Spelling suggestions: "subject:"amolecular 3structure"" "subject:"amolecular 1structure""
301 |
Design, Synthesis and Evaluation of Novel Biarylpyrimidines ¿ a New Class of Ligand for Unusual Nucleic Acid Structures.Wheelhouse, Richard T., Jenkins, Terence C., Jennings, Sharon A., Pletsas, Dimitrios January 2006 (has links)
No / Biarylpyrimidines are characterized as selective ligands for higher-order nucleic acid structures. A concise and efficient synthesis has been devised incorporating Suzuki biaryl cross-coupling of dihalopyrimidines. Two ligand series are described based on the parent thioether 4,6-bis[4-[[2-(dimethylamino)ethyl]mercapto]-phenyl]pyrimidine (la) and amide 4,6-bis(4[(2-(dimethylamino)ethyl)carboxamido]phenyl)pyrimidine (2a) compounds. In UV thermal denaturation studies with the poly(dA)·[poly(dT)]2 triplex structure, thioethers showed stabilization of the triplex form (¿Tm ¿ 20 °C). In contrast, amides showed duplex stabilization (¿Tm ¿ 15 °C) and either negligible stabilization or specific destabilization (¿Tm = -5 °C) of the triplex structure. Full spectra of nucleic acid binding preferences were determined by competition dialysis. The strongest interacting thioether bound preferentially to the poly(dA)·[poly(dT)]2 triplex, Kapp = 1.6 x 105 M-1 (40 x Kapp for CT DNA duplex). In contrast, the strongest binding amide selected the (T2G20T2)4 quadruplex structure, Kapp = 0.31 x 105 M-1 (6.5 x Kapp for CT DNA duplex).
|
302 |
The synthesis and characterisation of metal complexes containing chemically reduced bipyridyl ligand systemsIrwin, Mark Robert Floyd January 2013 (has links)
This thesis describes the synthesis and characterisation of metal complexes that contain chemically reduced bipyridyl ligands. The crystal structures of twenty-six novel complexes are reported alongside detailed discussions on the electronic and spectroscopic effects and trends associated with the different oxidation states within these species. Chapter One introduces the isomers of bipyridine and their redox chemistry, the concept of non-innocent ligands and the spectroscopic techniques that are currently used in determining ligand oxidation states. Subsequently, examples of main group, transition metal, lanthanide and actinide species that contain or may contain reduced forms of the ligand are discussed. Chapter Two details the synthesis and structural characterisation of alkali metal salts of singly and doubly reduced forms of the three commercially available bipyridine isomers. The effects of this reduction are investigated with the aim of developing diagnostic fingerprints for each of the ligand oxidation states. Chapter Three discusses the synthesis of an homologous series of compounds of the form [M(2,2'-bipy)(mes)<sub>2</sub>]<sup>n–</sup> where M = Cr, Mn, Fe, Co, Ni and n = 0, 1. Trends in magnetism, bonding and electronic structure are investigated with reference to theoretical calculations and the diagnostic fingerprints identified in the previous chapter. Chapter Four describes the synthesis and characterisation of three compounds containing the isostructural motif [Zn<sub>2</sub>(4,4'-bipy)(mes)<sub>4</sub>]<sup>n–</sup> where n = 0, 1, 2. Structural and spectroscopic changes are discussed and com- pared to theoretical calculations. Chapter Five contains descriptions of the spectroscopic techniques employed in the above research and synthesis routes to all compounds featured in this thesis.
