The electromagnetic coupling of a microstrip transmission line (MS-TL) to a metamaterial backward wave Negative-Refractive-Index transmission line (NRI-TL) is the primary investigation of this dissertation. The coupling of forward waves in the MS-TL to the backward waves in the NRI-TL results in the formation of complex modes, characterized by simultaneous phase progression and attenuation along the lossless lines. Through network-theoretic considerations, we investigate the properties of these modes in the complex-frequency plane of the Laplace domain to help unravel the confusion that has existed in the literature regarding the independent excitation of a pair of conjugate complex modes. We show that it is possible to arbitrarily suppress one of the modes over a finite bandwidth and completely eliminate it at a discrete set of frequencies using proper source and load impedances. Hence we use conjugate modes with independent amplitudes in our eigenmode expansion when we analyse various coupling configurations between the two types of lines (MS/NRI-TL coupler). We derive approximate closed-form expression for the scattering parameters of the MS/NRI-TL coupler and these are complemented by design charts that allow the synthesis of a wide range of specifications. Moreover, these expressions reveal that such couplers allow for arbitrary backward coupling levels along with very high-isolation when they are made half a guided wavelength long. The MS/NRI-TL coupler offers some interesting applications which we highlight through the design and testing of a 3-dB power splitter, a high-directivity signal monitor and a compact corporate power divider. We have included design, simulation and experimental data for the fabricated prototypes exhibiting good agreement and thereby justifying the theory that has been developed in this work to explain the coupling between a right-handed MS-TL and a left-handed NRI-TL.

The electromagnetic coupling of a microstrip transmission line (MS-TL) to a metamaterial backward wave Negative-Refractive-Index transmission line (NRI-TL) is the primary investigation of this dissertation. The coupling of forward waves in the MS-TL to the backward waves in the NRI-TL results in the formation of complex modes, characterized by simultaneous phase progression and attenuation along the lossless lines. Through network-theoretic considerations, we investigate the properties of these modes in the complex-frequency plane of the Laplace domain to help unravel the confusion that has existed in the literature regarding the independent excitation of a pair of conjugate complex modes. We show that it is possible to arbitrarily suppress one of the modes over a finite bandwidth and completely eliminate it at a discrete set of frequencies using proper source and load impedances. Hence we use conjugate modes with independent amplitudes in our eigenmode expansion when we analyse various coupling configurations between the two types of lines (MS/NRI-TL coupler). We derive approximate closed-form expression for the scattering parameters of the MS/NRI-TL coupler and these are complemented by design charts that allow the synthesis of a wide range of specifications. Moreover, these expressions reveal that such couplers allow for arbitrary backward coupling levels along with very high-isolation when they are made half a guided wavelength long. The MS/NRI-TL coupler offers some interesting applications which we highlight through the design and testing of a 3-dB power splitter, a high-directivity signal monitor and a compact corporate power divider. We have included design, simulation and experimental data for the fabricated prototypes exhibiting good agreement and thereby justifying the theory that has been developed in this work to explain the coupling between a right-handed MS-TL and a left-handed NRI-TL.

