In recent years, electrochemical capacitors have emerged as devices with the potential to enable major advances in electrical energy storage. Electrochemical capacitors (ECs) are akin to conventional capacitors but employ higher surface-area electrodes and thinner dielectrics to achieve larger capacitances. This helps ECs to attain energy densities greater than those of conventional capacitors and power densities greater than those of batteries. Akin to conventional capacitors, ECs also have high cycle-lives and can be charged and discharged rapidly. But ECs are yet to match the energy densities of mid to high-end batteries and fuel cells. On the basis of mechanism involved in the charge-storage process, ECs are classified as electrical double-layer capacitors (EDLCs) or pseudocapacitors. Charge storage in EDLCs and pseudocapacitors is brought about by non-faradaic and faradaic processes, respectively. Faradaic process, such as an oxidation-reduction reaction, involves the transfer of charge between electrode and electrolyte. By contrast, a non-faradaic process does not use a chemical mechanism and charges are distributed on surfaces by physical processes that do not involve any chemical reaction. ECs employ both aqueous and non-aqueous electrolytes in either liquid or solid form, the latter providing the advantages of freedom from leakage of any liquid component, compactness, reliability and large operating potential-window. In the literature, polymer electrolytes are the most widely studied solid electrolytes. Complexation of functional-groups of certain polymers with cations results in the formation of polymer-cation complexes commonly referred to as solid-polymer electrolytes (SPEs). Mixing a polymer with an alkali metal salt dissolved in an organic solvent result in the formation of a polymer gel electrolyte. Organic solvents with low molecular-weights, such as ethylene carbonate and propylene carbonate, employed in polymer gel electrolytes are commonly referred to as plasticizers. When water is used as a plasticizer, the polymer electrolyte is called a polymer hydrogel electrolyte. Part I of the thesis is directed to studies pertaining to Polymer Hydrogel Electrolytes for Electrochemical Capacitors and comprises four sections. After a brief survey of literature on polymer hydrogel electrolytes employed in ECs in Section I.1, Section I.2 of Part I describes the studies on electrochemical capacitors employing cross-linked poly (vinyl alcohol) hydrogel membrane electrolytes with varying perchloric acid dopant concentration. Acidic poly (vinyl alcohol) hydrogel membrane electrolytes (PHMEs) with different perchloric acid concentrations are prepared by cross-linking poly (vinyl alcohol) with glutaraldehyde in the presence of a protonic acid acting as a catalyst under ambient conditions. PHMEs are characterized by scanning electron microscopy and temperature-modulated differential scanning calorimetry in conjunction with relevant electrochemical techniques. An optimised electrochemical capacitor assembled employing PHME in conjunction with black pearl carbon (BPC) electrodes yields a maximum specific capacitance value of about 96 F g-1, phase angle value of about 79o and a discharge capacitance value of about 88 F g-1. Section I.3 of Part I describes the studies on cross-linked poly (vinyl alcohol)/ploy (acrylic acid) blend hydrogel electrolytes for electrochemical capacitors. Acidic poly (vinyl alcohol)/poly (acrylic acid) blend hydrogel electrolytes (BHEs) have been prepared by cross-linking poly (vinyl alcohol)/poly (acrylic acid) blend with glutaraldehyde in presence of perchloric acid. These acidic BHEs have been treated suitably to realize alkaline and neutral BHEs. Thermal characteristics and glass-transition behavior of BHEs have been followed by differential scanning calorimetry. Ionic conduction in acidic BHEs has been found to take place by Grötthus-type mechanism while polymer segmental motion mechanism is predominantly