|
303 |
The effects of electronic quenching on the collision dynamics of OH(A) with Kr and XePerkins, Thomas Edward James January 2014 (has links)
This thesis presents an experimental and theoretical study of the collision dynamics of OH(A<sup>2</sup>Σ<sup>+</sup>) with Kr and Xe. These two systems both exhibit a significant degree of electronically non-adiabatic behaviour, and a particular emphasis of the work presented here is to characterise the competition and interplay between electronic quenching on the one hand, and electronically adiabatic collisional processes on the other. Quenching takes place close to the bottom of the deepest potential well for both systems. In collisions that remain in the excited electronic state, this same region of the potential is also largely responsible for rotational energy transfer (RET) and the collisional depolarisation of angular momentum. Therefore, the direct competition between these processes suppresses the cross-sections for RET and collisional depolarisation from their expected value in the absence of quenching. To investigate this, experiments were carried out to measure cross-sections for the collisional transfer of electronic, vibrational and rotational energy in OH(A, v=0,1) + Kr and OH(A, v=0) + Xe. In addition, measurements were made of the j-j' correlation -- that is, the relationship between the angular momentum of the OH radical before and after a collision -- in collisions with Kr and Xe, using the experimental technique of Zeeman quantum beat spectroscopy. Collisions with both Kr and Xe tend to effectively depolarise the angular momentum of the OH radical, due to the very anisotropic character of the potential on which the process occurs. Electronic quenching, which plays an essential role in both systems, is more prevalent with xenon as the crossing to the ground state potential is located in a more accessible location. These experimental results were compared with single surface quasi-classical trajectory (QCT) calculations, where the overestimate of rotational energy transfer or collisional depolarisation helps to elucidate the degree to which the presence of quenching suppresses these processes. Surface hopping QCT was then used to account for non-adiabatic transitions in the theory, which led to an improvement in agreement with experiment. However, standard surface hopping QCT theory failed to account for the full extent of quenching in these two systems. A major focus of this work is therefore on the development of an extension to standard surface hopping QCT theory to incorporate rovibronic couplings. In non-linear configurations, the excited state of the OH + Kr, Xe systems has A' symmetry, while the ground state is split into symmetric (A') and antisymmetric (A'') components. For these symmetry reasons, coupling is restricted to the two states of the same symmetry, however a rotation of the correct (A'') symmetry can induce transitions to the A'' state too. Inclusion of all three electronic states, and the relevant couplings between them, is found to be crucial for a proper description of experimental reality.
|
304 |
Studies of photoinduced molecular dynamics using a fast imaging sensorSlater, Craig Stephen January 2013 (has links)
Few experimental techniques have found such a diverse range of applications as has ion imaging. The field of chemical dynamics is constantly advancing, and new applications of ion imaging are being realised with increasing frequency. This thesis is concerned with the application of a fast pixelated imaging sensor, the Pixel Imaging Mass Spectrometry (PImMS) camera, to ion imaging applications. The experimental possibilities of such a marriage are exceptionally broad in scope, and this thesis is concerned with the development of a selection of velocity-map imaging applications within the field of photoinduced molecular dynamics. The capabilities of the PImMS camera in three-dimensional and slice imaging applications are investigated, in which the product fragment Newton-sphere is temporally stretched along the time-of-flight axis, and time-resolved slices through the product fragment distribution are acquired. Through experimental results following the photodissociation of ethyl iodide (CH<sub>3</sub>CH<sub>2</sub>I) at around 230 nm, the PImMS camera is demonstrated to be capable of recording well-resolved time slices through the product fragment Newton-sphere in a single experiment, without the requirement to time-gate the acquisition. The various multi-hit capabilities of the device represent a unique and significant advantage over alternative technologies. The details of a new experiment that allows the simultaneous imaging of both photoelectrons and photoions on a single detector for each experimental acquisition cycle using pulsed ion extraction are presented. It is demonstrated that it is possible to maintain a high velocity resolution using this approach through the simultaneous imaging of the photoelectrons and photoions that result from the (3 + 2) resonantly enhanced multi-photon ionisation of Br atoms produced following the photodissociation of Br<sub>2</sub> at 446.41 nm. Pulsed ion extraction represents a substantial simplification in experimental design over conventional photoelectron-photoion coincidence (PEPICO) imaging spectrometers and is an important step towards performing coincidence experiments using a conventional ion imaging apparatus coupled with a fast imaging detector. The performance of the PImMS camera in this application is investigated, and a new method for the determination of the photofragment detection efficiencies based on a statistical fitting of the coincident photoelectron and photoion data is presented. The PImMS camera is applied to laser-induced Coulomb explosion imaging (CEI) of an axially chiral substituted biphenyl molecule. The multi-hit capabilities of the device allow the concurrent detection of individual 2D momentum images of all ionic