Eine Voraussetzung um einen Flugregler für Flugroboter zu realisieren, ist die Wahrnehmung der Bewegungen dieses Roboters. Diese Arbeit beschreibt einen Ansatz zur Schätzung der Bewegung eines autonomen Flugroboters unter Verwendung relativ einfacher, leichter und kostengünstiger Sensoren. Mittels eines Erweiterten Kalman Filters werden Beschleunigungssensoren, Gyroskope, ein Ultraschallsensor, sowie ein Sensor zu Messung des optischen Flusses zu einer robusten Bewegungsschätzung kombiniert. Dabei wurden die einzelnen Sensoren hinsichtlich der Eigenschaften experimentell untersucht, welche für die anschließende Erstellung des Filters relevant sind. Am Ende werden die Resultate des Filters mit den Ergebnissen einer Simulation und eines externen Tracking-Systems verglichen.

Syftet med att mäta vibrationer och rekyler i ett padelrack i detta arbete är att utveckla en prototyp som kan användas som träningsredskap för att minska risken för skador. En vanlig skada som drabbar padelspelare är tennisarmbåge, som enligt studier tros uppkomma genom upprepad exponering av mikrotrauman som vibrationer och rekyler. Genom att utföra en litteraturstudie i ämnet har systemkrav för ett sensorbaserat system definierats. Systemet som mäter vibrationer och rekyler har monterats i handtaget på padelracket. Två olika testmiljöer har utvecklats för att möjliggöra kontrollerade tester. För att identifiera och analysera slag använder systemet frekvensanalyser, korrelationstester och positionsförändring. Vid utveckling av metoden för identifiering av träffpunkt delades racket upp i fem olika zoner. Resultatet indikerar att träffar i två av zonerna ger upphov till mindre mängd vibrationer jämfört med de övriga zonerna. Resultatet för identifiering av träffzon varierar mellan testmiljöerna och enbart identifiering av en zon kan anses vara fungerande i båda fallen. Systemet identifierade träffzonen korrekt i 18 av 25 slag i den ena testmiljön och 9 av 25 i den andra. För att förbättra identifieringen av träffzon behövs flera analyser och korrelationtester utformas. En slutsats för det här examensarbetet är att det här arbetet kan användas som grund för vidare utveckling av ett sensorbaserat system för att identifiera träffzonen och kvantifiera vibrationer i ett padelrack. / The purpose of measuring vibrations and recoils in a padel racket in this thesis is to develop a prototype that can be used as a training equipment to reduce the risk of injury. A common injury for padel players is tennis elbow, studies show that the cause of this injury are microtraumas from vibrations and recoils. Through a literature study in the subject, system demands for a sensor-based system have been defined. The system that has been used to measure vibrations and recoils have been attached to the bottom of the handle on the padel racket. To achieve controlled tests two different test environments have been developed. To identify and analyze impacts the system utilizes frequency analysis, correlation tests and displacement tracking. For identification of the impact area the racket was divided into five zones. The result indicates, that two of the impact zones generate less vibrations than the others. The result also shows that identification of impact zone varies between the test environments and that only the sweet spot can be identified in both cases. The system identified the impact zone correctly in 18 out of 25 strokes in one test environment and 9 out of 25 in the other. To further improve the methods for identification of the impact zone more analyses and correlations tests are required. One conclusion for this thesis is that it can be used as a platform for further development of a sensor-based system that can correctly identify impacts in all zones and quantify the resulting vibrations.