responsible for ion motion in alkaline and neutral BHEs. Ionic conductivity of BHEs has been found to range between 10-3 and 10-2 S cm-1 at 298 K. Electrochemical capacitors assembled with acidic PVA hydrogel electrolyte yield a maximum specific capacitance of about 60 and 1000 F g-1 with BPC and RuOx.xH2O/C electrodes, respectively. Section I.4 of Part I describes the studies on gelatin hydrogel electrolytes and their application to electrochemical capacitors. Gelatin hydrogel electrolytes (GHEs) with varying NaCl concentrations have been prepared by cross-linking an aqueous solution of gelatin with aqueous glutaraldehyde under ambient conditions, and characterized by scanning electron microscopy, temperature-modulated differential scanning calorimetry, cyclic voltammetry, electrochemical impedance spectroscopy and galvanostatic chronopotentiometry. Glass transition temperatures for GHEs range between 340 and 377 K depending on the dopant concentration. Ionic conductivity behavior of GHEs is studied with varying concentrations of gelatin, glutaraldehyde and NaCl, and conductivity values are found to vary between 10-3 and 10-1 S cm-1 under ambient conditions. GHEs have a potential window of about 1 V with BPC electrodes. The ionic conductivity of pristine and 0.25 N NaCl-doped GHEs follows Arrhenius behavior with activation energy values of 1.9×10-4 and 1.8×10-4 eV, respectively. Electrochemical capacitors employing GHEs in conjunction with black pearl carbon electrodes are assembled and studied. Optimal values for capacitance, phase angle, and relaxation time constant of about 81 F g-1, 75o, and 0.03 s are obtained for 3 M NaCl-doped GHE, respectively. EC with pristine GHE exhibits continuous cycle life for about 4.3 h as against 4.7 h for the electrochemical capacitor with 3 M NaCl-doped GHE. Unlike electrochemical capacitors, fuel cells do not store the charge internally but instead use a continuous supply of fuel from an external storage tank. Thus, fuel cells have the potential to solve the most challenging problem associated with the electrochemical capacitors, namely their limited energy-density. A fuel cell is an electrochemical power source with advantages of both the combustion engine and the battery. Like a combustion engine, a fuel cell will run as long as it is provided with fuel; and like a battery, fuel cells convert chemical energy directly to electrical energy. As an electrochemical power source, fuel cells are not subjected to the Carnot limitations of combustion (heat) engines. A fuel cell operates quietly and efficiently and, when hydrogen is used as a fuel, it generates only power and potable water. Thus, a fuel cell is a so called ‘zero-emission engine’. In the past, several fuel cell concepts have been tested in various laboratories but the systems that are being potentially considered for commercial developments are: (i) Alkaline Fuel Cells (AFCs), (ii) Phosphoric Acid Fuel Cells (PAFCs), (iii) Polymer Electrolyte Fuel Cells (PEFCs), (iv) Solid-Polymer-Electrolyte-Direct Methanol Fuel Cells (SPE-DMFCs), (v) Molten Carbonate Fuel Cells (MCFCs) and (vi) Solid Oxide Fuel Cells (SOFCs). Among the aforesaid systems, PEFCs that employ hydrogen as fuel are considered attractive power systems for quick start-up and ambient-temperature operations. Ironically, however, hydrogen as fuel is not available freely in the nature. Accordingly, it has to be generated from a readily available hydrogen carrying fuel such as natural gas, which needs to be reformed. But, such a process leads to generation of hydrogen with some content of carbon monoxide, which even at minuscule level is detrimental to the fuel cell performance. Pure hydrogen can be generated through water electrolysis but hydrogen thus generated needs to be stored as compressed / liquefied gas, which is cost-intensive. Therefore, certain hydrogen carrying organic fuels such as methanol, ethanol, propanol, ethylene glycol, and diethyl ether have been considered