Les métamatériaux sont définis comme étant des matériaux artificiels présentant des propriétés exotiques qui modifient la propagation des ondes électromagnétiques. À la fin des années 90, Pendry et al. démontrèrent théoriquement qu'il est possible de générer de tels métamatériaux, grâce à des structures particulières au sein du matériau (le fameux "splitring resonator"). Les métamatériaux sont donc structurés à une échelle inférieure à la longueur d'onde incidente, et décrits par une permittivité et une perméabilité effective. En 2000, Smith et al. fabriquèrent le premier métamatériau mais dans la gamme micro-onde. Les perspectives dans le domaine de l'optique (300800 nm) sont très prometteuses, mais le transfert des technologies utilisées en micro-ondes rencontre des obstacles. Un des défis dans le domaine émergent des métamatériaux est d'assembler à grande échelle des nanoparticules NPs (10-50 nm) en des super-réseaux présentant des propriétés collectives. Des nanostructures tridimensionnelles de matériaux nobles, ayant de fortes réponses plasmoniques, peuvent en effet générer des matériaux aux nouvelles propriétés optiques. Cette thèse fait partie du projet européen METACHEM, dont le but est de fabriquer des métamatériaux dans le domaine de l'infrarouge et du visible, en se basant sur l'utilisation de la nanochimie et de l'assemblage de matériaux. Plus précisément, ce travail de thèse se situe à l'interface entre les groupes de chimie qui synthétisent des nanoparticules en dispersion, et les groupes de caractérisation optique des matériaux. Dans ce travail de thèse, nous utilisons une technique originale la microévaporation basée sur les outils microfluidiques, afin de générer de façon contrôlée des assemblées 3D de nanoparticules (dimensions typiques 1 mm10 m 50 m). / 1-Microevaporation - Microfluidics is the branch of fluid mechanics dedicated to the study of flows in the channel withdimensions between 1 micron and 100 micron. The object of this chapter is to illustrate the basicprinciples and possible applications of microfluidic chip, called microevaporator. In the first part ofthe chapter, we present a detailed description of the physics of microevaporators using analyticalarguments, and describe some applications. In the second part of the chapter, we present theexperimental protocol of engineering of micro evaporator and different type of microfluidics device.2- On-chip microspectroscopy - The object of this chapter is to illustrate a method to measure absorption spectra during theprocess of growth of our materials in our microfluidic tools. The aim is to make an opticalcharacterization of our micro materials and to carry-out a spatio-temporal study of kineticproperties of our dispersion under study. This instrumental chapter presents the theoretical basis !of the method we used.3-Role of colloidal stability in the growth of micromaterials - We used combined microspectroscopy and videomicroscopy to follow the nucleation and growth ofmaterials made of core-shell Ag@SiO2 NPs in micro evaporators.!We evidence that the growth is actually not always possible, and instead precipitation may occurduring the concentration process. This event is governed by the concentration of dispersion in thereservoir and we assume that its origin come from ionic species that are concentrated all togetherwith the NPs and may alter the colloidal stability en route towards high concentration. 4-Microfluidic-induced growth and shape-up of three-dimensional extended arrays of denselypacked nano particles - In this chapter I present in details microfluidic evaporation experiments to engineer various denselypacked 3D arrays of NPs.5-Bulk metamaterials assembled by microfluidic evaporation - In this chapter I introduced the technique we used (microspot ellipsometry) in close collaborationswith V.Kravets and A.Grigorenko(University of Manchester) and with A.Aradian, P.Barois, A.Baron,K.Ehrhardt(CRPP, Pessac) to characterized the solids made of densely packed NPs. I describe theconstraints that emerge from the coupling between the small size of our materials and the opticalrequirements, the analysis and interpretation of the ellipsometry experiments show that for thematerial with high volume fraction of metal exists the strong electrical coupling between the NPsand the materials display an extremely high refraction index in the near infra-red regime.

Ce manuscrit s'inscrit dans le contexte du contrôle de la propagation des plasmons de surface. A cet effet, des nanostructures diélectriques et métalliques ont été conçues et caractérisées par microscopie à champ de fuite dans les espaces réels et réciproques. La manipulation des plasmons de surface à l'aide de lentilles diélectriques et d' éléments à gradient d'indice est présentée, et la réfraction négative, la direction et l'auto-collimation des plasmons de surface dans des cristaux plasmoniques à une ou deux dimensions sont démontrées. Ces résultats ont été utilisés pour le guidage de nanoparticules à l'aide de forces optiques, ainsi que pour deux méthodes permettant de renforcer le facteur de mérite de sondes plasmoniques de variation d'indice de réfraction, basées l' une sur les résonances de Fano naturelles de la microscopie à champ de fuite, et pour la seconde sur les structures des bandes plasmoniques anisotropes. / In this thesis devices for controlling the flow of surface plasmon polaritons are described. Dielectric and metallic nanostructures were designed for this purpose, and characterized by leakage radiation microscopy in real and in reciprocal spaces. Manipulation of surface plasmons by dielectric lenses and gradient index elements is presented, and negative refraction, steering and self-collimation of surface plasmons in one- and two-dimensional plasmonic crystals is demonstrated. The achieved degree of control was applied for routing of nanoparticles by optical forces, as well as for two methods of enhancing the figures of merit of plasmonic refractive index sensors, based on the one hand on Fano resonances natural to leakage radiation microscopy, and on the other hand on anisotropie plasmonic bandstructures.

