Recently, the high radiance of synchrotron sources was used to enhance FTIR spectrometer performance. However, excessive channel spectra when synchrotron sources are used degrade the quality of retrieved spectral parameters. In the research reported in this thesis, seven different techniques for handling channel spectra were investigated. These techniques were used to reduce channel spectra for a test group of seven samples of CO2 mixed with air recorded using the synchrotron source at the Canadian Light Source. The increases in signal to noise ratio (SNR) of spectra handled with each technique were calculated. SNR results showed that transmission spectra, produced using synthetic background spectra with simulated channel spectra, achieved the highest SNR improvement. However, when the spectra groups were fitted using nonlinear least square fit algorithm, the technique using channel spectra fitting produced the smallest fitting residual. Moreover, the retrieved intensities and air broadening coefficients of 21 spectral lines showed that the spectral fitting technique produced the most accurate values as compared to the HITRAN 2008 database. Although the spectral fitting technique was accurate in retrieving spectral line parameters, applying the technique at wider spectral ranges was less accurate. A modification to the channel spectra fitting technique by performing iterations of channel fitting was introduced to process wider spectral ranges. Carbon dioxide laser band I centred at 961 wavenumber was analyzed using 24 spectra recorded under different experimental conditions. The intensity and air-and self-broadening coefficients were retrieved for 48 spectral lines with average deviations from HITRAN database values of 2.11%, 1.25% and 4.14%, respectively, using the Voigt profile. These average deviations lie within the uncertainty limits listed by the database. The deviation between our results and other results reported in the literature were also examined and it is found to be also within the range of HITRAN uncertainties. The effect of errors in fitting channel spectra parameters was examined and found to be mitigated by the inclusion of channel-free spectra in the multispectral fit. / xiv, 134 leaves : ill. ; 29 cm

Fourier transform infrared difference spectroscopy (FTIR DS) is widely used to study the structural details of electron transfer cofactors in photosynthetic protein complexes. In photosynthetic proteins quinones play an important role, functioning as a cofactor in light-driven electron transfer. In photosystem I (PS I) phylloquinone (PhQ) functions as an intermediary in electron transfer. To investigate the properties of PhQ that occupies the, so called, A1 binding site in PS I, time-resolved step-scan FTIR DS, with 5µs time resolution at 77K has been used. By replacing PhQ in the A1 binding site with specifically isotope labeled version, information on the vibrational frequencies associated specifically with the quinone in the binding site were obtained, which could be compared to the vibrational properties of quinone in solution or quinones in other protein binding sites. To further aid in assessing the origin of bands in the spectra, quantum mechanics /molecular mechanics (QM/MM) ONIOM type calculations were undertaken. ONIOM is an acronym for Our own N-layered Integrated molecular Orbital and molecular Mechanics. We find that the phytyl tail of PhQ does not play an important role in the orientation of PhQ in the A1 binding site. We also find that PhQ, in both neutral and reduced states, is strongly hydrogen bonded. To test and verify the applicability of our QM/MM approach, ONIOM calculations were also undertaken for ubiquinone and a variety of other quinones incorporated into the, so called, QA binding site in purple bacteria photosynthetic reaction centers. The calculated and experimental spectra agree well, demonstrating the utility and applicability of our ONIOM approach. Hydrogen bonding to the carbonyl groups of quinones in the QA binding site was shown to be relatively weak, and it was found that hydrogen bonding to neutral ubiquinone in purple bacterial reaction centers can be considered in purely electrostatic terms, contrary to the widely held belief that the hydrogen bonding amino acids should be treated quantum mechanically.

