No description available.

Submitted by Marlucy Farias Medeiros (marlucy.farias@unipampa.edu.br) on 2018-05-11T18:52:52Z No. of bitstreams: 1 Daniel_Lemes - 2018.pdf: 18189235 bytes, checksum: 1ee5df4451f15272b5fcd3e07ef614e8 (MD5) / Approved for entry into archive by Dayse Pestana (dayse.pestana@unipampa.edu.br) on 2018-05-14T12:00:34Z (GMT) No. of bitstreams: 1 Daniel_Lemes - 2018.pdf: 18189235 bytes, checksum: 1ee5df4451f15272b5fcd3e07ef614e8 (MD5) / Made available in DSpace on 2018-05-14T12:00:34Z (GMT). No. of bitstreams: 1 Daniel_Lemes - 2018.pdf: 18189235 bytes, checksum: 1ee5df4451f15272b5fcd3e07ef614e8 (MD5) Previous issue date: 2018-04-05 / The main goal of this work was to develop a MATLAB-based co de capable of finding the optimum values for amplitudes, phases and spacings of a non-uniformly spaced linear antenna array for a specified purpose. This tool allowed investigating the influence of the relative spacings between the elements of an antenna array in its radiation pattern. Two optimization methods were implemented: PSO (Particle swarm optimization), which is an evolutionary heuristic based on the social interaction and movement of swarms, and Taguchi’s method, which is based on orthogonal arrays to reduce the number of experiments needed to find the optimum value of a given variable. Different optimization goals were investigated, so that a comparison between these techniques has been done. The developed co de was applied to solve two practical problems. In the first one, a dual-band antenna array for base stations of mobile communication systems was modeled and its amplitudes, phases and spacings were optimized. By doing so, it was possible to mitigate the granting lobes that app eared in the pattern in the higher band, because the relative spacings between the elements could not be smaller than λ0. The pattern of this array was also shaped following a squared cosecant contour, in order to illuminate a pico-cell with uniform power. The results of the optimizations in both bands were validated using the commercial software Ansys HFSS and a study about the influence of the mutual coupling in the pattern was done. The second practical problem was to design an antenna array with beamshaping. By using the proposed code, it was possible to reduce the number of array elements from seven to four comparing to an uniformly spaced array. The optimization was split into two parts in order to mitigate the influence of the mutual coupling. A passive feeder for the optimized array was designed and a prototype was manufactured. The results were validated using HFSS and by measurements. The complete development of the array and of the feeder are detailed in this work. Finally, the design of a transmitter for adaptive beamshaping is described. The architecture nis capable to change the phase and power level of the signal, hence allowing to deliver the weights optimized by the proposed code to the antenna array. A modular concept was chosen in order to increase the flexibility of the transmitter. The device translates the input frequency from 500 MHz to 7 GHz, in order to deliver the weights to the antenna array. Eight transmitters were assembled and they were coupled to the antenna array in order to test their functionality. The patterns were measured in an anechoic chamber. All measured results of the transmitter are presented. / O principal objetivo deste trabalho foi desenvolver uma ferramenta computacional em MATLAB capaz de otimizar as fases, as amplitudes e os espaçamentos de uma rede de antenas, a fim de satisfazer um determinado objetivo. De posse dessa ferramenta, foi possível analisar a influência do espaçamento relativo entre os elementos de uma rede no diagrama da mesma. Dois métodos de otimização foram implementados: PSO (Particle Swarm Opmitization), baseado na interação social e no movimento de um enxame, e o método de Taguchi, que utiliza matrizes ortogonais para diminuir o número de testes necessários para otimizar uma variável. Diferentes cenários foram analisados de forma a permitir uma comparação entre os dois métodos. O código desenvolvido foi aplicado a dois problemas práticos. No primeiro deles, uma rede de antenas dupla-faixa para emprego em estações rádio base de sistemas de comunicações móveis foi modelada e suas amplitudes, fases e espaçamentos foram otimizados. Como na banda mais alta o espaçamento entre os elementos não podia ser menor que λ0., fez-se necessário otimizar os espaçamentos para controle dos grating lobes. O diagrama dessa rede foi também conformado seguindo um contorno em cossecante ao quadrado, para iluminar uma certa região com potência uniforme. Os resultados de todas as otimizações em ambas bandas foram validados usando o software Ansys HFSS e um estudo sobre a influência