Progress in development of modern LEDs, their long lifetime and high luminous efficacy predetermine them for usage in lighting systems. This master's thesis examines possibilities of application of LEDs in luminaires, parameters of diodes and problems, which can appear in construction of luminaire with LED lighting source. In the practical part of this thesis a luminaire is designed, capable of illuminating traffic signs, vertical surfaces, billboards and fasades. By standards required parameters of a lighting system and adaptability of application must be considered in complex predesign. Simulations of lighting scene, created in special computer software, measurements of optical point’s parameters and construction of real luminaire model using high quality CREE LEDs, are included in analysis of the problem. Parameters of the luminaire were proved by measurements of product’s attributes at light laboratory. There are also some suggestions for improvement and further development of the product.

This presented thesis is focused on the complex description of creation the database system for the lighting. The important static and dynamic parameters of light sources and luminaires are listed in the first part of thesis. These parameters are complemented by the measured values and their relationships. The next chapters of thesis are focused to description of obtained parameters, structural design, historical and expected development of individual representatives of light sources. In the following sections are described current state of used data formats of luminaires and the possibilities for describing of light sources. The database systems are created as a result of this thesis. These databases are used for collecting, sorting, searching and sophisticate comparison of the parameters of light sources and luminaires.

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior / This thesis presents the study and characterization of organic light-emitting diodes (OLEDs) with the proposal of obtaining an equivalent model that is useful in the OLED driver design and in lighting systems projects. Initially, a literature review covering the operating principle and the constructive aspects of OLEDs is presented. From this, a model that integrates scale, photometrical, electrical and thermal aspects is proposed. This model is static and dynamic and is called EFET. A procedure for parameter identification of the model is proposed, jointly with an analysis of the intrinsic capacitance effect on the OLED electrical, thermal and photometrical performance. The proposed model is able to predict and simulate the OLED based lighting systems before building, saving time and cost. The model is validated using different OLED samples and conclusions are derived from the experimental validation and simulation results. An approach considering the dimming methods of OLEDs is presented, showing the chromatic impact caused by each method. Finally, an OLED driver based on the concept of switched capacitor converters is proposed. The thesis results are satisfactory and provide an enhancement to the state of the art in modeling and OLED driving. / A presente tese de doutorado apresenta o estudo e a caracterização de diodos orgânicos emissores de luz (OLEDs) com a proposta de um modelo equivalente que é útil no desenvolvimento de circuitos de acionamento e na análise de OLEDs, quando aplicados em sistemas de iluminação. Inicialmente, é apresentada uma revisão bibliográfica contemplando o princípio de funcionamento e os aspectos construtivos dos OLEDs. A partir disto, um modelo que integra os aspectos de escala, fotométricos, elétricos e térmicos é proposto. Esse modelo é denominado EFET e é dividido em estático e dinâmico. Uma proposta de procedimento para identificação dos parâmetros do modelo é apresentada, juntamente com a análise do efeito da capacitância intrínseca dos OLEDs no seu desempenho elétrico, térmico e fotométrico. Com o modelo proposto pode-se predizer e simular o comportamento dos OLEDs antes de construir o sistema de iluminação, reduzindo custos e tempo de desenvolvimento. O modelo é validado empregando diferentes amostras de OLEDs. Conclusões são obtidas a partir da validação experimental e de simulações empregando simuladores elétricos e da fluidodinâmica computacional através do método de elementos finitos. Uma abordagem considerando os métodos de ajuste da intensidade luminosa de OLEDs é apresentada, evidenciando o impacto cromático provocado por cada método. Por fim, um circuito de acionamento para OLEDs baseado no conceito de capacitores chaveados é proposto. Os resultados obtidos são satisfatórios e proporcionam um incremento ao estado da arte da modelagem e acionamento de OLEDs.

Oblast problémů, ze kterých konkrétní téma projektu vychází, zahrnuje současnou globální transformaci zdrojů energie a jejich dodávek se zvláštní pozorností na obnovitelné zdroje energie. Důraz je kladen zejména na hodnoty jež přináší produkt určený k užívání ve veřejných prostorách. Autorovým zadáním bylo navrhnout osvětlovací jednotku nezávislou na vnějším zdroji napájení. Cílem návrhu je přehodnotit způsob, jakým jsou dnes technologie využívání sluneční a větrné energie běžně používány, a navrhnout řešení přinášející nové vlastnosti a užitné hodnoty pro přímého uživatele i celou společnost. Autor přináší návrh produktu jenž je reakcí na současné globální hrozby a příležitosti. Výsledkem projektu je návrh pouliční lampy kombinující fotovoltaický článek a větrnou turbínu s cílem získat elektrickou energii jež je dočasně akumulována a následně dodávána svítidlu. V návrhu je kladen důraz na požadavky ergonomie a estetickou hodnotu produktu. Navržené řešení znamená finanční přínos z hlediska šetření neobnovitelnými zdroji energie a případnými finančními výhodami pro investora plynoucími z provozování veřejného osvětlení. Pouliční lampa nezávislá na vnějším zdroji napájení má navíc menší negativní dopad na životní prostředí a představuje technologie využívání větrné a solární energie v přívětivé a nerušivé podobě.