Porous organic polymers (POPs) with high physicochemical stability have attracted significant attention from the scientific community as promising platforms for small gas separation adsorbents. Although POPs have amorphous morphology in general, with the help of organic chemistry toolbox, ultrahigh surface area materials can be synthesized. In particular, nitrogen-rich POPs have been studied intensively due to their enhanced framework-CO2 interactions. Postsynthetic modification (PSM) of POPs has been instrumental for incorporating different functional groups into the pores of POPs which would increase the CO2 capture properties. We have shown that functionalizing the surface of POPs with nitro and amine groups increases the CO/N2 and CO2/CH4 selectivity significantly due to selective polarization of CO2 molecule. In addition, controlled postsynthetic nitration of NPOF-1, a nanoporous organic framework constructed by nickel(0)-catalyzed Yamamoto coupling of 1,3,5-tris(4-bromophenyl)benzene, has been performed and is proven to be a promising route to introduce nitro groups and to convert mesopores to micropores without compromising surface area. Reduction of the nitro groups yields aniline-like amine-functionalized NPOF-1-NH2. Adequate basicity of the amine functionalities leads to modest isosteric heats of adsorption for CO2, which allow for high regenerability. The unique combination of high surface area, microporous structure, and amine-functionalized pore walls enables NPOF-1-NH2 to have remarkable CO2 working capacity values for removal from landfill gas and flue gas. Benzimidazole-linked polymers have also been shown to have promising CO2 capture properties. Here, an amine functionalized benzimidazole-linked polymer (BILP-6-NH2) was synthesized via a combination of pre- and postsynthetic modification techniques in two steps. Experimental studies confirm enhanced CO2 uptake in BILP-6-NH2 compared to BILP-6, and DFT calculations were used to understand the interaction modes of CO2 with BILP-6-NH2. Using BILP-6-NH2, higher CO2 uptake and CO2/CH4 selectivity was achieved compared to BILP-6 showing that this material has a very promising working capacity and sorbent selection parameter for landfill gas separation under VSA settings. Additionally, the sorbent evaluation criteria of different classes of organic polymers have been compared in order to reveal structure-property relationships in those materials as solid CO2 adsorbents.

Surfaces that exhibit a gradual change in their chemical and/or physical properties are termed as surface gradients. Based on the changes in properties they are classified either as physical or chemical gradients. Chemical gradients show variations in properties like polarity, charge, functionality concentration and have found potential applications in fields of biology, physics, biosensing, catalysis and separation science. In this dissertation, surface gradients have been prepared using controlled rate infusion (CRI). CRI is a simple method in which a surface gradient is formed by carrying out the infusion of organoalkoxysilane in a time-dependent fashion using a set infusion rate. Depending on concentration of silane, rate of infusion and time of infusion, the gradient profiles on surfaces can be varied and the surface chemistry of the substrate can be altered. Initial work in the dissertation focuses on demonstrating different gradient profiles and selectivity obtained using amine and/ or phenyl functionalized gradient stationary phases on thin layer chromatography (TLC) plates prepared by CRI. The presence of amine and phenyl on the surfaces were confirmed by X-ray Photoelectron Spectroscopy (XPS) and diffuse reflectance spectroscopy, respectively. The change in surface chemistry was demonstrated by changes in the selectivities of water and fat soluble vitamins. After successful preparation and characterization of single and multi-component stationary phase gradients for planar chromatography, single-component gradients were prepared for column chromatography (Silica monolithic columns). Similar to that observed for planar chromatography, the selectivity was evaluated from retention factors and was found to be different for a weak acid/weak base mixture. The results obtained showed the promising approach of using gradient stationary phases in column chromatography. This work was further extended to prepare amine and phenyl multi-component gradients on silica monolithic columns to investigate mixed-mode and synergistic effects. Finally, amine, phenyl and thiol gradients were also prepared on cellulose substrates, particularly water color paper, The goal was to study the formation of functionality gradients on cellulose substrates particularly the interaction between hydroxyl groups on cellulose and silanols and to study the stability of the silanes on the cellulose surface.

