MODEL OF ERROR COVARIANCES FOR THE ASSIMILATION OF RADAR REFLECTIVITY INTO NWP MODEL Predicting events with a severe convection is not easy due to the small spatial scale and rapid development of this phenomenon. But being able to predict such events is important in view of the dangerous phenomena that accompany these events, such as flash floods, strong winds, hailstorms or atmospheric electricity. Improved forecast can be achieved by more precisely defined initial conditions that enter the model. These data must match the scale of the studied phenomenon. Therefore, radar data is used in this case. Although the NWP model should describe real processes due to the simplifications and approximations the model's behavior does not entirely correspond the reality. Therefore, if we want the model to generate precipitation, we must ensure that the values of the model variables and their relationship are such that the process is started. To find out these relationships, we want to use a covariant model. In this paper, we focused on the correlation analysis of the model variables in the regions of convection between radar reflection, its conversion to the intensity of precipitation and other model variables. The COSMO data with a horizontal resolution of 2.8 km were used, which were describing approximately...

Built-up areas represent an artifiial impait to natural environment with large spatial variability and speiifi meihaniit radiationt thermal and ihemiial properties. Despite of inireasing horizontal resolution of numeriial weather prediition modelst the impait of loial built-up area on mesosynoptiv weather phenomena is still not well resolved. Therefore it is neiessary to use some of urban environment modelst whiih were designed to parameterize speiifi urban prosiessest not expliiitly resolved inside the grid box. In the thesis main urban iharaiteristiis are explained (impait on the struiture of boundary layert radiation and heat balanie of urban environment or urban heat island)t basii priniiples of urbanization appliiation in the numeriial weather model are desiribedt as well as different urban parameterizations available in numeriial model WRFe (Weather Reseaih and Feoreiasting). Number of validation experiments were performed for summer and winter episode in non-hydrostatii mode at 3t3 km resolutiont where different urban parametrizationst antropogenii heat adjustment and impait of mosaii land-use were tested. April 2018 Prague weather foreiast was verifiated in ionsideration of urban heat island.

The use of numerical weather prediction (NWP) has brought significant improvements to severe weather outbreak forecasting; however, determination of the primary mode of severe weather (in particular tornadic and nontornadic outbreaks) continues to be a challenge. Uncertainty in model runs contributes to forecasting difficulty; therefore it is beneficial to a forecaster to understand the sources and magnitude of uncertainty in a severe weather forecast. This research examines the impact of data assimilation, microphysics parameterizations, and planetary boundary layer (PBL) physics parameterizations on severe weather forecast accuracy and model variability, both at a mesoscale and synoptic-scale level. NWP model simulations of twenty United States tornadic and twenty nontornadic outbreaks are generated. In the first research phase, each case is modeled with three different modes of data assimilation and a control. In the second phase, each event is modeled with 15 combinations of physics parameterizations: five microphysics and three PBL, all of which were designed to perform well in convective weather situations. A learning machine technique known as a support vector machine (SVM) is used to predict outbreak mode for each run for both the data assimilated model simulations and the different parameterization simulations. Parameters determined to be significant for outbreak discrimination are extracted from the model simulations and input to the SVM, which issues a diagnosis of outbreak type (tornadic or nontornadic) for each model run. In the third phase, standard synoptic parameters are extracted from the model simulations and a k-means cluster analysis is performed on tornadic and nontornadic outbreak data sets to generate synoptically distinct clusters representing atmospheric conditions found in each type of outbreak. Variations among the synoptic features in each cluster are examined across the varied physics parameterization and data assimilation runs. Phase I found that conventional and HIRS-4 radiance assimilation performs best of all examined assimilation variations by lowering false alarm ratios relative to other runs. Phase II found that the selection of PBL physics produces greater spread in the SVM classification ability. Phase III found that data assimilation generates greater model changes in the strength of synoptic-scale features than either microphysics or PBL physics parameterization.