do acoplamento mútuo foi feito. O segundo caso consistiu na otimização de uma rede de antenas com conformação de feixe. Foi possível diminuir o número de elementos de sete para quatro em comparação a uma rede com elementos uniformemente espaçados. A otimização foi dividida em duas partes para compensar o efeito do acoplamento mútuo. Para a rede otimizada, um sistema alimentador passivo foi desenvolvido e um protótipo foi fabricado. Os resultados foram validados com simulações no software comercial Ansys HFSS e, também, por medições. Todo o projeto da rede e do alimentador é detalhado neste trabalho. Finalmente, o desenvolvimento de um circuito transmissor para beamshaping adaptativo ´e detalhado. Tal sistema é composto por um defasador e um amplificador de ganho variável, com os quais é possível inserir as amplitudes e fases, otimizadas pelo código proposto, em uma rede de antenas. Desenvolveu-se um transmissor modular, a fim de aumentar a flexibilidade do sistema. A frequência de entrada do transmissor é de 500 MHz, que é transladada para 7 GHz antes de ser entregue à rede de antenas. Foram fabricados oito transmissores, os quais foram acoplados a uma rede de antenas para testar suas funcionalidades. Os diagramas de irradiação foram medidos em câmera anecóica. Todo o desenvolvimento e medições de cada componente do transmissor são também mostrados neste trabalho.

L’imagerie échographique en trois dimensions (3D) est une modalité d’imagerie médicale en plein développement. En plus de ses nombreux avantages (faible cout, absence de rayonnement ionisant, portabilité) elle permet de représenter les structures anatomiques dansleur forme réelle qui est toujours 3D. Les sondes à balayage mécaniques, relativement lentes, tendent à être remplacées par des sondes bidimensionnelles ou matricielles qui sont unprolongement dans les deux directions, latérale et azimutale, de la sonde classique 1D. Cetagencement 2D permet un dépointage du faisceau ultrasonore et donc un balayage 3D del’espace. Habituellement, les éléments piézoélectriques d’une sonde 2D sont alignés sur unegrille et régulièrement espacés d’une distance (en anglais le « pitch ») soumise à la loi del’échantillonnage spatial (distance inter-élément inférieure à la demi-longueur d’onde) pour limiter l’impact des lobes de réseau. Cette contrainte physique conduit à une multitude d’éléments de petite taille. L’équivalent en 2D d’une sonde 1D de 128 éléments contient128x128=16 384 éléments. La connexion d’un nombre d’éléments aussi élevé constitue unvéritable défi technique puisque le nombre de canaux dans un échographe actuel n’excède querarement les 256. Les solutions proposées pour contrôler ce type de sonde mettent en oeuvredu multiplexage ou des techniques de réduction du nombre d’éléments, généralement baséessur une sélection aléatoire de ces éléments (« sparse array »). Ces méthodes souffrent dufaible rapport signal à bruit du à la perte d’énergie qui leur est inhérente. Pour limiter cespertes de performances, l’optimisation reste la solution la plus adaptée. La première contribution de cette thèse est une extension du « sparse array » combinéeavec une méthode d’optimisation basée sur l’algorithme de recuit simulé. Cette optimisation permet de réduire le nombre nécessaire d’éléments à connecter en fonction des caractéristiques attendues du faisceau ultrasonore et de limiter la perte d’énergie comparée à la sonde complète de base. La deuxième contribution est une approche complètement nouvelle consistant à adopter un positionnement hors grille des éléments de la sonde matricielle permettant de supprimer les lobes de réseau et de s’affranchir de la condition d’échantillonnage spatial. Cette nouvelles tratégie permet d’utiliser des éléments de taille plus grande conduisant ainsi à un nombre d’éléments nécessaires beaucoup plus faible pour une même surface de sonde. La surface active de la sonde est maximisée, ce qui se traduit par une énergie plus importante et donc unemeilleure sensibilité. Elle permet également de balayer un angle de vue plus important, leslobes de réseau étant très faibles par rapport au lobe principal. Le choix aléatoire de la position des éléments et de leur apodization (ou pondération) reste optimisé par le recuit simulé.Les méthodes proposées sont systématiquement comparées avec la sonde complète dansle cadre de simulations numériques dans des conditions réalistes. Ces simulations démontrent un réel potentiel pour l’imagerie 3D des techniques développées. Une sonde 2D de 8x24=192 éléments a été construite par Vermon (Vermon SA, ToursFrance) pour tester les méthodes de sélection des éléments développées dans un cadreexpérimental. La comparaison entre les simulations et les résultats expérimentaux permettentde valider les méthodes proposées et de