Repetitive tasks, awkward hand/wrist postures and forceful exertions are known risk factors for work-related musculoskeletal disorders (WMSDs) of the hand and wrist. WMSD is a major cause of long work absence, productivity loss, loss in wages and individual suffering. Currently available assessment methods of the hand/wrist motion have the limitations of being inaccurate, e.g. when using self-reports or observations, or expensive and resource-demanding for following analyses, e.g. when using the electrogoniometers. Therefore, there is a need for a risk assessment method that is easy-to-use and can be applied by both researchers and practitioners for measuring wrist angular velocity during an 8-hour working day. Wearable Inertial Measurement Units (IMU) in combination with mobile phone applications provide the possibility for such a method. In order to apply the IMU in the field for assessing the wrist velocity of different work tasks, the accuracy of the method need to be examined. Therefore, this laboratory experiment was conducted to compare a new IMU-based method with the traditional goniometer and standard optical motion capture system. The laboratory experiment was performed on twelve participants. Three standard hand movements, including hand/wrist motion of Flexion-extension (FE), Deviation, and Pronationsupination (PS) at 30, 60, 90 beat-per-minute (bpm), and three simulated work tasks were performed. The angular velocity of the three methods at 50th and 90th percentile were calculated and compared. The mean absolute error and correlation coefficient were analysed for comparing the methods. Increase in error was observed with increase in speed/bpm during the standard hand movements. For standard hand movements, comparison between IMUbyaxis and Goniometer had the smallest difference and highest correlation coefficient. For simulated work tasks, the difference between goniometer and optical system was the smallest. However, for simulated work tasks, the differences between the compared methods were in general much larger than the standard hand movements. The IMU-based method is seen to have potential when compared with the traditional measurement methods. Still, it needs further improvement to be used for risk assessment in the field. / Upprepade uppgifter, besvärliga hand- / handledsställningar och kraftfulla ansträngningar är kända riskfaktorer för arbetsrelaterade muskuloskeletala störningar (WMSD) i hand och handled. WMSD är en viktig orsak till lång frånvaro, produktivitetsförlust, löneförlust och individuellt lidande. För närvarande tillgängliga bedömningsmetoder för hand / handledsrörelser har begränsningarna att vara felaktiga, t.ex. när du använder självrapporter eller observationer, eller dyra och resurskrävande för följande analyser, t.ex. när du använder elektrogoniometrarna. Därför finns det ett behov av en riskbedömningsmetod som är enkel att använda och som kan användas av både forskare och utövare för att mäta handledens vinkelhastighet under en 8-timmars arbetsdag. Wearable Inertial Measuring Units (IMU) i kombination med mobiltelefonapplikationer ger möjlighet till en sådan metod. För att kunna använda IMU i fältet för att bedöma handledens hastighet för olika arbetsuppgifter måste metodens noggrannhet undersökas. Därför genomfördes detta laboratorieexperiment för att jämföra en ny IMU-baserad metod med den traditionella goniometern och det vanliga optiska rörelsefångningssystemet. Laboratorieexperimentet utfördes på tolv deltagare. Tre standardhandrörelser, inklusive hand / handledsrörelse av Flexion-extension (FE), Deviation och Pronation-supination (PS) vid 30, 60, 90 beat-per-minut (bpm) och tre simulerade arbetsuppgifter utfördes. Vinkelhastigheten för de tre metoderna vid 50: e och 90: e percentilen beräknades och jämfördes. Det genomsnittliga absoluta felet och korrelationskoefficienten analyserades för att jämföra metoderna. Ökning av fel observerades med ökning av hastighet/bpm under standardhandrörelserna. För standardhandrörelser hade jämförelsen mellan IMUbyaxis och Goniometer den minsta skillnaden och högsta korrelationskoefficienten. För simulerade arbetsuppgifter var skillnaden mellan goniometer och optiskt system den minsta. För simulerade arbetsuppgifter var dock skillnaderna mellan de jämförda metoderna i allmänhet mycket större än de vanliga handrörelserna. Den IMUbaserade metoden anses ha potential jämfört med traditionella mätmetoder. Ändå behöver det förbättras för att kunna användas för riskbedömning på fältet.