for fuelling PEFCs directly. Among these, methanol with a hydrogen content of about 13 wt. % (specific energy = 6.1 kWh kg-1) is the most attractive organic liquid. PEFCs using methanol directly as fuel are referred to as SPE-DMFCs. But SPE-DMFCs suffer from methanol crossover across the polymer electrolyte membrane, which affects the cathode performance and hence the cell performance during its operation. SPE-DMFCs also have inherent limitations of low open-circuit-potential and low electrochemical-activity. An obvious solution to the aforesaid problems is to explore other promising hydrogen carrying fuels such as sodium borohydride, which has a hydrogen content of about 11 wt. %. Such fuel cells are called direct borohydride fuel cells (DBFCs). Part II of the thesis includes studies on direct borohydride fuel cells and comprises three sections. After a brief introduction to DBFCs in section II.1, Section II.2 describes studies on an alkaline direct borohydride fuel cell with hydrogen peroxide as oxidant. A peak power density of about 150 mW cm-2 at a cell voltage of 540 mV could be achieved from the optimized DBFC operating at 70oC. Section II.3 describes studies on poly (vinyl alcohol) hydrogel membrane as electrolyte for direct borohydride fuel cells. This DBFC employs a poly (vinyl alcohol) hydrogel membrane as electrolyte, an AB5 Misch metal alloy as anode, and a gold-plated stainless steel mesh as cathode in conjunction with aqueous alkaline solution of sodium borohydride as fuel and aqueous acidified solution of hydrogen peroxide as oxidant. The performance of the PHME-based DBFC in respect of peak power outputs, ex-situ cross-over of oxidant, fuel, anolyte and catholyte across the membrane electrolytes, utilization efficiencies of fuel and oxidant as also cell performance durability under ambient conditions are compared with a similar DBFC employing a Nafion®-117 membrane electrolyte (NME). Peak power densities of about 30 and 40 mW cm-2 are observed for the DBFCs with PHME and NME, respectively. The PHME and NME-based DBFCs exhibit cell potentials of about 1.2 and 1.4 V, respectively, at a load current density of 10 mA cm-2 for 100 h. Publications of Nurul Alam Choudhury 1. Gelatin hydrogel electrolytes and their application to electrochemical supercapacitors, N. A. Choudhury, S. Sampath, and A. K. Shukla, J. Electrochem. Soc., 155 (2008) A74. 2. Cross-linked polymer hydrogel electrolytes for electrochemical capacitors, N. A. Choudhury, A. K. Shukla, S. Sampath, and S. Pitchumani, J. Electrochem. Soc., 153 (2006) A614. 3. Hydrogel-polymer electrolytes for electrochemical capacitors: an overview, N. A. Choudhury, S. Sampath, and A. K. Shukla, Energy and Environmental Science (In Press). 4. Cross-linked poly (vinyl alcohol) hydrogel membrane electrolytes with varying perchloric acid dopant concentration and their application to electrochemical capacitors, N. A. Choudhury, S. Sampath, and A. K. Shukla, J. Chem. Sc. (Submitted) 5. An alkaline direct borohydride fuel cell with hydrogen peroxide as oxidant, N. A. Choudhury, R. K. Raman, S. Sampath, and A. K. Shukla, J. Power Sources, 143 (2005) 1. 6. Poly (vinyl alcohol) hydrogel membrane as electrolyte for direct borohydride fuel cells, N. A. Choudhury, S. K. Prashant, S. Pitchumani, P. Sridhar, and A. K. Shukla, J. Chem. Sc. (Submitted). 7. A phenyl-sulfonic acid anchored carbon-supported platinum catalyst for polymer electrolyte fuel cell electrodes, G. Selvarani, A. K. Sahu, N. A. Choudhury, P. Sridhar, S. Pitchumani, and A. K. Shukla, Electrochim. Acta, 52 (2007) 4871. 8. A high-output voltage direct borohydride fuel cell, R. K. Raman, N. A. Choudhury, and A. K. Shukla, Electrochem. Solid-State Lett., 7 (2004) A 488. 9. Carbon-supported Pt-Fe alloy as a methanol-resistant oxygen-reduction catalyst for direct methanol fuel cells, A. K. Shukla, R. K. Raman, N. A. Choudhury, K. R. Priolkar, P. R. Sarode, S. Emura, and R. Kumashiro, J. Electroanal. Chem., 563 (2004) 181.

