Aminoacetona (AA) é um catabólito de Thr e Gly que se acumula nas síndromes cri-du-chat e treoninemia. Atualmente, a oxidação de AA é considerada uma das fontes alternativas de metilglioxal (MG), agente citotóxico e genotóxico, em diabetes mellitus. Em estados de deficiência metabólica, tal como o diabetes, há acúmulo de AA que, por sua vez, sofre oxidação na presença de amino oxidases sensíveis à semicarbazida (SSAO) com a produção de MG, H2O2 e NH4+. As SSAO são enzimas Cu-dependentes, cujo mecanismo de atuação ainda é pouco conhecido e possui como substrato, além de AA, metilamina (endógena) e a benzilamina (xenobiótico). AA possui um grupo amino vicinal à uma carbonila, o que sugere que ela possa sofrer enolização e oxidação catalisada por metal, produzindo espécies reativas de oxigênio (EROs), inclusive radicais HO•. A presente tese tem por objetivo esclarecer o mecanismo pelo qual AA sofre oxidação aeróbica, direta e catalisada por metal, com concomitante produção de EROs. Foi dada ênfase à catalise por ferro por sua implicação em desordens associadas com diabetes. Serão apresentados resultados que implicam AA como promotora de danos a membrana de mitocôndrias isoladas, bem como a estrutura proteica de ferritina e ceruloplasmina (CP). Como ferritina e CP estão envolvidas na homeostase de ferro, os danos causados a estas proteínas por AA possivelmente afetam o estado redox de plasma de diabéticos, contribuindo significantemente para o aumento do estresse oxidativo no diabetes. / Aminoacetone (AA) is a threonine and glycine catabolite long known to accumulate in cri-du-chat and threoninemia syndromes and, more recent1y, implicated as a contributing source of methylglyoxal (MG) in diabetes mellitus. AcetylCoA overproduction in diabetes also leads to AA accumulation. AA as well as many other endogenous (e.g., methylamine) and xenobiotic amines (e.g., benzylamine) are oxidized by dioxygen in the presence of SSAO, a group of poorly understood plasma circulating and membrane bound Cu-dependent enzymes, yielding an aldehyde, H2O2 and NH4+ ions. With AA, SSAO activity paradoxally produces the cytotoxic and genotoxic MG. AA bears an amino group vicinal to the carbonyl function and therefore is expected to undergo phosphate-catalyzed enolization and iron-catalyzed oxidation to yield reactive oxygen species (ROS), including HO• radicals. The present work aims to clarify the mechanisms by which AA undergoes direct and metal-catalyzed aerobic oxidation to yield deleterious ROS, with emphasis on the catalytic role of iron given its well-known implications in diabetes. In the present work we show that ROS generated through the aerobic oxidation of AA are able to induce damage in isolated rat liver mitochondria as well as in horse spleen ferritin (HoSF) and human ceruloplasmin (CP). The current findings of changes in HoSF and CP may contribute to explain intracellular iron-induced oxidative stress during AA accumulation in diabetes mellitus patients.

O objetivo da pnmeIra parte do presente projeto é a síntese total da Isocicutoxina (esquema 1) e de alguns feromânios sexuais de insetos (esquema 2), utilizando algumas das reações já estudadas sistematicamente no nosso laboratório. (Ver PDF) As etapas chaves para síntese da Isocicutoxina foram uma reação de acoplamento entre um diino e um telureto vinílico, seguida por urna reação de Wittig. As etapas chaves para a síntese dos feromânios sexuais foram urna reação de acoplamento cruzado de um telureto vinílico com um organocrupato, seguida por urna reação tipo SN2 com um reagente de Grignard. O objetivo da segunda parte do presente projeto é a revisão bibliográfica e a sistematização de dados de RMN de 1H, 13C e 125Te d.e compostos contendo átomos de telúrio. Os ligantes contendo telúrio tiveram seus valores de RMN sistematizados e seus valores de coeficientes de blindagem efetivos analisados (esquema 3). (Ver PDF) Através de um software especializado, um banco de dados foi criado e possibilitou a simulação de espectros de RMN de 13C e 125Te. / The main goal of the first part of this project is the total synthesis of isocicutoxin (scheme 1) and some insects\' sexual pheromones by means of some reactions already studied by our group (scheme 2). (See PDF) The key steps for the synthesis of isocicutoxin were a coupling reaction between a diyne and a vinylic telluride, followed by a Wittig reaction. The key steps for the synthesis ofthe sexual pheromones were a cross coupling reaction between a vinylic telluride and an organocuprate, followed by a SN2 reaction with a Grignard reagent. The mam goal of the second part of the project lS the bibliographic reVleW and the systematization of 1H, 13C and 125Te data of tellurium compounds. The ligands containing tellurium had their NMR and their effective shielding values analyzed (Scheme 3). Using specialized software, a database was developed, which allowed the prediction of NMR 13C and 125Te spectra.

