This work investigates the fabrication, process optimization, and characterization of cobalt oxide-antimony doped tin oxide (CoO-ATO) nanofibersusing polystyrene (PS) solutions with toluene orD-limonene as solvents. These nanofibers are produced by anelectrospinning process. Nanofibers are fabricated using polymeric solutions of CoO doped ATO and mixtures of PS: D-limonene and PS:toluene. PSis a base aromatic organic polymer, a non-toxic material, and a versatile catalyst for fiber formation. PSsolutions are made by mixing polystyrene beads and D-limonene or toluene at specific weight percentages. These polymeric solutions of PS: D-limonene and PS:toluene are then mixed with CoO-ATO at various weight percentages. The two solutions are electrospun and the best process parameters optimized to obtain nanofibers with limited beading. Process optimization is completed by analyzing how changes in the electrospinningexperimental set up impact nanofiber formation and production efficiency (speed of formation). CoO-ATO nanofibers are characterizedby scanning electron microscopy, hydrophobicity via contact angle measurements, and viscosity measurements. Additional analysis is conducted to evaluate the environmental impact of using two different solvents to fabricate the CoO-ATO nanofibers. In this project, I was able to successfully produce novel nanofiber membranes of CoO-ATOusing two different solvents. These investigations were conducted and nanofiberprocess optimized to provide a technological contribution to future industrial scaleproductions of thermally reflective materials.

Microfluidic technology has been grown rapidly in the past decade. Microfluidics can find wide applications in multiple fields such as medicine, electronics, chemical and biology. Micro-pumping is an essential part of a microfluidic system. This thesis presents the optimization process of AC electro-thermal micropump with respect to the geometry of electrode array and channel height. The thesis first introduces the theories of AC electrokinetic including dielectrophoresis, AC electro-osmosis (ACEO) and AC electro-thermal (ACET). Also presented are the basic theory and governing equations of microfluidics, the continuity equation, the Navier-Stokes equation, and the conservation of energy equation. AC electro-thermal effect results from the interplays between electric field, temperature field and fluid mechanics. Since the governing equations are highly non-linear, numerical simulation is extensively used to understand the effects of factors such as the electrode dimensions and channel height. By interfacing finite element analysis software COMSOL Multiphysics with Matlab, to the simulation model is able to scan the geometry variables so as to find the optimal micropump design. The optimization has been performed with respect to flow rate and power efficiency of the micropump.

Microfluidic technology has been grown rapidly in the past decade. Microfluidics can find wide applications in multiple fields such as medicine, electronics, chemical and biology. Micro-pumping is an essential part of a microfluidic system. This thesis presents the optimization process of AC electro-thermal micropump with respect to the geometry of electrode array and channel height.The thesis first introduces the theories of AC electrokinetic including dielectrophoresis, AC electro-osmosis (ACEO) and AC electro-thermal (ACET). Also presented are the basic theory and governing equations of microfluidics, the continuity equation, the Navier-Stokes equation, and the conservation of energy equation. AC electro-thermal effect results from the interplays between electric field, temperature field and fluid mechanics. Since the governing equations are highly non-linear, numerical simulation is extensively used to understand the effects of factors such as the electrode dimensions and channel height. By interfacing finite element analysis software COMSOL Multiphysics with Matlab, to the simulation model is able to scan the geometry variables so as to find the optimal micropump design. The optimization has been performed with respect to flow rate and power efficiency of the micropump.

A new class of electrodes with nanometer-scale contact spacing can be produced at the edge of patterned metal/insulator/metal this film structures. A key challenge is to produce insulator layers with low leakage current and have pristine metal contacts for controlled molecular contacts. Atomic layer deposition of high quality Al2O3 thin films onto Au electrodes was enabled by surface modification with a self-assembled monolayer of -OH groups that react with a monolayer of trimethylaluminum gas source. Ar ion milling was then used to expose the edge of the Au/dielectric/Au structure for molecular electrode contacts. The junctions are characterized by atomic force microscope and tunnel current properties. The Au/self-assembled monolayer/Al2O3/Au tunnel junction, with a very thin oxide insulator layer (15.4 Å), is stable and has a small tunneling current density of about 0.20 ~ 0.75 A/cm2 at 0.5 V. Organometalic cluster molecules were attached to bridge the electrodes. Through tunnel current modeling, low temperature and photo current measurements, molecular current was found to be consistent with direct tunneling through the organic tethers to available states at the metal center. This novel electrode was also used to study the efficiency of organic conducting thin films where the photovoltaic efficiency can be improved when the electrode separation distance is below the exciton diffusion length. Copper (II) phthalocyanine (CuPc) was thermally evaporated between the nano-gap electrodes formed by Au/Al2O3/Au tunnel junctions. A large photocurrent enhancement over 50 times that of bulk CuPc film was observed when the electrode gap distance approached 10 nm. CuPc diffusion length is seen to be 10 nm consistent with literature reports. All devices show diode I-V properties due to a large Schottky barrier contact resistance between the small top Au electrode and the CuPc film. To add another dimension of nm-scale patterning, nanowires can be used as line-of-sight shadowmasks provided that nanowire location and diameter can be controlled. Lateral ZnO nanowires were selectively grown from the edge of a Si/Al2O3/Si multi-layer structure for potential integration into devices utilizing Si processing technology. Microstructural studies demonstrate a 2-step growth process in which the tip region, with a diameter ~ 10 nm, rapidly grew from the Al2O3 surface. Later a base growth with a diameter ~ 22 nm overgrew the existing narrow ZnO nanowire halting further tip growth. Kinetics studies showed surface diffusion on the alumina seed surface determined ZnO nanowire growth rate.

