We investigate into the limitations of the sum-product algorithm for binary low density parity check (LDPC) codes having isolated short cycles. Independence assumption among messages passed, assumed reasonable in all configurations of graphs, fails the most in graphical structures with short cycles. This research work is a step forward towards understanding the effect of short cycles on error floors of the sum-product algorithm. We propose a modified sum-product algorithm by considering the statistical dependency of the messages passed in a cycle of length 4. We also formulate a modified algorithm in the log domain which eliminates the numerical instability and precision issues associated with the probability domain. Simulation results show a signal to noise ratio (SNR) improvement for the modified sum-product algorithm compared to the original algorithm. This suggests that dependency among messages improves the decisions and successfully mitigates the effects of length-4 cycles in the Tanner graph. The improvement is significant at high SNR region, suggesting a possible cause to the error floor effects on such graphs. Using density evolution techniques, we analysed the modified decoding algorithm. The threshold computed for the modified algorithm is higher than the threshold computed for the sum-product algorithm, validating the observed simulation results. We also prove that the conditional entropy of a codeword given the estimate obtained using the modified algorithm is lower compared to using the original sum-product algorithm.

Digital technology has made complex signal processing possible in communication systems and greatly improved the performance and quality of most modern telecommunication systems. The telecommunication industry and specifically mobile wireless telephone and computer networks have shown phenomenal growth in both the number of subscribers and emerging services, resulting in rapid consumption of common resources of which the electromagnetic spectrum is the most important. Technological advances and research in digital communication are necessary to satisfy the growing demand, to fuel the demand and to exploit all the possibilities and business opportunities. Efficient management and distribution of resources facilitated by state-of-the-art algorithms are indispensable in modern communication networks. The challenge in communication system design is to construct a system that can accurately reproduce the transmitted source message at the receiver. The channel connecting the transmitter and receiver introduces detrimental effects and limits the reliability and speed of information transfer between the source and destination. Typical channel effects encountered in mobile wireless communication systems include path loss between the transmitter and receiver, noise caused by the environment and electronics in the system, and fading caused by multiple paths and movement in the communication channel. In multiple access systems, different users cause interference in each other’s signals and adversely affect the system performance. To ensure reliable communication, methods to overcome channel effects must be devised and implemented in the system. Techniques used to improve system performance and capacity include temporal, frequency, polarisation and spatial diversity. This dissertation is concerned mainly with temporal or time diversity. Channel coding is a temporal diversity scheme and aims to improve the system error performance by adding structured redundancy to the transmitted message. The receiver exploits the redundancy to infer with greater accuracy which message was transmitted, compared with uncoded systems. Sparse graph codes are channel codes represented as sparse probabilistic graphical models which originated in artificial intelligence theory. These channel codes are described as factor graph structures with bit nodes, representing the transmitted codeword bits, and bit-constrained or check nodes. Each constraint involves only a small number of code bits, resulting in a sparse factor graph with far fewer connections between bit and check nodes than the maximum number of possible connections. Sparse graph codes are iteratively decoded using message passing or belief propagation algorithms. Three classes of iteratively decodable channel codes are considered in this study, including low-density parity-check (LDPC), Turbo and repeat-accumulate (RA) codes. The modulation platform presented in this dissertation is a spectrally efficient wideband system employing orthogonal complex spreading sequences (CSSs) to spread information sequences over a wider frequency band in multiple modulation dimensions. Special features of these spreading sequences include their constant envelopes and power output, providing communication range or device battery life advantages. This study shows that multiple layer modulation (MLM) can be used to transmit parallel data streams with improved spectral efficiency compared with single-layer modulation, providing data throughput rates proportional to the number of modulation layers at performances equivalent to single-layer modulation. Alternatively, multiple modulation layers can be used to transmit coded information to achieve improved error performance at throughput rates equivalent to a single layer system / Dissertation (MEng (Electronic Engineering))--University of Pretoria, 2007. / Electrical, Electronic and Computer Engineering / unrestricted

