<p>Denna uppsats undersöker om det kan finnas behov att ändra något i grundutbildningen för att de värnpliktiga i svenska flottan skall vara bättre förberedda för att rekryteras till de marina insatsstyrkorna. Det undersöks också huruvida det finns behov att förändra sättet att rekrytera personal till de marina insatsstyrkorna. För att belysa hur väl systemet fungerar som det ser ut idag har en fallstudie på den svenska marina missionen ML i Libanon år 2006-2007 gjorts. Där presenteras erfarenheter från missionen som sedan analyseras med hjälp av delar av det undervisningsmaterial som används under grundutbildningen, GU.</p><p>Av undersökningen har det framkommit att förändringar kan göras i grundutbildningen för att förbereda de värnpliktiga bättre. Ett exempel på förslag som kommit fram är att i större utsträckning implementera internationella reglementen och tillvägagångssätt under grundutbildningen. Förslag på förändringar som kan göras i sättet att rekrytera har också framkommit. Ett exempel på ett sådant förslag är att vid rekrytering testa individens fysiologiska lämplighet likt det sätt som flygvapnet testar sina blivande flygförare.</p> / <p>Basic training to be recruited to the naval rapid reaction forces.</p><p>This paper examines if there might be a need of change in the basic training so that the conscripts in the Swedish navy will be better prepared to be recruited to the naval rapid reaction forces. It also examines if the way to recruit personnel to the naval rapid reaction forces needs to be changed. To show how well the system, as it is today, works, a case study have been made on the Swedish naval mission, ML, in Lebanon during 2006-2007. It presents experiences from the mission that later has been analyzed with the help of parts of the educational material that is used in the basic training.</p><p>By this research it has emerged that changes could be made in the basic training to better prepare the conscripts. One example of the suggestions that has evolved is that to a greater extent involve international regulations and procedures in the basic training. Suggestions to change the way of recruiting personnel has also evolved and one example of such a suggestion is that the recruiting process could include a test where the person’s physiological suitability is being tested. A test similar to the one the Air force let’s you do before becoming a pilot.</p>

Denna uppsats undersöker om det kan finnas behov att ändra något i grundutbildningen för att de värnpliktiga i svenska flottan skall vara bättre förberedda för att rekryteras till de marina insatsstyrkorna. Det undersöks också huruvida det finns behov att förändra sättet att rekrytera personal till de marina insatsstyrkorna. För att belysa hur väl systemet fungerar som det ser ut idag har en fallstudie på den svenska marina missionen ML i Libanon år 2006-2007 gjorts. Där presenteras erfarenheter från missionen som sedan analyseras med hjälp av delar av det undervisningsmaterial som används under grundutbildningen, GU. Av undersökningen har det framkommit att förändringar kan göras i grundutbildningen för att förbereda de värnpliktiga bättre. Ett exempel på förslag som kommit fram är att i större utsträckning implementera internationella reglementen och tillvägagångssätt under grundutbildningen. Förslag på förändringar som kan göras i sättet att rekrytera har också framkommit. Ett exempel på ett sådant förslag är att vid rekrytering testa individens fysiologiska lämplighet likt det sätt som flygvapnet testar sina blivande flygförare. / Basic training to be recruited to the naval rapid reaction forces. This paper examines if there might be a need of change in the basic training so that the conscripts in the Swedish navy will be better prepared to be recruited to the naval rapid reaction forces. It also examines if the way to recruit personnel to the naval rapid reaction forces needs to be changed. To show how well the system, as it is today, works, a case study have been made on the Swedish naval mission, ML, in Lebanon during 2006-2007. It presents experiences from the mission that later has been analyzed with the help of parts of the educational material that is used in the basic training. By this research it has emerged that changes could be made in the basic training to better prepare the conscripts. One example of the suggestions that has evolved is that to a greater extent involve international regulations and procedures in the basic training. Suggestions to change the way of recruiting personnel has also evolved and one example of such a suggestion is that the recruiting process could include a test where the person’s physiological suitability is being tested. A test similar to the one the Air force let’s you do before becoming a pilot.

