<p>Commissioned by the government, SOS Alarm has undertaken the assignment to be responsible for the emergency calls within Sweden. They are also performing commissions for the county councils in dispatching ambulances. SOS Alarms business concept is to develop, offer and perform services to create safety in emergency situations and to create a safer society.</p><p>To develop the ambulance services in Sweden, SOS Alarm started a project in the beginning of 2003. The project is called OPAL, Optimized Ambulance Logistics, and it is being conducted in cooperation with Linköpings Universitet. Ambulance Logistics is the planning, implementation and control of resources and information used to facilitate an efficient way of serving a person in need of out-of-hospital medical care, including possible transportation.</p><p>Among other things, the OPAL-project has resulted in a preparedness calculator. The calculator calculates the preparedness for certain areas in Sweden (so far Dalarna and the county of Stockholm) and visualizes the preparedness on a digital map to support the persons who dispatch the ambulances. If an area has “bad preparedness”, in simple terms it means that there are not enough ambulances in the surrounding area to cover the probable needs.</p><p>The inputs for the preparedness calculator include forecasts of where and when ambulance calls are probable to occur in Sweden. The purpose with this thesis is to create a method to produce these forecasts. A method to update the forecasts when new input data is available also has to be created. The data analysis and production of forecasts in this thesis are based on data from Dalarna. However, the method has to be generalized and eventually applicable to produce forecasts for the rest of Sweden.</p><p>An analysis of historical data shows that the demand is constant, with no obvious trend. It is obvious that number of ambulance calls is differentiated over the days of the week and also over the hours of the day. Therefore, the week is categorized into 168 different indexes, one for each hour of the week. The next step is to examine two reasonable forecasting methods, moving average and exponential smoothing, and compare their quantitative and qualitative characteristics. Based on these comparisons, the moving average method is recommended.</p><p>With the forecasts, the preparedness in selected areas can be calculated and SOS Alarm receives excellent assistance in dispatching ambulances in a more efficient way. The preparedness calculator will assist in preventing bad preparedness and it makes sure that the best possible preparedness is being upheld. Therefore, good forecasting can contribute to a safer society and to saving human lives.</p> / <p>SOS Alarm har, med staten som uppdragsgivare, åtagit sig att svara för nödnumret 112 inom Sverige. De utför även uppdrag för landstingens räkning, inom ambulansalarmering och inom ambulansdirigering. SOS Alarms affärsidé är att utveckla, erbjuda och utföra tjänster för att skapa trygghet i nödsituationer och bidra till ett tryggare samhälle.</p><p>I början av år 2003 inledde SOS Alarm projektet OPAL med målet att utveckla ambulansverksamheten i Sverige. OPAL står för Optimerad Ambulanslogistik och drivs i samarbete med Linköpings universitet. Ambulanslogistik är den planering, implementering och kontroll av resurser och information som utförs för att åstadkomma ett effektivt sätt att betjäna en person i behov av vård utanför sjukhuset, inklusive eventuell transport.</p><p>OPAL-projektet har bland annat resulterat i en beredskapskalkylator. Denna kalkylator beräknar beredskapen för vissa områden i Sverige (för närvarande i Dalarna och Stockholms län) och visualiserar dessa beredskaper på en digital karta som stöd för de personer som styr ambulanserna och tilldelar dem uppdrag. ”Dålig beredskap” i ett område innebär förenklat att det inte finns tillräckligt många ambulanser i närheten för att uppfylla det förväntade behovet.</p><p>En ingående parameter som behövs till beredskapskalkylatorn är prognoser för när det är troligt att uppdrag kommer att uppstå i olika områden. Syftet med examensarbetet är att skapa en metod för att prognostisera detta förväntade antal uppdrag för ambulanserna i Sverige. En metod ska även skapas för att prognoserna ska kunna uppdateras i takt med att ny data samlas in. Analysen av data och framtagning av prognoserna utförs i examensarbetet för Dalarna som exempel, men metoden ska kunna användas även för att ta fram prognoser för övriga Sverige.</p><p>En analys av historiska data för Dalarna visar en bakomliggande konstant efterfrågemodell utan tydlig trend. Det visar sig tydligt att antal uppdrag beror på vilken veckodag samt vilken timme på dygnet som råder. Valet blir därför att tilldela veckan 168 olika index, ett för varje timme under veckan. Sedan undersöks två rimliga prognosmetoder, glidande medelvärde och exponentiell utjämning, som jämförs kvalitativt och kvantitativt. Med dessa analyser som grund rekommenderas metoden glidande medelvärde.</p><p>Med prognosvärden kan beredskapen i utvalda områden beräknas och SOS Alarm får god hjälp att dirigera ambulanser på ett mer effektivt sätt. Beredskapskalkylatorn är ett verktyg som hjälper till att förebygga dålig beredskap och att se till att bästa möjliga beredskap hålls. Goda prognoser kan alltså bidra till ett tryggare samhälle och att rädda människoliv.</p>