Saccharomyces cerevisiae HOP1, which encodes a component of the synaptonemal complex, plays an important role in both gene conversion and crossing over between homologs, as well as enforces the meiotic recombination checkpoint control over the progression of recombination intermediates. The zinc-finger motif (Znf) 348CX2CX19CX2C374) of Hop1 is crucial for its function in meiosis, since mutation of conserved Cys371 to Ser in this motif results in a temperature-sensitive phenotype, which is defective in sporulation and meiosis. The direct role for Hop1 or its ZnF in the formation of joint molecules and checkpoint control over the progression of meiotic recombination intermediates is unknown. To understand the underlying biochemical mechanism, we constructed a series of recombination intermediates. Hop1 or its ZnF were able to bind different recombination intermediates. Interestingly, the binding affinity of Hop1 and its ZnF was much higher for the Holliday junction as compared to other recombination intermediates. The complexes of Hop1 or its ZnF with the Holliday junction were stable and specific as shown by NaCl titration and competition experiment. Hop1 and its ZnF blocked BLM helicase-induced unwinding of the Holliday junction, indicating that the interaction between Hop1 and its ZnF with the Holliday junction is specific. DNase I footprinting experiment showed that Hop1 or its ZnF bind to the center of the Holliday junction. 2-aminopurine fluorescence and KMnO4 experiments showed that Hop1 or its ZnF can distort the Holliday junction in a 2-fold symmetrical manner. The molecular modeling study showed that Hop1 ZnF folded into unique helix-loop-helix motif and bound to center of the Holliday junction. In summary, this study shows that Hop1 protein or its ZnF interact specifically with the Holliday junction and distort its structure. Taken together, these results implicate that Hop1 protein might coordinate the physical monitoring of meiotic recombination intermediates during the process of branch migration and that Hop1 ZnF acts as a structural determinant of Hop1 protein functions.