fragments resulting from the Coulomb explosion of multiple molecules in each acquisition cycle. Correlations between the recoil directions of the fragment ions are determined through a covariance analysis. In combination with the ability to align the molecules in space prior to the Coulomb explosion event, the experimental results demonstrate that it is possible to extract extensive information pertaining to the parent molecular structure and fragmentation dynamics following strong field ionisation. Preliminary simulations of the Coulomb explosion dynamics suggest that such an approach may hold promise for determining elements of molecular structure on a femtosecond timescale, bringing the concept of the `molecular movie' closer to realisation. Finally, the PImMS camera is applied to the imaging of laser-induced torsional motion of axially chiral biphenyl molecules through femtosecond Coulomb explosion imaging. The target molecules are initially aligned in space using a nanosecond laser pulse, and torsional motion induced using a femtosecond 'kick' pulse. Instantaneous measurements of the dihedral angle of the molecules are inferred from the correlated F+ and Br+ ion trajectories following photoinitiated Coulomb explosion at various time delays after the initial kick pulse. The technique is extended to include a second kick pulse, in order to achieve either an increase in the amplitude of the oscillations or to damp the motion, representing a substantial degree of control of the system. Measurements out to long kick-probe delays (200 ps) reveal that the initially prepared torsional wave packet periodically dephases and rephases, in accordance with the predictions of recent theoretical work.
|
305 |
Alkaline earth- and rare earth-transition metal complexesBlake, Matthew Paul January 2013 (has links)
This Thesis describes the synthesis and characterisation of new alkaline earth- and rare earth-transition metal complexes. Experimental and computational studies were performed to investigate the structure and bonding in these complexes. Their reactivity was also studied. Chapter 1 introduces metal-metal bonded complexes and current alkaline earth- and rare earth-transition metal bonded complexes. Chapter 2 describes experimental and computational studies of new alkaline earth- and lanthanide-Fe complexes possessing the [CpFe(CO)2]- anion. Chapter 3 presents experimental studies of the reduction of Fe3(CO)12 with Ca. Chapter 4 describes experimental and computational studies of new alkaline earth- and lanthanide-Co complexes containing the [Co(CO)3(PR3)]- anion. Chapter 5 presents full experimental procedures and characterising data for the new complexes reported. Appendix describes the attempted synthesis of [Ca{CpRu(CO)2}2(THF)x]y and study by DFT of [CaRp2(THF)3]2 CD Appendix contains .cif files for all new crystallographically characterised complexes described.
|
306 |
Natural and bioinspired silk spinningDavies, Gwilym January 2014 (has links)
This thesis describes an investigation into silk spinning, with the objective of producing high performance silk fibres in the laboratory using a novel spinning device based upon observations on natural spinning glands and processes. After an in-depth literature review the work is reported in two sections: natural and artificial spinning. The literature provides fragmented data on different aspects of natural silk production, and artificial spinning has not yet reproduced fibres with the properties of native silk fibres, despite unfounded claims of biomimetic spinning. The first half of the thesis looks at natural silk spinning. The work started with a general study of the morphology of spider and silkworm spinning ducts: First, how the silk fibre develops as the dope flows through the gland; and second the relationship between silk fibre properties and both gland morphology and spinning speed. More detailed studies using histochemical and spectroscopic investigations showed that the silk ducts of the spider Nephila edulis and the silkworm Bombyx mori both contain β-chitin, despite an evolutionarily distant common ancestor. Finally, observations showed that the duct of N. edulis consists of alternating nanoporous discs, and FEA modelling indicated that the duct is optimised for mechanical integrity and permeability. The second half of the thesis describes the development of a spinning device that uses natural silk dope mainly taken from B. mori as feedstock. It begins with a description of the gradual development of the engineering aspects of the spinning device, to meet challenges raised during the spinning investigation. The development of a centrifugal capillary rheometer, for practical quantitative insights into rheological processes is then presented. Finally the spinning investigation is reported: first, the screening of spinning in glass capillaries based upon natural gland dimensions and flow rates, which have been shown to induce fibrillation in silk dope in a rheometer, and also included initiation of instability through heat applied along the capillary; second, the final spinning evaluation, using lessons learned from all the screening trials throughout the project, but also including a key development of a hydrophobic coating on the capillary tip to inhibit droplet formation and massively increase the process stability and ease of fibre production. The main conclusions from this work are that good silk fibre cannot be spun by flow shear stress alone; and, that heat instability induces indiscriminate gelation of the silk, whose disordered molecular structure gives poor silk fibre properties. The body of work behind these conclusions provides fundamental background information and new insights that will contribute to the next stages of development of artificial silk spinning, from obtaining a better understanding of the biology of natural spinning glands to the engineering difficulties of implementing the bioinspired principles.