Grâce à leur capacité de faire face à la sélectivité fréquentielle des canaux de transmission, les modulations multi-porteuses (MC) attirent de plus en plus d’attention. De nos jours, la modulation OFDM avec le préfixe cyclique (CP) est la plus utilisée, et cela grâce à sa simplicité et à sa robustesse. Cependant, la technique CP-OFDM présente une perte dans l’efficacité spectrale à cause de l’introduction du CP puisqu’il contient des informations redondantes. De plus, la réponse rectangulaire du filtre de mise en forme utilisé en OFDM a une mauvaise localisation fréquentielle. Afin de surmonter ces inconvénients, la modulation multi-porteuse à base des bancs de filtres (FBMC) a été proposée en tant qu’une approche alternative à la modulation OFDM. En effet, on n’a pas besoin d’insérer un intervalle de garde, tel que le CP, dans la modulation FBMC. D’autre part, la bonne localisation fréquentielle de la réponse du filtre de mise en forme permet un meilleur contrôle de la radiation hors-bande du système. Dans la littérature, on trouve plusieurs types de la modulations FBMC basés sur différentes structures. Dans cette thèse, nous ne nous intéressons que sur le schéma de Saltzberg appelé OFDM/OQAM ou FBMC/OQAM. Dans ce schéma, les symboles envoyés sur chaque sous-porteuse sont tirés d’une constellation PAM réelle, et les symboles réels sont envoyés à une cadence de 2/T . La condition d’orthogonalité est réduite sur l’ensemble des réels uniquement. En conséquence, le symbole démodulé et égalisé est infecté par un terme d’interférence purement imaginaire. Ce terme d’interférence est une combinaison linaire des symboles transmis dans le voisinage du symbole concerné. La présence de cette interférence inhérente cause des difficultés de détection dans certains schéma multi-antennes (MIMO).L’objectif de cette thèse est d’étudier l’association de la modulation FBMC aux techniques MIMO, à savoir le multiplexage spatiale avec détection de maximum de vraisemblance (ML). Dans un premier temps, nous proposons d’analyser différentes techniques d’annulation d’interférence que nous adaptons au contexte de MIMO-FBMC. Nous montrons que, dans certains cas, nous pouvons bien retirer l’interférence et appliquer la détection ML. Ensuite, nous proposons d’apporter une légère modification dans la modulation FBMC en transmettant des symbole QAM complexes. Évidement, cela brise la condition d’orthogonalité mais nous montrons qu’ainsi la puissance d’interférence sera considérablement réduite. Enfin, nous introduisons un nouveau schéma basé sur la modulation FBMC. Ce schéma, que nous avons baptisé FFT-FBMC, transforme le modèle du système à un modèle équivalent à celui de l’OFDM. Ainsi, n’importe quelle technique multi-antennes pourra être appliquée sans aucune difficulté. D’abord, nous développons le système FFT-FBMC dans un contexte SISO, et puis nous évaluons ces performances dans le contexte MIMO. / Multicarrier (MC) Modulation attracts a lot of attention for high speed wireless transmissions because of its capability to cope with frequency selective fading channels turning the wideband transmission link into several narrowband subchannels whose equalization, in some situations, can be performed independently and in a simple manner. Nowadays, orthogonal frequency division multiplexing (OFDM) with the cyclic prefix (CP) insertion is the most widespread modulation among all MC modulations, and this thanks to its simplicity and its robustness against multipath fading using the cyclic prefix. Systems or standards such as ADSL or IEEE802.11a have already implemented the CP-OFDM modulation. Other standards like IEEE802.11n combine CP-OFDM and multiple-input multiple-output (MIMO) in order to increase the bit rate and to provide a better use of the channel spatial diversity. Nevertheless, CP-OFDM technique causes a loss of spectral efficiency due to the CP as it contains redundant information. Moreover, the rectangular prototype filter used in CP-OFDM has a poor frequency localization. This poor frequency localization makes it difficult for CP-OFDM systems to respect stringent specifications of spectrum masks.To overcome these drawbacks, filter-bank multicarrier (FBMC) was proposed as an alternative approach to