The main motivation of this study is the design of a control strategy for semi-active vehicle suspension systems to improve ride comfort for road vehicles. In order to achieve this objective, firstly the damping characteristics of Magnetorheological dampers will be reviewed. Then an appropriate semi-active control strategy manipulating the inputs of the dampers to create suitable damping forces will be designed. Linear Quadratic Regulator (LQR) control strategy is the primary focus area on semi-active control throughout this study. Further, skyhook controllers are examined and compared with optimal LQR controllers. The semi-active controller is tuned using a linearized full (4 wheel) vehicle ride model with seven degrees of freedom. Some selected simulations are carried out by using a nonlinear model to tune LQR controller in an effort to optimize bounce, pitch, and roll motion of the vehicle. Time domain simulations and frequency response analysis are used to justify the effectiveness of the proposed LQR control strategy.

<p>Networked embedded control systems are present almost everywhere. A recent trend is to introduce wireless sensor networks in these systems, to take advantage of the added mobility and flexibility offered by wireless solutions. In such networks, the sensor observations are typically quantized and transmitted over noisy links. Concerning the problem of closed-loop control over such non-ideal communication channels, relatively few works have appeared so far. This thesis contributes to this field, by studying some fundamentally important problems in the design of joint source--channel coding and optimal control.</p><p>The main part of the thesis is devoted to joint design of the coding and control for scalar linear plants, whose state feedbacks are transmitted over binary symmetric channels. The performance is measured by a finite-horizon linear quadratic cost function. The certainty equivalence property of the studied systems is utilized, since it simplifies the overall design by separating the estimation and the control problems. An iterative optimization algorithm for training the encoder--decoder pairs, taking channel errors into account in the quantizer design, is proposed. Monte Carlo simulations demonstrate promising improvements in performance compared to traditional approaches.</p><p>Event-triggered control strategies are a promising solution to the problem of efficient utilization of communication resources. The basic idea is to let each control loop communicate only when necessary. Event-triggered and quantized control are combined for plants affected by rarely occurring disturbances. Numerical experiments show that it is possible to achieve good control performance with limited control actuation and sensor communication.</p>

We study canonical forms for Hamiltonian and symplectic matrices or pencils under equivalence transformations which keep the class invariant. In contrast to other canonical forms our forms are as close as possible to a triangular structure in the same class. We give necessary and sufficient conditions for the existence of Hamiltonian and symplectic triangular Jordan, Kronecker and Schur forms. The presented results generalize results of Lin and Ho [17] and simplify the proofs presented there.

The work selects a specific issue from the numerical analysis of optimal control problems. We investigate a linear-quadratic optimal control problem based on a partial differential equation on 3-dimensional non-convex domains. Based on efficient solution methods for the partial differential equation an algorithm known from control theory is applied. Now the main objectives are to prove that there is no degradation in efficiency and to verify the result by numerical experiments. We describe a solution method which has second order convergence, although the intermediate control approximations are piecewise constant functions. This superconvergence property is gained from a special projection operator which generates a piecewise constant approximation that has a supercloseness property, from a sufficiently graded mesh which compensates the singularities introduced by the non-convex domain, and from a discretization condition which eliminates some pathological cases. Both isotropic and anisotropic discretizations are investigated and similar superconvergence properties are proven. A model problem is presented and important results from the regularity theory of solutions to partial differential equation in non-convex domains have been collected in the first chapters. Then a collection of statements from the finite element analysis and corresponding numerical solution strategies is given. Here we show newly developed tools regarding error estimates and projections into finite element spaces. These tools are necessary to achieve the main results. Known fundamental statements from control theory are applied to the given model problems and certain conditions on the discretization are defined. Then we describe the implementation used to solve the model problems and present all computed results.