|
307 |
Protein-protein recognition in biological systems exhibiting highly-conserved tertiary structure : cytochrome P450Johnson, Eachan Oliver Daniel January 2013 (has links)
Protein tertiary structure is more conserved than amino acid sequence, leading to a diverse range of functions observed in the same fold. Despite < 20 % overall sequence identity, cytochromes P450 all have the same fold. Bacterial Class I P450s receive electrons from a highly specific, often unidentified, ferredoxin, in which case the hemoprotein is termed “orphaned”. CYP199A2, a Class I P450, accepts electrons from ferredoxins Pux and HaPux. Five orientation-dependent and one orientation-independent DEER measurements on paramagnetic HaPux and spin-labelled CYP199A2 yielded vector restraints, which were applied to building a model of the CYP199A2:HaPux complex in silico. A different binding mode was observed compared to P450cam:Pdx and P450scc:Adx, both recently elucidated by X-ray crystallography. This protocol was also applied to the CYP101D1:Arx complex. The first three measurements indicate that this heterodimer does not have a similar orientation to CYP199A2:HaPux, P450cam:Pdx, or P450scc:Adx. P450cam was fused to putidatredoxin reductase (PdR) to explore the kinetic effects with a view to improving electron transfer to orphan P450s. Heme incorporation of this enzyme depends on linker length. In whole cells, the fusion was more active after longer incubations. In vitro kinetics of the fusion exhibited some co-operativity and enhanced kinetics over the unfused system under steady-state conditions. The putative iron-sulfur biosynthesis ferredoxin PuxB had been engineered by rational mutagenesis to support catalysis by CYP199A2. It was confirmed this arose from improved protein-protein recognition. Engineering of E. coli ferredoxin based on these findings was carried out, resulting in electron-transfer to CYP199A4 from a novel engineered alien ferredoxin.
|
308 |
Five-membered sulfur-nitrogen ring compoundsMatuska, Vit January 2009 (has links)
A series of 1,3,2,4,5-dithiadiazarsoles with the general formula RAs(S₂N₂) (R = Me, Et, i-Pr, t-Bu, Ph and Mes) have been prepared and characterised by multinuclear NMR, IR and Raman spectroscopies and mass spectrometry. The X-ray structures of PhAs(S₂N₂) and MesAs(S₂N₂) were determined. The low temperature X-ray structures of the half-sandwich 5,1,3,2,4-metalladithiadiazoles Cp*M(S₂N₂) (M = Co, Ir) were determined and Cp*Rh(S₂N₂) was prepared. All three metalladithiadiazoles were characterised by multinuclear NMR, IR and Raman spectroscopies and mass spectrometry. The X-ray structures of complexes [Cp*RhCp*]Cl,[Cp*Rh(μ-S₃N₂)(μ-S₂O₃)RhCp*] and Cp*Ir[S₂N₂(IrCl₂Cp*)] obtained during this work were determined. The low temperature X-ray structure of Roesky's sulfoxide (S₃N₂O) is presented together with assignments of its vibrational spectra as suggested by theoretical calculations. The experimental structures of the metalladithiadiazoles and that of Roesky's sulfoxide are compared with calculated geometries. A limited amount of simple experiments have been carried out with selected title compounds to get an insight into their reactivity.