Le travail de cette thèse est en rapport avec les métamatériaux et ses applications. Tout d’abord, un état de l’art est dressé en présentant leur évolution depuis leur apparition en 19ème siècle jusqu’au nos jours. Les notions sur les milieux chirale, bi-anisotrope, cristaux photoniques et quelques applications dans ces milieux sont données. Ensuite, nous présentons les équations classiques de Maxwell dans les milieux complexes. L’effet bi-anisotrope dans les métamatériaux est ensuite validé par l’extraction des paramètres caractéristiques du matériau main gauche (LHM). La validation a été faite en utilisant deux types différents du résonateur avec inclusion (SRR). Les métamatériaux sont également étudiés comme des cristaux photoniques quand les dimensions utilisées sont de l’ordre de la longueur d’onde correspondant.De plus, les résonateurs SRR et multi-SRR sont analysés du point de vue analytique et électromagnétique afin d’extraire leur fréquence de résonance. Par conséquent, ces composants peuvent être introduits dans différents types de conception; La surface conductrice magnétique artificielle (AMC) illustre un cas explicite et efficace de ces derniers. Une antenne dipôle, placée sur cette surface à la place d’un plan de masse conventionnel, a été étudiée comme une application des métamatériaux. Les résultats relatifs sur la directivité, le gain et le coefficient de réflexion montrent une nette amélioration. Une antenne multi-bandes, comme une autre application des métamatériaux, a également été conçue et simulée. Le résonateur SRR est inséré dans l’antenne de départ afin de créer une autre résonance, et par conséquent une autre bande est ainsi créée. / The work in this thesis deals with metamaterials, its components and applications. A historical overview about these materials, features and researches in the domain are presented. Chiral media, binaisotropic materials and photonic crystals are also studied in order to visualize physics behind metamaterials.Electromagnetic properties in complex media are widely investigated. Starting from Maxwell’s equations, bi-anisotropic materials and their effect are deeply analyzed whereas two types of Split Ring Resonator (SRR) are treated to determine constitutive parameters of Left Handed Materials (LHM). The metamaterials are also studied as photonic crystals since the effective medium approach is not applicable when the dimensions of the inclusions tend to the operating wavelength.Moreover, SRRs and Multi SRRs are synthesized analytically and electromagnetically in order to extract their resonant frequencies. Consequently, these components could be introduced in any design; Artificial Magnetic Conductor (AMC) surface is an efficient case. Thus, a low profile antenna positioned over such surface is examined as an application of metamaterials. The results of directivity, gain and reflection coefficient are of great importance and affirm the employing of metamaterials in such applications. A dual band PCB antenna, as another application of metamaterials, is designed and simulated. The SRR element studied in the previous chapters is used as the trap which inserted in the arm of the antenna in order to create another resonance, and consequently another band is created.

Vanadium oxides are being used as the thermal sensing layer because of their applications in infrared detectors. They have high temperature coefficient of resistance, favorable electrical resistance and compatibility with the MEMS technology. Of all oxides of vanadium, only vanadium dioxide (VO2)has been highly investigated as it shows first order transition (semiconducting to metal transition-SMT)at 68 oC. First order transition is understood as the sharp change in the electrical resistance. The change in resistivity in this case is of the order of 105 over a temperature change of 0.1 oC at 68 oC in a single crystal. Doping vanadium oxides with elements like Mo and W reduce the transition temperature. This is very important for room temperature electrical and optical detection. Though most of the research groups subscribe to PLD, cost-effective methods with large area deposition are major focus of this research. Hence for synthesizing VO2 in bulk and thin films, Solution Combustion Synthesis (SCS), Ultrasonic Nebulized Spray Pyrolysis of Aqueous Combustion Mixture (UNSPACM) Chemical vapour deposition (CVD)and microwave are explored. Synthesis of doped VO2 films in CVD has not been done extensively to yield optical quality thin films. Chapter I surveys the use of phase transition in oxides system for a variety of practical applications. In particular, Vanadium dioxide (VO2) is chosen as it is found to be very useful for infrared and metamaterials based applications. VO2 is known for its first-order semiconducting to metallic transition (SMT). This chapter attempts to explain the influence of processing, doping, annealing, etc on the SMT characteristics. Important aspects such as the idea of hysteresis in VO2 and similarity to martensitic transformation are discussed. The scope and objectives of the thesis are discussed here. Chapter II explains in detail the materials and methods used to synthesize VO2 both in bulk and in thin lm form and methods used to study their characteristics. Brief description on the principle and the working of the home-built experimental set up needed for this study is elicited. In chapter III, attempts were made to understand the phase stability of VO2 and the evolution of crystal structures during the phase transition. VO2 crystallizes in P21/c space group at room temperatures with lattice parameters a=5.752 Ab=4.526 Ac=5.382 Aα=90 β=122.60 γ=90 . Precise control of synthesis parameters is required in stabilizing pure phase in bulk as well as thin lm form. This study focuses on the novel large scale two step synthesis of VO2 using Solution Combustion Synthesis. This involves synthesis of