We consider the solution of nonlinear optimal control problems subject to stochastic perturbations with incomplete observations. In particular, we generalize results obtained by Ito and Kunisch in [8] where they consider a receding horizon control (RHC) technique based on linearizing the problem on small intervals. The linear-quadratic optimal control problem for the resulting time-invariant (LTI) problem is then solved using the linear quadratic Gaussian (LQG) design. Here, we allow linearization about an instationary reference trajectory and thus obtain a linear time-varying (LTV) problem on each time horizon. Additionally, we apply a model predictive control (MPC) scheme which can be seen as a generalization of RHC and we allow covariance matrices of the noise processes not equal to the identity. We illustrate the MPC/LQG approach for a three dimensional reaction-diffusion system. In particular, we discuss the benefits of time-varying linearizations over time-invariant ones.

Made available in DSpace on 2014-06-11T19:27:14Z (GMT). No. of bitstreams: 0 Previous issue date: 2009-02-05Bitstream added on 2014-06-13T20:55:57Z : No. of bitstreams: 1 alegre_dm_me_ilha.pdf: 954109 bytes, checksum: 3e5701b2e8747b004da37b4ca12ca513 (MD5) / Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP) / O presente trabalho apresenta a metodologia dos observadores de estado para a detecção e localização de falhas em sistemas contendo elementos finitos de placas de Kirchoff. Tal metodologia consiste na montagem de um banco de observadores de estado, o qual é capaz de detectar falhas presentes no sistema, além de localizar o componente danificado e a porcentagem de falha. As matrizes de ganho dos observadores de estado foram determinadas por dois métodos distintos: o método Regulador Quadrático Linear e das Desigualdades Matriciais Lineares. Nesse trabalho, foi utilizada uma placa plana fina montada sobre um sistema de suspensão similar ao de uma plataforma veicular, representando um veiculo simplificadamente. A modelagem da plataforma utilizada foi realizada mediante a utilização do método dos elementos finitos, considerando-se diferentes números de elemento no modelo. O tipo do elemento finito utilizado foi o elemento de placa de Kirchoff. Adicionalmente foi analisada a influência de elementos de controle junto à suspensão da plataforma no movimento da mesma. O modelo considerado, juntamente com os programas computacionais desenvolvidos, foram utilizados para a simulação do movimento da plataforma. Na literatura, normalmente são apresentadas simulações para o movimento de apenas ¼ do veículo, neste trabalho, no entanto, os programas desenvolvidos podem simular o movimento do veiculo inteiro. Foram realizadas simulações computacionais para o movimento da plataforma com a finalidade de se detectar e localizar falhas introduzidas nos elementos da suspensão e também foram realizados testes experimentais, com os mesmos fins. Mediante tais testes (teóricos e experimentais) verificou-se a eficácia da metodologia desenvolvida e a sua principal limitação: o número de elementos finitos considerado no modelo relacionado com o número de medidas efetuadas e a observabilidade do sistema. / This work presents the state observers methodology for the detection and location of faults in systems containing finite elements of plate of Kirchoff. This methodology consists in the assembly of a bank of state observers, which is capable of detecting faults in the system, and also to locate the damaged component and the percentage of failure. The gain matrices of the state observers were determined by two different methods, these are the method Linear Quadratic Regulator and the Linear Matrix Inequalities. In this work was considered a thin plate mounted on a suspension system that is similar to a vehicle platform, representing a vehicle in a simplified way. The modeling of the platform used was performed by using the finite element method, considering different numbers of element in the model. The finite element used was the Kirchoff’s plate element. It was also studied the influence of elements of control, together with the suspension of the platform, into its movement. The model considered, together with the developed computational programs, were used to simulate the movement of the platform. In the literature, usually are presented simulations for the movement of only ¼ of the vehicle, in this work, the developed programs can simulate the movement of the entire vehicle. It was realized computational simulations for the movement of the platform in order to detect and locate faults introduced in the elements of the suspension and experimental tests were also conducted with the same purpose. Through such tests (theoretical and experimental) it was verified the effectiveness of the developed methodology and its major limitation: the number of finite elements considered in the model related with the number of outputs and the observability of the system.