Nitrocellulose is the main component in many types of ammunition, propellants and explosives. The principles of production for nitrocellulose have not changed much since the 19th century when it started being industrially produced for this purpose. The character of the nitrocellulose has a large effect on the end products abilities. The aim of this study was to develop a method that would be able to characterise and distinguish between nitrocellulose from different manufacturers to be able to relate the character of the nitrocellulose to the properties of ammunition, propellants and explosives. Samples were dissolved in acetone and analysed by GC/MS and data were then analysed by multivariable statistics. FTIR was also used to characterise the nitrocellulose. Results from both methods showed very small differences when chromatograms and spectra were analysed. This study shows that GC/MS and FTIR are not suitable for this type of characterisation. The differences between the data were not sufficient to be able to separate the samples from each other. / Nitrocellulosa är den viktigaste komponenten i många typer av ammunition, drivmedel och sprängämnen. Principerna för produktionen av nitrocellulosa har inte förändrats mycket sedan det börjades produceras industriellt för detta ändamål på 1800 talet. Karaktären av nitrocellulosa har en stor inverkan på slutproduktens egenskaper. Syftet med denna studie var att utveckla en metod som skulle kunna karaktärisera och skilja mellan nitrocellulosa från olika tillverkare för att kunna relatera karaktären av nitrocellulosa till egenskaperna hos ammunition, drivmedel och sprängämnen. Proverna löstes i aceton och analyserades med GC/MS och data analyserades med multivariabel statistik. FTIR användes också för att karakterisera nitrocellulosan. Resultaten för båda proverna visade mycket små skillnader när kromatogram och spektra analyserades. Denna studie visar att GC/MS och FTIR inte är lämpliga för denna typ av karaktärisering. Skillnaderna i data var inte tillräckliga för att kunna skilja proverna från varandra.

Deposition of silica shells onto ZnO nanoparticles (NPs) in dimethyl sulfoxide was found to be an efficient tool for terminating the growth of ZnO NPs during thermal treatment and producing stable core–shell ZnO NPs with core sizes of 3.5–5.8 nm. The core–shell ZnO–SiO2 NPs emit two photoluminescence (PL) bands centred at [similar]370 and [similar]550 nm originating from the direct radiative electron–hole recombination and defect-mediated electron–hole recombination, respectively. An increase of the ZnO NP size from 3.5 to 5.8 nm is accompanied by a decrease of the intensity of the defect PL band and growth of its radiative life-time from 0.78 to 1.49 μs. FTIR spectroscopy reveals no size dependence of the FTIR-active spectral features of ZnO–SiO2 NPs in the ZnO core size range of 3.5–5.8 nm, while in the Raman spectra a shift of the LO frequency from 577 cm−1 for the 3.5 nm ZnO core to 573 cm−1 for the 5.8 nm core is observed, which can indicate a larger compressive stress in smaller ZnO cores induced by the SiO2 shell. Simultaneous hydrolysis of zinc(II) acetate and tetraethyl orthosilicate also results in the formation of ZnO–SiO2 NPs with the ZnO core size varying from 3.1 to 3.8 nm. However, unlike the case of the SiO2 shell deposition onto the pre-formed ZnO NPs, individual core–shell NPs are not formed but loosely aggregated constellations of ZnO–SiO2 NPs with a size of 20–30 nm are. The variation of the synthetic procedures in the latter method proposed here allows the size of both the ZnO core and SiO2 host particles to be tuned. / Dieser Beitrag ist aufgrund einer (DFG-geförderten) Allianz- bzw. Nationallizenz frei zugänglich.

This paper aims to investigate the embalming process and the Balanites aegyptiaca from two pottery originated in ancient Egypt. The two objects were from Medelhavsmuseet in Stockholm. Samples were collected and analyzed with Fourier transform infrared spectrometry (FTIR) and Gas chromatography/mass spectrometry to identify which components the samples contained. The results show complex mixtures mainly consisting of resin origin from Pinaceae and the vegetable oils from the Balanites aegyptiaca.