The primary goal of this research is to evaluate and identify proper calibration approaches, skillful hydrological models, and suitable weather forecast inputs to improve the accuracy and reliability of hydrological forecasting in different types of watersheds. The research started by formulating an approach that examined single- and multi-site, and single- and multi-objective optimization methods for calibrating an event-based hydrological model to improve flood prediction in a semi-urban catchment. Then it assessed whether reservoir inflow in a large complex watershed could be accurately and reliably forecasted by simple lumped, medium-level distributed, or advanced land-surface based hydrological models. Then it is followed by a comparison of multiple combinations of hydrological models and weather forecast inputs to identify the best possible model-input integration for an enhanced short-range flood forecasting in a semi-urban catchment. In the end, Numerical Weather Predictions (NWPs) with different spatial and temporal resolutions were evaluated across Canada’s varied geographical environments to find candidate precipitation input products for improved flood forecasting. Results indicated that aggregating the objective functions across multiple sites into a single objective function provided better representative parameter sets of a semi-distributed hydrological model for an enhanced peak flow simulation. Proficient lumped hydrological models with proper forecast inputs appeared to show better hydrological forecast performance than distributed and land-surface models in two distinct watersheds. For example, forcing the simple lumped model (SACSMA) with bias-corrected ensemble inputs offered a reliable reservoir inflow forecast in a sizeable complex Prairie watershed; and a combination of the lumped model (MACHBV) with the high-resolution weather forecast input (HRDPS) provided skillful and economically viable short-term flood forecasts in a small semi-urban catchment. The comprehensive verification has identified low-resolution NWPs (GEFSv2 and GFS) over Western and Central parts of Canada and high-resolution NWPs (HRRR and HRDPS) in Southern Ontario regions that have a promising potential for forecasting the timing, intensity, and volume of floods. / Thesis / Doctor of Philosophy (PhD) / Accurate hydrological models and inputs play essential roles in creating a successful flood forecasting and early warning system. The main objective of this research is to identify adequately calibrated hydrological models and skillful weather forecast inputs to improve the accuracy of hydrological forecasting in various watershed landscapes. The key contributions include: (1) A finding that a combination of efficient optimization tools with a series of calibration steps is essential in obtaining representative parameters sets of hydrological models; (2) Simple lumped hydrological models, if used appropriately, can provide accurate and reliable hydrological forecasts in different watershed types, besides being computationally efficient; and (3) Candidate weather forecast products identified in Canada’s diverse geographical regions can be used as inputs to hydrological models for improved flood forecasting. The findings from this thesis are expected to benefit hydrological forecasting centers and researchers working on model and input improvements.

Simulations and modeling of large-scale systems are vital to understanding real world phenomena. However, even advanced numerical models can only approximate the true physics. The discrepancy between model results and nature can be attributed to different sources of uncertainty including the parameters of the model, input data, or some missing physics that is not included in the model due to a lack of knowledge or high computational costs. Uncertainty reduction approaches seek to improve the model accuracy by decreasing the overall uncertainties in models. Aiming to contribute to this area, this study explores uncertainty quantification and reduction approaches for complex physical problems. This study proposes several novel probabilistic and statistical approaches for identifying the sources of uncertainty, modeling the errors, and reducing uncertainty to improve the model predictions for large-scale simulations. We explore different computational models. The first class of models studied herein are inherently stochastic, and numerical approximations suffer from stability and accuracy issues. The second class of models are partial differential equations, which capture the laws of mathematical physics; however, they only approximate a more complex reality, and have uncertainties due to missing dynamics which is not captured by the models. The third class are low-fidelity models, which are fast approximations of very expensive high-fidelity models. The reduced-order models have uncertainty due to loss of information in the dimension reduction process. We also consider uncertainty analysis in the data assimilation framework, specifically for ensemble based methods where the effect of sampling errors is alleviated by localization. Finally, we study the uncertainty in numerical weather prediction models coming from approximate descriptions of physical processes. / Ph. D.