prouver leur faisabilité. / 3D Ultrasound imaging is a fast-growing medical imaging modality. In addition to its numerous advantages (low cost, non-ionizing beam, portability) it allows to represent the anatomical structures in their natural form that is always three-dimensional. The relativelyslow mechanical scanning probes tend to be replaced by two-dimensional matrix arrays that are an extension in both lateral and elevation directions of the conventional 1D probe. This2D positioning of the elements allows the ultrasonic beam steering in the whole space. Usually, the piezoelectric elements of a 2D array probe are aligned on a regular grid and spaced out of a distance (the pitch) subject to the space sampling law (inter-element distancemust be shorter than a mid-wavelength) to limit the impact of grating lobes. This physical constraint leads to a multitude of small elements. The equivalent in 2D of a 1D probe of 128elements contains 128x128 = 16,384 elements. Connecting such a high number of elements is a real technical challenge as the number of channels in current ultrasound scanners rarely exceeds 256. The proposed solutions to control this type of probe implement multiplexing or elements number reduction techniques, generally using random selection approaches (« spars earray »). These methods suffer from low signal to noise ratio due to the energy loss linked to the small number of active elements. In order to limit the loss of performance, optimization remains the best solution. The first contribution of this thesis is an extension of the « sparse array » technique combined with an optimization method based on the simulated annealing algorithm. The proposed optimization reduces the required active element number according to the expected characteristics of the ultrasound beam and permits limiting the energy loss compared to the initial dense array probe.The second contribution is a completely new approach adopting a non-grid positioningof the elements to remove the grating lobes and to overstep the spatial sampling constraint. This new strategy allows the use of larger elements leading to a small number of necessaryelements for the same probe surface. The active surface of the array is maximized, whichresults in a greater output energy and thus a higher sensitivity. It also allows a greater scansector as the grating lobes are very small relative to the main lobe. The random choice of the position of the elements and their apodization (or weighting coefficient) is optimized by the simulated annealing.The proposed methods are systematically compared to the dense array by performing simulations under realistic conditions. These simulations show a real potential of the developed techniques for 3D imaging.A 2D probe of 8x24 = 192 elements was manufactured by Vermon (Vermon SA, Tours,France) to test the proposed methods in an experimental setting. The comparison between simulation and experimental results validate the proposed methods and prove their feasibility. / L'ecografia 3D è una modalità di imaging medicale in rapida crescita. Oltre ai vantaggiin termini di prezzo basso, fascio non ionizzante, portabilità, essa permette di rappresentare le strutture anatomiche nella loro forma naturale, che è sempre tridimensionale. Le sonde ascansione meccanica, relativamente lente, tendono ad essere sostituite da quelle bidimensionali che sono una estensione in entrambe le direzioni laterale ed azimutale dellasonda convenzionale 1D. Questo posizionamento 2D degli elementi permette l'orientamentodel fascio ultrasonico in tutto lo spazio. Solitamente, gli elementi piezoelettrici di una sondamatriciale 2D sono allineati su una griglia regolare e separati da una distanza (detta “pitch”) sottoposta alla legge del campionamento spaziale (la distanza inter-elemento deve esseremeno della metà della lunghezza d'onda) per limitare l'impatto dei lobi di rete. Questo vincolo fisico porta ad una moltitudine di piccoli elementi. L'equivalente di una sonda 1D di128 elementi contiene 128x128 = 16.384 elementi in 2D. Il collegamento di un così grandenumero di elementi è una vera sfida tecnica, considerando che il numero di canali negliecografi attuali supera raramente 256. Le soluzioni proposte per controllare questo tipo disonda implementano le tecniche di multiplazione o la riduzione del numero di elementi, utilizzando un metodo di selezione casuale (« sparse array »). Questi metodi soffrono di unbasso rapporto segnale-rumore dovuto alla perdita di energia. Per limitare la perdita di prestazioni, l’ottimizzazione rimane la soluzione migliore. Il primo contributo di questa tesi è un’estensione del metodo dello « sparse array » combinato con un metodo di ottimizzazione basato sull'algoritmo del simulated annealing. Questa ottimizzazione riduce