<p>This thesis describes the synthesis, structure, equilibriaand other properties of novel thallium(III) monomeric andplatinum-bonded complexes with nitrogen donor ligandsethylenediamine, diethylenetriamine, triethylenetetramine,porphyrin, 2,2'-bipyridine and 1,10-phenanthroline in solutionand in solid.</p><p>The existence of three complexes withthe general formula[Tl(en)_n]³⁺(n = 1-3) and their overall stability constantshave been established in pyridine. All three complexes wereidentified by their²⁰⁵Tl and¹H NMR chemical shifts and²⁰⁵Tl-¹H coupling constants. The formation process of thecomplexes was followed by¹H NMR spectroscopy. The crystal structure of[Tl(en)₃](ClO₄)₃was determined; the thallium(III) ion isN-coordinated in a distorted octahedral geometry. Two [Tl(dien)_n]³⁺(n = 1-2) complexes were proved to exist insolution and the structure of the bis-complex [Tl(dien)₂]²⁺in<i>u-facial</i>isomers was determined in solid. In addition,crystal structures of [Tl(en)₂CN](ClO₄)₂with cyanide bridging between two Tl(en)₂units forming an infinite chain structure and of[Tl(tren)₂(CN)₂](ClO₄) with a distorted pseudo-octahedral coordinationaround thallium were determined. Thallium(III) complexes with2,2'-bipyridine and 1,10-phenanthroline have been studied inDMSO using²⁰⁵Tl,¹³C and¹H NMR spectroscopy. In addition, aseven-coordinated thallium was found in the crystal structureof [Tl(bipy)₃(dmso)](ClO₄)₃, and six-coordinated thallium in pseudo-octahedralgeometry in [Tl(phen)₂Cl₂](ClO₄).</p><p>The solvated complex [Tl(dmso)₆]³⁺has been prepared using concentrated aqueoussolution of Tl(ClO₄)₃by a solvent replacement reaction in DMSO, and thewater-free solid compound [Tl(dmso)₆](ClO₄)₃was crystallized from DMSO. The structure of thecomplex [Tl(dmso)₆]³⁺is a regular octahedron with the Tl-O bonddistance 2.224(3) Å. It represents an easy and secure wayto introduce water-free Tl(III) into organic phase withoutreduction.</p><p>Through several reactions, novel heteronuclear Pt-Tlcomplexes with the composition [(NC)₅Pt-Tl(tpp)]^2-, [(NC)₅Pt-Tl(thpp)]^2-, [(NC)₅Pt-Tl(bipy)_n](n = 1-2), [(NC)₅Pt-Tl(en)_n-1](n = 1-3) and [(NC)₅Pt-Tl(phen)_n](n = 1-2), have been synthesized in solution.Multinuclear NMR (¹⁹⁵Pt,²⁰⁵Tl,¹³C and¹H), Raman spectroscopy and X-ray diffraction dataare fully compatible with formation of unsupported Pt-Tl bondedcomplexes both in solution and in solid. The huge¹J(¹⁹⁵Pt-²⁰⁵Tl) spin-spin coupling constants (48-66 kHz) wereobserved by both¹⁹⁵Pt and²⁰⁵Tl NMR spectroscopy in solution and they providea strong evidence of formation of the Pt-Tl bond in solution.In all six determined crystal structures of the Pt-Tl compoundsa very short Pt-Tl bond is found with distances2.6117(5)-2.6375(5) Å. The calculated values of Pt-Tlforce constants (1.38-1.91 N/cm) are characteristic for asingle metal-metal bond.</p><p>In the Pt-Tl compounds, the oxidation state of the metalions is intermediate between the stable states Pt^II/Pt^IVand Tl^III/Tl^I, respectively, and this is reflected by their¹⁹⁵Pt and²⁰⁵Tl chemical shifts. It turns out that N-donorligands can really stabilize the Pt-Tl bond both in solutionand in solid. The character of the metal-metal bond anditstheoretical basis are discussed.</p><p><b>Keywords:</b>Thallium, Platinum, Cyanide, N-donor ligand,Metal-metal bond, Multinuclear NMR, Raman spectroscopy, X-raydiffraction, Equilibrium, Spin-spin coupling.</p>

No description available.