Specific Interactions in Carbon Dioxide + Polymer Systems Anupama Kasturirangan 163 Pages Directed by Dr. Amyn S. Teja Weak complex formation in CO2 + polymer and CO2 + copolymer systems containing C=O and C-F groups was quantified using in situ FTIR spectroscopy. The enthalpy of interaction thus obtained was directly incorporated into a lattice model and compressibility effects were accounted for via ratio of free volumes in modified segment number. CO2 + fluropolymer phase behavior could be correlated within experimental error (AAD of about 2%) using the new model, a task that has been beyond the capability of published models and it was also possible to predict phase equilibria of CO2 + PLGA copolymer systems with a single parameter obtained by fitting cloud point behavior in a reference system (CO2 + PLA in this case).New data on sorption equilibria in several CO2 + PLGA systems were obtained using a quartz crystal microbalance (QCM) and new data on Tg depression in the CO2 + PLA system were also obtained using a high pressure DSC method and used to demonstarte that model parameters are valid over extended pressure ranges. The new compressible lattice model developed is thus able to correlate cloud points, sorption equilibria, glass transition temperatures, and melting points using a single parameter. The model is therefore likely to be beneficial in many applications involving CO2 + polymer systems including drug delivery and encapsulation, polymer coating, and membranes for natural gas separations.

Τα ιοντικά υγρά (ΙΥ) έχουν κερδίσει το ενδιαφέρον των ερευνητών, λόγω των εξαιρετικών ιδιοτήτων τους σε εφαρμογές κατάλυσης, ηλεκτροχημείας, σύνθεσης και αναλυτικής χημείας καθώς και σε μεθόδους διαχωρισμού. Πρόκειται για ιοντικές ενώσεις που αποτελούνται από οργανικά κατιόντα και οργανικά/ανόργανα ανιόντα, τα οποία εμφανίζουν χαμηλό σημείο τήξης Τm<100oC. Η δομή και οι αλληλεπιδράσεις μεταξύ των ιοντικών υγρών καθορίζουν τις φυσικοχημικές τους ιδιότητες όπως είναι το χαμηλό σημείο τήξης, το χαμηλό ιξώδες, η χαμηλή τάση ατμών, η υψηλή αγωγιμότητα, η μη αναφλεξιμότητα αλλά και η δυνατότητα ανακύκλωσης. Η κατανόηση των διαμοριακών αλληλεπιδράσεων που λαμβάνουν χώρα σε αυτές τις δομές είναι απαραίτητη για την πρόβλεψη αλλά και τη σχεδίαση των ιδιοτήτων τους. Για να κατανοηθεί η δομή και οι αλληλεπιδράσεις στην υγρή φάση, στην παρούσα εργασία, μελετήθηκαν πρωτονιωμένα ιοντικά υγρά (ΠΙΥ) HCnImNTf2 (n=0-12) καθώς επίσης και τα τήγματα των αλκαλικών αλάτων ΜNTf2 (Μ:Li-Cs). Επίσης παρουσιάζεται o εγκλωβισμός τους σε μικροπορώδη υλικά για εφαρμογή τους σε κελιά καυσίμου. Κύριο χαρακτηριστικό των πρωτονιωμένων ιοντικών υγρών είναι ότι πέραν των ηλεκτροστατικών δυνάμεων που αναπτύσσονται μεταξύ τους, τα ανιόντα και τα κατιόντα συνδέονται και με ισχυρούς δεσμούς υδρογόνου. Στα συστήματα αυτά μελετήθηκε η επίδραση της θερμοκρασίας στη δομή τους με χρήση δονητικής φασματοσκοπίας FT-IR και FT-Raman καθώς και με διαφορική θερμιδομετρία σάρωσης. Από τη συγκεκριμένη μελέτη προέκυψε ότι στα συγκεκριμένα ιοντικά υγρά εμφανίζονται ηλεκτροστατικές και van der Waals αλληλεπιδράσεις, δεσμοί υδρογόνου καθώς και π-π αλληλεπιδράσεις. Επίσης διαπιστώθηκε ότι η αύξηση της θερμοκρασίας ευνοεί τη cis ισομέρεια του ανιόντος. Αντίθετα, στα τήγματα των αλάτων MNTf2 (Li-Cs) το ανιόν προτιμά την trans διαμόρφωση. Επίσης η μελέτη της επίδρασης του κατιόντος μελετώντας την επίδραση του κατιόντος στη δομή του ανιόντος οδήγησε στο συμπέρασμα ότι το ανιόν μπορεί να χρησιμοποιηθεί ως εσωτερικός δείκτης των αλληλεπιδράσεων που λαμβάνουν χώρα στα ΙΥ. Κατά τη μελέτη των σύνθετων υλικών βρέθηκε ότι κατά την εισαγωγή του ιοντικού υγρού στους ζεόλιθους λαμβάνει χώρα ιονανταλλαγή μεταξύ του κατιόντος του HMIm+του ΠΙΥ και των κατιόντων Na+του ζεόλιθου. Επίσης, παρουσιάστηκε