O estudo da estabilidade e desempenho em sistemas de controle é um tópico relevante na teoria de sistemas. Quando são assumidas incertezas no modelo da planta, existe uma maior dificuldade para garantir um nível de desempenho adequado do sistema dinâmico e a estabilidade pode ser comprometida. Neste trabalho são utilizados um regulador linear quadrático robusto e um filtro de Kalman robusto combinados em uma única formulação para tratar de sistemas dinâmicos incertos em tempo real. O caso de estudo selecionado é o pêndulo invertido. Seus principais desafios de controle encontrados na literatura: estabilização, seguimento e levantamento-captura, serão considerados. Os algoritmos utilizados são motivados pelo fato de que problemas estocásticos podem ser resolvidos por meio de argumentos determinísticos, baseados nos conceitos de função penalidade e mínimos quadrados regularizados. Desta forma, é possível a obtenção do melhor desempenho em contrapartida à máxima influência de incerteza admissível. A análise de desempenho do controlador robusto é realizada por meio de ensaios práticos incluindo incertezas na planta, ruído nos sensores e distúrbios no sinal de controle do pêndulo. / The study of stability and performance in control systems is a relevant topic in systems theory. When uncertainties are considered in the model of the plant, there is a greater difficulty in ensuring an appropriate performance level of the dynamic system, plus, the stability could be compromised as well. In this dissertation a robust linear quadratic regulator and a robust Kalman filter are used in a unified manner to deal with uncertain dynamic systems in real time. The selected case study is the inverted pendulum. Its main control challenges found in the literature will be considered: stabilization, tracking and catching swing-up. The used algorithms are motivated by the fact that stochastic problems can be solved through deterministic arguments based on the concepts of penalty function and regularized least-squares. Thus, it is possible to obtain an optimal performance for the maximum acceptable uncertainty. The performance analysis of the robust control is carried out by practical experiments including uncertainties in the plant, noise in the sensors and disturbance in the pendulum control signal.

Orientador: Prof. Dr. Alfeu Joãzinho Sguarezi Filho / Coorientador: Prof. Dr. José Alberto Torrico Altuna / Tese (doutorado) - Universidade Federal do ABC. Programa de Pós-Graduação em Energia, Santo André, 2018.

This thesis presents the design, construction, and control of a two-wheeled inverted pendulum (TWIP) robotic walker prototype for assisting mobility-impaired users with balance and fall prevention. A conceptual model of the robotic walker is developed and used to illustrate the purpose of this study. A linearized mathematical model of the two-wheeled system is derived using Newtonian mechanics. A control strategy consisting of a decoupled LQR controller and three state variable controllers is developed to stabilize the platform and regulate its behavior with robust disturbance rejection performance. Simulation results reveal that the LQR controller is capable of stabilizing the platform and rejecting external disturbances while the state variable controllers simultaneously regulate the system’s position with smooth and minimum jerk control. A prototype for the two-wheeled system is fabricated and assembled followed by the implementation and tuning of the control algorithms responsible for stabilizing the prototype and regulating its position with optimal performance. Several experiments are conducted, confirming the ability of the decoupled LQR controller to robustly balance the platform while the state variable controllers regulate the platform’s position with smooth and minimum jerk control.

This diploma thesis deals with control the Ball on the wheel system in real time. In the first part there is made mathematical model of system, which is described by state equations. Then the laboratory model of Ball on the wheel system and its parts are described. The laboratory model consists servo drive, servo amplifier, microcontroller with real-time operating system and distance sensors. In the practical part of the thesis there is designed control of system by linear quadratic regulator and its implementation with control peripherals into microcontroller with real-time operating system. Ball on the wheel system is controlled by microcontroller, which sends a commands to servo amplifier by CAN bus.