product utilizing redox reaction between metal nitrate and suitable fuel. Generally the products are nanocrystalline in nature due to self-propagation of the exothermic combustion reaction. First step involved the synthesis of V2O5 by combustion reaction between Vanadyl nitrate and urea. In the second step, the as-synthesized V2O5 has been reduced by a novel reduction technique to form monophasic VO2. The presence of competing phases like M1, M2, M3 and R are investigated by XRD, Raman spectroscopy, DSC, Optical and high temperature X-ray diffraction. Chapter IV deals with the reduction in phase transition temperature by doping the SCS synthesized VO2 with W and Mo. Effect of doping on the transition temperature was studied using differential scanning calorimetry (DSC) in both W and Mo. Electrical characteristics of Mo doped VO2 and Optical characteristics of the W-doped VO2 were also studied using four probe resistivity measurements and UV-VIS Spectroscopy respectively. W addition was found to be more effective in reducing the phase transition temperature. To understand further more on the W addition, X-ray photo-electron spectroscopy measurements were performed. W-addition alters the V4+-V4+ bonding and with W addition it is observed that V was present in V3+state. W was present in W6+ state. The addition of W to VO2 introduces more electrons to the systems and disturbs the V4+-V4+ thus reducing the phase transition temperature of VO2. Chapter V describes the large scale, large area deposition of thin films of VO2 by a cost effective method. A novel technique to deposit vanadium dioxide thin films namely, UNSPACM is developed. This simple two-step process involves synthesis of a V2O5 lm on an LaAlO3(LAO) substrate followed by a controlled reduction to form single phase VO2. The formation of M1 phase (P21/c) is confirmed by Raman spectroscopic studies. A thermally activated metal{insulator transition (MIT) was observed at 61 oC, where the resistivity changes by four orders of magnitude. The infrared spectra also show a dramatic change in reflectance from 13% to over 90% in the wavelength range of 7-15 m. This indicates the suitability of the films for optical switching applications at infrared frequencies. A trilayer metamaterial absorber, composed of a metal structure/dielectric spacer/vanadium dioxide (VO2) ground plane, is shown to switch reversibly between reflective and absorptive states as a function of temperature. The VO2 lm, which changes its conductivity by four orders of magnitude across an insulator{metal transition, enables the switching by forming a resonant absorptive structure at high temperatures while being inactive at low temperatures. The fabricated metamaterial shows a modulation of the reflectivity levels of 58% at a frequency of 22.5 THz and 57% at a frequency of 34.5 THz. Chapter VI explains the W doped VO2 thin films synthesized by UN-SPACM. Morphology of the thin films was found to be consisting of globular and porous nanoparticles having size 20 nm. Transition temperature decreased with the addition of W. 1.8 at. %W doping in VO2 transition temperature has reduced upto 25 oC. It is noted that W-doping in the pro-cess of reducing the transition temperature, alters the local structure and also increases room temperature carrier concentration. The presence of W, as was seen in Chapter IV, altered V4+-V4+ bonds and introduced V3+. W was found to be in W6+ state suggesting W addition increased the carrier concentration. Hall Effect measurements suggested the increased carrier con-centration. The roughness of the synthesized films were very high for them to be of de-vice quality, despite encouraging results obtained by electrical measurements. Hence in order to further improve the smoothness and thereby the optical quality of thin films, Chemical Vapour Deposition (CVD) is employed. Chapter VII outlines the effect of processing parameters and post pro-cessing annealing on the semiconductor-metallic transition of VO2. Here in this chapter, the influence of substrate temperature on the SMT properties of VO2 is explored. At different substrate temperatures, the percentage of phase fraction of V in V3+, 4+ and V5+ differed. Besides, the morphology also varied with substrate temperatures. Similarly it is observed that with annealing the VO2 film deposited on glass substrates, SMT properties enhanced which was attributed to filling out of oxygen vacancies. Si based substrates and non-Si based substrates were used for depositing VO2 thin films by CVD. Their temperature coefficient of resistance and SMT properties were studied in order to understand their potential in bolometer and thermal to optical valve based applications. Chapter VIII involves the study of VO2 thin films for thermal to optical valves. ITO coated glass substrates were used for the purpose. Thin films were deposited by both UNSPACM and CVD. It was observed that the reflectivity pro les of the films synthesized by the above said methods were very different. Hence in the process of understanding the huge difference in the reflectivity pro les, classical harmonic oscillator, Lorentzian model was employed to t the experimental data at room temperature whereas Drude-Lorentzian model was used to t the data at higher temperature (at 100 oC- after transition). With this fitting plasma frequencies of the CVD films were calculated. It was observed that defect chemistry of films synthesized by these methods were different. In order to further improve the smoothness of the films, microwave method was proposed in Chapter IX. The preliminary results showed the presence of uniform spheres and 3 D hierarchical structures of VO2 consisting of nanorods. This was extended to deposit VO2 thin films on ITO. DSC and Infrared reflectance pro le of VO2 nanopowder suggested the phase transition. Chapter X summarizes the work done for the thesis and provides insights to the applications and to the future work. The work reported in this thesis has been carried out by the candidate as part of the Ph.D.program. She hopes that this would constitute a worth-while contribution towards development of VO2 thin film technology and its challenges for reliable infrared device applications.