Examples of superhydrophobic surfaces found in nature such as self-cleaning property of lotus leaf and walking on water ability of water strider have led to an extensive investigation in this area over the past few decades. When a water droplet rests on a textured surface, it may either form a liquid-solid-vapor composite interface by which the liquid droplet partially sits on air pockets or it may wet the surface in which the water replaces the trapped air depending on the surface roughness and the surface chemistry. Super water repellent surfaces have numerous applications in our daily life such as drag reduction, anti-icing, anti-fogging, energy conservation, noise reduction, and self-cleaning. In fact, the same concept could be applied in designing and producing surfaces that repel organic contaminations (e.g. low surface tension liquids). However, superoleophobic surfaces are more challenging to fabricate than superhydrophobic surfaces since the combination of multiscale roughness with re-entrant or overhang structure and surface chemistry must be provided. In this study, simple, cost-effective and potentially scalable techniques, i.e., airbrush and electrospray, were employed for the sake of making superhydrophobic and superoleophobic coatings with random and patterned multiscale surface roughness. Different types of silicon dioxide were utilized in this work to in order to study and to characterize the effect of surface morphology and surface roughness on surface wettability. The experimental findings indicated that super liquid repellent surfaces with high apparent contact angles and extremely low sliding angles were successfully fabricated by combining re-entrant structure, multiscale surface roughness, and low surface energy obtained from chemically treating the fabricated surfaces. In addition to that, the experimental observations regarding producing textured surfaces in mask-assisted electrospray were further validated by simulating the actual working conditions and geometries using COMSOL Multiphysics.

Ge1-xSnx alloys are among a small class of benign semiconductors with composition tunable bandgaps in the near-infrared spectrum. As the amount of Sn is increased the band energy decreases and a transition from indirect to direct band structure occurs. Hence, they are prime candidates for fabrication of Si-compatible electronic and photonic devices, field effect transistors, and novel charge storage device applications. Success has been achieved with the growth of Ge1-xSnx thin film alloys with Sn compositions up to 34%. However, the synthesis of nanocrystalline alloys has proven difficult due to larger discrepancies (~14%) in lattice constants. Moreover, little is known about the chemical factors that govern the growth of Ge1-xSnx nanoalloys and the effects of quantum confinement on structure and optical properties. A synthesis has been developed to produce phase pure Ge1-xSnx nanoalloys which provides control over both size and composition. Three sets of Ge1-xSnx nanocrystals have been studied, 15–23 nm, 3.4–4.6 nm and 1.5–2.5 nm with Sn compositions from x = 0.000–0.279. Synthetic parameters were explored to control the nucleation and growth as well as the factors that have led to the elimination of undesired metallic impurities. The structural analysis of all nanocrystals suggests the diamond cubic structure typically reported for Ge1-xSnx thin films and nanocrystalline alloys. As-synthesized Ge1-xSnx nanoalloys exhibit high thermal stability and moderate resistance against sintering up to 400–500 °C and are devoid of crystalline and amorphous elemental Sn impurities.

Dye-sensitized solar cells (DSSCs) have attained considerable attention during the last decade because of the potential of becoming a low cost alternative to silicon based solar cells. Electron transport is one of the prominent processes in the cell and it is further a complex process because the transport medium is a mesoporous film. The gaps in the pores are completely filled by an electrolyte with high ionic strength, resulting in electron-ion interactions. Therefore, the electron transport in these so called state-of-the-art systems has a practical limit because of the low electron diffusion coefficient (Dn) in this mesoporous film photoanode. This work focuses on the influence of the advanced core-shell nanoarchitecture geometry on electron transport and also on the influence of electron-ion interactions. In order to achieve the proposed goals, DSSCs based on ordered, highly aligned, 3D radial core-shell Au-TiO2 hybrid nanowire arrays were fabricated, using three different approaches. J-V, IPCE, and EIS characteristics were studied. The efficiency, light scattering and charge transport properties of the core-shell nanowire based devices were compared to TiO2 nanotube as well as TiO2 mesoporous film based DSSCs. The Au nanowires inside the crystalline TiO2 anatase nanoshell provided a direct conduction path from the TiO2 shell to the TCO substrate and improved transport of electrons between the TiO2 and the TCO. The optical effects were studied by IPCE measurement which demonstrated that Au-TiO2 nanowires showed an improved light harvesting efficiency, including at longer wavelengths where the sensitizer has weak absorption. The metal nanostructures could enhance the absorption in DSSCs by either scattering light enabling a longer optical path-length, localized surface plasmon resonance (LSPR) or by near-field coupling between the surface plasmon polariton (SPP) and the dye excited state. Rapid, radial electron collection is of practical significance because it should allow alternate redox shuttles that show relatively fast electron-interception dynamics to be utilized without significant sacrifice of photocurrent. A combination of improved electron transport and enhanced light harvesting capability make Au-TiO2 core-shell nanowire arrays a promising photoanode nanoarchitecture for improving photovoltaic efficiency while minimizing costs by allowing thinner devices that use less material in their construction.