Approved for public release; distribution in unlimited. / On day five of combat operations during Operation IRAQI FREEDOM, advances by coalition forces were nearly halted by a dust storm, initiated by the passage of a synoptically driven cold front. This storm impacted ground and air operations across the entire Area of Responsibility, and delayed an impending ground attack on the Iraqi capital. Military meteorologists were able to assist military planners in mitigating at least some of the effects of this storm. This thesis examines the synoptic conditions leading to the severe dust storm, evaluates the numerical weather prediction model performance in predicting the event, and reviews metrics pertaining to the overall impacts on the Operation IRAQI FREEDOM combined air campaign. In general, the numerical model guidance correctly predicted the location and onset of the dust storms on 25 March, 2003. As a result of this forecast guidance, mission planners were able to front load Air Tasking Orders with extra sorties prior to the onset of the dust storm, and were able to make changes to planned weapons loads, favoring GPS-guided munitions. / Captain, United States Air Force

Screen level temperature is measured at 2 meters above the ground. It is one of the most used atmospheric characteristics in various applications in meteorology and other fields related to weather prediction. Essential is not only the knowledge of its current state, but also its prediction. It is forecasted by numerical weather prediction (NWP) models from the atmospheric current state. Its long-term characteristics can be obtained from the integration of climate models. This text discusses fundamental parametriza- tions, mostly related to temperature forecast, used in the NWP model ALADIN and the regional climate model RegCM. Physical processes which influence temperature are studied using ALADIN in several cases which include the presence of low cloudiness, gravity waves and inappropriate thermic coefficient. A detailed description of the most relevant parametrization schemes is given and the results are studied in a form of indi- vidual feedback loops. Most dominant processes are also found. However, the level of 2 meters above the ground is not the model level, so temperature at 2 meters is obtained by interpolation from the surface temperature and the lowest model level temperature. Using RegCM, two differently complex interpolation schemes are compared to each other. 1

This research was aimed to evaluate the possibility of using satellite precipitation products (SPPs) and Numerical Weather Prediction (NWP) of precipitation for better hydrologic simulations and flood forecasting in the trans-boundary Chenab River Basin (CRB) in Pakistan. This research was divided into three parts. In the first part, two renowned SPPs, i.e., global precipitation mission (GPM) IMERG-F v6 and tropical rainfall measuring mission (TRMM) 3B42 v7, were incorporated in a semidistributed hydrological model, i.e., the soil and water assessment tool (SWAT), to assess the daily and monthly runoff pattern in Chenab River at the Marala Barrage gauging site in Pakistan. The results exhibit higher correlation between observed and simulated discharges at monthly timescale simulations rather than daily timescale simulations. Moreover, results show that IMERG-F is superior to 3B42 by indicating higher R2, higher Nash–Sutcliffe efficiency (NSE), and lower percent bias (PBIAS) at both monthly and daily timescale. In the second part, three latest half-hourly (HH) and daily (D) SPPs, i.e., 'IMERG-E', 'IMERGL', and 'IMERG-F', were evaluated for daily and monthly flow simulations in the SWAT model. The study revealed that monthly flow simulation performance is better than daily flow simulation in all sub-daily and daily SPPs-based models. Results depict that IMERGHHF and IMERG-DF yield the best performance among the other latency levels of SPPs. However, the IMERG-HHF based model has a reasonably higher daily correlation coefficient (R) and lower daily root mean square error (RMSE) than IMERG-DF. IMERG-HHF displays the lowest PBIAS for daily and monthly flow validations and it also represents relatively higher values of R2 and NSE than any other model for daily and monthly model validation. Moreover, the sub-daily IMERG based model outperformed the daily IMERG based model for all calibration and validation scenarios. IMERG-DL based model demonstrates poor performance among all of the SPPs, in daily and monthly flow validation, with low R2, low NSE, and high PBIAS. Additionally, the IMERG-HHE model outperformed IMERG-HHL. In the third and last part of this research, coupled hydro-meteorological precipitation information was used to forecast the 2016 flood event in the Chenab River Basin. The gaugecalibrated SPP, i.e., Global Satellite Mapping of Precipitation (GSMaP_Gauge), was selected to calibrate the Integrated Flood Analysis System (IFAS) model for the 2016 flood event. Precipitation from the Global Forecast System (GFS) NWP, with nine different lead times up to 4 days, was used in the calibrated IFAS model. This study revealed that the hydrologic simulations in IFAS, with global GFS forecasts, were unable to predict the flood peak for all lead times. Later, the Weather Research and Forecasting (WRF) model was used to downscale the precipitation forecasts with one-way and two-way nesting approaches. It was found in this study that the simulated hydrographs in the IFAS model, at different lead times, from the precipitation of two-way WRF nesting exhibited superior performance with the highest R2, NSE and the lowest PBIAS compared with one-way nesting. Moreover, it was concluded that the combination of GFS forecast and two-way WRF nesting can provide high-quality precipitation prediction to simulate flood hydrographs with a remarkable lead time of 96 h when applying coupled hydrometeorological flow simulation.