The objective of the present work was systematic investigation of water-based headspace single-drop microextraction (SDME) technique, its conjunction with capillary electrophoresis, and application for the analysis of volatile inorganic compounds (cyanide and ammonium) in biomedical and environmental samples. Theoretically evaluated and experimentally confirmed that the manipulation in the volatility of the analyte by its chemical modification in the sample and/or in the acceptor phase is the most effective way to enhance the extraction performance in headspace SDME. Maximum extraction efficiency for cyanide was observed in the pH range 4.5–7.5, where cyanide anion is completely transferred into volatile HCN. Complete cyanide recoveries (≥96%) from metal-cyanide complexes were obtained by using two ligand-exchange reagents (ethylenediamine and dithizone). Maximum extraction efficiency was observed by the extraction of ammonia from alkaline samples (pH≥11) with neutral or slightly acidic acceptor phase (pH 3-7). Compared to existing methods water-based headspace SDME is significantly faster and simpler. In addition, proposed technique does not require any sample pre-treatment (deproteinization, acidic/alkaline distillation, etc.) and thus is much less susceptible to interferences. Finally, it offers possibility to choice of a wider variety of solvents and, consequently, enhances the range of extractable analytes as well as the range of analytical methods that can be coupled... [to full text] / Daktaro disertacijoje nuodugniai ištirtas mikroekstrakcijos iš viršerdvės vandens lašu metodas, apjungtas su kapiliarine elektroforeze bei pritaikytas lakių neorganinių junginių (cianido ir amonio) koncentravimui ir nustatymui biomedicininiuose ir aplinkos objektuose. Teoriniais skaičiavimais parodyta ir eksperimentiškai patvirtinta, kad efektyviausias būdas mikroekstrakcijos iš viršerdvės efektyvumui pagerinti – analitės lakumo didinimas chemiškai modifikuojant ją prieš ekstrakciją ir/arba jos lakumo mažinimas modifikuojant ją akceptorinėje fazėje. Maksimalus cianido mikroekstrakcijos efektyvumas pasiekiamas pH srityje 4,5- 7,5, kur cianidas kiekybiškai pervedamas į lakų HCN. Ištyrus cianido mikroekstrakciją tirpiklio lašu iš metalų cianidinių kompleksų tirpalų nustatyta, kad kiekybiškas silpnai surišto cianido suardymas (cianido išgavos siekia ≥96%) pasiekiamas panaudojus ligandų mainus etilendiamino ir ditizono mišiniu. Maksimalus amonio mikroekstrakcijos efektyvumas pasiekiamas ekstrahuojant jį iš pašarmintų mėginių (pH≥11) akceptorine faze, kurios pH 3-7. Lyginant su standartiniais metodais, siūlomas metodas yra greitesnis ir paprastesnis, visiškai eliminuojama mėginio matricos įtaka, nereikalingos jokios drastiškos (deproteinizacija, veikimas rūgštimis/šarmais, distiliacija ir pan.) manipuliacijos su mėginiu, todėl išvengiama mėginio matricos įtakos. Mikroekstrakcija iš viršerdvės vandens lašu praplečia mikroekstrakcijos metodų taikymo sritis: atveriama galimybė labai... [toliau žr. visą tekstą]

Considerable efforts are being devoted to designing enhanced molecular magnetic materials, in particular single molecule magnets (SMMs) that can meet the requirements for future technologies such as quantum computing and spintronics. A current trend in the field is enhancing the global anisotropy in metal complexes using single-ion anisotropy. The work in this dissertation is devoted to the synthesis and characterization of new building blocks of the highly anisotropic early transition metal ion V(III) with the aim of incorporating them into heterometallic molecular materials. The results underscore the importance of tuning the local coordination environments of metal ions in order to ensure enhanced single ion anisotropy. A family of mononuclear axially distorted vanadium (III) compounds, A[L_(3)VX_(3)] (3-9) (X = F, Cl or Br, A^(+) = Et_(4)N^(+), nBu_(4)N^(+) or PPN^(+) , L_(3) = Tp or Tp* (Tp = tris(-1-pyrazolyl)borohydride), Tp* = tris(3,5-dimethyl-1-pyrazolyl)borohydride)), and [Tp*V(DMF)_(3)](PF_(6))_(2) were studied. Replacement of the Tp ligand in 3 with the stronger π-donor Tp* results in a near doubling of the magnitude of the axial zero-field splitting parameter D_(z) (D_(z) = -16.0 cm^(-1) in 3, and -30.0 cm^(-1) in 4) as determined by magnetic measurements. Such findings support the idea that controlling the axial crystal field distortion is an excellent way to enhance single-ion anisotropy. High Field-High Frequency EPR measurements on 4 revealed an even higher D value, -40.0 cm^(-1). Interestingly, compound 4 exhibits evidence for an out-of-phase ac signal under dc field. In another effort, a new series of vanadium cyanide building blocks, PPN[V(acac)_(2)(CN)_(2)]∙PPNCl (13) (acac = acetylacetonate), A[V(L)(CN)_(2)] (A^(+) = Et_(4)N^(+), L = N,N'-Ethylenebis(salicylimine) (14), A = PPN^(+), L = N,N'-Ethylenebis(salicylimine) (15), L = N,N'-Phenylenebis(salicylimine) (16), and L = N,N'-Ethylenebis(2-methoxysalicylimine) (17)) were synthesized. Magnetic studies revealed moderate Dz values (-10.0, 5.89, 3.7, 4.05 and 4.36 cm^(-1) for 13-17 respectively). The first family of cyanide-bridged lanthanide containing molecules with a trigonal bipyramidal (TBP) geometry, (Et_(4)N)_(2)[(Re(triphos)(CN)_(3))_(2)(Ln(NO_(3))_(3))_(3)]-∙4CH_(3)CN (19-27 with Ln = La, Ce, Pr, Nd, Sm, Gd, Tb, Dy and Ho) were prepared using the [(triphos)Re(CN)_(3)]^(-) building block, results that add valuable information to our database of compounds with a TBP geometry. Magnetic studies revealed diverse magnetic responses including slow relaxation of the magnetization at zero field for 25 and 26 , an indication of SMM behavior.