Interest in controlling the synthesis of silver nanoparticles in colloidal solutions has increased during the last two decades. There is also growing interest in forming layers of silver nanoparticles on substrates, particularly for surface-enhanced Raman spectroscopy applications. However, methods to grow silver nanoparticles directly on substrates have not been studied extensively, and there are few techniques for controlling the size, shape, density, and location of the particles. This work presents a simple and reliable method to photodeposit silver nanoparticles onto transparent substrates. The size, shape and deposition density of the nanoparticles are influenced by the precursor solution, light intensity, and surface modification of the substrate. This allows control of the optical and electrical properties of the nanoparticle films. Furthermore, the particles can be patterned using direct laser exposure, scanning probe methods, and electron-beam lithography. Applications and advantages of this deposition method are proposed and explored.

Membrane process including microfiltration (MF), ultrafiltration (UF), nanofiltration (NF) and reverse osmosis (RO) have provided numerous successful applications ranging from drinking water purification, wastewater treatment, to material recovery. The addition of functional moiety in the membranes pores allows such membranes to be used in challenging areas including tunable separations, toxic metal capture, and catalysis. In this work, polyvinylidene fluoride (PVDF) MF membrane was functionalized with temperature responsive (poly(N-isopropylacrylamide), PNIPAAm) and pH responsive (polyacrylic acid, PAA) polymers. It’s revealed that the permeation of various molecules (water, salt and dextran) through the membrane can be thermally or pH controlled. The introduction of PAA as a polyelectrolyte offers an excellent platform for the immobilization of metal nanoparticles (NPs) applied for degradation of toxic chlorinated organics with significantly increased longevity and stability. The advantage of using temperature and pH responsive polymers/hydrogels also includes the high reactivity and effectiveness in dechlorination. Further advancement on the PVDF functionalization involved the alkaline treatment to create partially defluorinated membrane (Def-PVDF) with conjugated double bounds allowing for the covalent attachment of different polymers. The PAA-Def-PVDF membrane shows pH responsive behavior on both the hydraulic permeability and solute retention. The sponge-like PVDF (SPVDF) membranes by phase inversion were developed through casting PVDF solution on polyester backing. The SPVDF membrane was demonstrated to have 4 times more surface area than commercial PVDF MF membrane, allowing for enhanced nanoparticles loading for chloro-organics degradation. The advanced functionalization method and process were also validated to be able to be scaled-up through the evaluation of full-scale functionalized membrane provided by Ultura Inc. California, USA. Nanofiltration (NF) between UF and RO presents selectivity controlled by both steric and electrostatic repulsions, which are widely used to reject charged species, particularly multivalent ions. In this work, selective permeation of CaCl2 and high sucrose retention are obtained through the modification of nanofiltration membranes with lower charge compared to commercial nanofiltration membrane. The membrane module also shows high stability with constant water permeability in a long-term (two months) test. Extended Nernst-Planck equation were further used to evaluate the experimental results and it fits well.

This thesis is based on promising computing paradigm of reversible logic which generates unique outputs out of the inputs and. Reversible logic circuits maintain one-to-one mapping inside of the inputs and the outputs. Compared to the traditional irreversible computation, reversible logic circuit has the advantage that it successfully avoids the information loss during computations. Also, reversible logic is useful to design ultra-low-power nanocomputing circuits, circuits for quantum computing, and the nanocircuits that are testable in nature. Reversible computing circuits require the ancilla inputs and the garbage outputs. Ancilla input is the constant input in reversible circuits. Garbage output is the output for maintaining the reversibility of the reversible logic but is not any of the primary inputs nor a useful bit. An efficient reversible circuit will have the minimal number of garbage and ancilla bits. Barrel shifter is one of main computing systems having applications in high speed digital signal processing, oating-point arithmetic, FPGA, and Center Processing Unit (CPU). It can operate the function of shifting or rotation for multiple bits in only one clock cycle. The goal of this thesis is to design barrel shifters based on the reversible computing that are optimized in terms of the number of ancilla and garbage bits. In order to achieve this goal, a new Super Conservative Reversible Logic Gate (SCRL gate) has been used. The SCRL gate has 1 control input depending on the value of which it can swap any two n-1 data inputs. We proved that the SCRL gate is superior to the existing conservative reversible Fredkin gate. This thesis develops 5 design methodologies for reversible barrel shifters using SCRL gates that are primarily optimized with the criteria of the number of ancilla and garbage bits. The five proposed methodologies consist of reversible right rotator, reversible logical right shifter, reversible arithmetic right shifter, reversible universal right shifter and reversible universal bidirectional shifter. The proposed reversible barrel shifter design is compared with the existing works in literature and have shown improvement ranging from 8.5% to 92% by the number of garbage and ancilla bits. The SCRL gate and design methodologies of reversible barrel shifter are mapped in Quantum Dot Cellular Automata (QCA) computing. It is illustrated that the SCRL-based designs of reversible barrel shifters have less QCA cost (cost in terms of number of inverters and majority voters) compared to the Fredkin gate- based designs of reversible barrel shifters.