One of the most important technologies used in modern communication systems is channel coding. Channel coding dates back to a paper published by Shannon in 1948 [1] entitled “A Mathematical Theory of Communication”. The basic idea behind channel coding is to send redundant information (parity) together with a message to make the transmission more error resistant. There are different types of codes that can be used to generate the parity required, including block, convolutional and concatenated codes. A special subclass of codes consisting of the codes mentioned in the previous paragraph, is sparse graph codes. The structure of sparse graph codes can be depicted via a graphical representation: the factor graph which has sparse connections between its elements. Codes belonging to this subclass include Low-Density-Parity-Check (LDPC) codes, Repeat Accumulate (RA), Turbo and fountain codes. These codes can be decoded by using the belief propagation algorithm, an iterative algorithm where probabilistic information is passed to the nodes of the graph. This dissertation focuses on noisy decoding of fountain codes using belief propagation decoding. Fountain codes were originally developed for erasure channels, but since any factor graph can be decoded using belief propagation, noisy decoding of fountain codes can easily be accomplished. Three fountain codes namely Tornado, Luby Transform (LT) and Raptor codes were investigated during this dissertation. The following results were obtained: <ol> <li>The Tornado graph structure is unsuitable for noisy decoding since the code structure protects the first layer of parity instead of the original message bits (a Tornado graph consists of more than one layer).</li> <li> The successful decoding of systematic LT codes were verified.</li> <li>A systematic Raptor code was introduced and successfully decoded. The simulation results show that the Raptor graph structure can improve on its constituent codes (a Raptor code consists of more than one code).</li></ol> Lastly an LT code was used to replace the convolutional incremental redundancy scheme used by the 2G mobile standard Enhanced Data Rates for GSM Evolution (EDGE). The results show that a fountain incremental redundancy scheme outperforms a convolutional approach if the frame lengths are long enough. For the EDGE platform the results also showed that the fountain incremental redundancy scheme outperforms the convolutional approach after the second transmission is received. Although EDGE is an older technology, it still remains a good platform for testing different incremental redundancy schemes, since it was one of the first platforms to use incremental redundancy. / Dissertation (MEng)--University of Pretoria, 2008. / Electrical, Electronic and Computer Engineering / MEng / unrestricted

Low-Density Parity-Check (LDPC) codes are linear error-correcting codes used to establish reliable communication between units on a noisy transmission channel in mobile telecommunications. LDPC algorithms detect and recover altered or corrupted message bits using sparse parity-check matrices in order to decipher messages correctly. LDPC codes have been shown to be fitting coding schemes for the fifth generation (5G) New Radio (NR), according to the third generation partnership project (3GPP).  TietoEvry, a consultant in telecom, has discovered that optimizations of LDPC decoding algorithms can be achieved/obtained with the use of a parallel computing platform called Compute Unified Device Architecture (CUDA), developed by NVIDIA. This platform utilizes the capabilities of a graphics processing unit (GPU) rather than a central processing unit (CPU), which in turn provides parallel computing. An optimized version of an LDPC decoding algorithm, the Min-Sum Algorithm (MSA), is implemented in CUDA and in C++ for comparison in terms of CPU execution time, to explore the capabilities that CUDA offers. The testing is done with a set of 12 sparse parity-check matrices and input-channel messages with different sizes. As a result, the CUDA implementation executes approximately 55% faster than a standard, unoptimized C++ implementation.

Esta tesis estudia la distribución de ficheros en redes inalámbricas, analizando diferentes mecanismos que permiten optimizar la transmisión en términos de ancho de banda y calidad de experiencia. Concretamente, la tesis se centra en la transmisión de ficheros en canales multicast. Dicha transmisión resulta adecuada en ciertos entornos y tiene múltiples aplicaciones, algunas de las cuales se presentan en este trabajo. La tesis analiza en profundidad FLUTE (File Delivery over Unidirectional Transport), un protocolo para el envío fiable de ficheros en canales unidireccionales, y presenta algunas propuestas para mejorar la transmisión a través de dicho protocolo. En este sentido, una de las bases de este protocolo es el uso de un mecanismo llamado Tabla de Envío de Ficheros (FDT), que se utiliza para describir los contenidos transmitidos. Este trabajo analiza cómo la transmisión de la FDT afecta al funcionamiento del protocolo FLUTE, y proporciona una metodología para optimizar el envío de contenido mediante FLUTE. Por otro lado, en la transmisión de ficheros por multicast resulta esencial ofrecer un servicio fiable. Entre los distintos mecanismos utilizados por FLUTE para ofrecer fiabilidad, este trabajo analiza principalmente los códigos de corrección AL-FEC (Application Layer ¿ Forward Error Correction), los cuales añaden redundancia a la transmisión para minimizar los efectos de las pérdidas en el canal. Al respecto, esta tesis evalúa los códigos LDPC Staircase y LDPC Triangle, comparando su funcionamiento bajo diferentes condiciones de transmisión. Además, en el caso de tener un canal de retorno, una de las principales contribuciones de esta tesis es la propuesta de códigos LDPC adaptativos para servicios de descarga de ficheros. En esta clase de códigos, el servidor de contenidos cambia dinámicamente la cantidad de protección FEC proporcionada en función de las pérdidas que detectan los usuarios. La evaluación demuestra el buen funcionamiento de estos códigos en distintos entornos. / De Fez Lava, I. (2014). Evaluation of a content download service based on FLUTE and LDPC for improving the Quality of Experience over multicast wireless networks [Tesis doctoral]. Editorial Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/37051 / Premios Extraordinarios de tesis doctorales

