The advent of large-scale and high-throughput technologies has recently caused a shift in focus in contemporary biology from decades of reductionism towards a more systemic view. Alongside the availability of genome sequences the exploration of organisms utilizing such approach should give rise to a more comprehensive understanding of complex systems. Domestication and intensive breeding of crop plants has led to a parallel narrowing of their genetic basis. The potential to improve crops by conventional breeding using elite cultivars is therefore rather limited and molecular technologies, such as marker assisted selection (MAS) are currently being exploited to re-introduce allelic variance from wild species. Molecular breeding strategies have mostly focused on the introduction of yield or resistance related traits to date. However given that medical research has highlighted the importance of crop compositional quality in the human diet this research field is rapidly becoming more important. Chemical composition of biological tissues can be efficiently assessed by metabolite profiling techniques, which allow the multivariate detection of metabolites of a given biological sample.<br><br> Here, a GC/MS metabolite profiling approach has been applied to investigate natural variation of tomatoes with respect to the chemical composition of their fruits. The establishment of a mass spectral and retention index (MSRI) library was a prerequisite for this work in order to establish a framework for the identification of metabolites from a complex mixture. As mass spectral and retention index information is highly important for the metabolomics community this library was made publicly available. Metabolite profiling of tomato wild species revealed large differences in the chemical composition, especially of amino and organic acids, as well as on the sugar composition and secondary metabolites. Intriguingly, the analysis of a set of <i>S. pennellii</i> introgression lines (IL) identified 889 quantitative trait loci of compositional quality and 326 yield-associated traits. These traits are characterized by increases/decreases not only of single metabolites but also of entire metabolic pathways, thus highlighting the potential of this approach in uncovering novel aspects of metabolic regulation. Finally the biosynthetic pathway of the phenylalanine-derived fruit volatiles phenylethanol and phenylacetaldehyde was elucidated via a combination of metabolic profiling of natural variation, stable isotope tracer experiments and reverse genetic experimentation. / Die Einführung von Hochdurchsatzmethoden zur Analyse von biologischen Systemen, sowie die umfangreiche Sequenzierung von Genomen haben zu einer Verlagerung der Forschung „im Detail“ zu einer ganzheitlicheren Betrachtungsweise auf Systemebene geführt. Aus einer jahrhundertlangen, intensiven Züchtung und Selektion von Nutzpflanzen resultierte gleichzeitig eine Abnahme der genetischen Varianz. Daraus resultierend sind Nutzpflanzen anfälliger gegenüber Stressfaktoren, wie Pathogenen, hohen Salzkonzentrationen oder Trockenheit, als ihre Wildarten. Das Potential konventioneller Züchtung scheint somit heute an seine Grenzen gekommen zu sein. Daher versucht man mittels moderner Molekulartechnik, wie zum Beispiel Marker-gestützte Selektion, Gene oder ganze Genombereiche von Wildarten mit hoher genetischer Variation in Nutzpflanzen einzukreuzen, vornehmlich mit dem Ziel einer Ertrags- bzw. Resistenzsteigerung. Neueste medizinische Studien belegen, dass die Ernährung eine wesentliche Rolle für die menschliche Gesundheit spielt. Besonders wichtig sind hierbei die gesundheitsfördernden Substanzen in pflanzlichen Nahrungsmitteln. Aus diesem Grund kommt der Erforschung der biochemischen Zusammensetzung von biologischen Proben eine immer größere Bedeutung zu. Diese Untersuchung kann elegant durch Metabolitenprofile, welche die multivariate Analyse komplexer biologischer Proben erlauben, durchgeführt werden.<br><br> In dieser Arbeit wurde zur Untersuchung der biochemischen Zusammensetzung von Tomatenwildarten und interspezifischen <i>S. pennellii</i> Tomatenintrogressionslinien (IL) eine GC/MS basierte Metabolitenanalyseplattform verwendet. Hierzu war es zunächst notwendig eine Massenspektrenbibliothek, zur Annotierung von Massenspektren und Retentionsindices von, in pflanzlichen Proben vorkommenden, Metaboliten anzulegen. Die Analyse der Tomatenwildarten ergab große Unterschiede gegenüber der Kulturtomate im Hinblick auf den Gehalt an Amino- und organischen Säuren, sowie der Zuckerzusammensetzung und den Gehalt an Sekundärmetaboliten. Die darauf folgende Analyse der ILs, von den jede ein genau definiertes genomisches Segment von <i>S. pennellii</i> beinhaltet, bestätigte diese enorme Variation mit 889 metabolischen und 326 ertragsassozierten-Veränderungen in den ILs. Die metabolischen Veränderungen zeichneten sich durch abnehmende bzw. steigende Gehalte von einzelnen Metaboliten, aber auch durch eine koordinierte Änderung aus. In dieser Arbeit wurde weiterhin der Biosyntheseweg der Volatilenstoffe Phenylethanol und Phenylacetaldehyd mit Hilfe einer IL untersucht. Hierbei konnten durch stabile Isotopenmarkierung und eines „reverse genetics“-Ansatzes Gene bzw. Enzyme identifiziert werden, die für die Dekarboxylierung des Eduktes Phenylalanin verantwortlich sind. Diese Arbeit beschreibt erstmals die umfassende Analyse von biochemischen Komponenten auf Genombasis in Tomatenintrogressionslinien und zeigt damit ein Werkzeug auf zur Identifizierung von qualitativen biochemischen Merkmalen in der modernen molekularen Züchtung.