il numero degli elementi attivi richiesto secondo le caratteristiche attese del fascio di ultrasuoni e permette di limitare la perdita di energia.Il secondo contributo è un approccio completamente nuovo, che propone di adottare un posizionamento fuori-griglia degli elementi per rimuovere i lobi secondari e per scavalcare il vincolo del campionamento spaziale. Questa nuova strategia permette l'uso di elementi piùgrandi, riducendo così il numero di elementi necessari per la stessa superficie della sonda. La superficie attiva della sonda è massimizzata, questo si traduce in una maggiore energia equindi una maggiore sensibilità. Questo permette inoltre la scansione di un più grande settore,in quanto i lobi secondari sono molto piccoli rispetto al lobo principale. La scelta casualedella posizione degli elementi e la loro apodizzazione viene ottimizzata dal simulate dannealing. I metodi proposti sono stati sistematicamente confrontati con la sonda completaeseguendo simulazioni in condizioni realistiche. Le simulazioni mostrano un reale potenzialedelle tecniche sviluppate per l'imaging 3D.Una sonda 2D di 8x24 = 192 elementi è stata fabbricata da Vermon (Vermon SA, ToursFrance) per testare i metodi proposti in un ambiente sperimentale. Il confronto tra lesimulazioni e i risultati sperimentali ha permesso di convalidare i metodi proposti edimostrare la loro fattibilità.

Soliton states in three coupled optical waveguide systems were studied: two linearly coupled waveguides with quadratic nonlinearity, two linearly coupled waveguides with cubic nonlinearity and Bragg gratings, and a quadratic nonlinear waveguide with resonant gratings, which enable three-wave interaction. The methods adopted to tackle the problems were both analytical and numerical. The analytical method mainly made use of the variational approximation. Since no exact analytical method is available to find solutions for the waveguide systems under study, the variational approach was proved to be very useful to find accurate approximations. Numerically, the shooting method and the relaxation method were used. The numerical results verified the results obtained analytically. New asymmetric soliton states were discovered for the coupled quadratically nonlinear waveguides, and for the coupled waveguides with both cubic nonlinearity and Bragg gratings. Stability of the soliton states was studied numerically, using the Beam Propagation Method. Asymmetric couplers with quadratic nonlinearity were also studied. The bifurcation diagrams for the asymmetric couplers were those unfolded from the corresponding diagrams of the symmetric couplers. Novel stable two-soliton bound states due to three-wave interaction were discovered for a quadratically nonlinear waveguide equipped with resonant gratings. Since the coupled optical waveguide systems are controlled by a larger number of parameters than in the corresponding single waveguide, the coupled systems can find a much broader field of applications. This study provides useful background information to support these applications.

Over the past decade vehicle judder caused by Disc Thickness Variation (DTV) has become of major concern to automobile manufacturers worldwide. Judder is usually perceived by the driver as minor to severe vibrations transferred through the chassis during braking [1-9]. In this research, DTV is investigated via the use of a Smart Brake Pad (SBP). The SBP is a tool that will enable engineers to better understand the processes which occur in the harsh and confined environment that exists between the brake pad and disc whilst braking. It is also a tool that will enable engineers to better understand the causes of DTV and stick-slip the initiators of low and high frequency vibration in motor vehicle brakes. Furthermore, the technology can equally be used to solve many other still remaining mysteries in automotive, aerospace, rail or anywhere where two surfaces may come in contact. The SBP consists of sensors embedded into an automotive brake pad enabling it to measure pressure between the brake pad and disc whilst braking. The two sensor technologies investigated were Thick Film (TF) and Fibre Optic (FO) technologies. Each type was tested individually using a Material Testing System (MTS) at room and elevated temperatures. The chosen SBP was then successfully tested in simulated driving conditions. A preliminary mathematical model was developed and tested for the TF sensor and a novel Finite Element Analysis (FEA) model for the FO sensor. A new method called the Total Expected Error (TEE) method was also developed to simplify the sensor specification process to ensure consistent comparisons are made between sensors. Most importantly, our achievement will lead to improved comfort levels for the motorist.