Although fluoride is used at low concentrations in drinking water as a means of promoting dental health, it poses a danger at high exposure levels where it can lead to skeletal fluorosis or other adverse effects. Cyanide is notoriously toxic, and its large scale use in industrial processes warrants the need for close monitoring to remain aware of potential contamination of water sources and other environmental resources. Based on these considerations, it is critical to continue to develop improved methods of monitoring fluoride and cyanide concentrations in water. However, molecular recognition of these anions in water poses considerable challenges. For fluoride, this is due largely to its high hydration enthalpy (Ho = -504 kJ mol-1), which drastically reduces its reactivity in water. Additionally, the strong basicity of cyanide (pKa of (HCN) = 9.3) may obscure its detection in neutral water due to protonation. In addition to achieving detection of these anions in water, it is most desirable to have information of the detection event relayed in the form of a positive, rather than negative, response (i.e., turn-on vs turn-off). The general strategy of appending cationic groups to triarylboranes imparts beneficial Coulombic, inductive, and sometimes chelate effects that have allowed a number of these Lewis acidic receptors to sense fluoride and cyanide in aqueous environments. With the goal of developing new triarylborane-based receptors that show enhanced affinities for these anions, as well as turn-on responses to detection, a series of pyridinium boranes were synthesized and studied. Having recognized that the inherent Lewis acidity of antimony(V) species might be exploited for anion sensing, we also describe initial studies on the ability of tetraorganostibonium ions (R4Sb+) and cationic transition metal-triarylstibine complexes (R3SbM+) to complex fluoride. Finally, the electropositivity of antimony and its ability to form stable compounds in both the +3 and +5 oxidation states have led us to begin investigations into the bonding and redox reactivity of novel metal stibine/stiborane complexes.