The idea of utilizing nanomaterials in bio-related applications has been extensively practiced during the recent decades. Magnetic nanoparticles (MPs), especially superparamagnetic iron oxide nanoparticles have been demonstrated as promising candidates for biomedicine. A protective coating process with biocompatible materials is commonly performed on MPs to further enhance their colloidal and chemical stability in the physiological environment. Mesoporous hollow silica is another class of important nanomaterials that are extensively studied in drug delivery area for their ability to carry significant amount of guest molecules and release in a controlled manner. In this study, different synthetic approaches that are able to produce hybrid nanomaterials, constituting both mesoporous hollow silica and magnetite nanoparticles, are described. In a two-step approach, pre-synthesized magnetite nanoparticles are either covalently conjugated to the surface of polystyrene beads and coated with silica or embedded/enclosed in the porous shell during a nanosized CaCO3 templated condensation of silica precursors, followed by acid dissolution to generate the hollow structure. It was demonstrated that the hollow interior is able to load large amount of hydrophobic drugs such as ibuprofen while the mesoporous shell is capable of prolonged drug. In order to simplify the fabrication procedure, a novel in-situ method is developed to coat silica surface with magnetite nanoparticles. By refluxing the iron precursor with mesoporous hollow silica nanospheres in polyamine/polyalcohol mixed media, one is able to directly form a high density layer of magnetite nanoparticles on silica surface during the synthesis, leaving reactive amine groups for further surface functionalization such as fluorescence conjugation. This approach provides a convenient synthesis for silica nanostructures with promising potential for drug delivery and multimodal imaging. In addition to nanoparticles, nanowires also benefit the research and development of instruments in clinical diagnosis. Semiconductive nanowires have demonstrated their advantage in the fabrication of lab-on-a-chip devices to detect many charge carrying molecules such as antibody and DNA. In our study, In2O3 and silicon nanowire based field effect transistors were fabricated through bottom-up and top-down approaches, respectively, for ultrasensitive bio- detection of toxins such as ricin. The specific binding and non-specific interaction of nanowires with antibodies were also investigated.