Semiconductor nanostructures exhibit many remarkable electronic and optical properties. The key to designing and utilising semiconductor quantum structures is a physical understanding of the detailed excitation, transport and energy relaxation processes. Thus the nonequilibrium dynamics of semiconductor quantum structures have attracted extensive attention in recent years. Ultrafast spectroscopy has proven to be a versatile and powerful tool for investigating transient phenomena related to the relaxation and transport dynamics in semiconductors. In this thesis, we report investigations into the electronic and optical properties of various semiconductor quantum systems using a variety of ultrafast techniques, including up-conversion photoluminescence, pump-probe, photon echoes and four-wave mixing. The semiconductor quantum systems studied include ZnO/ZnMgO multiple quantum wells with oxygen ion implantation, InGaAs/GaAs self-assembled quantum dots with different doping, InGaAs/InP quantum wells with proton implantation, and silicon quantum dots. The spectra of these semiconductor nanostructures range from the ultraviolet region, through the visible, to the infrared. In the UV region we investigate excitons, biexcitons and oxygen implantation effects in ZnO/ZnMgO multi-quantum wells using four-wave mixing, pump-probe and photoluminescence techniques. Using time-resolved up-conversion photoluminescence, we investigate the relaxation dynamics and state filling effect in InGaAs self-assembled quantum dots with different doping, and the implantation effect in InGaAs/InP quantum wells. Finally, we study the optical properties of silicon quantum dots using time-resolved photoluminescence and photon echo spectroscopy on various time scales, ranging from microseconds to femtoseconds.

Size reduction is a key issue in the development of contemporary integrated photonics. This thesis is mainly devoted to study some integrated photonic components in sub-wavelength or nanometric scales, both theoretically and experimentally. The possible approaches to reduce the sizes or to increase the functionalities of photonic components are discussed, including waveguides and devices based on silicon nanowires, photonic crystals, surface plasmons, and some near-field plasmonic components. First, some numerical methods, including the finite-difference time-domain method and the full-vectorial finite-difference mode solver, are introduced. The finite-difference time-domain method can be used to investigate the interaction of light fields with virtually arbitrary structures. The full-vectorial finite-difference mode solver is mainly used for calculating the eigenmodes of a waveguide structure. The fabrication and characterization technologies for nano-photonic components are reviewed. The fabrications are mainly based on semiconductor cleanroom facilities, which include thin film deposition, electron beam lithography, and etching. The characterization setups with the end-fire coupling and the vertical grating coupling are also described. Silicon nanowire waveguides and related devices are studied. Arrayed waveguide gratings with 11nm and 1.6nm channel spacing are fabricated and characterized. The dimension of these arrayed waveguide gratings is around 100 μm, which is 1--2 order of magnitude smaller than conventional silica based arrayed waveguide gratings. A compact polarization beam splitter employing positive/negative refraction based on a photonic crystal of silicon pillars is designed and demonstrated. Extinction ratio of ~15dB is achieved experimentally in a wide wavelength range. Surface plasmon waveguides and devices are analyzed theoretically. With surface plasmons the light field can be confined in a sub-wavelength dimension. Some related photonic devices, e.g., directional couplers and ring resonators, are studied. We also show that some ideas and principles of microwave devices, e.g., a branch-line coupler, can be borrowed for building corresponding surface plasmon based devices. Near-field plasmonic components, including near-field scanning optical microscope probes and left handed material slab lenses, are also analyzed. Some novel designs are introduced to enhance the corresponding systems. / QC 20100908

This thesis treats the development of packaging and integration methods for the cost-efficient encapsulation and packaging of microelectromechanical (MEMS) devices. The packaging of MEMS devices is often more costly than the device itself, partly because the packaging can be crucial for the performance of the device. For devices which contain liquids or needs to be enclosed in a vacuum, the packaging can account for up to 80% of the total cost of the device. The first part of this thesis presents the integration scheme for an optical dye thin film NO2-gas sensor, designed using cost-efficient implementations of wafer-scale methods. This work includes design and fabrication of photonic subcomponents in addition to the main effort of integration and packaging of the dye-film. A specific proof of concept target was for NO2 monitoring in a car tunnel. The second part of this thesis deals with the wafer-scale packaging methods developed for the sensing device. The developed packaging method, based on low-temperature plastic deformation of gold sealing structures, is further demonstrated as a generic method for other hermetic liquid and vacuum packaging applications. In the developed packaging methods, the mechanically squeezed gold sealing material is both electroplated microstruc- tures and wire bonded stud bumps. The electroplated rings act like a more hermetic version of rubber sealing rings while compressed in conjunction with a cavity forming wafer bonding process. The stud bump sealing processes is on the other hand applied on completed cavities with narrow access ports, to seal either a vacuum or liquid inside the cavities at room temperature. Additionally, the resulting hermeticity of primarily the vacuum sealing methods is thoroughly investigated. Two of the sealing methods presented require permanent mechanical fixation in order to complete the packaging process. Two solutions to this problem are presented in this thesis. First, a more traditional wafer bonding method using tin-soldering is demonstrated. Second, a novel full-wafer epoxy underfill-process using a microfluidic distribution network is demonstrated using a room temperature process. / <p>QC 20130325</p>