αύξηση της ιοντικής τους αγωγιμότητας σχεδόν τέσσερις φορές, σε σχέση με την αγωγιμότητα της άνυδρης κατάστασης των κρυστάλλων του ζεόλιθου. / Ionic liquids (ILs) have received considerable attention due to their unique properties in applications in catalysis, electrochemistry, synthesis, analytical chemistry, and separations. They consist of organic cations and organic or inorganic anions and have melting points less than 100oC. Their interesting properties such as low melting points, extremely low vapor pressures, low viscosity, high electrochemical window, no flammability and the ability of being recycled depend on the intermolecular and inter-ionic interactions. Understanding how these interactions are affected by the IL cation alkyl substituents is of paramount importance in order to understand how the IL structure influences macroscopically measured properties and eventually design ILs with desired properties by tailoring their structure. The main interactions of between the PIL ions are Coulombic, van der Waals and hydrogen bonding. In order to understand the effect of these forces to their properties, I examined the effect of alkyl length chain and temperature on the structure of Protic Ionic Liquids (PILs) HCnImNTf2 (n=0-12) using vibrational spectroscopy (FT-Raman and FT-IR/ATR) and differential scanning calorimetry (DSC). A similar study was also carried to the alkali molten salts ANTf2 (A:Li-Cs). Finally the encapsulation of HC1ImNTf2 in zeolites was studied. The goal of this study was to increase the crystal conductivity to level that makes them suitable for PEM fuel cell applications. According to these studies, it was found that the ions interactive long range electrostatic interactions, van der Waals interaction, hydrogen bonds and pi-pi stacking interactions. Moreover, it was found that in PILs the cis conformation of the anion is favored with increasing temperatures, whereas, in case of alkaline molten salts MNTf2 (Li-Cs), trans conformation is dominant in the liquid state. Since the population of the two isomers is affected by the local environment of the anion it was concluded that the anion NTf2- can be used as an indirect mean of the interactions that occur in these systems. Finally, from the encapsulation of protic ionic liquid HMImNTf2 into the porosity of zeolite material, it was found that an ion exchange procedure take place between the cation HMIm+ of the ionic liquid and the cation Na+ of the zeolite. The electric conductivity of the zeolite crystals increased by three times under dry conditions

Les biosenseurs sont des dispositifs analytiques utilisés pour la détection de reconnaissance moléculaire. Ils consistent en un élément biologique immobilisé en contact intime avec un transducteur approprié qui convertit un signal biochimique en un signal électrique quantifiable. Leur principe est basé sur la reconnaissance d'une ou plusieurs molécules d'intérêt en solution (le ligand), par un composant biologique (le récepteur) étroitement lié au substrat transducteur. Le senseur réagit aux interactions récepteur-ligand et produit un signal mesurable, généralement proportionnel à la concentration du ligand fixé. Les biosenseurs sont déjà utilisés dans beaucoup de domaines différents, notamment dans le domaine médical (diagnostique et thérapeutique), le contrôle de l’environnement, et l’analyse et le monitoring de processus biotechnologiques. <p><p>La recherche concerne la mise au point d’un nouveau type de biosenseurs polyvalents à haute performance. Ces senseurs utilisent un élément de transduction optique dont la surface a été fonctionnalisée en vue de permettre la détection sélective d'interactions récepteur-ligand ainsi que le dosage des molécules fixées aux récepteurs. La technique utilisée