Conselho Nacional de Desenvolvimento Científico e Tecnológico / Coordenação de Aperfeiçoamento de Pessoal de Nível Superior / Fundação de Amparo a Pesquisa do Estado de Minas Gerais / Os desenvolvimentos teóricos e experimentais na área de biomateriais têm sido aplicados diretamente a distintos campos da Medicina (odontologia, medicina regenerativa e radioterapia). Esses avanços foram concentrados tanto para diagnosticar doenças como para a quantificação de seus graus de progressão. Na perspectiva desses estudos, biomateriais estão sendo projetados e confeccionados para aplicação em diversas áreas da ciência, proporcionado avanços no radiodiagnóstico, na dosimetria para radioterapia e na calibração de equipamentos radioterápicos. Desenvolver um phantom a partir de um biomaterial se tornou um grande aliado da Medicina no tratamento de pacientes com doenças oncológicas, possibilitando melhor desempenho dos equipamentos, com a finalidade de redução dos danos causados ao tecido sadio devido ao excesso de exposição à radiação. Este trabalho utilizou polímeros: quitosana e gelatina para confecção das estruturas poliméricas e foi possível controlar as diferentes formas de produção e processamento, caracterizar e avaliar o biopolímero por técnicas físicas (ELT,MEV, e DEI) e, por consequência, analisar a aplicabilidade como phantom pulmonar de camundongo. Foi possível avaliar a morfologia dos biomateriais quantitativamente por microscopia eletrônica de varredura associada a técnica de imagem. A relevância deste trabalho se concentra em desenvolver um phantom a partir de biomateriais poliméricos que possa atuar como objeto simulador fornecendo alto contraste de imagem quando submetido a análise. Dessa forma, a escolha da técnica DEI foi satisfatória uma vez que trata-se de uma técnica de imagem de raios X de alta resolução. As imagens obtidas por DEI têm mostrado os detalhes da microestrutura interna dos biomateriais produzidos as quais possuem ≈ 10 μm de dimensão. Os phantoms confeccionados apresentaram densidade variando de 0,08 a 0,13 g/cm3. / The theoretical and experimental developments in the biomaterials area have been directly applied to different fields of Medicine (odontology, regenerative medicine and radiotherapy). These advances have focused both for diagnosing diseases such as for quantifying degrees of progression. From the perspective of these studies, biomaterials are being designed and manufactured for application in various areas of science, provided advances in diagnostic radiology, radiotherapy dosimetry and calibration of radiotherapy equipment. Develop a phantom from a biomaterial has become a great ally of medicine in the treat patients with oncological diseases, allowing better performance of the equipment in order to reduce damage to healthy tissue due to excessive exposure to radiation. This work used polymers: chitosan and gelatin, for making the polymeric structures and controlled for different types of production and processing, characterizing and evaluating the biopolymer by physical techniques (STL, SEM and DEI) and therefore analyze applicability as phantom mouse lung. It was possible to evaluate the morphology of biomaterials quantitatively by scanning electron microscopy associated with imaging technique. The relevance of this work focuses on developing a phantom from polymeric biomaterials that can act as phantom providing high image contrast when subjected to analysis. Thus, the choice of DEI technique is satisfactory since it is an imaging technique of X-ray high resolution. The images obtained by DEI have shown the details of the internal microstructure of the biomaterial produced which have ≈ 10 μm dimension. The phantoms had made density ranging from 0.08 a 0.13 g/cm3. / Tese (Doutorado)