Ubiquitylation is an indispensable post-translational modification system in eukaryotic cells that leads to the covalent attachment of a small ubiquitin (Ub) protein onto a target. The traditional and best-characterized role for ubiquitylation is a fundamental regulatory mechanism whereby target proteins are tagged with a characteristic Lys48-linked Ub chain that signals for their elimination through proteasomal degradation. Challenging this conventional wisdom is the finding that some ubiquitylated proteins are modified by Ub chains linked through Lys63, providing a molecular signal that is thought to be structurally and functionally distinct from Lys48-linked Ub chains. Of further interest and significance is that the Lys63-linked Ub chains are apparently synthesized through a novel biochemical mechanism employing a unique complex formed between a true Ub conjugating enzyme (E2), Ubc13, and an E2-variant (Uev), Mms2 (or Uev1A). The goal of this thesis was to employ structural and functional approaches in order to better characterize the Ubc13-Mms2 Lys63-linked Ub conjugation complex. <p>Error-free DNA damage tolerance (DDT) in the budding yeast is dependent on Lys63-linked Ub chains synthesized by Ubc13-Mms2 and thus provided the opportunity to experimentally test the function of the human UBC13 and MMS2 genes in a simple model organism. Human UBC13 and MMS2 were each shown to function in place of their yeast counterparts and in accordance, human Ubc13 was shown to physically interact with yeast Mms2, and vice versa. Two human MMS2 homologs were also tested and it was determined that UEV1A but not UEV1B can function in place of mms2 in yeast DDT. Physical interactions were observed between Ubc13 and Uev1A, but not between Ubc13 and Uev1B, suggesting that Ubc13-Uev complex formation is required for function. <p>In collaboration with a research group at the University of Alberta, crystal structure and NMR data were used to develop a mechanistic model for the conjugation of Lys63-linked Ub chains by the Ubc13-Mms2 heterodimer, whereby the special orientation of two Ub molecules facilitates a specific Ub-Ub linkage via Lys63. In order to help support the in vitro model and to determine how the Ubc13-Mms2 structure relates to biological function, I used a structure-based approach to direct the creation of point mutations within four key regions of the Ubc13-Mms2 heterodimer; the Ubc13 active-site, the Ubc13-E3 (Ub ligating enzyme) interface, the Mms2-Ub interface, and the Ubc13-Mms2 interface. <p>Underscoring the importance of the Ub conjugation by Ubc13-Mms2, a Ubc13-C87S active-site mutation was created that could bind to Mms2 but was unable to function in DDT. Regarding the Ubc13-E3 interface, a single Ubc13-M64A point mutation had a potent effect on disrupting Ubc13 function in DDT, as well as its physical interaction with Rad5, TRAF6, and CHFR. The results suggest that different RING finger E3s use the same Ubc13 surface to sequester the Ub conjugation activity of Ubc13-Mms2. Two human Mms2 mutations at Ser32 and Ile62, which are contained within the Mms2-Ub interface, were found to reduce the ability of Mms2 to bind Ub. When the corresponding yeast mutations are combined, a synergistic loss in DDT function is observed. The relative orientation of Ser32 and Ile62 suggests that the Mms2 and Tsg101 Uev families use different Uev surfaces to physically interact with Ub. A 200 ìM dissociation constant for the wild-type Mms2-Ub interaction was also determined. The systematic mutagenesis and testing of 14 Ubc13-Mms2 interface residues led to mutants with partial or complete disruption of binding and function. Using this data, a model involving the insertion of a specific Mms2-Phe residue into a unique Ubc13 hydrophobic pocket was created to explain the specificity of Mms2 for Ubc13, and not other E2s. In addition, the dissociation constant for the wild-type Ubc13-Mms2 heterodimer was determined to be approximately 50 nM. <p>The structural and functional studies strongly support the notion that Ubc13-Mms2 complex has the unique ability to conjugate Lys63-linked Ub chains. However, several reported instances of Lys63-linked Ub chains in vivo have not yet been attributed to Ubc13 or Mms2. To address the disparity I was able to demonstrate and map a physical interaction between Mms2 and Rsp5, an E3 implicated in Lys63-linked Ub conjugation. Surprisingly, it was found that MMS2 is not responsible for the RSP5-dependent Lys63-linked Ub conjugation of a plasma membrane protein. A possible explanation for the apparent paradox is presented.