Two dimensional magnetic recording (TDMR) achieves high areal densities by reducing the size of a bit comparable to the size of the magnetic grains resulting in two dimensional (2D) inter symbol interference (ISI) and very high media noise. Therefore, it is critical to handle the media noise along with the 2D ISI detection. In this paper, we tune the generalized belief propagation (GBP) algorithm to handle the media noise seen in TDMR. We also provide an intuition into the nature of hard decisions provided by the GBP algorithm. The performance of the GBP algorithm is evaluated over a Voronoi based TDMR channel model where the soft outputs from the GBP algorithm are used by a belief propagation (BP) algorithm to decode low-density parity check (LDPC) codes.

We implement a package for the construction of a new class of Low Density Parity Check (LDPC) codes based on a new random high girth graph construction technique, and study the performance of the codes so constructed on both the Additive White Gaussian Noise (AWGN) channel as well as the Binary Erasure Channel (BEC). Our codes are “near regular”, meaning thereby that the the left degree of any node in the Tanner graph constructed varies by at most 1 from the average left degree and so also the right degree. The simulations for rate half codes indicate that the codes perform better than both the regular Progressive Edge Growth (PEG) codes which are constructed using a similar random technique, as well as the MacKay random codes. For high rates the ARG (Almost Regular high Girth) codes perform better than the PEG codes at low to medium SNR’s but the PEG codes seem to do better at high SNR’s. We have tried to track both near codewords as well as small weight codewords for these codes to examine the performance at high rates. For the binary erasure channel the performance of the ARG codes is better than that of the PEG codes. We have also proposed a modification of the sum-product decoding algorithm, where a quantity called the “node credibility” is used to appropriately process messages to check nodes. This technique substantially reduces the error rates at signal to noise ratios of 2.5dB and beyond for the codes experimented on. The average number of iterations to achieve this improved performance is practically the same as that for the traditional sum-product algorithm.

This thesis investigates both theoretical and practical aspects of the design and analysis of modern error-control coding schemes, namely low-density parity-check (LDPC) codes and rateless codes for unequal error protection (UEP). It also studies the application of modern error-control codes in efficient data dissemination in wireless ad-hoc and sensor networks. Two methodologies for the design and analysis of UEP-LDPC codes are proposed. For these proposed ensembles, density evolution formulas over the binary erasure channel are derived and used to optimize the degree distribution of the codes. Furthermore, for the first time, rateless codes that can provide UEP are developed. In addition to providing UEP, the proposed codes can be used in applications for which unequal recovery time is desirable, i.e., when more important parts of data are required to be recovered faster than less important parts. Asymptotic behavior of the UEP-rateless codes under the iterative decoding is investigated. In addition, the performance of the proposed codes is examined under the maximum-likelihood decoding, when the codes have short to moderate lengths. Results show that UEP-rateless codes are able to provide very low error rates for more important bits with only a subtle loss in the performance of less important bits. Moreover, it is shown that given a target bit error rate, different parts of the information symbols can be decoded after receiving different numbers of encoded symbols. This implies that information can be recovered in a progressive manner, which is of interest in many practical applications such as media-on-demand systems. This work also explores fundamental research problems related to applying error-control coding such as rateless coding to the problem of reliable and energy-efficient broadcasting in multihop wireless ad-hoc sensor networks. The proposed research touches on the four very large fields of wireless networking, coding theory, graph theory, and percolation theory. Based on the level of information that each node has about the network topology, several reliable and energy-efficient schemes are proposed, all of which are distributed and have low complexity of implementation. The first protocol does not require any information about the network topology. Another protocol, which is more energy efficient, assumes each node has local information about the network topology. In addition, this work proposes a distributed scheme for finding low-cost broadcast trees in wireless networks. This scheme takes into account various parameters such as distances between nodes and link losses. This protocol is then extended to find low-cost multicast trees. Several schemes are extensively simulated and are compared.