Biological hydrogels such as collagen and gelatin are highly attractive materials for tissue engineering and biomedicine. Due to their excellent biocompatibility and biodegradability, they represent promising candidates in regenerative medicine, cell culture, tissue replacement and wound dressing applications. Thereby, precisely tuned material properties are indispensable for customization. High-energy electron-treatment is a highly favourable crosslinking technique to tailor the material properties. In five sub-projects, this thesis investigates the potential of high-energy electron-treatment to precisely modify collagen hydrogels, to develop thermo- as well as hydration-sensitive systems and functional surfaces from gelatin for biomedical applications. The first sub-project focusses on the modification of collagen hydrogels by electron-induced crosslinking with potential application as biomimetic extracellular matrix material. Thereby, it is shown that the material properties can be precisely tailored by adapting electron-induced crosslinking while high cytocompatibility is maintained. Within the second sub-project, an electron-crosslinking-induced shape-memory effect in gelatin is described in order to develop a thermo-responsive system. The effect is described experimentally as well as theoretically to demonstrate the fundamental physical processes. The third sub-project develops an electroncrosslinked hydration-sensitive gelatin system. The work discusses how swelling of electroncrosslinked gelatin is influenced by the pH-value and salt concentration of the swelling liquid. Thereby, response of the hydration-sensitive gelatin system can be further modified towards biological actuatoric systems. The fourth sub-project develops a two-step process to mechanically pattern gelatin surfaces. Within the first step, thin gelatin surfaces are mechanically patterned by a highly focussed electron beam. In a second step, they are stabilized by homogeneous electron-crosslinking for applications at physiological conditions. Another method to develop functional gelatin surfaces is described in the last sub-project. Here, gelatin is topographically patterned via a moulding technique. The resulting micro-structures are then stabilized via electron-crosslinking. In addition, the presented work investigates pattern transfer, long time stability at physiological conditions as well as cytocompatibility.:1 Introduction and Objective 1.1 Biomimetic ECM Models 1.2 Stimuli-Responsive Hydrogels 1.3 Functional Hydrogel Surfaces 2 General Background 2.1 Hydrogels 2.1.1 Collagen 2.1.2 Gelatin 2.2 Polymer Crosslinking 2.2.1 High-Energy Electron-Treatment of Polymers 2.2.2 Electron-Irradiation-Induced Crosslinking of Gelatin 2.3 High-Energy Electron Accelerator 3 Cumulative Part 3.1 High-Energy Electron-Induced Modification of Collagen 3.2 Thermo-Responsive Gelatin System 3.3 Hydration-Responsive Gelatin System 3.4 Mechanically Patterned Gelatin Surfaces 3.5 Topographically Patterned Gelatin Surfaces 4 Summary and Conclusion 5 Outlook Bibliography Author Contributions List of Abbreviations List of Figures Acknowledgements Scientific Curriculum Vitae Publication List Selbstständigkeitserklärung / Biologische Hydrogele wie Kollagen und Gelatine sind wichtige Materialien vor allem in biomedizinischen Anwendungsbereichen. Durch deren exzellente Biokompatibilität und biologische Abbaubarkeit werden sie vor allem bei der Züchtung von biomimetischem Gewebe, in der Zellkultur, als Gewebeersatz in der regenerativen Medizin oder auch als Wundverband eingesetzt. In der Verwendung solcher Materialien besteht eine wesentliche Herausforderung darin, deren Eigenschaften so präzise wie möglich einzustellen, um speziell angepasste Substrate und Gewebe entwickeln zu können. Eine äußerst vorteilhafte Methode zu Adaptierung der Materialeigenschaften ist die elektronenstrahlbasierte Vernetzung, die auf die Verwendung zusätzlicher chemischer Vernetzer verzichtet. Die vorgelegte Arbeit untersucht in fünf Teilprojekten das Potential von Elektronenstrahlvernetzung zur Modifizierung von Kollagen- sowie Gelatinehydrogelen für biomedizinische Anwendungen. Das erste Teilprojekt fokussiert