Ubiquitylation is an indispensable post-translational modification system in eukaryotic cells that leads to the covalent attachment of a small ubiquitin (Ub) protein onto a target. The traditional and best-characterized role for ubiquitylation is a fundamental regulatory mechanism whereby target proteins are tagged with a characteristic Lys48-linked Ub chain that signals for their elimination through proteasomal degradation. Challenging this conventional wisdom is the finding that some ubiquitylated proteins are modified by Ub chains linked through Lys63, providing a molecular signal that is thought to be structurally and functionally distinct from Lys48-linked Ub chains. Of further interest and significance is that the Lys63-linked Ub chains are apparently synthesized through a novel biochemical mechanism employing a unique complex formed between a true Ub conjugating enzyme (E2), Ubc13, and an E2-variant (Uev), Mms2 (or Uev1A). The goal of this thesis was to employ structural and functional approaches in order to better characterize the Ubc13-Mms2 Lys63-linked Ub conjugation complex. <p>Error-free DNA damage tolerance (DDT) in the budding yeast is dependent on Lys63-linked Ub chains synthesized by Ubc13-Mms2 and thus provided the opportunity to experimentally test the function of the human UBC13 and MMS2 genes in a simple model organism. Human UBC13 and MMS2 were each shown to function in place of their yeast counterparts and in accordance, human Ubc13 was shown to physically interact with yeast Mms2, and vice versa. Two human MMS2 homologs were also tested and it was determined that UEV1A but not UEV1B can function in place of mms2 in yeast DDT. Physical interactions were observed between Ubc13 and Uev1A, but not between Ubc13 and Uev1B, suggesting that Ubc13-Uev complex formation is required for function. <p>In collaboration with a research group at the University of Alberta, crystal structure and NMR data were used to develop a mechanistic model for the conjugation of Lys63-linked Ub chains by the Ubc13-Mms2 heterodimer, whereby the special orientation of two Ub molecules facilitates a specific Ub-Ub linkage via Lys63. In order to help support the in vitro model and to determine how the Ubc13-Mms2 structure relates to biological function, I used a structure-based approach to direct the creation of point mutations within four key regions of the Ubc13-Mms2 heterodimer; the Ubc13 active-site, the Ubc13-E3 (Ub ligating enzyme) interface, the Mms2-Ub interface, and the Ubc13-Mms2 interface. <p>Underscoring the importance of the Ub conjugation by Ubc13-Mms2, a Ubc13-C87S active-site mutation was created that could bind to Mms2 but was unable to function in DDT. Regarding the Ubc13-E3 interface, a single Ubc13-M64A point mutation had a potent effect on disrupting Ubc13 function in DDT, as well as its physical interaction with Rad5, TRAF6, and CHFR. The results suggest that different RING finger E3s use the same Ubc13 surface to sequester the Ub conjugation activity of Ubc13-Mms2. Two human Mms2 mutations at Ser32 and Ile62, which are contained within the Mms2-Ub interface, were found to reduce the ability of Mms2 to bind Ub. When the corresponding yeast mutations are combined, a synergistic loss in DDT function is observed. The relative orientation of Ser32 and Ile62 suggests that the Mms2 and Tsg101 Uev families use different Uev surfaces to physically interact with Ub. A 200 ìM dissociation constant for the wild-type Mms2-Ub interaction was also determined. The systematic mutagenesis and testing of 14 Ubc13-Mms2 interface residues led to mutants with partial or complete disruption of binding and function. Using this data, a model involving the insertion of a specific Mms2-Phe residue into a unique Ubc13 hydrophobic pocket was created to explain the specificity of Mms2 for Ubc13, and not other E2s. In addition, the dissociation constant for the wild-type Ubc13-Mms2 heterodimer was determined to be approximately 50 nM. <p>The structural and functional studies strongly support the notion that Ubc13-Mms2 complex has the unique ability to conjugate Lys63-linked Ub chains. However, several reported instances of Lys63-linked Ub chains in vivo have not yet been attributed to Ubc13 or Mms2. To address the disparity I was able to demonstrate and map a physical interaction between Mms2 and Rsp5, an E3 implicated in Lys63-linked Ub conjugation. Surprisingly, it was found that MMS2 is not responsible for the RSP5-dependent Lys63-linked Ub conjugation of a plasma membrane protein. A possible explanation for the apparent paradox is presented.