There is an ever increasing need of new technologies for identification of molecular markers for early diagnosis of fatal diseases to allow efficient treatment. In addition, there is great value in finding patterns of metabolites, proteins or genes altered in relation to specific disease conditions to gain a deeper understanding of the underlying mechanisms of disease development. If successful, scientific achievements in this field could apart from early diagnosis lead to development of new drugs, treatments or preventions for many serious diseases.  Metabolites are low molecular weight compounds involved in the chemical reactions taking place in the cells of living organisms to uphold life, i.e. metabolism. The research field of metabolomics investigates the relationship between metabolite alterations and biochemical mechanisms, e.g. disease processes. To understand these associations hundreds of metabolites present in a sample are quantified using sensitive bioanalytical techniques. In this way a unique chemical fingerprint is obtained for each sample, providing an instant picture of the current state of the studied system. This fingerprint or picture can then be utilized for the discovery of biomarkers or biomarker patterns of biological and clinical relevance. In this thesis the focus is set on evaluation and application of strategies for studying metabolic alterations in human tissues associated with disease. A chemometric methodology for processing and modeling of gas chromatography-mass spectrometry (GC-MS) based metabolomics data, is designed for developing predictive systems for generation of representative data, validation and result verification, diagnosis and screening of large sample sets. The developed strategies were specifically applied for identification of metabolite markers and metabolic pathways associated with prostate cancer disease progression. The long-term goal was to detect new sensitive diagnostic/prognostic markers, which ultimately could be used to differentiate between indolent and aggressive tumors at diagnosis and thus aid in the development of personalized treatments. Our main finding so far is the detection of high levels of cholesterol in prostate cancer bone metastases. This in combination with previously presented results suggests cholesterol as a potentially interesting therapeutic target for advanced prostate cancer. Furthermore we detected metabolic alterations in plasma associated with metastasis development. These results were further explored in prospective samples attempting to verify some of the identified metabolites as potential prognostic markers.