CP-OFDM. Indeed, FBMC does not need any CP, and it furthermore offers the possibility to use different time-frequency well-localized prototype filters which allow much better control of the out-of-band emission. In the literature we find several FBMC systems based on different structures. In this thesis, we focus on the Saltzberg’s scheme called OFDM/OQAM (or FBMC/OQAM). The orthogonality constraint for FBMC/OQAM is relaxed being limited only to the real field while for OFDM it has to be satisfied in the complex field. Consequently, one of the characteristics of FBMC/OQAM is that the demodulated transmitted symbols are accompanied by interference terms caused by the neighboring transmitted data in time-frequency domain. The presence of this interference is an issue for some MIMO schemes and until today their combination with FBMC remains an open problem.The aim of this thesis is to study the combination between FBMC and MIMO techniques, namely spatial multiplexing with ML detection. In the first part, we propose to analyze different intersymbol interference (ISI) cancellation techniques that we adapt to the FBMC/OQAM with MIMO context. We show that, in some cases, we can cope with the presence of the inherent FBMC interference and overcome the difficulties of performing ML detection in spatial multiplexing with FBMC/OQAM. After that, we propose a modification in the conventional FBMC/OQAM modulation by transmitting complex QAM symbols instead of OQAM ones. This proposal allows to reduce considerably the inherent interference but at the expense of the orthogonality condition. Indeed, in the proposed FBMC/QAM,the data symbol and the inherent interference term are both complex. Finally, we introduce a novel FBMC scheme and a transmission strategy in order to avoid the inherent interference terms. This proposed scheme (that we call FFT-FBMC) transforms the FBMC system into an equivalent system formulated as OFDM regardless of some residual interference. Thus, any OFDM transmission technique can be performed straightforwardly to the proposed FBMC scheme with a corresponding complexity growth. We develop the FFT-FBMC in the case of single-input single-output (SISO) configuration. Then, we extend its application to SM-MIMO configuration with ML detection and Alamouti coding scheme.

L'utilisation de la modulation à phase continue (CPM) est particulièrement intéressante lorsque le canal de communication comporte une forte non-linéarité et un support spectral limité, en particulier pour la voie aller, lorsque l'on dispose d'un amplificateur par porteuse à bord du satellite, et pour la voie retour où le terminal d'émission travaille à saturation. De nombreuses études ont été effectuées sur le sujet mais les solutions proposées reposent sur la démodulation/décodage itératif des CPM couplées à un code correcteur d'erreur de type convolutif ou bloc. L'utilisation de codes LDPC n'a pas été à ce jour abordée de façon précise. En particulier, il n'existe pas à notre connaissance de travaux sur l'optimisation des codes basés sur des graphes creux adaptés à ce type de schémas. Dans cette étude, nous proposons d'effectuer l'analyse asymptotique et le design d'un schéma Turbo-CPM basé sur des graphes creux. Une étude du récepteur associé comportant les fonctions de démodulation sera également effectuée. / The use of the continuous phase modulation (CPM) is interesting when the channel represents a strong non-linearity and in the case of limited spectral support; particularly for the uplink, where the satellite holds an amplifier per carrier, and for downlinks where the terminal equipment works very close to the saturation region. Numerous studies have been conducted on this issue but the proposed solutions use iterative CPM demodulation/decoding concatenated with convolutional or block error correcting codes. The use of LDPC codes has not yet been introduced. Particularly, no works, to our knowledge, have been done on the optimization of sparse graph-based codes adapted for the context described here. In this study, we propose to perform the asymptotic analysis and the design of turbo-CPM systems based on the optimization of sparse graph-based codes. Moreover, an analysis on the corresponding receiver will be done.