Um den Einfluss des Sitzpolsters in Radhosen auf den mechanischen Komfort besser zu verstehen, wurden der Satteldruck und die Beckenbewegung in Abhängigkeit der Belastungsintensität sowie -dauer beim Radfahren analysiert. Die Ergebnisse der initialen Datenanalyse deuten darauf hin, dass weniger die Stabilitätsparameter, sondern eher die Druckwahrnehmung für die Beurteilung des mechanischen Komforts maßgeblich ist. / In order to better understand the influence of the seat pad in cycling shorts on mechanical comfort, saddle pressure and pelvic movement were analyzed as a function of load intensity as well as duration during cycling. The results of the initial data analysis indicate that it is not so much the stability parameters but rather the pressure perception that is decisive for the assessment of mechanical comfort.

Diese Arbeit zeigt den explorativen Ansatz ein künstliches neuronales Netz (kNN) und Daten einer auf dem Ski befindlichen inertialen Messeinheit (IMU) zu verwenden, um auf die Fahrgeschwindigkeit zu schließen. Für das Training des kNN wird dabei die 3D Geschwindigkeit einer auf dem Ski befindlichen GNSS-Antenne als Zielwert verwendet. / This work shows the exploratory approach of using an artificial neural network (kNN) and data from an inertial measurement unit (IMU) located on the ski to infer the ski speed. For the training of the kNN, the 3D speed of a GNSS antenna on the ski is used as a target value.

Les systèmes multi-capteurs exploitent les complémentarités des différentes sources sensorielles. Par exemple, le capteur visuo-inertiel permet d’estimer la pose à haute fréquence et avec une grande précision. Les méthodes de vision mesurent la pose à basse fréquence mais limitent la dérive causée par l’intégration des données inertielles. Les centrales inertielles mesurent des incréments du déplacement à haute fréquence, ce que permet d’initialiser la vision et de compenser la perte momentanée de celle-ci. Cette thèse analyse deux aspects du problème. Premièrement, nous étudions les méthodes visuelles directes pour l’estimation de pose, et proposons une nouvelle technique basée sur la corrélation entre des images et la pondération des régions et des pixels, avec une optimisation inspirée de la méthode de Newton. Notre technique estime la pose même en présence des changements d’illumination extrêmes. Deuxièmement, nous étudions la fusion des données a partir de la théorie de la commande. Nos résultats principaux concernent le développement d’observateurs pour l’estimation de pose, biais IMU et l’autocalibrage. Nous analysons la dynamique de rotation d’un point de vue non linéaire, et fournissons des observateurs stables dans le groupe des matrices de rotation. Par ailleurs, nous analysons la dynamique de translation en tant que système linéaire variant dans le temps, et proposons des conditions d’observabilité uniforme. Les analyses d’observabilité nous permettent de démontrer la stabilité uniforme des observateurs proposés. La méthode visuelle et les observateurs sont testés et comparés aux méthodes classiques avec des simulations et de vraies données visuo-inertielles. / Systems with multiple sensors can provide information unavailable from a single source, and complementary sensory characteristics can improve accuracy and robustness to many vulnerabilities as well. Explicit pose measurements are often performed either with high frequency or precision, however visuo-inertial sensors present both features. Vision algorithms accurately measure pose at low frequencies, but limit the drift due to integration of inertial data. Inertial measurement units yield incremental displacements at high frequencies that initialize vision algorithms and compensate for momentary loss of sight. This thesis analyzes two aspects of that problem. First, we survey direct visual tracking methods for pose estimation, and propose a new technique based on the normalized crosscorrelation, region and pixel-wise weighting together with a Newton-like optimization. This method can accurately estimate pose under severe illumination changes. Secondly, we investigate the data fusion problem from a control point of view. Main results consist in novel observers for concurrent estimation of pose, IMU bias and self-calibration. We analyze the rotational dynamics using tools from nonlinear control, and provide stable observers on the group of rotation matrices. Additionally, we analyze the translational dynamics using tools from linear time-varying systems, and propose sufficient conditions for uniform observability. The observability analyses allow us to prove uniform stability of the observers proposed. The proposed visual method and nonlinear observers are tested and compared to classical methods using several simulations and experiments with real visuo-inertial data.