This thesis is based on studies in which the suitability of various gas chromatography (GC) injection techniques was examined for the determination of polybrominated diphenyl ethers (PBDEs) and carbazoles, two groups of compounds that are thermally labile and/or have high boiling-points. For such substances, it is essential to introduce the samples into the GC system in an appropriate way to avoid degradation and other potential problems. In addition, different types of gas chromatographic column system and mass spectrometric detectors were evaluated for the determination of PBDEs. Conventional injectors, such as splitless, on-column and programmed temperature vaporizing (PTV) injectors were evaluated and optimized for determination of PBDEs. The results show on-column injection to be the best option, providing low discrimination and high precision. The splitless injector is commonly used for “dirty” samples. However, it is not suitable for determination of the high molecular weight congeners, since it tends to discriminate against them and promote their degradation, leading to poor precision and accuracy. The PTV injector appears to be a more suitable alternative. The use of liners reduces problems associated with potential interferents such as polar compounds and lipids and compared to the hot splitless injector, it provides gentler solvent evaporation, due to its temperature programming feature, leading to low discrimination and variance. Increasing the injection volume from the conventional 1-3 µL to &gt;50 µL offers two main benefits. Firstly, the overall detection and quantification limits are decreased, since the entire sample extract can be injected into the GC system. Secondly, large volume injections enable hyphenation of preceding techniques such as liquid chromatography (LC), solid phase extraction and other kinds of extraction. Large-volume injections were utilized and optimized in the studies included in this thesis. With a loop-type injector/interface large sample volumes can be injected on-column providing low risk of discrimination against compounds with low volatility. This injector was used for the determination of PBDEs in air and as an interface for the determination of carbazoles by LC-GC. Peak distortion is a frequently encountered problem associated with this type of injector that was addressed and solved during the work underlying this thesis. The PTV can be used as a large volume injector, in so-called solvent vent mode. This technique was evaluated for the determination of PBDEs and as an interface for coupling dynamic sonication-assisted solvent extraction online to GC. The results show that careful optimization of the injection parameters is required, but also that the PTV is robust and yields reproducible results. PBDEs are commonly detected using mass spectrometry in electron capture negative ionization (ECNI) mode, monitoring bromine ions (m/z 79 and 81). The mass spectrometric properties of the fully brominated diphenyl ether, BDE-209, have been investigated. A high molecular weight fragment at m/z 486/488 enables the use of 13C-labeled BDE-209 as an internal surrogate standard.

La pollution des eaux est particulièrement problématique pour les pays industrialisés et les pays en développement. Des suivis environnementaux se sont alors avérés nécessaires afin de progresser dans la compréhension des origines et des conséquences de la présence de ces polluants. Parmi les polluants organiques les plus dangereux, les Hydrocarbures Aromatiques Polycycliques (HAP) et les pesticides qui peuvent se retrouver à l'état de traces dans les milieux aquatiques. Leur analyse nécessite des méthodes analytiques à la fois spécifiques et sensibles. L'Extraction sur Phase Solide (SPE) suivi d'une analyse par la Chromatographie Gazeuse couplée à la Spectrométrie de Masse (GC-MS) est la méthode la plus couramment employée. Les travaux de thèse s'inscrivent ainsi dans l'optique générale visant à développer des nouvelles méthodes analytiques pour l'extraction et l'analyse de ces deux familles de polluants organiques présents dans l'eau. Afin de pallier les contraintes classiques de la SPE, une nouvelle approche a été développée qui consiste à introduire la technique de centrifugation dans certaines étapes de la procédure SPE. La nouvelle méthode élaborée a permis de réduire considérablement le temps de préparation et d'économiser l'utilisation et le rejet des solvants organiques, en réduisant presque 10 fois les volumes nécessaires à l'obtention des rendements de récupération satisfaisants. Une méthode d'analyse par injection à température programmable (PTV) a été optimisée afin d'améliorer les seuils de détection des HAP. Cette étude a permis également d'avoir les informations sur la qualité des eaux de pluie, eaux souterraines et eaux de surface au Liban quant au niveau de leur contamination pour les HAP et les pesticides.

In this study, the Persistent Organic Pollutants (POPs) specifically / 17 Organochlorine Pesticides (OCPs) and 19 Polycyclic Aromatic Hydrocarbons (PAHs) were evaluated in the sediment samples of Balikesir (Ikizcetepeler) Dam Lake. Sixteen sampling points were chosen for determination of concentrations of OCPs and PAHs After ultrasonic bath extraction of the sediment samples GC-MS was used as analytical tool. Extraction efficiencies changes from 63.8 to 87.4% depending on the type of the POPs. Average OCP concentration was found in the range of 3.33-379 &micro / g/kg a, average PAH concentration was found in the range of 3.28-32.9 &micro / g/kg. Pollution maps regarding OCP and PAH distributions were drawn and the correlation between these two pollutant types was investigated. The quality control (QC) and quality assurance tests were applied by the analysis of standard reference materials (SRMs), surrogate standards and analysis replicates.

