Even waste management is mandatory and limiting for obtaining CVCO through this diagnosis was verified that the systems adopted are failed, there is a lack awareness and that the apparent document compliance does not translate into effective management of RCC.

CAPES / Os resíduos oriundos da construção e demolição quando não têm uma destinação final adequada acarretam em problemas de ordem social, econômica e ambiental. O descarte que muitas vezes acontece em locais inapropriados, demonstra a necessidade de áreas para a correta disposição final em acordo com as normas vigentes. Visando a diminuição dos impactos causados por esse tipo de resíduos, buscando atender a legislação pertinente, a indicação de áreas aptas à implantação de aterros de resíduos de construção e demolição ou aterro classe A faz-se necessária. Para isso, foi utilizada a ferramenta de Sistema de Informação Geográfica (SIG), apoiada pela análise e decisão por multicritérios. O SIG utilizado como ferramenta base na identificação de possíveis áreas adequadas tem como vantagem: o baixo custo; maior rapidez no processo de tomada de decisão e a diversidade de cenários que podem ser analisados ao mesmo tempo, sendo de grande valia nas etapas de gerenciamento dos resíduos de construção e demolição. Integrando o SIG com a ferramenta de análise e tomada de decisão por multicritérios, tem-se como resultado a indicação de possíveis áreas aptas à implantação de aterros de construção civil e inertes para o Núcleo Central Urbano da Região Metropolitana de Curitiba. / The construction and demolition (C&D) waste when do not have a proper final disposal; result in social, economic and environmental problems. The disposal often happens in inappropriate locations and demonstrates the necessity of adequate areas for the waste final disposal but also the selected site must be in accordance with local standards and regulations. Considering all these facts, the aim of this work is to indicate possible suitable areas for C&D waste landfill, using the Geographic Information System (GIS) tool, supported by Multi-criteria Decision Analysis (MCDA). The GIS used as a basic tool to identify possible suitable areas has several advantages: low cost; faster decision-making process and various scenarios can be analyzed simultaneously, being a valuable tool in all the construction and demolition waste management steps. Integrating GIS with MCDA has resulted in the indication of possible suitable areas for C&D waste disposal, having as a study area the Urban Central Core of Metropolitan Region of Curitiba. Keywords: Geographic Information System. Co

CAPES / Os resíduos oriundos da construção e demolição quando não têm uma destinação final adequada acarretam em problemas de ordem social, econômica e ambiental. O descarte que muitas vezes acontece em locais inapropriados, demonstra a necessidade de áreas para a correta disposição final em acordo com as normas vigentes. Visando a diminuição dos impactos causados por esse tipo de resíduos, buscando atender a legislação pertinente, a indicação de áreas aptas à implantação de aterros de resíduos de construção e demolição ou aterro classe A faz-se necessária. Para isso, foi utilizada a ferramenta de Sistema de Informação Geográfica (SIG), apoiada pela análise e decisão por multicritérios. O SIG utilizado como ferramenta base na identificação de possíveis áreas adequadas tem como vantagem: o baixo custo; maior rapidez no processo de tomada de decisão e a diversidade de cenários que podem ser analisados ao mesmo tempo, sendo de grande valia nas etapas de gerenciamento dos resíduos de construção e demolição. Integrando o SIG com a ferramenta de análise e tomada de decisão por multicritérios, tem-se como resultado a indicação de possíveis áreas aptas à implantação de aterros de construção civil e inertes para o Núcleo Central Urbano da Região Metropolitana de Curitiba. / The construction and demolition (C&D) waste when do not have a proper final disposal; result in social, economic and environmental problems. The disposal often happens in inappropriate locations and demonstrates the necessity of adequate areas for the waste final disposal but also the selected site must be in accordance with local standards and regulations. Considering all these facts, the aim of this work is to indicate possible suitable areas for C&D waste landfill, using the Geographic Information System (GIS) tool, supported by Multi-criteria Decision Analysis (MCDA). The GIS used as a basic tool to identify possible suitable areas has several advantages: low cost; faster decision-making process and various scenarios can be analyzed simultaneously, being a valuable tool in all the construction and demolition waste management steps. Integrating GIS with MCDA has resulted in the indication of possible suitable areas for C&D waste disposal, having as a study area the Urban Central Core of Metropolitan Region of Curitiba. Keywords: Geographic Information System. Co