Inertial Measurement Unit (IMU) and Global Positioning System (GPS) receivers are sensors that are widely used for land vehicle navigation. GPS receivers provide position and/or velocity data to any user on the Earth&rsquo / s surface independent of his position. Yet, there are some conditions that the receiver encounters difficulties, such as weather conditions and some blockage problems due to buildings, trees etc. Due to these difficulties, GPS receivers&rsquo / errors increase. On the other hand, IMU works with respect to Newton&rsquo / s laws. Thus, in stark contrast with other navigation sensors (i.e. radar, ultrasonic sensors etc.), it is not corrupted by external signals. Owing to this feature, IMU is used in almost all navigation applications. However, it has some disadvantages such as possible alignment errors, computational errors and instrumentation errors (e.g., bias, scale factor, random noise, nonlinearity etc.). Therefore, a fusion or integration of GPS and IMU provides a more accurate navigation data compared to only GPS or only IMU navigation data. v In this thesis, loosely coupled GPS/IMU integration systems are implemented using feed forward and feedback configurations. The mechanization equations, which convert the IMU navigation data (i.e. acceleration and angular velocity components) with respect to an inertial reference frame to position, velocity and orientation data with respect to any desired frame, are derived for the geographical frame. In other words, the mechanization equations convert the IMU data to the Inertial Navigation System (INS) data. Concerning this conversion, error model of INS is developed using the perturbation of the mechanization equations and adding the IMU&rsquo / s sensor&rsquo / s error model to the perturbed mechanization equation. Based on this error model, a Kalman filter is constructed. Finally, current navigation data is calculated using IMU data with the help of the mechanization equations. GPS receiver supplies external measurement data to Kalman filter. Kalman filter estimates the error of INS using the error mathematical model and current navigation data is updated using Kalman filter error estimates. Within the scope of this study, some real experimental tests are carried out using the software developed as a part of this study. The test results verify that feedback GPS/INS integration is more accurate and reliable than feed forward GPS/INS. In addition, some tests are carried out to observe the results when the GPS receiver&rsquo / s data lost. In these tests also, the feedback GPS/INS integration is observed to have better performance than the feed forward GPS/INS integration.

The thesis work evaluates a method to estimate the volume of stone and gravelpiles using only a cellphone to collect video and sensor data from the gyroscopesand accelerometers. The project is commissioned by Escenda Engineering withthe motivation to replace more complex and resource demanding systems with acheaper and easy to use handheld device. The implementation features popularcomputer vision methods such as KLT-tracking, Structure-from-Motion, SpaceCarving together with some Sensor Fusion. The results imply that it is possible toestimate volumes up to a certain accuracy which is limited by the sensor qualityand with a bias. / I rapporten framgår hur volymen av storskaliga objekt, nämligen grus-och stenhögar,kan bestämmas i utomhusmiljö med hjälp av en mobiltelefons kamerasamt interna sensorer som gyroskop och accelerometer. Projektet är beställt avEscenda Engineering med motivering att ersätta mer komplexa och resurskrävandesystem med ett enkelt handhållet instrument. Implementationen använderbland annat de vanligt förekommande datorseendemetoderna Kanade-Lucas-Tommasi-punktspårning, Struktur-från-rörelse och 3D-karvning tillsammans medenklare sensorfusion. I rapporten framgår att volymestimering är möjligt mennoggrannheten begränsas av sensorkvalitet och en bias.

Goal of this thesis is localization of mobile robot in OpenStreet map segment. Robot IMU, odometry and compass sensors are used for trajectory reconstruction, which is compared to reference GPS trajectory. Extended Monte Carlo localization and clusterization are used for robot localization. Software is implemented in C++ with ROS middleware.

This thesis deals with multi-axis position sensors, their nature and individual parts and types of these sensors. It is outlined their historical origin and the most used modern types, such as micro-electro-mechanical sensors. Further, the properties of these sensors, error sources and their compensation are discussed. Output data formats are also discussed here, such as Euler angles, their calculation and applications. The selected sensor is implemented in the simulator electronics, and the graphical application demonstrates its functions.