No description available.

Addressing the urgent need for innovative energy solutions amidst increasing environmental concerns, the focus on photovoltaic solar cells is intensifying. Currently limited by the Shockley-Queisser limit, conventional silicon-based solar cells offer a maximum power conversion efficiency of 32%. This limitation has inspired exploration into alternative materials such as two-dimensional multi-junction heterogeneous structures, notably two-dimensional molybdenum disulfide (2D-MoS2). With a 1.86 eV bandgap and remarkable mechanical strength, 2D-MoS2 presents a potential for higher power conversion efficiency and flexibility, with an exceptional ability to accept doping atoms. This study uses the Vienna ab initio Simulation Package to predict the performance of alloyed 2D-MoS2. Transition metals are added into the structure, with specific pairs showing a promising ability to optimize the bandgap. Hybrid density functional theory methods are used to investigate the effects of alloying on the electronic structure and optical absorption. Niobium-technetium, zirconium-ruthenium, and yttrium-rhodium alloyed 2D-MoS2 show potential for greater light absorption under natural light. The bandgap is tunable between 0.51 eV and 2.13 eV through varying alloying elements and concentrations. All structures demonstrate satisfactory thermal stability. Consequently, this alloying strategy holds potential for next-generation solar cells, though experimental testing is needed. / Att adressera det brådskande behovet av innovativa energilösningar i ljuset av ökande miljöproblem, intensifieras fokus på fotovoltaiska solceller. För närvarande begränsade av Shockley-Queisser gränsen, erbjuder konventionella kiselbaserade solceller en maximal omvandlingseffektivitet på 32%. Denna begränsning har inspirerat till utforskning av alternativa material som tvådimensionella flerleds-heterogena strukturer, framför allt 2D-MoS2. Med ett bandgap på 1.86 eV och märkbar mekanisk styrka, presenterar 2D-MoS2 en potential för högre omvandlingseffektivitet och flexibilitet, med en exceptionell förmåga att acceptera dopningsatomer. Denna studie använder Vienna ab initio Simulation Package för att förutsäga prestanda hos legerad 2D-MoS2. Övergångsmetaller läggs till i strukturen, med specifika par som visar en lovande förmåga att optimera bandgapet. Hybrid densitetsfunktionell teori metoder används för att undersöka effekterna av legering på den elektroniska strukturen och optiska absorptionen. Niobium-teknecium, zirkonium-ruthenium och yttrium-rhodium legerade 2D-MoS2 visar potential för större ljusabsorption under naturligt ljus. Bandgapet kan justeras mellan 0.51 eV och 2.13 eV genom att variera legeringselement och koncentration. Alla strukturer demonstrerar tillfredsställande termisk stabilitet. Följaktligen håller denna legeringsstrategi potential för nästa generations solceller, även om experimentell testning behövs.

No description available.

Inspired by graphene, I investigate the properties of several different real and artificial Dirac materials. Firstly, I consider a two-dimensional honeycomb lattice of metallic nanoparticles, each supporting localised surface plasmons, and study the quantum properties of the collective plasmons resulting from the near field dipolar interaction between the nanoparticles. I analytically investigate the dispersion, the effective Hamiltonian and the eigenstates of the collective plasmons for an arbitrary orientation of the individual dipole moments. When the polarisation points close to normal to the plane the spectrum presents Dirac cones, similar to those present in the electronic band structure of graphene. I derive the effective Dirac Hamiltonian for the collective plasmons and show that the corresponding spinor eigenstates represent chiral Dirac-like massless bosonic excitations that present similar effects to those of electrons in graphene, such as a non-trivial Berry phase and the absence of backscattering from smooth inhomogeneities. I further discuss how one can manipulate the Dirac points in the Brillouin zone and open a gap in the collective plasmon dispersion by modifying the polarisation of the localized surface plasmons, paving the way for a fully tunable plasmonic analogue of graphene. I present a phase diagram of gapless and gapped phases in the collective plasmon dispersion depending on the dipole orientation. When the inversion symmetry of the honeycomb structure is broken, the collective plasmons become gapped chiral Dirac modes with an energy-dependent Berry phase. I show that this concept can be generalised to describe many real and artificial graphene-like systems, labeling them Dirac materials with a linear gapped spectrum. I also show that biased bilayer graphene is another Dirac material with an energy dependent Berry phase, but with a parabolic gapped spectrum. I analyse the relativistic phenomenon of Klein Tunneling in both types of system. The Klein paradox is one of the most counter-intuitive results from quantum electrodynamics but it has been seen experimentally to occur in both monolayer and bilayer graphene, due to the chiral nature of the Dirac quasiparticles in these materials. The non-trivial Berry phase of pi in monolayer graphene leads to remarkable effects in transmission through potential barriers, whereas there is always zero transmission at normal incidence in unbiased bilayer graphene in the npn regime. These, and many other 2D materials have attracted attention due to their possible usefulness for the next generation of nano-electronic devices, but some of their Klein tunneling results may be a hindrance to this application. I will highlight how breaking the inversion symmetry of the system allows for results that are not possible in these system's inversion symmetrical counterparts.