Progress has been made in using human serum albumin nanoparticles (HSAPs) as carrier systems for targeted treatment of cancer. Human serum albumin (HSA), the most abundant human blood protein, can form HSAPs via a desolvation and crosslinking method, with the size of the HSAPs having crucial importance for drug loading and in vivo performance. Gold nanoparticles have also gained medicinal attention due to their ability to absorb near-infrared (NIR) light. These relatively non-toxic particles offer combinational therapy via imaging and photothermal therapy (PPTT) capabilities. A desolvation and crosslinking approach was employed to encapsulate gold nanoparticles (AuNPs), hollow gold nanoshells (AuNSs), and gold nanorods (AuNRs), into efficiently sized HSAPs for future tumor heat ablation via PPTT. The AuNR-HSAPs, AuNP-HSAPs and AuNS-HSAPs had average particle diameters of 222 ± 5, 195 ± 9 and 156 ± 15, respectively. We simultaneously encapsulated AuNRs and the anticancer drug paclitaxel (PAC), forming PAC-AuNR-HSAPs with overall average particle size of 299 ± 6 nm. Loading of paclitaxel into PAC-AuNR-HSAPs reached 3μg PAC/mg HSA. PAC-AuNR-HSAPs experienced photothermal heating of 46 ˚C after 15 minutes of NIR laser exposure; the temperature necessary to cause severe cellular hyperthermia. There was a burst release of paclitaxel up to 188 ng caused by the irradiation session, followed by a temporal drug release. AuNR-HSAPs were tested for ablation of renal cell carcinoma using NIR irradiation in vitro. Particles created with the same amount of AuNRs, but varying HSA (1, 5 or 20 mg) showed overall particle size diameters 409 ± 224, 294 ± 83 and 167 ± 4 nm, respectively. Increasing HSAPs causes more toxicity under non-irradiated treatment conditions: AuNR-HSAPs with 20 mg versus 5 mg HSA caused cell viability of 64.5% versus 87%, respectively. All AuNR-HSAPs batches experienced photothermal heating above 42 ˚C. Coumarin-6, was used to visualize the cellular uptake of AuNR-HSAPs via fluorescence microscopy. Finally, camptothecin (CPT) an antineoplastic agent and BACPT (7-butyl-10-aminocamptothecin) were loaded into HSAPs to combat their aqueous insolubility. BACPT-HSAPs loaded up to 5.25 micrograms BACPT/ mg of HSA. CPT encapsulation could not be determined. BACPT-HSAPs and CPT-HSAPs showed cytotoxicity to human sarcoma cells in vitro.

Abstract Template assisted deposition was used to produce various nanomaterials including simple nanowires, nanorods, multi-segmented metal nanowires, core-shell nanowires, alloy and polymer wires and tubes. Anodized aluminum oxide (AAO) membranes were used as templates for the growth of the various structures using an electrochemical deposition method and also by wetting the porous templates. In the electrochemical deposition method, the pore size of the templates affects the rate of synthesis and the structures of the nanomaterials while in the wetting method, the viscosity and reaction time in the polymer solution influence the structures of the nanomaterials. A conventional two-step anodization procedure was used to synthesize thick AAO templates with porous hexagonal channels at a constant applied voltage and temperature. A maximum thickness of over 180 µm oxide layer could be fabricated using mild anodization at 60 V and 80 V. Compared to conventional mild anodization, these conditions facilitated faster growth of oxide layers with regular pore arrangement. Polyethylene glycol (PEG) containing ferromagnetic nanowires were synthesized using template assisted electrochemical deposition method. During the synthesis, simultaneous deposition of polymer and metal ions resulted nanowires coated with a uniform layer of PEG without interfering with the structure and magnetic properties of the nanowires. PEG-coated Ni nanowires were embedded in polyethylene diacrylate (PEGDA) matrix after the removal of the AAO templates. Comparison of results with and without a magnetic field during embedding showed that the presence of magnetic field supported embedding of nanowire arrays in polymer. Influence of using AAO templates with several pore diameters for the synthesis of bimetallic nanowires were studied by growing Ni-Fe and Ni-Co bi-metallic nanowires. At a constant applied current by using templates with a pore diameters of 60 nm alloy formed while with a pore diameter of 130 nm core-shell nanowires formed. Polyvinylidene fluoride (PVDF) films and nanotubes were synthesized using a solution recrystallization method that favored the formation of piezoelectric β phase thin films. Variation in the concentration of polymer in the mixture solution allowed synthesis of different types of structures such as PVDF composites, nanorods and nanocrystals with tunable morphologies. Keywords: One-dimensional structures, electrodeposition, porous alumina, ferromagnetic nanostructures, magnetic core-shell nanowires, alloys, polymer composite, stimuli-active, PEGDA, azobenzene, and PVDF.

In this work a new material, the conducting polymer-DNA composite, has been reported for the first time due to its promise in micro extraction, transfer, and release of cations under controlled potential conditions by using electrochemically assisted solid phase micro extraction (SPME). The Polypyrrole/DNA composite can be formed easily by oxidation of pyrrole monomers in the presence of chromosomal DNA by electropolymerization. Environmental significant pollutants such as Cd, Pb, Hg, Co, Zn, Cu, and Bi metal ions can be extracted from the aqueous solution and are able to be transferred to another medium defined as the release solution where the metals were detected by anodic stripping voltammetry. Using Cd2+ as a model, this method has been examined to optimize its operational condition. Extraction efficiency and potential interference for this method were studied.