Introduction Since its development by Al Wolf and colleagues in the 1970s1, [11C]cyanide has been a useful synthon for a wide variety of reactions, most notably those producing [1-11C]-labeled amino acids2. However, despite its position as rote gas-phase product, the catalytic synthesis is difficult to optimize and often only perfunctorily dis-cussed in the radiochemical literature. Recently, [11C]CN– has been used in the synthesis of indole-3-[1-11C]acetic acid ([11C]IAA), the principal phytohormone responsible for a wide variety of growth and development functions in plants3. The University of Wisconsin has expertise in cyclotron production and radiochemistry of 11C and previous experience in the PET imaging of plants4,5. In this abstract, we present work on optimizing [11C]CN– production for the synthesis of [11C]IAA and the PET imaging of auxin transport in living plants. Material and Methods [11C]CH4 was produced by irradiating 270 psi of 90% N2, 10% H2 with 30 µA of 16.1 MeV protons from a GE PETtrace cyclotron. After irradiation, the [11C]CH4 was converted to [11C]CN– by passing through a quartz tube containing 3.0 g of Pt wire and powder between quartz wool frits inside a 800–1000 ˚C Carbolite tube furnace. The constituents and flow rate of the [11C]CH4 carrier gas were varied in an effort to optimize the oven\'s catalytic production of [11C]CN– from CH4 and NH3. The following conditions were investigated: i. Directly flowing irradiated target gas versus trapping, purging and releasing [11C]CH4 from a −178 ˚C HayeSep D column in He through the Pt furnace. ii. Varying the amount of anhydrous NH3 (99.995%) mixed with the [11C]CH4 carrier gas prior to the Pt furnace. Amounts varied from zero to 35 % of gas flow. iii. Varying the purity of the added NH3 gas with the addition of a hydride gas purifier (Entegris model 35KF), reducing O2 and H2O impurities to < 12 ppb. iv. Varying the flow rate of He gas carrying trapped, purged and released [11C]CH4. After flowing through the Pt furnace, the gas stream was bubbled through 300 µL of DMSO containing IAA precursor gramine (1 mg), then passed through a 60×5 cm column containing ascarite to absorb [11C]CO2, followed by a −178˚C Porapak Q column to trap [11C]CH4 and [11C]CO. After bubbling, the DMSO/gramine vial was heated to 140 ˚C to react the gramine with [11C]CN–, forming the intermediate indole-3-[1-11C]acetonitrile ([11C]IAN), which was subsequently purified by solid phase extraction (SPE). The reaction mixture was diluted into 20 mL water and loaded onto a Waters Sep-Pak light C18 cartridge, followed by rinsing with 5 mL of 0.1% HCl : acetonitrile (99 : 1) and 10 mL of the same mixture in ratio 95 : 5, and finally eluted with 0.5 mL of diethyl ether. The ether was subsequently evaporated under argon flow, followed by the hydrolysis of [11C]IAN to [11C]IAA with the addition of 300 µL 1 M NaOH and heating to 140 ˚C for 5 minutes. After hydrolysis, the solution was neutralized with 300 µL 1 M HCl and purified using preparative high-performance liquid chromatography (HPLC) using a Phenomenex Luna C18 (10μ, 250×10mm) column with a mobile phase acetonitrile : 0.1% formic acid in H2O (35 : 65) at flow rate of 3 mL/min. The [11C]IAA peak, eluting at 12 minutes, was collected and rotary evaporated to dryness, then again after the addition of 5 mL acetonitrile, followed by its reconstitution in 50 µL of water. Analytical HPLC was performed on the [11C]IAA before and after this evaporation procedure using a Phenomenex Kinetex C18 (2.6μ, 75× 4.6 mm) column with a linear gradient elution over 20 minutes of 10 : 90–30 : 70 (acetonitrile : 0.1% formic acid) at a 1 mL/min flow rate, eluting at 7.6 minutes. The transport of [11C]IAA was monitored following administration through the severed petiole of rapid cycling Brassica oleracea (rcBo) using a Siemens microPET P4 scanner. Transport was compared following administration to the first true leaf versus the final fully formed leaf in plants with and without exposure to the polar auxin transport inhibitor naphthylphthalamic acid (NPA). Results and Conclusion Optimization of the [11C]CN– gas phase chemistry was performed using two key metrics for measuring conversion yield. First is the fraction of total produced radioactivity that trapped in the DMSO/gramine solution (denoted %DMSO), and second, the fraction of DMSO/gramine-trapped activity that was able to react with gramine to form [11C]IAN (denoted %CN–). Under certain conditions, the former of these metrics experienced significant losses due to unconverted [11C]CH4 or through combustion, forming [11C]CO2 or [11C]CO. The latter metric experienced losses due to production of incomplete oxidation products of the CH4-NH3 reaction, such as methylamine. Total [11C]CH4 to [11C]CN– con-version yields is reported by the product of the two metrics. It was initially hypothesized that the irradiation of a 90% N2, 10% H2 target gas would produce sufficient in-target-hot-atom-produced NH3 to convert [11C]CH4 to [11C]CN– in the Pt furnace. However, conversion yields were found to be low and highly variable, with 13 ± 8 % trapping in DMSO/gramine, 9 ± 9 % of which reacted as CN– (n = 15). While in disagreement with previous reports1, this is likely as a result the batch irradiation conditions resulting ammonia losses in the target chamber and along the tubing walls. Yields and reproducibility were improved when combining the target gas with a stream of anhydrous NH3 gas flow with conversion yields reported in TABLE 1. However, these yields remained undesirably low, potentially as a result of the 10% H2 carrier gas having an adverse effect on the oxidative conversion of [11C]CH4 to [11C]CN–. To remedy this, the irradiated target gas was trapped, purged, released in He and combined with NH3 gas before flowing through the Pt furnace. Initial experiments using 99.995% anhydrous NH3 gas resulted in very poor (< 0.1%) [11C]CN– yields as a result of nearly quantitative combustion forming [11C]CO2. Installation of a hydride gas purifier to reduce O2 and H2O impurities in NH3 improved yields for CH4 in He, but did not significantly affect those from [11C]CH4 in N2/H2 target gas. In disagreement with previous reports2, conversion yields were found to be highly sensitive to overall carrier gas flow rate, with lower flow rates giving the best yields, as shown in TABLE 1. Optimization experiments are continuing. The total decay-corrected yield for the 1 hour synthesis of [11C]IAA in 50 µL of water is 2.3 ± 0.7 %, based on the total produced [11C]CH4 with a specific activity ranging from 1–100 GBq/µmol. The principal radiochemical impurity was determined to be indole-3-carboxylic acid. The SPE procedure isolating the [11C]IAN intermediate product was optimized to minimize this impurity in the final sample. After a rapid distribution of the administered [11C]IAA through the cut petiole and throughout the rcBO plant, upward vascular transport of auxin and downward polar auxin transport was visualized through time-activity curves (TACs) of regions of interest along the shoot. Comparison of these TACS with and without exposure to NPA yields insight into the fundamental physiological process of polar auxin transport in plants. In conclusion, the Pt-catalyzed oxidative conversion of [11C]CH4 and NH3 to [11C]CN– is a challenging process to optimize and highly sensitive to carrier gas composition and flow rate. Optimization for our experimental conditions yielded several results which disagreed with previous reports. [11C]IAA produced using [11C]CN– is well suited for PET imaging of polar auxin transport in living plants.