Multi-antenna wireless communication systems that employ a large number of antennas have recently stirred a lot of research interest. This is mainly due to the possibility of achieving very high spectral efficiency, power efficiency, and link reliability in such large-scale multiple-input multiple-output (MIMO) systems. An emerging architecture for large-scale multiuser MIMO communications is one where each base station (BS) is equipped with a large number of antennas (tens to hundreds of antennas) and the user terminals are equipped with fewer antennas (one to four antennas) each. The backhaul communication between base stations is also carried out using large number of antennas. Because of the high dimensionality of large-scale MIMO signals, the computational complexity of various transceiver operations can be prohibitively large. Therefore, low complexity techniques that scale well for transceiver signal processing in such large-scale MIMO systems are crucial. The transceiver operations of interest include signal encoding at the transmitter, and channel estimation, detection and decoding at the receiver. This thesis focuses on the design and analysis of novel low-complexity transceiver signal processing schemes for large-scale MIMO systems. In this thesis, we consider two types of large-scale MIMO systems, namely, massive MIMO systems and generalized spatial modulation MIMO (GSM-MIMO) systems. In massive MIMO, the mapping of information bits to modulation symbols is done using conventional modulation alphabets (e.g., QAM, PSK). In GSM-MIMO, few of the avail-able transmit antennas are activated in a given channel use, and information bits are conveyed through the indices of these active antennas, in addition to the bits conveyed through conventional modulation symbols. We also propose a novel modulation scheme named as precoder index modulation, where information bits are conveyed through the index of the chosen precoder matrix as well as the modulation symbols transmitted. Massive MIMO: In this part of the thesis, we propose a novel MIMO receiver which exploits channel hardening that occurs in large-scale MIMO channels. Channel hardening refers to the phenomenon where the off-diagonal terms of HH H become much weaker compared to the diagonal terms as the size of the channel gain matrix H increases. We exploit this phenomenon to devise a low-complexity channel estimation scheme and a message passing algorithm for signal detection at the BS receiver in massive MIMO systems. We refer to the proposed receiver as the channel hardening-exploiting message passing (CHEMP) receiver. The key novelties in the proposed CHEMP receiver are: (i) operation on the matched filtered system model, (ii) Gaussian approximation on the off-diagonal terms of the HH H matrix, and (iii) direct estimation of HH H instead of H and use of this estimate of HH H for detection The performance and complexity results show that the proposed CHEMP receiver achieves near-optimal performance in large-scale MIMO systems at complexities less than those of linear receivers like minimum mean squared error (MMSE) receiver. We also present a log-likelihood ratio (LLR) analysis that provides an analytical reasoning for this better performance of the CHEMP receiver. Further, the proposed message passing based detection algorithm enables us to combine it with low density parity check (LDPC) decoder to formulate a joint message passing based detector-decoder. For this joint detector-decoder, we design optimized irregular binary LDPC codes specific to the massive MIMO channel and the proposed receiver through EXIT chart matching. The LDPC codes thus obtained are shown to achieve improved coded bit error rate (BER) performance compared to off-the-shelf irregular LDPC codes. The performance of the CHEMP receiver degrades when the system loading factor (ratio of the number of users to the number of BS antennas) and the modulation alpha-bet size are large. It is of interest to devise receiver algorithms that work well for high system loading factors and modulation alphabet sizes. For this purpose, we propose a low-complexity factor-graph based vector message passing algorithm for signal detection. This algorithm uses a scalar Gaussian approximation of interference on the basic sys-tem model. The performance results show that this algorithm performs well for large modulation alphabets and high loading factors. We combine this detection algorithm with a non-binary LDPC decoder to obtain a joint detector-decoder, where the field size of the non-binary LDPC code is same as the size of the modulation alphabet. For this joint message passing based detector-decoder, we design optimized non-binary irregular LDPC codes tailored to the massive MIMO channel and the proposed detector. GSM-MIMO: In this part of the thesis, we consider GSM-MIMO systems in point-to-point as well as multiuser communication settings. GSM-MIMO has the advantage of requiring only fewer transmit radio frequency (RF) chains than the number of transmit antennas. We analyze the capacity of point-to-point GSM-MIMO, and obtain lower and upper bounds on the GSM-MIMO system capacity. We also derive an upper bound on the BER performance of maximum likelihood detection in GSM-MIMO systems. This bound is shown to be tight at moderate to high signal-to-noise ratios. When the number of transmit and receive antennas are large, the complexity of en-coding and decoding of GSM-MIMO signals can be prohibitively high. To alleviate this problem, we propose a low complexity GSM-MIMO encoding technique that utilizes com-binatorial number system for bits-to-symbol mapping. We also propose a novel layered message passing (LaMP) algorithm for decoding GSM-MIMO signals. Low computational complexity is achieved in the LaMP algorithm by detecting the modulation bits and the antenna index bits in two deferent layers. We then consider large-scale multiuser GSM-MIMO systems, where multiple users employ GSM at their transmitters to communicate with a BS having a large number of receive antennas. For this system, we develop computationally efficient message passing algorithms for signal detection using vector Gaussian approximation of interference. The performance results of these algorithms show that the GSM-MIMO system outperforms the massive MIMO system by several dBs for the same spectral efficiency. Precoder index modulation: It is known that the performance of a communication link can be enhanced by exploiting time diversity without reducing the rate of transmission using pseudo random phase preceding (PRPP). In order to further improve the performance of GSM-MIMO, we apply PRPP technique to GSM-MIMO systems. PRPP provides additional diversity advantage at the receiver and further improves the performance of GSM-MIMO systems. For PRPP-GSM systems, we propose methods to simultaneously precode both the antenna index bits and the modulation symbols using rectangular precoder matrices. Finally, we extend the idea of index modulation to pre-coding and propose a new modulation scheme referred to as precoder index modulation (PIM). In PIM, information bits are conveyed through the index of a prehared PRPP matrix, in addition to the information bits conveyed through the modulation symbols. PIM is shown to increase the achieved spectral efficiency, in addition to providing diver-sity advantages.