Artificiell intelligence (AI) har blivit vanligare att använda för att stödja människor i deras beslutsfattande. Maskininlärning (ML) är ett delområde inom AI som har börjat användas mer inom hälso-och sjukvården. Patientdata ökar inom vården och ett AI-system kan behandla denna ökade datamängd, vilket vidare kan utveckla ett beslutsstöd som hjälper läkarna. AI-tekniken blir vanligare att använda inom radiologin och specifikt inom mammografin som ett beslutsstöd. Användning av AI-teknik inom mammografin medför fördelar men det finns även utmaningar som inte har något med tekniken att göra.Icke-tekniska utmaningar är viktiga att se över för att generera en lyckad praxis. Studiens syfte var därför att undersöka icke-tekniska utmaningar vid användning av AI som ett beslutsstöd inom mammografi ur ett radiologiskt perspektiv. Radiologer med erfarenhet av mammografi intervjuades i syfte att öka kunskapen kring deras syn på användningen.Resultatet från studien identifierade och utvecklade de icke-tekniska utmaningarna utifrån temana: ansvar, mänskliga förmågor, acceptans, utbildning/kunskap och samarbete. Resultatet indikerade även på att inom dessa teman finns icke-tekniska utmaningar med tillhörande aspekter som är mer framträdande än andra. Studien ökar kunskaperna kring radiologers syn på användningen och bidrar till framtida forskning för samtliga berörda aktörer. Forskning kan ta hänsyn till dessa icke-tekniska utmaningar redan innan tekniken är implementerad i syfte att minska risken för komplikationer. / Artificial intelligence (AI) has become more commonly used to support people when making decisions. Machine learning (ML) is a sub-area of AI that has become more frequently used in health care. Patient data is increasing in healthcare and an AI system can help to process this increased amount of data, which further can develop a decision support that can help doctors. AI technology is becoming more common to use in radiology and specifically in mammography, as a decision support. The usage of AI technology in mammography has many benefits, but there are also challenges that are not connected to technology.Non-technical challenges are important to consider and review in order to generate a successful practice. The purpose of this thesis is therefore to review non-technical challenges when using AI as a decision support in mammography from a radiological perspective. Radiologists with experience in mammography were interviewed in order to increase knowledge about their views on the usage.The results identified and developed the non-technical challenges based on themes: responsibility, human abilities, acceptance, education/knowledge and collaboration. The study also found indications within these themes that there are non-technical challenges with associated aspects that are more prominent than others. This study emphasizes and increases the knowledge of radiologists views on the usage of AI and contributes to future research for all the actors involved. Future research can address these non-technical challenges even before the technology is implemented to reduce the risk of complications.

Machine learning methods have been used very successfully for quite some time to recognize patterns, model correlations and generate hypotheses. However, the possibilities for weighing and evaluating the resulting models and hypotheses, and the search for alternatives and contradictions are still predominantly reserved for humans. For this purpose, the novel concept of constructivist machine learning (conML) formalizes limitations of model validity and employs constructivist learning theory to enable doubting of new and existing models with the possibility of integrating, discarding, combining, and abstracting knowledge. The present work identifies issues that impede the systems capability to abstract knowledge from generated models for tasks that lie in the domain of procedural knowledge, and proposes and implements identified solutions. To this end, the conML framework has been reimplemented in the Julia programming language and subsequently been extended. Using a synthetic dataset of impedance spectra of modeled epithelia that has previously been analyzed with an existing implementation of conML, existing and new implementations are tested for consistency and proposed algorithmic changes are evaluated with respect to changes in model generation and abstraction ability when exploring unknown data. Recommendations for specific settings and suggestions for further research are derived from the results. In terms of performance, flexibility and extensibility, the new implementation of conML in Julia provides a good starting point for further research and application of the system.:Contents Abstract . . . . . III Zusammenfassung . . . . . IV Danksagung . . . . . V Selbstständigkeitserklärung . . . . . V 1. Introduction 1.1. Research Questions . . . . . 