Water is essential for human well-being and healthy ecosystems, but population growth and changes in climate and land-use are putting increased stress on water resources in many regions. To ensure water security, knowledge about the spatiotemporal distribution of these resources is of great importance. However, estimates of global water resources are constrained by limitations in availability and quality of data. This thesis explores the quality of both observational and modelled data, gives an overview of models used for large-scale hydrological modelling, and explores the possibilities to deal with the scarcity of data by prediction of flow-duration curves. The evaluation of the quality of observational data for large-scale hydrological modelling was based on both hydrographic data, and model forcing and evaluation data for basins worldwide. The results showed that a GIS polygon dataset outperformed all gridded hydrographic products analysed in terms of representation of basin areas. Through a screening methodology based on the long-term water-balance equation it was shown that as many as 8–43% of the basins analysed displayed inconsistencies between forcing (precipitation and potential evaporation) and evaluation (discharge) data depending on how datasets were combined. These data could prove disinformative in hydrological model inference and analysis. The quality of key hydrological variables from a numerical weather prediction model was assessed by benchmarking against observational datasets and by analysis of the internal land-surface water budgets of several different model setups. Long-term imbalances were found between precipitation and evaporation on the global scale and between precipitation, evaporation and runoff on both cell and basin scales. These imbalances were mainly attributed to the data assimilation system in which soil moisture is used as a nudge factor to improve weather forecasts. Regionalisation, i.e. transfer of information from data-rich areas to data-sparse areas, is a necessity in hydrology because of a lack of observed data in many areas. In this thesis, the possibility to predict flow-duration curves in ungauged basins was explored by testing several different methodologies including machine learning. The results were mixed, with some well predicted curves, but many predicted curves exhibited large biases and several methods resulted in unrealistic curves. / Vatten är en förutsättning för människors och ekosystems hälsa, men befolkningsökning och förändringar av klimat och markanvändning förväntas öka trycket på vattenresurserna i många regioner i världen. För att kunna säkerställa en god tillgång till vatten krävs kunskap om hur dessa resurser varierar i tid och rum. Tillförlitligheten hos skattningar av globala vattenresurser begränsas dock både av begränsad tillgänglighet av och kvalitet hos observerade data. Denna avhandling utforskar kvaliteten av såväl observations- som modellbaserade data, ger en överblick över modeller som används för storskalig hydrologisk modellering och utforskar möjligheterna att förutsäga varaktighetskurvor som ett sätt att hantera bristen på data i många områden. Utvärderingen av observationsbaserade datas kvalitet baserades på hydrografiska data och driv- och utvärderingsdata för storskaliga hydrologiska modeller. Resultaten visade att en uppsättning data över hydrografin baserad på GIS-polygoner representerade avrinningsområdesareorna bättre än alla de som byggde på rutor. En metod baserad på långtidsvattenbalansen identifierade att kombinationen av drivdata (nederbörd och potentiell avdunstning) och utvärderingsdata (vattenföring) var fysiskt orimlig för så många som 8–43 % av de analyserade avrinningsområdena beroende på hur olika datauppsättningar kombinerades. Sådana data kan vara desinformativa för slutsatser som dras av resultat från hydrologiska modeller och analyser. Kvaliteten hos hydrologiskt viktiga variabler från en numerisk väderprognosmodell utvärderades dels genom jämförelser med observationsdata och dels genom analys av landytans vattenbudget för ett flertal olika modellvarianter. Resultaten visade obalanser mellan långtidsvärden av nederbörd och avdunstning i global skala och mellan långtidsvärden av nederbörd, avdunstning och avrinning i både modellrute- och avrinningsområdesskala. Dessa obalanser skulle till stor del kunna förklaras av den data assimilering som görs, i vilken markvattenlagret används som en justeringsfaktor för att förbättra väderprognoserna. Regionalisering, som innebär en överföring av information från områden med god tillgång på mätdata till områden med otillräcklig tillgång, är i många fall nödvändig för hydrologisk analys på grund av att mätdata saknas i många områden. I denna avhandling utforskades möjligheten att förutsäga varaktighetskurvor för avrinningsområden utan vattenföringsdata genom flera metoder inklusive maskininlärning. Resultaten var blandade med en del kurvor som förutsas väl, och andra kurvor som visade stora systematiska avvikelser. Flera metoder resulterade i orealistiska kurvor (ickemonotona eller med negativa värden).