Conjugated polymers and oligomers have been widely studied based on their wide range of useful properties and applications. Given the importance of self-assembly and charge transfer in the development of conjugated materials for use in electronic applications, it is crucial to: (i) prepare functional materials by molecular design, (ii) evaluate the structure-property relationships of new materials, and (iii) develop fundamental understanding of electronic structure and charge transport behavior. The use of conjugated polymeric materials in electronic applications relies on control of the assembly and orientation of the polymer chains in the solid state. Conjugated polymers with liquid crystalline behavior could be used to implement an additional level of control over orientation and resultant properties. Substitution of the conjugated polythiophene backbone with semifluoroalkyl side chains (i.e., the diblock -(CH2)m(CF2)nF) has afforded materials with unusual properties. The mutual immiscibility of the aromatic backbone, the alkyl side-chain segments, and the fluoroalkyl side-chain termini provides control over supramolecular packing. A series of eight polymers has been synthesized, in which the lengths of the alkyl (m) and fluoroalkyl (n) segments are varied. One regiorandom analogue and two poly(3-alkylthiophene)s were also synthesized for comparative purposes. The structure, molecular weight, and regioregularity of the polymers were evaluated using a variety of techniques. The semifluoroalkyl-substituted polymers have been systematically studied to determine the effect of side chain length and m:n block ratios on their solution state, liquid crystalline, and solid state properties. The effect of side chains on conjugation was determined, where solubility allowed, by solution-state UV-visible and fluorescence spectroscopy. The thermal and liquid crystalline properties of the homopolymers were evaluated by DSC, variable-temperature X-ray diffraction, and polarized optical microscopy. Several semifluoroalkyl-substituted polythiophene homologues show liquid crystalline behavior. Molecular packing and charge transport are key factors governing the use of conjugated materials in electronic applications. A wide variety of oligomers have been studied as models for charge migration in conjugated polymers. One-dimensional models do not adequately represent two-dimensional charge transport; thus, a variety of two-dimensional, covalently-linked models have been developed. Previous work by our group, and others, led to the proposal of bis(oligothienyl) compounds as models to study the interaction of the ð-conjugated chains. Previous reports by other researchers described the synthesis and characterization of hydrogen-terminated analogues of 1,8-bis(oligothienyl)naphthalenes. However, these materials proved to be unsuitable for use as charge transport models, as they were subject to irreversible polymerization upon oxidation. Installation of methyl groups at the terminal a-positions of 1,8-bis(oligothienyl)naphthalenes allowed us to create a series of models in which conjugated chains are held in close proximity. This provides access to multiple redox states, and future systems based on these molecules may be used as models for charge transport or as functional materials for incorporation into devices.

This thesis deals with the investigation of the first hyperpolarizabilities (β) of a large number of molecules linked to other molecules either covalently or noncovalently. Chapter 1 gives a brief introduction to supramolecular chemistry and Nonlinear Optics (NLO). A survey of literature pertinent to noncovalently interacting supramolecular assembly and their NLO properties as well as NLO properties of oligomeric systems has been presented. The scope of the present investigation has been described at the end of the chapter. Chapter 2 discusses all the methods used in carrying out this thesis work. The first hyperpolarizabilities (β) of all the compounds have been measured by the hyper Rayleigh scattering (HRS) technique; the experimental details of which are written in this chapter. Various spectroscopic techniques such as NMR, IR, UV-Vis, etc. that were used in the investigation have been presented. The subsequent chapters 3-5 deal with the actual results obtained in this work. In chapter 3 first hyperpolarizabilities of o-, m-, and p-aminobenzoic acids and their oligomers viz., dimer, trimer and tetramer (covalently linked) have been studied. The compounds are synthesized and characterized by various spectroscopic methods and their β values have been measured by HRS. The hyperpolarizability increases in going from the monomer to the dimer but decreases subsequently from the dimer to the trimer to the tetramer. This unexpected trend in β has been attributed to the formation of molecular aggregates in the trimers and tetramers. Further evidences of aggregation come from the results of1H NMR spectroscopy and conductivity measurements. In chapter 4, synthesis, characterization and HRS investigation to probe the formation, dissociation and binding constants of hydrogen bonded supramolecular complexes (noncovalent interaction) formed in solution between 6-amino-2-(pivaloylamino)pyridine and ferrocene functionalized barbituric acid and 5-methoxy-N,N′-bis(6-amino-2-pyridinyl)-1,3-benzenedicarboxamide and ferrocenyl barbituric acid have been described. From the HRS data the stoichiometry of the supramolecular complexes has been determined and compared to that from the NMR data. Some of the complex stoichiometries that are measured by HRS have not been seen in the NMR data and vice versa. The results have been rationalized in terms of the strengths and weaknesses of various spectroscopic methods as applied to this problem. Many fold increase in the β value has been realized in the supramolecular complex formation process. Depolarized HRS experiments have been carried out to obtain structural information on the complexes. In the last chapter the synthesis, characterization and measurements on the first hyperpolarizabilities of unsubstituted tetraphenylporphyrin and its metallated complexes have been presented. Synthesis of supramolecular complexes of ferrocenyl barbituric acid with functionalized porphyrin compounds has been carried out although the amount of the final complex was insufficient for HRS measurements. This chapter ends with a perspective for the future work in the direction.