2 2. Related Work 2.1. Hybrid AI Systems . . . . . 5 2.2. Constructivist Machine Learning (conML) . . . . . 6 2.3. Implemented Methods . . . . . 9 2.3.1. Unsupervised Machine Learning . . . . . 9 2.3.2. Supervised Machine Learning . . . . . 11 2.3.3. Supervised Feature Selection . . . . . 13 2.3.4. Unsupervised Feature Selection . . . . . 17 3. Methods and Implementation 3.1. Notable Algorithmic Changes . . . . . 19 3.1.1. Rescaling of Target Values . . . . . 19 3.1.2. ExtendedWinner Selection . . . . . 21 3.2. Package Structure . . . . . 23 3.3. Interfaces and Implementation of Specific Methods . . . . . 29 3.4. Datasets . . . . . 41 4. Results 4.1. Validation Against the conML Prototype . . . . . 43 4.2. Change in Abstraction Capability . . . . . 49 4.2.1. Influence of Target Scaling . . . . . 49 4.2.2. Influence of the Parameter kappa_p . . . . . 55 4.2.3. Influence of the Winner Selection Procedure . . . . . 61 5. Discussion 5.1. Reproduction Results . . . . . 67 5.2. Rescaling of Constructed Targets . . . . . 69 5.3. kappa_p and the Selection of Winner Models . . . . . 71 6. Conclusions 6.1. Contributions of this Work . . . . . 77 6.2. Future Work . . . . . 78 A. Julia Language Reference . . . . . 81 B. Additional Code Listings . . . . . 91 C. Available Parameters . . . . . 99 C.1. Block Processing . . . . . 105 D. Configurations Reference . . . . . 107 D.1. Unsupervised Methods . . . . . 107 D.2. Supervised Methods . . . . . 108 D.3. Feature Selection . . . . . 109 D.4. Winner Selection . . . . . 110 D.5. General Settings . . . . . 110 E. Supplemental Figures . . . . . 113 E.1. Replacing MAPE with RMSE for Z-Transform Target Scaling . . . . . 113 E.2. Combining Target Rescaling, Winner Selection and High kappa_p . . . . . 119 Bibliography . . . . . 123 List of Figures . . . . . 129 List of Listings . . . . . 133 List of Tables . . . . . 135 / Maschinelle Lernverfahren werden seit geraumer Zeit sehr erfolgreich zum Erkennen von Mustern, Abbilden von Zusammenhängen und Generieren von Hypothesen eingesetzt. Die Möglichkeiten zum Abwägen und Bewerten der entstandenen Modelle und Hypothesen, und die Suche nach Alternativen und Widersprüchen sind jedoch noch überwiegend dem Menschen vorbehalten. Das neuartige Konzept des konstruktivistischen maschinellen Lernens (conML) formalisiert dazu die Grenzen der Gültigkeit von Modellen und ermöglicht mittels konstruktivistischer Lerntheorie ein Zweifeln über neue und bestehende Modelle mit der Möglichkeit zum Integrieren, Verwerfen, Kombinieren und Abstrahieren von Wissen. Die vorliegende Arbeit identifiziert Probleme, die die Abstraktionsfähigkeit des Systems bei Aufgabenstellungen in der Prozeduralen Wissensdomäne einschränken, bietet Lösungsvorschläge und beschreibt deren Umsetzung. Das algorithmische Framework conML ist dazu in der Programmiersprache Julia reimplementiert und anschließend erweitert worden. Anhand eines synthetischen Datensatzes von Impedanzspektren modellierter Epithelien, der bereits mit einem Prototypen des conML Systems analysiert worden ist, werden bestehende und neue Implementierung auf Konsistenz geprüft und die vorgeschlagenen algorithmischen Änderungen im Hinblick auf Veränderungen beim Erzeugen von Modellen und der Abstraktionsfähigkeit bei der Exploration unbekannter Daten untersucht. Aus den Ergebnissen werden Empfehlungen zu konkreten Einstellungen sowie Vorschläge für weitere Untersuchungen abgeleitet. Die neue Implementierung von conML in Julia bietet im Hinblick auf Performanz, Flexibilität und Erweiterbarkeit einen guten Ausgangspunkt für weitere Forschung und Anwendung des Systems.:Contents Abstract . . . . . III Zusammenfassung . . . . . IV Danksagung . . . . . V Selbstständigkeitserklärung . . . . . V 1. Introduction 1.1. Research Questions . . . . . 2 2. Related Work 2.1. Hybrid AI Systems . . . . . 5 2.2. Constructivist Machine Learning (conML) . . . . . 6 2.3. Implemented Methods . . . . . 9 2.3.1. Unsupervised Machine Learning . . . . . 9 2.3.2. Supervised Machine Learning . . . . . 11 2.3.3. Supervised Feature Selection . . . . . 13 2.3.4. Unsupervised Feature Selection . . . . . 17 3. Methods and Implementation 3.1. Notable Algorithmic Changes . . . . . 19 3.1.1. Rescaling of Target Values . . . . . 19 3.1.2. ExtendedWinner Selection . . . . . 21 3.2. Package Structure . . . . . 23 3.3. Interfaces and Implementation of Specific Methods . . . . . 29 3.4. Datasets . . . . . 41 4. Results 4.1. Validation Against the conML Prototype . . . . . 43 4.2. Change in Abstraction Capability . . . . . 49 4.2.1. Influence of Target Scaling . . . . . 49 4.2.2. Influence of the Parameter kappa_p . . . . . 55 4.2.3. Influence of the Winner Selection Procedure . . . . . 61 5. Discussion 5.1. Reproduction Results . . . . . 