Diss. (sammanfattning) Umeå : Umeå universitet, 2010. / Härtill 4 uppsatser.

The dairy food industry is continuously striving towards products with higher quality and longer shelf-life available to the customer at low prices. Arla Foods in Linköping, Sweden, is currently investigating the possibilities of changing the material in yogurt packaging containers by replacing the currently used carton with a different and cheaper alternative. A successful switch will give the company an economical advantage without affecting the sensory attributes (smell, taste, sight, and consistency), aroma profile or other important trademarks of the yogurt. This study is designed to examine and compare yogurt that has been stored in different packaging cartons, one coated with a single-layered low-density polyethylene (LDPE) and one coated with a currently used multi-layered ethylene-vinyl alcohol (EVOH). The study was based on the analysis and measurement of sensory attributes performed by experts, physical properties in laboratory and chemical composition in GC-FID/MS together with a discriminative test where a group of people would identify any difference between the yogurts. Together, these analyses would provide an explanation about any differences between the packaging materials by connecting physical, chemical and/or sensory characteristics. The collected results would give a better and more comprehensive picture than each analysis would do separately. The results from the study show that there is a difference between yogurts stored in LDPE-based containers and yogurts stored in EVOH-based containers and that the product was chemically affected, mainly by the level of oxygen in contact with the food. The overall assessment is that the largest difference was discovered in the taste.

Plant-pollinator interactions figure as key elements promoting the natural regeneration of terrestrial vegetation, as most plants depend on animals to transfer their gametes between flowers and produce seeds. Bees are the most common pollinators of plants and their interactions with flowers have served as model systems for the study of specialized mutualisms since Darwin's time. While most plants offer nectar as a reward and attract a variety of floral visitors, others produce distinctive types of resources which are sought by particular groups of pollinators. Such associations may involve specialization at the morphological, behavioral, or physiological levels and are especially common in tropical habitats. The interactions between oil-producing flowers of Neotropical Malpighiaceae and oil-collecting bees are an example of a specialized mutualism in which plants offer lipids to attract pollinators that use the resource to build nest cells and feed their offspring. Although several studies have focused on specialized pollination at the species level, their effects on the organization of tropical communities remain largely unexplored. This dissertation aims to help fill this gap through an analysis of the mechanisms of pollinator partitioning in multi-species assemblages of specialists as well as a study of the organization of communities in which they occur. The motivation for pursuing the study of specialized interactions using Neotropical species of Malpighiaceae as a model system is outlined in the first chapter. In Chapter 2, I present an evaluation of the structural properties of a plant-pollinator community from the Cerrado, a seasonal ecosystem that hosts a large diversity of oil flowers. The third chapter analyzes pollinator partitioning and reproductive strategies promoting the coexistence of closely related Malpighiaceae. A possible outcome for the selective pressures imposed by the coexistence of specialists is presented in Chapter 4 by a case study providing evidence for a shift from specialized to generalized pollination in a Neotropical Malpighiaceae species. The last chapter includes reports of active floral oil foraging by males of Tetrapedia and a description of an oil storage structure without precedence among bees and unique to males of this genus suggesting that floral oils may also play a role in bees mating systems. / text