Among Nature's creation, terpenoids are more versatile and exciting natural products. In a remarkable display of synthetic ingenuity and creativity, nature has endowed terpenes with a bewildering array of carbocyclic frameworks with unusual assemblage of rings and functionalities. This phenomenal structural diversity of terpenes makes them ideal targets for developing and testing new synthetic strategies for efficient articulation of carbocyclic frameworks. The thesis entitled “Ireland-Claisen Rearrangement Based Strategy to Sesquiterpenes Containing Vicinal Quaternary Carbon Atoms” demonstrates the utility of the Ireland ester Claisen rearrangement and RCM reactions for the synthesis of a variety of sesquiterpenes containing vicinal quaternary carbon atoms. The results are described in five different sections, viz., (a) Synthesis of herbertene-1,13-diol and α-herbertenol; (b) Total syntheses of herbertenolide, herberteneacetal, herbertene-1,14-diol and herbertene-1,15-diol; (c) First total synthesis of the spirobenzofuran isolated from Acremonium sp. HKI 0230; (d) Total synthesis of lagopodin A; and (e) Synthesis of Laurencenone C, α- and β-chamigrenes. Complete details of the experimental procedures and the spectroscopic data were provided in a different section. A brief introduction is provided wherever appropriate to keep the present work in proper perspective. The compounds are sequentially numbered (bold), references are marked sequentially as superscripts and listed in the last section of the thesis. All the spectra included in the thesis were obtained by xeroxing the original NMR spectra. To begin with a short and efficient synthesis of herbertene-1,13-diol and α-herbertenol has been achieved starting from 2-allyl-4-methylanisole. Ireland ester Claisen rearrangement of the dimethylallyl 2-arylpent-4-enoate, obtained from p-cresol in seven steps, followed by RCM reaction of the resultant diene generated 1-aryl-1,2,2-trimethylcyclopent-3-enecarbo-xylate, which on functional group transformations provided (±)-herbertene-1,13-diol and (±)-α-herbertenol. Ireland ester Claisen rearrangement of E-3-(2-methoxy-5-methylphenyl)but-2-en-1-yl 2-methylpent-4-enoate furnished a stereoisomeric mixture of the dieneesters, which on RCM reaction generated an epimeric mixture of 2-aryl-1,2-dimethylcyclopent-3-enecarboxylates. These esters were further elaborated into (±)-herbertene-1,14-diol, (±)-herbertene-1,15-diol and (±)-herberteneacetal via epi-herbertenolide and (±)-herbertenolide. First total synthesis of a spirobenzofuran isolated from Acremonium sp. HKI 0230 has been accomplished starting from 2,5-dimethoxy-4-methylphenylacetate, confirming the structure of the natural product. Ireland ester Claisen rearrangement of dimethylallyl 2-(2,5-dimethoxy-4-methylphenyl)pent-4-enoate followed by RCM reaction and demethylation furnished a lactone, cyclopentaspirobenzofuranone, which on further functional group transformations completed the first total synthesis of the spirobenzofuran. 1-(2,5-Dimethoxy-4-methylphenyl)-1,2-dimethylcyclopent-3-enecarboxylate, an intermediate in the synthesis of spirobenzofuran, has been further elaborated into 1-aryl-1,2,2-trimethylcyclopent-3-ene, which on functional group transformations transformed into (±)lagopodin A and (±)-enokipodins A and B. Efficient total syntheses of laurencenone C, α-chamigrene and β-chamigrenes have been accomplished employing an Ireland ester Claisen rearrangement and RCM reaction as key steps starting from the Diels-Alder adduct of isoprene and acrylic acid. Ireland ester Claisen rearrangement of dimethylallyl cyclohex-3-enecarboxylate generated methyl 1-(1',1'-dimethylallyl)cyclohex-3-enecarboxylate, which was further elaborated into 5,5,9-trimethyl-spiro[5.5]undeca-3,8-dien-1-ol employing an RCM reaction as the key step. The spirodienol on further functional group transformations generated (±)-laurencenone C, (±)-α-chamigrene and (±)-β-chamigrene.