67 5.2. Rescaling of Constructed Targets . . . . . 69 5.3. kappa_p and the Selection of Winner Models . . . . . 71 6. Conclusions 6.1. Contributions of this Work . . . . . 77 6.2. Future Work . . . . . 78 A. Julia Language Reference . . . . . 81 B. Additional Code Listings . . . . . 91 C. Available Parameters . . . . . 99 C.1. Block Processing . . . . . 105 D. Configurations Reference . . . . . 107 D.1. Unsupervised Methods . . . . . 107 D.2. Supervised Methods . . . . . 108 D.3. Feature Selection . . . . . 109 D.4. Winner Selection . . . . . 110 D.5. General Settings . . . . . 110 E. Supplemental Figures . . . . . 113 E.1. Replacing MAPE with RMSE for Z-Transform Target Scaling . . . . . 113 E.2. Combining Target Rescaling, Winner Selection and High kappa_p . . . . . 119 Bibliography . . . . . 123 List of Figures . . . . . 129 List of Listings . . . . . 133 List of Tables . . . . . 135

The development of technology in project planning has enabled more efficient work through easier interaction and handling of complex problems. Despite the technological advancements, many companies have not yet utilized its potential, and many areas within the construction industry are in need of streamlined work processes. This study examines the possibilities of automating the design process for joints in steel structures using digital tools and artificial intelligence (AI) technologies. The digital tools examined are Tekla Structures and IDEA StatiCa, and how they, along with the developed workflow, can streamline the design process and improve the accuracy and quality of the work. Interviews with designers and AI developers have mapped out the current usage of digital tools and the perspective on automating the design process. Several challenges and limitations with the implementation of AI have been identified, such as safety risks, the need for extensive data, and human integration. To ensure that the joints are correctly designed and constructible, it is important to maintain a balance between automation and human expertise. The report aims to propose a workflow for automating the design process of joints. The proposed workflow may include various AI algorithms to achieve the best possible optimization. Some algorithms mentioned in the report are machine learning, artificial neural networks (ANN), and evolutionary algorithms (EA). These algorithms are suitable for identifying and preparing data, reading, and finding complex patterns. Previous automation of the design process for joints using digital tools has shown to reduce the time required for modeling and designing. The developed workflow can provide improved efficiency, accuracy, and quality in the design process; however, further development is required to overcome the current limitations. / Teknikens utveckling inom projektering har möjliggjort effektiviserade arbeten genom lättare samspel och hantering av komplexa problem. Trots teknikens utveckling är det många företag som ännu inte utnyttjat dess potential och många områden inom byggbranschen är i behov av en effektiviserad arbetsprocess. I denna studie undersöks möjligheterna att automatisera dimensioneringsprocessen för knutpunkter i stålkonstruktion genom användning av digitala verktyg och artificiella intelligenta (AI) teknologier. Digitala verktyg som undersöks är Tekla Structures och IDEA StatiCa och hur de tillsammans med det framtagna arbetsflödet kan effektivisera dimensioneringsprocessen och förbättra noggrannheten och kvaliteten i arbetet. Intervjuer med konstruktörer och AI-utvecklare har kartlagt den nuvarande användningen av digitala verktyg och synen på automatisering av dimensioneringsprocessen. Det har identifierats ett flertal utmaningar och begränsningar med implementeringen av AI, faktorer som säkerhetsrisker, behovet av omfattande data och mänsklig integration. För att säkerställa att knutpunkterna är korrekt dimensionerade och byggbara är det viktigt med en balans mellan automatisering och mänsklig expertis. Rapportens mål är att ta fram ett förslag på ett arbetsflöde för automatisering av dimensioneringsprocessen av knutpunkter. Det förslagna arbetsflödet kan inkludera olika AIalgoritmer för att uppnå bästa möjliga optimering. Några algoritmer som nämns i rapporten är maskininlärning, artificiella neurala nätverk (ANN) och evolutionära algoritmer (EA). Dessa algoritmer är lämpade för att identifiera och förbereda data, läsa av och hitta komplexa mönster. Tidigare automatisering av dimensioneringsprocessen för knutpunkter med hjälp av digitala verktyg har visats minska tidsåtgången för modellering och dimensionering. Det framtagna arbetsflödet kan ge en förbättrad effektivitet, noggrannhet och kvalitet i dimensioneringsprocessen, dock krävs ytterligare utveckling för att överkomma de nuvarande begräsningarna.