pour la détection et le dosage est celle de la Spectroscopie ATR-FTIR (Spectroscopie Infra Rouge à Transformée de Fourrier en Réflexion Total Atténuée). Le système permet la détection directe, en temps réel, et sans marquage des molécules ciblées. La spectroscopie ATR-FTIR fournit une analyse des molécules sur base de leur empreinte spectrale infra rouge (IR) caractéristique, ce qui offre une mine d'informations pour identifier les ligands. Ce nouveau système de biosenseur, appelé BIA-ATR (Biospecific Interaction Analysis – Attenuated Total Reflection) est original et offre des avantages majeurs par rapport à la plus part des biosenseurs commercialement disponibles. Il fournit à l’utilisateur le spectre IR entier du ligand étudié, permettant non seulement le dosage quantitatif de ce dernier, mais aussi d’identifier sa nature intrinsèque. Un autre avantage est sa grande sensibilité ;le senseur BIA-ATR peut détecter la fixation de petites molécules et dans certains cas, aussi les réactions chimiques associées. <p><p>Le potentiel de cette nouvelle technologie de senseur est évalué dans ce travail par son application à plusieurs systèmes d’intérêt biologique et médical :la détection de protéines en milieux complexes, appliquée à la détection du Facteur VIII de coagulation du sang impliqué dans l’hémophilie de type A ;la fixation d’une petite molécule, le phosphate (phosphorylation), sur l’ATPase gastrique, un récepteur protéique de grande taille responsable de la sécrétion d’acide dans l’estomac et la détection et dosage d’un antibiotique, la vancomycine, utilisé en soins intensifs hospitaliers dans les cas d’infections bactériennes sévères à Staphylocoques dorés.<p> / Doctorat en Sciences / info:eu-repo/semantics/nonPublished

Un-doped, Er3+ doped (TiO2:Er3+) as well as Er3+/Yb3+ co-doped (TiO2:Er3+/Yb3+) nanocrystals with different concentrations of RE3+ (Er3+, Yb3+) were successfully synthesized using the sol-gel method. The powder X-ray diffraction (XRD) spectra revealed that all undoped and doped samples remained in anatase after annealing at 400°C. The presence of RE3+ ions in the TiO2 host lattice was confirmed by conducting elemental mapping on the samples using Scanning electron microscope (SEM) equipped with energy dispersive X-ray spectrometer (EDX), which was in agreement with X-ray photoelectron spectroscopy (XPS) results. Transmission electron microscope (TEM) images approximated particle sizes of the samples to be between 1.5 – 3.5 nm in diameter and this compares well with XRD analyses. Phonon quantification in TiO2 was achieved using Fourier transform infrared (FT-IR) spectroscopy. Optical bandgap from Ultraviolet/Visible/Near-Infrared was extrapolated from Kubelka-Munk relation and the narrowing of the bandgap for the doped samples as compared to the undoped sample was observed. The photoluminescence PL study of the samples revealed two emission peaks attributed to direct band-gap and defect-related emissions. A laser beam with 980 nm wavelength was used to irradiate the samples, and the displayed emission lines of the TiO2: Er3+ in the visible region of the electromagnetic spectrum confirmed up-conversion luminescence. Enhancement of up-conversion luminescence intensity due to Yb3+ co-doping was observed, indicating an efficient energy transfer process from the sensitizer Yb3+ to the activator Er3+. / Physics / M. Sc. (Physics)