The widespread adoption of photonic circuits requires the economics of volume manufacturing offered by integration technology. A Complementary Metal-Oxide Semiconductor compatible silicon material platform is particularly attractive because it leverages the huge investment that has been made in silicon electronics and its high index contrast enables tight confinement of light which decreases component footprint and energy consumption. Nevertheless, there remain challenges to the development of photonic integrated circuits. Although the density of integration is advancing steady and the integration of the principal components – waveguides, optical sources and amplifiers, modulators, and photodetectors – have all been demonstrated, the integration density is low and the device library far from complete. The integration density is low primarily because of the difficulty of confining light in structures small compared to the wavelength which measured in micrometers. The device library is incomplete because of the immaturity of hybridisation on silicon of other materials required by active devices such as III-V semiconductor alloys and ferroelectric oxides and the difficulty of controlling the coupling of light between disparate material platforms. Metamaterials are nanocomposite materials which have optical properties not readily found in Nature that are defined as much by their geometry as their constituent materials. This offers the prospect of the engineering of materials to achieve integrated components with enhanced functionality. Metamaterials are a class of photonic crystals includes subwavelength grating waveguides, which have already provided breakthroughs in component performance yet require a simpler fabrication process compatible with current minimum feature size limitations. The research reported in this PhD thesis advances our understanding of the structure-property relations of key planar light circuit components and the metamaterial engineering of these properties. The analysis and simulation of components featuring structures that are only just subwavelength is complicated and consumes large computer resources especially when a three dimensional analysis of components structured over a scale larger than the wavelength is desired. This obstructs the iterative design-simulate cycle. An abstraction is required that summarises the properties of the metamaterial pertinent to the larger scale while neglecting the microscopic detail. That abstraction is known as homogenisation. It is possible to extend homogenisation from the long-wavelength limit up to the Bragg resonance (band edge). It is found that a metamaterial waveguide is accurately modeled as a continuous medium waveguide provided proper account is taken of the emergent properties of the homogenised metamaterial. A homogenised subwavelength grating waveguide structure behaves as a strongly anisotropic and spatially dispersive material with a c-axis normal to the layers of a one dimensional multi-layer structure (Kronig-Penney) or along the axis of uniformity for a two dimensional photonic crystal in three dimensional structure. Issues with boundary effects in the near Bragg resonance subwavelength are avoided either by ensuring the averaging is over an extensive path parallel to boundary or the sharp boundary is removed by graded structures. A procedure is described that enables the local homogenised index of a graded structure to be determined. These finding are confirmed by simulations and experiments on test circuits composed of Mach-Zehnder interferometers and individual components composed of regular nanostructured waveguide segments with different lengths and widths; and graded adiabatic waveguide tapers. The test chip included Lüneburg micro-lenses, which have application to Fourier optics on a chip. The measured loss of each lens is 0.72 dB. Photonic integrated circuits featuring a network of waveguides, modulators and couplers are important to applications in RF photonics, optical communications and quantum optics. Modal phase error is one of the significant limitations to the scaling of multimode interference coupler port dimension. Multimode interference couplers rely on the Talbot effect and offer the best in-class performance. Anisotropy helps reduce the Talbot length but temporal and spatial dispersion is necessary to control the modal phase error and wavelength dependence of the Talbot length. The Talbot effect in a Kronig-Penny metamaterial is analysed. It is shown that the metamaterial may be engineered to provide a close approximation to the parabolic dispersion relation required by the Talbot effect for perfect imaging. These findings are then applied to the multimode region and access waveguide tapers of a multi-slotted waveguide multimode interference coupler with slots either in the transverse direction or longitudinal direction. A novel polarisation beam splitter exploiting the anisotropy provided by a longitudinally slotted structure is demonstrated by simulation. The thesis describes the design, verification by simulation and layout of a photonic integrated circuit containing metamaterial waveguide test structures. The test and measurement of the fabricated chip and the analysis of the data is described in detail. The experimental results show good agreement with the theory, with the expected errors due to fabrication process limitations. From the Scanning Electron Microscope images and the measurements, it is clear that at the boundary of the minimum feature size limit, the error increases but still the devices can function.