|
309 |
Preparation and characterisation of encapsulation magnetic metal iron oxide nanoparticlesAl-Saadi, Ali January 2012 (has links)
One of the most challenging goals in nanoparticle research is to develop successful protocols for the large-scale, simple and possibly low-cost preparation of morphologically pure nanoparticles with enhanced properties. The work presented in this thesis was focused on the synthesis, characterisation and testing of magnetic nanoparticles and their potential applications. There are a number of magnetic nano-materials prepared for specific applications such as metal oxide nanoparticles encapsulated with various porous materials including Fe₃O₄/Fe₂O₃ coated with soft bio-organic materials such as glycol chitosan and bovine serum albumin and hard materials such as silica (SiO₂) and zinc sulphide (ZnS). The preparation of these materials was achieved principally by bottom-up methods with different approaches including micro-emulsion, precipitation, electrostatic and thermolysis processes. The thesis also presents the uses of various analytical techniques for characterising different types of nano-materials including Attenuated Total Reflection Fourier Transformer Infrared Vibrational Spectroscopy (ATR-FTIR), Ultraviolet Visible- Near Infrared (UV-Vis-NIR) Spectroscopy, Zeta Potentiometric Surface Charge Analysis, Superconducting Quantum Interference Device (SQUID) and Vibration Sample Magnetometry (VSM) for magnetic analysis and powder X-Ray Diffraction (XRD) for crystallographic pattern analysis. There are many applications of magnetic nanoparticles, including nano-carriers for biological and catalytic reagents. The magnetic nanoparticles can facilitate separation in order to isolate the carriers from solution mixtures as compared to many inefficient and expensive classic methods, which include dialysis membrane, electrophoresis, ultracentrifugation, precipitation and column separation methods. There are six key chapters in this thesis: the first chapter introduces the up-to-date literature regarding magnetic nano-materials. The uses of magnetic nano-materials in drug binding and for protein separation are discussed in the second and third chapters. The fourth chapter presents the use of magnetic nanoparticle in conjunction with a photo-catalytic porous overlayer for the photo-catalytic reduction of organic molecules. The fifth chapter describes different analytical techniques used for the characterisation of nanoparticles and the underlying principles and the experimental details are also given. The sixth chapter summarises the results and provides an overview of the work in a wider context of future applications of magnetic nanoparticles.
|
310 |
Energy transfer processes in supramolecular light-harvesting systemsStevens, Amy L. January 2011 (has links)
This dissertation attempts to understand how energy transfer in a molecular wire and a spherical organic assembly are affected by molecular structure. The molecular wire is a DNA-hybrid structure composed of a strand of thymine bases appended by a cyanine dye. Hydrogen bonded to each base is a naphthalene-derivative molecule. Using time-integrated photoluminescence and time-correlated single photon counting measurements, energy transfer from the naphthalene donors to the cyanine acceptors was confirmed, and its dependence on temperature and DNA-template length investigated. Donor-thymine bonding was disrupted at temperatures above about 25 degrees Celcius resulting in poor donor template decoration and low rates of energy transfer. Increasing numbers of donors attach to the scaffold, forming an orderly array, as the template length increases due to the stabilising effects of the donor-donor pi-stacking interactions. Conversely, modelled energy transfer rates fall as the scaffold length increases because of the longer donor-acceptor distances involved. Therefore, the energy transfer rate was greatest for a template built from 30 thymines. The spherical organic assemblies (nanoparticles) are formed by fast injection of a small volume of molecularly dissolved fluorene-derivative amphiphilic molecules into a polar solvent. The amphiphilic molecules contained either a naphthalene (donor) or a benzothiadiazole (acceptor) core. The donor-acceptor mixed nanoparticles resemble an amorphous polymer film and were modelled as such using the Foerster resonance energy transfer theory. The Foerster radii extracted from the measurements depends intricately on the donor-acceptor spectral overlap and distance. The latter effect was controlled by the stacking interactions between the molecules. Altering the morphology of the structural units is the key to optimising energy transfer in molecular structures. To achieve efficient organic molecule-based devices, the importance of this property needs to be fully appreciated and effectively exploited.
|
Page generated in 0.0661 seconds