2D molybdenum disulfide (MoS₂) gives a new inspiration for the field of nanoelectronics, photovoltaics, and sensorics. However, the most common processing technology, e.g., liquid‐phase based scalable exfoliation used for device fabrication, leads to the number of shortcomings that impede their large area production and integration. Major challenges are associated with the small size and low concentration of MoS₂ flakes, as well as insufficient control over their physical properties, e.g., internal heterogeneity of the metallic and semiconducting phases. Here it is demonstrated that large semiconducting MoS₂ sheets (with dimensions up to 50 µm) can be obtained by a facile cathodic exfoliation approach in nonaqueous electrolyte. The synthetic process avoids surface oxidation thus preserving the MoS₂ sheets with intact crystalline structure. It is further demonstrated at the proof‐of‐concept level, a solution‐processed large area (60 × 60 µm) flexible Ebola biosensor, based on a MoS₂ thin film (6 µm thickness) fabricated via restacking of the multiple flakes on the polyimide substrate. The experimental results reveal a low detection limit (in femtomolar–picomolar range) of the fabricated sensor devices. The presented exfoliation method opens up new opportunities for fabrication of large arrays of multifunctional biomedical devices based on novel 2D materials.

This work is focused on the study of luminescence of atomic thin layers of transition metal chalkogenides (eg. MoS2). In the experimental part, the work deals with the preparation of atomic thin layers of semiconducting chalcogenides and the subsequent manufacturing of plasmonic interference structures around these layers. The illumination of the interference structure will create a standing plasmonic wave that will excite the photoluminescence of the semiconductor. Photoluminescence was studied both by far-field spectroscopy and near-field optical microscopy.

The thesis deals with study of thin layers of transition metal dichalcogenides, especially of molybdenum disulfide. Nanostructures were fabricated on two-dimensional crystals of MoS2 and WSe2. Within followed analysis attention was paid to the photoluminescence properties. In the thesis transition metal dichalcogenides are reviewed and description of the modified process of preparation by micromechanical exfoliation is given.

A novel 2D hybrid with MoS₂ nanocrystals strongly coupled on nitrogen-enriched graphene (MoS₂/NGg-C₃N₄) is realized by mild temperature pyrolysis (550 °C) of a self-assembled precursor (MoS₃/g-C₃N₄–H⁺/GO). With rich active sites, the boosted electronic conductivity and the coupled structure, MoS₂/NGg₋C₃N₄ achieves superior lithium storage performance.

This thesis describes the fabrication and characterization of two-dimensional transition dichalcogenides (2D TMDs) nanolayers for various applications in electronic and opto-electronic devices applications. In Chapter 1, crystal and optical structure of TMDs materials are introduced. Many TMDs materials reveal three structure polytypes (1T, 2H, and 3R). The important electronic properties are determined by the crystal structure of TMDs; thus, the information of crystal structure is explained. In addition, the detailed information of photon vibration and optical band gap structure from single-layer to bulk TMDs materials are introduced in this chapter. In Chapter 2, detailed information of physical properties and synthesis techniques for molybdenum disulfide (MoS2), tungsten disulfide (WS2), and molybdenum ditelluride (MoTe2) nanolayers are explained. The three representative crystal structures are trigonal prismatic (hexagonal, H), octahedral (tetragonal, T), and distorted structure (Tʹ). At room temperature, the stable structure of MoS2 and WS2 is semiconducting 2H phase, and MoTe2 can reveal both 2H (semiconducting phase) and 1Tʹ (semi-metallic phase) phases determined by the existence of strains. In addition, the pros and cons of the synthesis techniques for nanolayers are discussed. In Chapter 3, the topic of synthesized large-scale MoS2, WS2, and MoTe2 films is considered. For MoS2 and WS2 films, the layer thickness is modulated from single-layer to multi-layers. The few-layer MoTe2 film is synthesized with two different phases (2H or 1Tʹ). The all TMDs films are fabricated using two-step chemical vapor deposition (CVD) method. The analyses of atomic force microscopy (AFM), high-resolution transmission electron microscopy (HRTEM), photoluminescence (PL), and Raman spectroscopy confirm that the synthesis of high crystalline MoS2, WS2, and MoTe2 films are successful. The electronic properties of both MoS2 and WS2 exhibit a p-type conduction with relatively high field effect mobility and current on/off ratio. In Chapter 4, vertically-stacked few-layer MoS2/WS2 heterostructures on SiO2/Si and flexible polyethylene terephthalate (PET) substrates is presented. Detailed structural characterizations by Raman spectroscopy and high-resolution/scanning transmission electron microscopy (HRTEM/STEM) show the structural integrity of two distinct 2D TMD layers with atomically sharp van der Waals (vdW) heterointerfaces. Electrical transport measurements of the MoS2/WS2 heterostructure reveal diode-like behavior with current on/off ratio of ~ 104. In Chapter 5, optically uniform and scalable single-layer Mo1-xWxS2 alloys are synthesized by a two-step CVD method followed by a laser thinning. Post laser treatment is presented for etching of few-layer Mo1-xWxS2 alloys down to single-layer alloys. The optical band gap is controlled from 1.871 to 1.971 eV with the variation in the tungsten (W) content, x = 0 to 1. PL and Raman mapping analyses confirm that the laser-thinning of the Mo1-xWxS2 alloys is a self-limiting process caused via heat dissipation to SiO2/Si substrate, resulting in fabrication of spatially uniform single-layer Mo1-xWxS2 alloy films.