Grâce au développement des technologies de métagénomique au cours des dix dernières années, il a été constaté que les micro-organismes représentent la plus grande ressource de diversité métabolique et génétique sur Terre. En effet, un gramme de sol contient 109 cellules bactériennes et 103-104 différentes espèces bactériennes. Certaines sont en mesure de réaliser des réactions enzymatiques conduisant à la dégradation complète de certains polluants toxiques pour l'environnement comme les composés organiques tels que la quinoléine. Cependant, l'immense réservoir de molécules et enzymes microbiennes n'a pas encore été exploité, car plus de 99% d'entre elles ne sont, pour l'instant, pas cultivables in vitro. Mon travail s'inscrit dans le cadre d'une collaboration entre l'Université SJTU (Shanghai Jiao Tong Université en Chine) et le groupe de G. M.E (Génomique Microbienne Environmentale) du laboratoire Ampère à l'Ecole Centrale de Lyon. Nos partenaires à l'Université SJTU ont construit un réacteur de dénitrification à l'échelle du laboratoire capable de dégrader la quinoléine en retirant la demande chimique en oxygène. Un nouvel outil appelé "Genefish" a été developpé dans notre laboratoire comme une méthode alternative de la métagénomique pour aider à la découverte de nouveaux gènes d'intérêt industriel ou environnemental. A la suite des premiers travaux réalisés dans notre laboratoire, ma thèse présentée ici comporte deux parties.Dans la première partie de ce travail, nous avons étudié le potentiel de dégradation de la quinoléine présente dans les bactéries d'un sol de référence largement étudié au laboratoire. Pour cela nous avons mis en place des expériences de microcosme qui visent à révéler la diversité potentielle des bactéries responsables de la dégradation de la quinoléine. Des analyses comparatives des profils RISA (Ribosomal Intergenic Spacer analysis) nous ont permis de mettre en évidence des changements dans la structure de la communauté des bactéries du sol incubé en conditions aérobie et anaérobie en présence de quinoléine. La dégradation de la quinoléine a été confirmée par technique de GC/MS (Gas Chromatography-Mass Spectrometry). Les travaux futurs seront de vérifier la communauté de bactéries responsables de la dégradation de quinoléine en utilisant la technique de NGS (Next Generation Sequencing).Le deuxième objectif de ma thèse a été d'utiliser Genefish dont la finalité est de capturer des gènes ciblés (le gène bcr qui serait responsable de la degradation de quinoléine dans le réacteur de nos partenaires) dans l'ADN métagénomique extrait du sol. Genefish consiste à élaborer une souche d'E.coli incluant un plasmide de capture permettant de pêcher les gènes recherchés dans un échantillon d'ADN metagénomique par recombinaison homologue. Le plasmide de capture comprend une cassette de deux gènes toxiques pour la souche qui activés par induction chimique vont permettre la sélection positive directe des clones recombinants, et deux sites multiples de clonage dans lesquels sont insérées les zones de recombinaison qui vont jouer le rôle d'hameçons. Nous avons testé la capacité de Genefish à capturer des produits PCR du gène bcr, l'efficacité de recombinaison reste faible à cause de la persistance de plusieurs copies du plasmide suicide dans la cellule après l' évenement de recombinaison. Par conséquent, trois stratégies ont été essayées pour améliorer l'efficacité: la co-électroporation, la ségrégation de plasmide et la construction de plasmide suicide en mono-copie. Finalement, la stratégie de la ségrégation plasmidique fonctionne mais l'efficacité de recombinaison est encore trop faible peut-être due à l'incertitude des modèles de recombinaison homologue. Les travaux futurs se concentreront sur l'amélioration des fréquences de recombinaison par transfert de fragments du plasmide de capture dans le chromosome de la souche Genefish.

Blueberry spanworm, Itame argillacearia (Packard), is an important defoliator of wild (syn. ‘lowbush’) blueberry in north-eastern North America. Identification of I. argillacearia sex pheromone(s) could be useful for monitoring, mating disruption or mass trapping, as a way to improve integrated pest management programs for this pest. Thus, the main goal of this study was to identify sex pheromone(s) of I. argillacearia. The courtship, mating and oviposition patterns of I. argillaceara, was studied in the laboratory. GC/MS, GC/EAD and EAG analysis of pheromone gland extracts, in combination with y-tube experiments and two field trapping studies confirmed the chiral-alkenyl-epoxide, (3R,4S)-epoxy-(Z,Z)-6,9-17:H and tri-ene, (Z,Z,Z)-3,6,9-17:H as the major female-produced sex pheromone components. Contech Wing traps® placed at canopy level were effective for capturing male I. argillacearia moths.