<p dir="ltr">Structural instability, traditionally deemed undesirable in engineering, can be leveraged for beneficial outcomes through intelligent design. One notable instance is elastic buckling, often leading to structures with two stable equilibria (bistable). Connecting bistable elements to form multistable mechanical metamaterials can enable the discretization and offer tunability of mechanical properties without the need for continuous energy input.<i> </i>In this work, we study the physics of these multistable metamaterials and utilize their state and property alterations along with snap-through instabilities resulting from state change for engineering applications. These materials hold potential for diverse applications, including mechanical and thermo-mechanical defrosting, energy absorption, energy harvesting, and mechanical storage and computation.</p><p dir="ltr">Focusing on defrosting, we find that the energy-efficient mechanical method using embedded bistable structures in heat exchanger fins significantly outperforms the thermal methods. The combination of manufacturing methods, material choice, boundary conditions, and actuation methodologies is systematically investigated to enhance defrosting performance. A purely mechanical strategy is effective against solid, glaze-like ice accumulations; however, performance is substantially diminished for low-density frost. To address this limitation, we study frost formation on the angular shape morphing fins and subsequently introduce a thermo-mechanical defrosting strategy. This hybrid approach focuses on the partial phase transition of low-density frost to solid ice through thermal methods, followed by mechanical defrosting. We experimentally validate this approach on a multistable heat exchanger fin pack.</p><p dir="ltr">Recent advancements have led to a new paradigm of reusable energy-absorbing materials, known as Phase Transforming Cellular Materials (PXCM) that utilize multiple negative stiffness elements connected in series. We explore the feasibility of this multistable metamaterial as frequency up-conversion material and utilize these phase transformations for energy harvesting. We experimentally demonstrate the energy-harvesting capabilities of a phase-transforming unit-cell-spring configuration and investigate the potential of multicell PXCM as an energy harvesting material.</p><p dir="ltr">The evolution towards intelligent matter, or physical intelligence, in the context of mechanical metamaterials can be characterized into four distinct stages: static, responsive, adaptive, and intelligent mechanical metamaterials. In the pursuit of designing intelligent mechanical metamaterials, there has been a resurgence in the field of mechanical computing. We utilize multistable metamaterials to develop mechanical storage systems that encode memory via bistable state changes and decode it through a global stiffness readout. We establish upper bounds for maximum memory capacity in elastic bit blocks and propose an optimal stiffness distribution for unique and identifiable global states. Through both parallel and series configurations, we realize various logic gates, thereby enabling in-memory computation. We further extend this framework by incorporating viscoelastic mechano-bits, which mimic the decay of neuronal action potentials. This allows for temporal stiffness modulation and results in increased memory storage via non-abelian behavior, for which we define a fundamental time limit of detectability. Additionally, we investigate information entropy in both elastic and viscoelastic systems, showing that temporal neural coding schemes can extend the system’s entropy beyond conventional limits. This is experimentally validated and shown to not only enhance memory storage but also augment computational capabilities.</p><p dir="ltr">The work in this thesis establishes multistability as a key design principle for developing responsive, adaptive, and intelligent materials, opening new avenues for future research in the field of multistable metamaterials.</p>