The evolution of the MOSFET technology has been driven by the aggressive shrinkage of the device size to improve the device performance and to increase the circuit density. Currently, many research demonstrated that the continuous polycrystalline silicon film in the floating-gate dielectric could be replaced with nanocrystal (nc) embedded high-k thin film to minimize the charge loss due to the defective thin tunnel dielectric layer. This research deals with both the statistical aspect of reliability and electrical aspect of reliability characterization as well. In this study, the Zr-doped HfO2 (ZrHfO) high-k MOS capacitors, which separately contain the nanocrystalline zinc oxide (nc-ZnO), silicon (nc-Si), Indium Tin Oxide (nc-ITO) and ruthenium (nc-Ru) are studied on their memory properties, charge transportation mechanism, ramp-relax test, accelerated life tests, failure rate estimation and thermal effect on the above reliability properties. C-V hysteresis result show that the amount of charges trapped in nanocrystal embedded films is in the order of nc-ZnO>nc-Ru>nc-Si~nc-ITO, which might probably be influenced by the EOT of each sample. In addition, all the results show that the nc-ZnO embedded ZrHfO non-volatile memory capacitor has the best memory property and reliability. In this study, the optimal burn-in time for this kind of device has been also investigated with nonparametric Bayesian analysis. The results show the optimal burn-in period for nc-ZnO embedded high-k device is 5470s with the maximum one-year mission reliability.

As the world faces an energy crisis with depleting fossil fuel reserves, alternate energy sources are being researched ever more seriously. In addition to renewable energy sources, energy recycling and energy scavenging technologies are also gaining importance. Technologies are being developed to scavenge energy from ambient sources such as vibration, radio frequency and low grade waste heat, etc. Waste heat is the most common form of wasted energy and is the greatest potential source of energy scavenging. Pyroelectricity is the property of some materials to change the surface charge distribution with the change in temperature. These materials produce current as temperature varies in them and can be utilized to convert thermal energy to electrical energy. In this work a novel approach to vary temperature in pyroelectric material to convert energy has been investigated. Microelectromechanical Systems or MEMS is the new technology trend that takes advantage of unique physical properties at micro scale to create mechanical systems with electrical interface using available microelectronic fabrication techniques. MEMS can accomplish functionalities that are otherwise impossible or inefficient with macroscale technologies. The energy harvesting device modeled and developed for this work takes full benefit of MEMS technology to cycle temperature in an embedded pyroelectric material to convert thermal energy from low grade waste heat to electrical energy. Use of MEMS enables improved performance and efficiency and overcomes problems plaguing previous attempts at pyroelectric energy conversion. A Numerical model provides accurate prediction of MEMS performance and sets design criteria, while physics based analytical model simplifies design steps. A SPICE model of the MEMS device incorporates electrical conversion and enables electrical interfacing for current extraction and energy storage. Experimental results provide practical implementation steps towards of the modeled device. Under ideal condition the proposed device promises to generate energy density of 400 W/L.

The outstanding electrical and material properties of Graphene have made it a promising material for several fields of analog applications, though its zero bandgap precludes its application in digital and logic devices. With its remarkably high electron mobility at room temperature, Graphene also has strong potential for terahertz (THz) plasmonic devices. However there still are challenges to be solved to realize Graphene’s full potential for practical applications. In this dissertation, we investigate solutions for some of these challenges. First, to reduce the access resistances which significantly reduces the radio frequency (RF) performance of Graphene field effect transistors (GFETs), a novel device structure consisting of two additional contacts at the access region has been successfully modeled, designed, microfabicated/integrated, and characterized. The additional contacts of the proposed device are capacitively coupled to the device channel and independently biased, that induce more carriers and effectively reduce access resistance. In addition to that, in this dissertation, bandgap has been experimentally introduced to semi-metallic Graphene, by decorating with randomly distributed gold nano-particles and zinc oxide (ZnO) nano-seeds, where their interaction breaks its sublattice symmetry and opens up bandgap. The engineered bandgap was extracted from its temperature dependent conductivity characteristics and compared with reported theoretical estimation. The proposed method of device engineering combined with material bandgap engineering, on a single device, introduces a gateway towards high speed Graphene logic devices. Finally, THz plasmon generation and propagation in Graphene grating gate field effect transistors and Graphene plasmonic ring resonators have been investigated analytically and numerically to explore their potential use for compact, solid state tunable THz detectors.