Donor-acceptor conjugated polymers opened a new era for conjugated polymer research due to the abundant selection and combination of different conjugated units. This class of polymers function as semiconductor materials with potential application in plastic consumer electronics. The frontier molecular orbital energies of the polymers are generally determined by the selection of donor and acceptor units in the backbone structure, and their substituents. The side chains attached to the backbone not only affect the solubility of the materials, but also their self-assembly and morphological characteristics, which indirectly govern optoelectronic properties. It is important therefore to consider backbone architectures and the side chains together, to control (opto)-electronic properties for specific applications, while also maintaining solution processability without disrupting solid-state packing. The research presented in this dissertation focuses largely on the side chains: how the bulk and position of side chains affect the (opto)-electronic properties of select donor-acceptor (D-A) conjugated polymers. More precisely the intent is to vary the size and position of branches in the alkyl side chains of donor-acceptor polymers, in the attempt to solubilize poorly soluble polymers, without disrupting self-assembly of the polymer backbones into close p-stacks. After an introductory chapter 1, chapter 2 mainly focuses on the synthesis and structure-property study of polymers with 2,3,5,6-tetrafluorobenzene (TFB) as the acceptor motif and benzo[1,2-b:4,5-b′]dithiophene (BDT) as donor units carrying solubilizing substituents. TFB units were chosen based on previous observations that this acceptor unit imparts particularly poor solubility to various donor-acceptor copolymers. The current study indicates that bulky branches placed close to the polymer backbone could solubilize the PBDTTFB copolymers without altering the absorption profile and oxidation potentials. Optical, wide-angle x-ray diffraction (WAXD) and solubility studies shows that solubility is closely related to branching size and position. As the branch size in increased, the solubility of these polymers undergoes a step-change. The third chapter mainly focuses on the structure-property study of D-A polymers with thienopyrroledione (TPD) as acceptor. Unlike TFB, this acceptor can carry additional side chains that can compete with the space-filling demands of the donor unit side chains. As donor, the rigid BDT unit was compared with 3,3’-dialkoxy-2,2’bithiophene (RO2T2) units which have a similar size, but contain a “swiveling” central σ-bond. Bulkiness of side chains attached to the T2 units should be expected to have a more severe impact, possibly causing the two thiophene units of the T2 units to twist out of plane. It was demonstrated that alkoxy side chains with bulky branches in close proximity to the polymer backbones does not disrupt conjugation in these polymers. The UV-Vis absorption spectra of RO2T2-TPD polymers were red-shifted (more than 120 nm) in comparison to PBDTTPD polymers due to the smaller Eg (energy gap), which might be attributed to the expected higher energy HOMO imparted by the donor unit. The π-π stacking of polymers with BDT units was little affected by the bulky side chains. However, the π-π stacking of polymers with RO2T2 units was much more sensitive to side-chain bulk, with high degree of order and close π-π stacking only if proper local free spacing exists for side-chain interdigitation. Chapter 4 reports efforts to study polymers from the same set of RO2T2 monomers studied in Chapter 3, but without acceptor units that might otherwise drive self-assembly. RO2T2 homopolymers were synthesized via the Grignard metathesis (GRIM) method. Further, copolymers were prepared with RO2T2 units alternating with thiophene, thieno[3,2-b]thiophene or bithiophene. The spectroscopic studies suggest these polymers with bulky side chains exhibit some varying level of backbone conjugation. Somewhat surprisingly, despite an expected decrease in the strength of intermolecular donor-acceptor interactions, the solubilities were in some cases low, but varied with volume fraction of side chains. Further, even for polymers that appear to easily dissolve, aggregation in solution is so extensive as to give ensembles “too large” for characterization by GPC and or solution NMR. Oxidation potentials seem essentially insensitive to any of the structural variables (governed mostly by the backbone RO2T2 units).