[ES] La tomografía por difracción surge para mejorar las técnicas de imagen al considerar la naturaleza ondulatoria de la luz. Mientras que los primeros sistemas de imagen médica se basaban únicamente en fuentes sin difracción, este enfoque consigue mejorar la reconstrucción del índice de refracción de los objetos, lo que permite, por ejemplo, el estudio de estructuras subcelulares. Del mismo modo, la demanda de redes de telecomunicaciones cada vez más rápidas y seguras ha propiciado la aparición de la fotónica. Hace dos décadas, la combinación de estos dos campos dio lugar a los primeros sistemas de tomografía por difracción óptica (ODT), los cuáles han evolucionado rápidamente durante este siglo. En esta tesis, presentamos dos nuevas aplicaciones de la ODT. La primera está relacionada con el concepto del microscopio tomográfico de fase (TPM), una versión de la ODT que permite el estudio de células aisladas, con muchas aplicaciones biomédicas, como el diagnóstico y la prognosis del cáncer. Sin embargo, los sistemas TPM actuales son caros, pesados y complejos. Para resolver estos problemas, proponemos el concepto de TPM en chip. Con este fin, diseñamos una hoja de ruta hacia el primer dispositivo tomográfico integrado en el marco de la tecnología lab-on-a-chip (LoC), y desarrollamos los primeros pasos para ello: 1) Hasta ahora, sólo se han utilizado detectores planos para obtener los mapas de índice de refracción de los objetos estudiados en TPM, basados en la detección del campo difractado hacia delante. Sin embargo, los principios físicos fundamentales indican que medir también el campo difractado hacia detrás debería mejorar la resolución de las imágenes. Además, un detector plano no es la configuración óptima para el TPM en chip. En esta línea, hemos explorado la posibilidad de usar detectores circulares en este escenario, como una técnica más adecuada para las configuraciones en chip, demostrando al mismo tiempo que este enfoque proporciona una mejor resolución que el lineal. 2) Proponemos un esquema de TPM en chip basado en el uso de nanoantenas dieléctricas como fuente de luz y píxeles detectores ODT, y caracterizamos experimentalmente su comportamiento mediante microscopía óptica de campo cercano. En cuanto a la segunda aplicación, estudiamos el potencial de la ODT como nuevo paradigma en la detección de capas de invisibilidad realistas, una de las aplicaciones más importantes de los metamateriales. Hasta ahora, el scattering cross section (SCS) se ha utilizado como modelo de referencia para diseñar y observar la eficacia de estos dispositivos para ocultar objetos. En nuestro estudio, demostramos que la ODT puede detectar las capas de invisibilidad prácticas con una sensibilidad superior a la que ofrece el SCS, incluso a las frecuencias de trabajo óptimas. Además, es posible obtener una imagen representativa del tamaño y la forma de la capa, revelando claramente su existencia. Finalmente, se discuten las conclusiones extraídas de los resultados obtenidos. Además, se detallan las futuras líneas de trabajo para abordar los retos que no se han completado en esta tesis doctoral. / [CA] La tomografia per difracció sorgeix per millorar les tècniques d'imatge anteriors en considerar la naturalesa ondulatòria de la llum. Mentre que els primers sistemes d'imatge mèdica es basaven únicament en fonts sense difracció, aquest enfocament aconsegueix millorar la reconstrucció de l'índex de refracció dels objectes, la qual cosa permet, per exemple, l'estudi d'estructures subcelulars. De la mateixa manera, la demanda de xarxes de telecomunicacions cada vegada més ràpides i segures ha propiciat l'aparició de la fotònica. Fa dues dècades, la combinació d'aquests dos camps va portar als primers sistemes de tomografia per difracció òptica (ODT), els quals han evolucionat ràpidament durant aquest segle. En aquesta tesi, presentem dues noves aplicacions de la ODT. La primera està relacionada amb el concepte del microscopi tomogràfic de fase (TPM), una versió de la ODT que permet l'estudi de cèl·lules aïllades, amb moltes aplicacions en biomedicina, com el diagnòstic i prognosi del càncer. No obstant això, els sistemes TPM actuals són cars, pesats i complexos. Per resoldre aquests problemes, proposem el concepte de TPM en xip. Per fer-ho, dissenyem un full de ruta cap al primer dispositiu tomogràfic integrat en el marc de la tecnologia lab-on-a-chip (LoC), i desenvolupem els primers passos a aquest efecte: 1) Fins ara, només s'han utilitzat detectors plans per a obtindre els mapes d'índex de refracció dels objectes estudiats en TPM, basats en la detecció del camp difractat cap avant. No obstant això, els principis físics fonamentals indiquen que mesurar també el camp difractat cap endarrere hauria de millorar la resolució de les imatges. A més, un detector pla no és la configuració òptima per al TPM en xip. En aquesta línia, hem explorat la possibilitat d'usar detectors circulars en aquest escenari, com una tècnica més adequada per a les configuracions en xip, demostrant al mateix temps que aquest enfocament proporciona una millor resolució que el lineal. 