sich auf die Auswirkungen hochenergetischer Elektronen auf Kollagenhydrogele und deren Eigenschaften für potentielle Anwendungen als biomimetisches Modell der extrazellulären Matrix. Dabei wird gezeigt, dass sich die Materialeigenschaften in Abhängigkeit der Elektronenbestrahlung präzise einstellen lassen und dass diese Gele eine hohe Zellkompatibilität aufweisen. Das zweite Teilprojekt beschreibt den Effekt des thermischen Formgedächtnisses in Gelatine nach Elektronenstrahlvernetzung und dessen Potential für die Entwicklung biologischer Aktuatoren. Die Effizienz des Formgedächtniseffekts wird in diesem Teilprojekt ausführlich theoretisch beschrieben und mit experimentellen Untersuchungen an Gelatine verglichen. Im dritten Teilprojekt wird ein elektronenstrahlvernetztes, hydrations-responsives Gelatinesystem beschrieben. Zusätzlich wird der Einfluss von pH-Wert und Salzkonzentration der Quelllösung auf das Quellen von elektronenstrahlvernetzter Gelatine untersucht um das Reaktionsverhalten noch präziser einstellen zu können. Das vierte Teilprojekt beschreibt einen Zwei-Schritt-Prozess, bei dem dünne Gelatineschichten mittels hochenergetischer Elektronen mechanisch funktionalisiert werden können. Dabei wird in einem ersten Schritt die Oberfläche durch hoch fokussierte Elektronen mechanisch strukturiert, um im zweiten Schritt mittels homogener Elektronenstrahlvernetzung für die Anwendung unter physiologischen Bedingungen stabilisiert zu werden. Eine weitere Methode zur Funktionalisierung der Oberfläche von Gelatinehydrogelen wird im letzten Teilprojekt dieser Arbeit dokumentiert. Dabei werden topographische Mikrostrukturen auf Gelatineoberflächen aufgebracht und mittels Elektronenstrahlvernetzung stabilisiert. Dieses Teilprojekt untersucht zusätzlich den Strukturtransfer, die Langzeitstabilität unter physiologischen Bedingungen sowie die Zellkompatibilität.:1 Introduction and Objective 1.1 Biomimetic ECM Models 1.2 Stimuli-Responsive Hydrogels 1.3 Functional Hydrogel Surfaces 2 General Background 2.1 Hydrogels 2.1.1 Collagen 2.1.2 Gelatin 2.2 Polymer Crosslinking 2.2.1 High-Energy Electron-Treatment of Polymers 2.2.2 Electron-Irradiation-Induced Crosslinking of Gelatin 2.3 High-Energy Electron Accelerator 3 Cumulative Part 3.1 High-Energy Electron-Induced Modification of Collagen 3.2 Thermo-Responsive Gelatin System 3.3 Hydration-Responsive Gelatin System 3.4 Mechanically Patterned Gelatin Surfaces 3.5 Topographically Patterned Gelatin Surfaces 4 Summary and Conclusion 5 Outlook Bibliography Author Contributions List of Abbreviations List of Figures Acknowledgements Scientific Curriculum Vitae Publication List Selbstständigkeitserklärung

Gene therapy is a potential strategy for treatment of diseases caused by a gene defect. Recent studies are involved particulary in the cure of diseases caused by single gene defect (cystic fibrosis, haemophilia, muscular dystrophy etc.). Our work is part of a project aiming at developing ex vivo non-viral gene delivery systems that could be used for the treatment of ocular and cardiovascular diseases. The gene vectors are biodegradable polymeric carriers based on poly-α-amino acids. These polyplexes should transfect target cells which are supposed to be seeded on polyimide membranes. The biodegradable polymer membrane will be implanted into the retina or used as a coating for cardiovascular prosthesis. As a cover of the implantable membranes we used polymerized methacrylamide-modified gelatin forming hydrogels and mediating a growth support for transfected cells. We focus on material bio- and immunocompatibility/immunoacceptability. The results indicated a very good bio- and immunocompatibility of the gelatin B hydrogel both in vitro and in vivo. The gelatin B hydrogel did not cause erythrocytes lysis, stimulation of proliferation (spontaneous or mitogen-induced) of mouse or human lymphoid cells, neither production of cytokines or NO in vitro. Histological examination following subcutaneous...