Die Art der zwischen den 2D-Materialien und den festen Substraten eingeschlossenen Wasserschichten ist umstritten, sowie auch ihr Einfluss auf die Eigenschaften der 2D-Materialien. In-situ-Rasterkraftmikroskopie (SFM) wurde eingesetzt, um den Benetzungsprozess von Wasser an der Grenzfläche zwischen trockenem graphen- und molybdändisulfid (MoS2)- und Glimmer zu visualisieren. In-situ Raman- und Photolumineszenzmessungen (PL) wurden durchgeführt, um zu untersuchen, wie sich die Ladungsdotierung von Graphen und die Dehnung von Graphen und MoS2 bei der Benetzung verändern. SFM-Ergebnisse zeigen, dass Wassermoleküle, die die trockene Grenzfläche benetzen, bei hoher relativer Luftfeuchtigkeit eine homogene monomolekulare Schicht ausbilden. Aus Raman-Messungen kann man schließen, dass die Wasserschicht vorhandenen Ladungstransfer an der trockenen Grenzfläche blockiert, während eine Schicht aus Ethanolmolekülen dafür nicht ausreicht. Der Austausch von Ethanol gegen Wasser und umgekehrt ermöglicht eine reversible Umschaltung des Ladungstransfers an der Grenzfläche. Dehnungsänderungen von 2D-Materialien auf Glimmer mit eingeschlossenen Flüssigkeitsschichten wird in dieser Arbeit durch Dehnung eines Glimmersubstrats mit darauf exfoliertem 2D-Material untersucht. Die dadurch induzierte Dehnung in Graphen und MoS2 wird durch die Analyse der Veränderungen in den Raman- bzw. PL-Spektren ermittelt. Dabei kann eine Dehnungsrelaxation in Graphen beobachtet werden, die sich von einer „Stick-Slip-Bewegung“ bei trockener Grenzfläche zu viskosem Relaxationsverhalten verändert, wenn Wasser in die Grenzfläche interkaliert. Im Gegensatz dazu findet man in MoS2 unabhängig von der Hydratation keine viskose Relaxation. / The nature of the water layers confined between 2D materials and solid substrates is disputed, also their influences on properties of 2D materials are in debate. I employ In-situ scanning force microscopy (SFM) to visualize wetting of water at the dry graphene-/molybdenum disulfide (MoS2) - mica interface. In-situ Raman and photoluminescence (PL) measurements probe charge-doping and strain change of graphene and MoS2 upon wetting. SFM results show that water molecules wetting the dry interface form a monomolecular layer at high relative humidity (RH). Raman results imply that the water layer blocks charge transfer from mica to graphene, while an ethanol monolayer allows for it. Strain changes of both 2D materials on mica with confined liquid layers are investigated by stretching a mica substrate with the 2D material exfoliated on it. The strain induced in graphene and MoS2 is inferred by analyzing changes in Raman and PL spectra, respectively. Strain relaxation in graphene changes from stick-slip for dry interface to viscous when intercalated by water. In contrast, there is no viscous relaxation in MoS2 regardless of hydration.