2) Proposem un esquema de TPM en xip basat en l'ús de nanoantenes dielèctriques com a font de llum i píxels detectors ODT, i caracteritzem experimentalment el seu comportament en camp pròxim mitjançant microscòpia òptica de camp pròxim. Pel que fa a la segona aplicació, estudiem el potencial de la ODT com a nou paradigma en la detecció de capes d'invisibilitat realistes, una de les aplicacions més importants dels metamaterials. Fins ara, el scattering cross section (SCS) s'ha utilitzat com a model de referència per a dissenyar i observar l'eficàcia d'aquests dispositius per a ocultar objectes. En el nostre estudi, vam demostrar que la ODT pot detectar les capes d'invisibilitat pràctiques amb una sensibilitat superior a la que ofereix el SCS, fins i tot a les freqüències de treball òptimes. A més, és possible obtindre una imatge representativa de la grandària i la forma de la capa, revelant clarament la seua existència. Finalment, es discuteixen les conclusions extretes dels resultats obtinguts i es detallen les futures línies de treball per a abordar els reptes que no s'han completat en aquesta tesi doctoral. / [EN] Diffraction Tomography arises to improve previous imaging techniques by considering the wave nature of light. Whereas the first medical imaging systems relied only on non-diffracting sources, this approach results in an enhanced reconstruction of the object's refractive index distribution, allowing, for example, the study of subcellular structures. Likewise, the demand for increasingly faster and secure telecommunication networks led to the advent of photonics. Two decades ago, the combination of these two fields gave rise to the first optical diffraction tomography (ODT) systems, which have rapidly evolved during this century. In this thesis, we present two novel applications of ODT. The first one is related to the concept of tomographic phase microscopy (TPM), a version of ODT that enables the study of isolated cells, with many applications in biomedicine, such as the diagnosis and prognosis of cancer. Nevertheless, current TPM systems are expensive, heavy, and cumbersome. To solve these issues we propose the concept of on-chip TPM. For this purpose, we design a roadmap towards the first integrated tomographic device in the frame of lab-on-a-chip (LoC) technology and develop the first steps to this end: 1) Until now, only flat detectors have been used to obtain the refractive index maps of the objects studied in TPM, based on the detection of the forward scattering. However, fundamental physical principles indicate that measuring also the backscattered field should improve the resolution of the images. Moreover, a flat detector is not the optimal configuration for on-chip TPM. In this vein, we have explored the possibility of using circular detectors in this scenario as a more suitable technique for on-chip configurations, demonstrating at the same time that this approach provides a better resolution than the linear one. 2) We propose a TPM on-chip scheme based on the use of dielectric nanoantennas as the ODT light source and detector pixels, and experimentally characterize their near-field behavior via scanning near-field optical microscopy. As for the second application, we study the potential of ODT as a new paradigm in the detection of realistic invisibility cloaks, one of the most important applications of metamaterials. Up to now, the scattering cross section (SCS) has been used as the gold standard to design and observe the effectiveness of these devices in hiding objects. In our study, we show that ODT can detect practical invisibility cloaks with a higher sensitivity than that offered by the SCS, even at the optimal working frequencies. Moreover, it is possible to obtain an image depicting the size and shape of the cloak, clearly revealing their existence. Finally, the conclusions drawn from the obtained results are discussed. In addition, future lines of action to address the challenges that have not been completed in this doctoral thesis are detailed. / Díaz Fernández, FJ. (2021). Novel Applications of Optical Diffraction Tomography: On-chip Microscopy and Detection of Invisibility Cloaks [Tesis doctoral]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/180125 / TESIS