Made available in DSpace on 2014-06-11T19:24:08Z (GMT). No. of bitstreams: 0 Previous issue date: 2010-08-05Bitstream added on 2014-06-13T18:51:43Z : No. of bitstreams: 1 caldas_mrgr_me_arafo.pdf: 492580 bytes, checksum: 6bbf6b8719f88e58ede102ebb27a6c6c (MD5) / Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES) / O objetivo deste trabalho, dividido em dois estudos, foi avaliar: (1) a influência dos tipos de ponteiras (fibra óptica e polímero) utilizadas em um aparelho fotoativador à base de LED (Ultrablue IS - DMC) sobre o grau de conversão e dureza de uma resina composta microhíbrida (FiltekTM Z250) e uma nanoparticulada (FiltekTM Supreme XT); e (2) a influência dos tipos de ponteiras (fibra óptica e polímero) utilizadas em um aparelho fotoativador à base de LED (Ultrablue IS - DMC) sobre a resistência à compressão de uma resina composta microhíbrida (FiltekTM Z250) e uma nanoparticulada (FiltekTM Supreme XT). No primeiro estudo, para os testes de grau de conversão (GC) e dureza, cinco corpos-de-prova com 4 mm de diâmetro e 2 mm de espessura (ISO 4049), foram confeccionados para cada grupo avaliado. O grau de conversão foi analisado pelo Espectrofotômetro Nexus - 470 FT-IR. Para o teste de dureza Vickers, os corpos-de-prova foram levados ao Durômetro Micromet 2100 (Buehler, EUA) onde foi utilizada uma carga de 50 gramas força (gf) e tempo de 30 segundos. Para cada corpo-de-prova oito medidas foram realizadas nas superfícies de topo e base. Os dados obtidos para o GC e dureza foram analisados estatisticamente pelo teste de Análise de Variância (ANOVA) e Tukey. No segundo estudo, para o teste de resistência à compressão foram confeccionados oito corpos-de-prova com 8 mm de altura e 4 mm de diâmetro. O teste foi realizado na máquina de ensaio universal EMIC com célula de carga de 5 kN à velocidade de 0,5 mm/min. Os dados obtidos foram analisados estatisticamente pelo teste ANOVA e o teste Tamhane. Os resultados demonstraram que o GC e dureza foram influenciados pelas ponteiras, sendo a dureza também influenciada pelo tipo de resina composta utilizada. A resina composta microhíbrida fotoativada com a ponteira de fibra óptica apresentou maiores valores do GC e dureza... / The aim of this work, divided into two studies, was evaluate: (1) the influence of types of light guide tips (fiber optic and polymer) used in a photo-activation based on LED (Ultrablue IS - DMC) on the degree of conversion and hardness one microhybrid FiltekTM Z250 and one nanofilled FiltekTM Supreme XT composite resins; and (2) the influence of types of light guide tips (fiber optic and polymer) used in a photo-activation based on LED (Ultrablue IS - DMC) on the compressive strength of one microhybrid FiltekTM Z250 and one nanofilled FiltekTM Supreme XT composite resins. In the first study, to test the degree of conversion (GC) and hardness, five samples 4 mm in diameter and 2 mm in thickness (ISO 4049) were made for each group evaluated. The degree of conversion was evaluated by Fourier transform infrared spectroscopy (FT-IR). For the Vickers hardness test, the samples were brought to the durometer Micromet 2100 (Buehler, USA) where was used a load of 50 gram force (gf) and time of 30 seconds. For each sample test measurements were performed eigth measures on the surfaces of top and bottom. The data obtained for the GC and hardness test were statistically analyzed by Analysis of Variance (ANOVA) and Tukey’s test. In the second study to test the compressive strength eight samples (4 mm in diameter and 8 mm in thickness) were made for each group evaluated, and the test was conducted in a universal testing machine EMIC with load cell 5 kN and speed of 0,5 mm/min. The data were statistically analyzed by ANOVA test and Tamhane’s test. The results showed that the GC and hardness were influenced by the light guide tip, and the hardness also influenced by the type of resin used. The microhybrid composite resin photo-activated with the fiber optic light tip had higher values of GC and hardness. The lowest values of GC and hardness were observed with nanofilled composite resin photoactivated... (Complete abstract click electronic access below)