Inledning: Sjuka barn behöver anpassad vård och säkra, effektiva och väldokumenterade läkemedel. Förskrivning och uttag av preparat för pediatriska populationen ökar, men en tydlig uppskattning på problematik finns inte. Problem kan uppstå, när en lämplig beredning saknas, när redan registrerade läkemedel saknar avdelade doser för barn eller är tillgängliga enbart som en tablett med vuxen dos. Varje barn sägs vara en individ med unika läkemedelsomsättning, metabolism och biverkningspanorama, vilket komplicerar behandling. Lösningen på detta är i många fall ett extemporeläkemedel eller ett licenspreparat, men långa ledtider och dålig tillgänglighet kan medföra svårigheter att kunna ge rätt terapi. Syftet med denna studie är att i) kartlägga behov och befintliga lösningar, ii) testa handhållna pulverdispenser (HPD) Quantos, som en lämplig metod för fasta beredningar för att tillhandahålla individuella läkemedelsdoser till barn i de fall godkända läkemedel inte räcker.  Metod: Databassökning, intervjuer av hälso-sjukvårdspersonal, samt laborativt arbete för att omformulera registrerade läkemedel i tablettformer till individanpassade doser i hårdgelatin-kapslar med hjälp av Mettler-Toledos handhållna pulverdoseringsinstrument HPD Quantos. Resultat: Litteraturstudien och intervjuer överensstämmer med varandra: behov av barnanpassade läkemedel finns. HPD Quantos kan vara en alternativ metod för fasta beredningar för att tillhandahålla mängderför uppdosering med en femte- och/ eller en sjättedel av en tablett. Slutsats: För att ombesörja behoven för barnanpassade doser på ett sjukhus, måste HPD Quantos automatiseras till en inbyggd doseringsstation. Detta kommer att säkerställa dosering, dölja obehaglig smak, samt minska arbetsmiljörisken vid exponering av toxiska läkemedel.

No description available.

Toward the next generation of nerve guidance conduits (NGCs), novel biomaterials and functionalization concepts are required to address clinical demands in peripheral nerve regeneration (PNR). As a biological polymer with bioactive motifs, gelatinous peptides are promising building blocks. In combination with an anhydride-containing oligomer, a dual-component hydrogel system (cGEL) was established. First, hollow cGEL tubes were fabricated by a continuous dosing and templating process. Conduits were characterized concerning their mechanical strength, in vitro and in vivo degradation and biocompatibility. Second, cGEL was reformulated as injectable shear thinning filler for established NGCs, here tyrosine-derived polycarbonate-based braided conduits. Thereby, the formulation contained the small molecule LM11A-31. The biofunctionalized cGEL filler was assessed regarding building block integration, mechanical properties, in vitro cytotoxicity, and growth permissive effects on human adipose tissue-derived stem cells. A positive in vitro evaluation motivated further application of the filler material in a sciatic nerve defect. Compared to the empty conduit and pristine cGEL, the functionalization performed superior, though the autologous nerve graft remains the gold standard. In conclusion, LM11A-31 functionalized cGEL filler with extracellular matrix (ECM)-like characteristics and specific biochemical cues holds great potential to support PNR.

Les maladies cardiovasculaires sont une des causes de mortalités les plus élevées mondialement. Parmi celles-ci, on retrouve l’infarctus du myocarde, qui n’a pour traitement que la transplantation cardiaque. Or, dû à la faible quantité de donneur, une solution alternative est recherchée. De ce fait, l’ingénierie tissulaire permet le développement de tissus et d’implants thérapeutiques tels les patchs cardiaques, qui peuvent être bioimprimés. Or, une des limitations actuelles de l’utilisation d’une telle stratégie est la vascularisation de tissu bioimprimés. Dans cette étude, la bioimpression 3D a été utilisée afin de bioimprimer des patchs perfusables de gélatine méthacrylate (GelMA) à utiliser potentiellement pour le tissu cardiaque. Il a été possible de développer une bioencre pouvant être utilisée pour une application dans le tissu cardiaque, d’évaluer l’imprimabilité de l’encre et de bioimprimer de patchs standards et perfusables. Pour ce faire, GelMA a été synthétisé et les propriétés mécaniques ont été évaluées pour finalement sélectionner une encre de 10 % GelMA, ayant un module de Young approprié pour le tissu cardiaque, de 23,7±5,1 kPa. Par la suite, les processus d’impression, standard et coaxial, de patchs standards et perfusables ont pu être optimisés. Finalement, des patchs perfusables de GelMA 10% et gélatine 2% ont pu être imprimés avec une