Channel coding plays a vital role in telecommunication. Low-Density Parity- Check (LDPC) codes are linear error-correcting codes. According to the 3rd Generation Partnership Project (3GPP) TS 38.212, LDPC is recommended for the Fifth-generation (5G) New Radio (NR) shared channels due to its high throughput, low latency, low decoding complexity and rate compatibility. LDPC encoding chain has been defined in 3GPP TS 38.212, but some details of LDPC encoding chain are still required to be explored in the MATLAB environment. For example, how to deal with the filler bits for encoding and decoding. However, as the reverse process of LDPC encoding, there is no information on LDPC decoding process for 5G NR shared channels in 3GPP TS 38.212. In this thesis project, LDPC encoding and decoding chains were thoughtfully developed with MATLAB programming based on 3GPP TS 38.212. Several LDPC decoding algorithms were implemented and optimized. The performance of LDPC algorithms was evaluated using block error rate (BLER) v.s. signal to noise ratio (SNR) and CPU time. Results show that the double diagonal structure-based encoding method is an efficient LDPC encoding algorithm for 5G NR. Layered Sum Product Algorithm (LSPA) and Layered Min-Sum Algorithm (LMSA) are more efficient than Sum Product Algorithm (SPA) and Min-Sum Algorithm (MSA). Layered Normalized Min-Sum Algorithm (LNMSA) with proper normalization factor and Layered Offset Min-Sum Algorithm (LOMSA) with good offset factor can optimize LMSA. The performance of LNMSA and LOMSA decoding depends more on code rate than transport block. / Kanalkodning spelar en viktig roll i telekommunikation. Paritetskontrollkoder med låg densitet (LDPC) är linjära felkorrigeringskoder. Enligt tredje generationens partnerskapsprojekt (3GPP) TS 38.212, LDPC rekommenderas för den femte generationens (5G) nya radio (NR) delade kanal på grund av dess höga genomströmning, låga latens, låga avkodningskomplexitet och hastighetskompatibilitet. LDPC kodningskedjan har definierats i 3GPP TS 38.212, men vissa detaljer i LDPC kodningskedjan krävs fortfarande för att utforskas i Matlabmiljön. Till exempel hur man hanterar fyllnadsbitar för kodning och avkodning. Men som den omvända processen för LDPC kodning finns det ingen information om LDPC avkodningsprocessen för 5G NR delade kanaler på 3GPP TS 38.212. I detta avhandlingsprojekt utvecklades LDPC-kodning och avkodningskedjor enligt 3GPP TS 38.212. Flera LDPC-avkodningsalgoritmer implementerades och optimerades. Prestandan för LDPC-algoritmer utvärderades med användning av blockfelshalt (BLER) v.s. signal / brusförhållande (SNR) och CPU-tid. Resultaten visar att den dubbla diagonala strukturbaserade kodningsmetoden är en effektiv LDPC kodningsalgoritm för 5G NR. Layered Sum Product Algorithm (LSPA) och Layered Min-Sum Algorithm (LMSA) är effektivare än Sum Product Algorithm (SPA) och Min-Sum Algorithm (MSA). Layered Normalized Min-Sum Algorithm (LNMSA) med rätt normaliseringsfaktor och Layered Offset Min-Sum Algorithm (LOMSA) med bra offsetfaktor kan optimera LMSA. Prestandan för LNMSA- och LOMSA-avkodning beror mer på kodhastighet än transportblock.