Antarctic Wind Engineering deals with the effects of wind on the built environment. The assessment of wind induced forces, wind resource and wind driven snowdrifts are the main tasks for a wind engineer when participating on the design of an Antarctic building. While conventional Wind Engineering techniques are generally applicable to the Antarctic environment, there are some aspects that require further analysis due to the special characteristics of the Antarctic wind climate and its boundary layer meteorology. <p>The first issue in remote places like Antarctica is the lack of site wind measurements and meteorological information in general. In order to complement this shortage of information various meteorological databases have been surveyed. Global Reanalyses, produced by the European Met Office ECMWF, and RACMO/ANT mesoscale model simulations, produced by the Institute for Marine and Atmospheric Research of Utrecht University (IMAU), have been validated versus independent observations from a network of 115 automatic weather stations. The resolution of these models, of some tens of kilometers, is sufficient to characterize the wind climate in areas of smooth topography like the interior plateaus or the coastal ice shelves. In contrast, in escarpment and coastal areas, where the terrain gets rugged and katabatic winds are further intensified in confluence zones, the models lack resolution and underestimate the wind velocity. <p>The Antarctic atmospheric boundary layer (ABL) is characterized by the presence of strong katabatic winds that are generated by the presence of surface temperature inversions in sloping terrain. This inversion is persistent in Antarctica due to an almost continuous cooling by longwave radiation, especially during the winter night. As a result, the ABL is stably stratified most of the time and, only when the wind speed is high it becomes near neutrally stratified. This thesis also aims at making a critical review of the hypothesis underlying wind engineering models when extreme boundary layer situations are faced. It will be shown that the classical approach of assuming a neutral log-law in the surface layer can hold for studies of wind loading under strong winds but can be of limited use when detailed assessments are pursued. <p>The Antarctic landscape, mostly composed of very long fetches of ice covered terrain, makes it an optimum natural laboratory for the development of homogeneous boundary layers, which are a basic need for the formulation of ABL theories. Flux-profile measurements, made at Halley Research Station in the Brunt Ice Shelf by the British Antarctic Survery (BAS), have been used to analyze boundary layer similarity in view of formulating a one-dimensional ABL model. A 1D model of the neutral and stable boundary layer with a transport model for blowing snow has been implemented and verified versus test cases of the literature. A validation of quasi-stationary homogeneous profiles at different levels of stability confirms that such 1D models can be used to classify wind profiles to be used as boundary conditions for detailed 3D computational wind engineering studies. <p>A summary of the wind engineering activities carried out during the design of the Antarctic Research Station is provided as contextual reference and point of departure of this thesis. An elevated building on top of sloping terrain and connected to an under-snow garage constitutes a challenging environment for building design. Building aerodynamics and snowdrift management were tested in the von Karman Institute L1B wind tunnel for different building geometries and ridge integrations. Not only for safety and cost reduction but also for the integration of renewable energies, important benefits in the design of a building can be achieved if wind engineering is considered since the conceptual phase of the integrated building design process.<p> / Doctorat en Sciences de l'ingénieur / info:eu-repo/semantics/nonPublished