viabilité cellulaire élevée, jusqu’à 79,7±8,7 % et 83,5±5,7 % obtenue aux jours 1 et 7 de culture respectivement, avec des fibroblastes 3T3. La présence de canaux vides et la perfusabilité des patchs démontrent le potentiel de cette méthode pour éventuellement bioimprimer des patchs cardiaques vascularisés épais. / Cardiovascular diseases are a leading cause of death worldwide. Myocardial infarction captures a significant segment of this population, and the end-stage myocardial infarction can only be treated by heart transplantation. However, due to the scarcity donors, tissue engineering has been considered as an alternative solution. Tissue engineering allows the development of tissues and therapeutic implants such as cardiac patches. However, one of the main hurdles in the use of such a strategy is the vascularization of bioprinted tissue. In this study, 3D bioprinting was used to bioprint perfusable gelatin methacrylate (GelMA) patches for a potential use in cardiac tissue. This work consists in the development of a bioink that can be used for the cardiac tissue, the evaluation of the printability of the ink, and the final bioprinting of standard and perfusable patches. For this purpose, GelMA was synthesized and a final concentration of 10 % was selected as it showed an appropriate Young's modulus for cardiac tissue, of 23.7±5.1 kPa, while maintaining high biocompatibility. Subsequently, the printing process of standard and perfusable patches could be optimized with the use of GelMA and gelatin inks. Finally, 10% GelMA and 2% gelatin vascularized patches could be printed with high cell viability, of up to 79,7±8,7 % and 83,5±5,7 % on days 1 and 7 of culture respectively for 3T3 fibroblasts. Additionally, the presence of hollow channels of the perfusable patches demonstrates the potential of this method to be eventually applied to the bioprinting of thick vascularized cardiac patches.

Three-dimensional printing technologies exhibit tremendous potential in the advancing fields of tissue engineering and regenerative medicine due to the precise spatial control over depositing the biomaterial. Despite their widespread utilization and numerous advantages, the development of suitable novel biomaterials for extrusion-based 3D printing of scaffolds that support cell attachment, proliferation, and vascularization remains a challenge. Multi-material composite hydrogels present incredible potential in this field. Thus, in this work, a multi-material composite hydrogel with a promising formulation of chitosan/gelatin functionalized with egg white was developed, which provides good printability and shape fidelity. In addition, a series of comparative analyses of different crosslinking agents and processes based on tripolyphosphate (TPP), genipin (GP), and glutaraldehyde (GTA) were investigated and compared to select the ideal crosslinking strategy to enhance the physicochemical and biological properties of the fabricated scaffolds. All of the results indicate that the composite hydrogel and the resulting scaffolds utilizing TPP crosslinking have great potential in tissue engineering, especially for supporting neo-vessel growth into the scaffold and promoting angiogenesis within engineered tissues.

Yes / Infection is the major reason for guided tissue regeneration/guided bone regeneration (GTR/GBR) membrane failure in clinical application. In this work, we developed GTR/GBR membranes with localized drug delivery function to prevent infection by electrospinning of poly(ε-caprolactone) (PCL) and gelatin blended with metronidazole (MNA). Acetic acid (HAc) was introduced to improve the miscibility of PCL and gelatin to fabricate homogeneous hybrid nanofiber membranes. The effects of the addition of HAc and the MNA content (0, 1, 5, 10, 20, 30, and 40 wt.% of polymer) on the properties of the membranes were investigated. The membranes showed good mechanical properties, appropriate biodegradation rate and barrier function. The controlled and sustained release of MNA from the membranes significantly prevented the colonization of anaerobic bacteria. Cells could adhere to and proliferate on the membranes without cytotoxicity until the MNA content reached 30%. Subcutaneous implantation in rabbits for 8 months demonstrated that MNA-loaded membranes evoked a less severe inflammatory response depending on the dose of MNA than bare membranes. The biodegradation time of the membranes was appropriate for tissue regeneration. These results indicated the potential for using MNA-loaded PCL/gelatin electrospun membranes as anti-infective GTR/GBR membranes to optimize clinical application of GTR/GBR strategies.