Due to the inadequate schooling system and the underpreparedness of learners in South African High Schools, Higher Education Institutions are faced with learners who do not meet the minimum criteria for acceptance into mainstream science programmes. In an attempt to increase access into the institution and meet the demands of more science and technology graduates, the Department of Chemistry at the historically disadvantaged ML Sultan Technikon introduced the Augmented programme for the National Diploma: Analytical Chemistry in 1994. This study provides a report on the profile of the students registered from 1994 to 1996, their graduation rate and a correlation of their points calculated for matric symbols with their graduation rate as well as their performance in Analytical Chemistry, the major subject of their diploma. Interviews are used to determine the perceptions of the lecturers regarding the structure of and teaching in the Augmented programme. / Chemistry / M.Sc. (Chemical Education)

This thesis focuses on the genre of libretto, the sung words for music theatre. The “little book” which accompanies every operatic performance is not just an extended program note to the spectacle, but in fact a substantial literary form in its own right. However, despite the immense influence of Wagner, the output from librettists in an operatic collaboration, has been serious ignored; indeed in opera the aesthetic function of language is frequently diminished and foreshortened, because it is often re-directed by and within the music. The result is that librettists are often seen as offering words to be “decomposed” by composers in the process of operatic collaboration. Opera, in the English language, finally achieved its rightful status, alongside its European counterparts, during the second half of the twentieth century. The thesis is intended to encompass something of the vast diversity of this genre and discusses a number of individual works as constituting legitimate literary artefacts in their own right. There will be five chapters featured in the thesis and each chapter is devoting to a specific theme.

Modern day technology aspires to always progress. This progression leads to a lot of research in any significant area of improvement. There is a growing amount of end-users in the wireless spectrum which has led to a need for improved bandwidth usage and BER values. In other words, new technologies which would increase the capacity of wireless systems are proving to be a crucial point of research in these modern times. Different combinations of multiuser receivers are evaluated to determine performance under normal working conditions by comparing their BER performance charts. Multiple input, multiple output (MIMO) systems are incorporated into the system to utilise the increased capacity rates achievable using the MIMO configuration. The effect of MIMO on the technologies associated with modern day technological standards such as CDMA and OFDM have been investigated due to the significant capacity potentials these technologies normally exhibit in a single antenna scenario. An in-depth comparison is established before comparison is made with a conventional maximum likelihood (ML) detector. The complexity of the ML detector makes its realization evaluated in such a manner to achieve the same or near ML solution but with lower computational complexity. This was achieved using a proposed modification of the Schnorr-Euchner Sphere decoding algorithm (SE-SDA). The proposed sphere decoder (P-SD) adopts a modification of the radius utilised in the SE-SDA to obtain a near ML solution at a much lower complexity compared to the conventional ML decoder. The P-SD was configured to work in different MIMO antenna configurations. The need for the highest possible data rates from the available limited spectrum led to my research into the multi-user detection scenario and MIMO.