The diethyl ester of o-phenylenebis(oxamic acid) (opbaH2Et2) was treated with an excess of RNH2 in MeOH to cause the exclusive formation of the respective o-phenylenebis(N(R)-oxamides) (opboH4R2, R = Me 1, Et 2, nPr 3) in good yields. Treatment of 1–3 with half an equivalent of [Cu2(AcO)4(H2O)2] or one equivalent of [Ni(AcO)2(H2O)4] followed by the addition of four equivalents of [nBu4N]OH resulted in the formation of mononuclear bis(oxamidato) type complexes [nBu4N]2[M(opboR2)] (M = Ni, R = Me 4, Et 5, nPr 6; M = Cu, R = Me 7, Et 8, nPr 9). By addition of two equivalents of [Cu(pmdta)(NO3)2] to MeCN solutions of 7–9, novel trinuclear complexes [Cu3(opboR2)(L)2](NO3)2 (L = pmdta, R = Me 10, Et 11, nPr 12) could be obtained. Compounds 4–12 have been characterized by elemental analysis and NMR/IR spectroscopy. Furthermore, the solid state structures of 4–10 and 12 have been determined by single-crystal X-ray diffraction studies. By controlled cocrystallization, diamagnetically diluted 8 and 9 (1%) in the host lattice of 5 and 6 (99%) (8@5 and 9@6), respectively, in the form of single crystals have been made available, allowing single crystal ESR studies to extract all components of the g-factor and the tensors of onsite CuA and transferred NA hyperfine (HF) interaction. From these studies, the spin density distribution of the [Cu(opboEt2)]2− and [Cu(opbonPr2)]2− complex fragments of 8 and 9, respectively, could be determined. Additionally, as a single crystal ENDOR measurement of 8@5 revealed the individual HF tensors of the N donor atoms to be unequal, individual estimates of the spin densities on each N donor atom were made. The magnetic properties of 10–12 were studied by susceptibility measurements versus temperature to give J values varying from −96 cm−1 (10) over −104 cm−1 (11) to −132 cm−1 (12). These three trinuclear CuII-containing bis(oxamidato) type complexes exhibit J values which are comparable to and slightly larger in magnitude than those of related bis(oxamato) type complexes. In a summarizing discussion involving experimentally obtained ESR results (spin density distribution) of 8 and 9, the geometries of the terminal [Cu(pmdta)]2+ fragments of 12 determined by crystallographic studies, together with accompanying quantum chemical calculations, an approach is derived to explain these phenomena and to conclude if the spin density distribution of mononuclear bis(oxamato)/bis(oxamidato) type complexes could be a measure of the J couplings of corresponding trinuclear complexes. / Dieser Beitrag ist aufgrund einer (DFG-geförderten) Allianz- bzw. Nationallizenz frei zugänglich.

19 Dec 2004. / Published through the Information Bridge: DOE Scientific and Technical Information. "IS-T 2009" Ivana Adamovic. 12/19/2004. Report is also available in paper and microfiche from NTIS.