This thesis presents an exploration of the photophysics of colloidal semiconductor nanocrystals using both linear and non-linear optical measurement techniques. These optical methodologies are used to follow population dynamics in both singly and multiply excited nanocrystal systems as well as determine material properties of the ensemble. Topics covered in the thesis include, the identification and characterization of bulk-like nanocrystals, study of the fine structure states of the lowest energy exciton, single and multiexciton population dynamics, acoustic phonon modes, elasticity and surface stress properties of a colloidal ensemble in solution.Through linear spectroscopy, the properties of both quantum confined and bulk-like colloidal semiconductor nanocrystals are compared. The identification of a model system of bulk-like nanocrystals with a non-standard absorption profile serves to resolve an ambiguity in literature concerning their characterization. The remainder of the thesis is focused on the size-dependent properties of quantum confined CdSe colloidal nanocrystals. The population dynamics and material properties of these systems are studied using a nonlinear optical technique called transient grating. A third order transient grating measurement with a cross-polarized configuration, which follows the relaxation within the fine structure levels of the lowest energy exciton state, is demonstrated and used to compare systems with different crystal field splittings. Transient grating experiments performed with specific polarization sequences allow for selective observation of the dynamics amongst nearly degenerate levels at room temperature. Cross-polarized transient grating is also used to observe a quantized acoustic phonon mode in a series of nanocrystal samples. The observation of this mode allows experimental determination of the elasticity and surface stress of the nanocrystal ensemble in solution. The anisotropic origin of the acoustic phonon is discussed using a combination of theoretical analysis, modelling and experimental data. In addition, third- and fifth-order transient grating experiments are used to study exciton and multiexciton population relaxation dynamics. The work presented here spans the optical and material properties of quantum confined and `bulk' nanocrystals. This thesis attempts to illustrate the broad scope of the observed behaviour of colloidal nanocrystal systems and to contribute to a greater understanding of their physical properties.

This thesis presents an exploration of the photophysics of colloidal semiconductor nanocrystals using both linear and non-linear optical measurement techniques. These optical methodologies are used to follow population dynamics in both singly and multiply excited nanocrystal systems as well as determine material properties of the ensemble. Topics covered in the thesis include, the identification and characterization of bulk-like nanocrystals, study of the fine structure states of the lowest energy exciton, single and multiexciton population dynamics, acoustic phonon modes, elasticity and surface stress properties of a colloidal ensemble in solution.Through linear spectroscopy, the properties of both quantum confined and bulk-like colloidal semiconductor nanocrystals are compared. The identification of a model system of bulk-like nanocrystals with a non-standard absorption profile serves to resolve an ambiguity in literature concerning their characterization. The remainder of the thesis is focused on the size-dependent properties of quantum confined CdSe colloidal nanocrystals. The population dynamics and material properties of these systems are studied using a nonlinear optical technique called transient grating. A third order transient grating measurement with a cross-polarized configuration, which follows the relaxation within the fine structure levels of the lowest energy exciton state, is demonstrated and used to compare systems with different crystal field splittings. Transient grating experiments performed with specific polarization sequences allow for selective observation of the dynamics amongst nearly degenerate levels at room temperature. Cross-polarized transient grating is also used to observe a quantized acoustic phonon mode in a series of nanocrystal samples. The observation of this mode allows experimental determination of the elasticity and surface stress of the nanocrystal ensemble in solution. The anisotropic origin of the acoustic phonon is discussed using a combination of theoretical analysis, modelling and experimental data. In addition, third- and fifth-order transient grating experiments are used to study exciton and multiexciton population relaxation dynamics. The work presented here spans the optical and material properties of quantum confined and `bulk' nanocrystals. This thesis attempts to illustrate the broad scope of the observed behaviour of colloidal nanocrystal systems and to contribute to a greater understanding of their physical properties.