Guld är ett grundämne och den bästa elektriska ledaren i tekniska apparater. Denna studie utvärderar vilka effekter guldbrytningen har på människors hälsa och miljö. Studien behandlar tre länder och hur de har påverkats av guldföretagen som opererar i respektive land. Det har framkommit att cyanid och kvicksilver har förödande effekter för människors hälsa i både Peru och Kongo. Problemet är att arbetsnormer och säkerhetsrutiner inte efterlevs. Sjukdomar som drabbat folk i Peru är bl.a. förlamning, leukemi, huvudvärk, utslag med mera. Dessa sjukdomar orsakades av en kvicksilverolycka. I Kongo utsätts arbetarna dagligen för kontakt med kvicksilver. Mark, vattendrag och grundvatten har blivit påverkade cyanid och kvicksilver. Gruvan i Sverige använder sig istället av kemikalien danafloat507 som är biologiskt nedbrytbar. Den kalkrika avfallsprodukten har haft positiv effekt på fisk och växter i det omgivande vattendrag. / Gold is a chemical element and the best electrical conductor in technological devices. This study shows the impact that gold mining has on health and the environment. The study addresses three countries and how they have been affected by gold companies operating in each country. It has turned out that cyanide and mercury have devastating effects on the health of humans in both Peru and Congo. The problem is that labor standards and safety procedures are not adhered to. Diseases affecting people in Peru are paralysis, leukemia, headaches, rashes etc. This was due to a mercury accident. In Congo workers are daily exposed to mercury.  Soil, rivers and groundwater has been affected by cyanide and mercury. A goldmine in Sweden is instead using danafloat507 a chemical that is biodegradable. The water from the mine is hence rich in lime and it has a positive effect on fish and plants.

The marine aquarium trade has played an important role in shaping the ecological state of coral reefs in Indonesia and much of the Asia-Pacific. The use of cyanide by ornamental fishers in Buleleng District, Bali, in the 1980s and 1990s has resulted in a precipitous decline in the ecological health of reefs. Cyanide-free harvesting techniques were introduced after 2000, along with reef restoration measures. This thesis examines social and ecological processes in the fishing village of Les, Bali, in ending the use of cyanide and the resulting ecological restoration. An emphasis on conservation-development (with livelihood objectives) was important in securing interest and cooperation across stakeholder groups. Adaptive approaches to governance and knowledge co-production were also important. The strategy used at Les is now being exported to other communities across Indonesia, and provides a promising example of a marine resources-based conservation-development initiative that may be implemented at other, similar communities.

The marine aquarium trade has played an important role in shaping the ecological state of coral reefs in Indonesia and much of the Asia-Pacific. The use of cyanide by ornamental fishers in Buleleng District, Bali, in the 1980s and 1990s has resulted in a precipitous decline in the ecological health of reefs. Cyanide-free harvesting techniques were introduced after 2000, along with reef restoration measures. This thesis examines social and ecological processes in the fishing village of Les, Bali, in ending the use of cyanide and the resulting ecological restoration. An emphasis on conservation-development (with livelihood objectives) was important in securing interest and cooperation across stakeholder groups. Adaptive approaches to governance and knowledge co-production were also important. The strategy used at Les is now being exported to other communities across Indonesia, and provides a promising example of a marine resources-based conservation-development initiative that may be implemented at other, similar communities.

Thesis (M.P.H.)--University of Michigan, 1944. / Cover title: The effect of certain industrial wastes on anaerobic decomposition.