The atomic layer deposition (ALD) growth of titania thin films was studied for the infiltration of silica photonic crystals. Titania thin films were grown in a custom-built ALD reactor by the alternating pulsing and purging of TiCl4 and water vapor. The conformal nature of ALD growth makes it an ideal candidate for the infiltration of the complex opal structure. Titania is a high refractive index material, which makes it a popular material for use in photonic crystal (PC) applications. Photonic crystals are periodic dielectric structures that forbid the propagation of light in a certain wavelength range. This forbidden range is known as the photonic band gap (PBG). A refractive index contrast of at least 2.8 is required for a complete PBG in an inverted opal structure. Therefore, the rutile structure of titania is more desirable for use in PCs due to its higher index of refraction than the anatase or brookite structure. The growth mechanisms and film properties of the TiO2 thin films were studied. Investigation of the growth mechanisms revealed saturated growth rate conditions for multiple temperature regions. Film characterization techniques included XRD, SEM/EDS, XPS, AFM, reflectivity, and index of refraction measurements. Post growth heat treatment was performed to study the conversion from the as-deposited crystal structure to the rutile structure. After optimization of the deposition process, the infiltration of silica opals for PC applications was attempted. The filling fraction was optimized by increasing the pulse and purge lengths at a deposition temperature of 100oC. Although the silica opals were successfully infiltrated using ALD of TiO2, the long range order of the PC was destroyed after the heat treatment step required to achieve the high index rutile structure.

Abstract In order to understand the source, transport pathway and sink of settling particulates off northeast Taiwan, time-series sediment traps (PPS-3/3) were deployed on the north slope of Ilan ridge (T18) and in the Okinawa trough (T15 and T16) to collect settling particulates. The trapped particulate samples were determined for apparent mass flux (T18), particle size distribution, and contents of lithogenic portion, metals (Al, Mg, Ca, Fe, Mn, Cu), opal, OC (organic carbon) and IC (inorganic carbon). The results show that mass flux in winter is higher than in summer except for typhoon or rainstorm in summer which may cause high particulate flux. At mooring T11 and T17, only 2 cups had collected particulates but with rapid decrease, and the remaining cups were empty. It is not clear whether Kuroshio plays a role and further investigation is needed. The trapped particulates were mainly clay and silt in the north slope of Ilan ridge and south Okinawa trough, and were sand and silt in the Mien-Hwa canyon. The portion of coarse silt and larger particles (>31 mm) decreases with an increase of distance from the land (from T11 to T18). The grain size distribution of particulate at T18 is similar to that at T15 and T16, but the mass flux in the north slope of Ilan ridge is an order of magnitude higher than in the south Okinawa trough. The size distribution pattern below 600m water depth is very similar at both T15 and T16, but the coarse fraction (> 31 mm) is more at the upper than lower traps, presumably due to lateral transport. The Mn content of the trapped particulates in the south Okinawa trough is twice as hign as that in the north slope of Ilan ridge. High Mn/Al ratio in the trough suggests that Mn is supplied by hydrothermal activities. Lithogenic portions occupy about 84~88.5% at T18, T16 and T15. Relative to other marginal seas biogenic contributions are clearly lower.

Universiẗat, Diss., 1999--Freiburg (Breisgau).

University, Diss., 2001--München.

No estado do Rio Grande do Sul, os garimpos de pedras preciosas estão distribuídos em duas regiões principais: no Distrito Mineiro de Ametista do Sul (maior produtor de ametista) e no Distrito Mineiro de Salto do Jacuí (maior produtor de ágata). Nestes dois distritos mineiros são explorados geodos, parcial ou totalmente preenchidos por camadas intercaladas de ágata, quartzo incolor, ametista, calcita e opala. O processo de extração desses geodos gera grande quantidade de rejeito, composto tanto pela rocha portadora do minério como também por minério de baixa qualidade. No município de Soledade se concentram as principais empresas de beneficiamento e também o comércio dos materiais gemológicos explorados no Rio Grande do Sul. No entanto, a maioria dos objetos produzidos que visam à exportação se repete nas diversas indústrias beneficiadoras sem diferencial aparente. A opala encontrada nos garimpos de Salto do Jacuí ocorre em muitas cores. A opala branca é a mais comum e não é valorizada, gerando, assim, significativa quantidade de rejeito. Através deste estudo, objetiva-se estabelecer uma metodologia de beneficiamento por usinagem CNC do rejeito de opala branca e ágata oriundo do Distrito Mineiro de Salto do Jacuí, que agregue valor pelo design e tecnologia. Considerando que os processos mais utilizados nas indústrias atualmente para a ágata, o tingimento e o corte em chapas, não se aplicam à opala, pode-se afirmar que a introdução da tecnologia de usinagem CNC neste setor pode auxiliar no aproveitamento desse material, ao modificá-los e valorizá-los como objetos de adorno sob a forma de camafeus. A metodologia empregada para a presente pesquisa consistiu de etapas de identificação dos locais de extração de ágata e de opala branca do Estado; avaliação dos procedimentos mais utilizados para beneficiamento destes materiais; estudo e análise do material por técnicas específicas; ensaios de usinagem CNC, análise das fresas utilizadas e dos materiais envolvidos após os processos de usinagem e desenvolvimento de produto. Foram realizados nove ensaios de usinagem e as análises posteriores, identificando nos resultados obtidos que, com as fresas adequadas destinadas ao desgaste (maior diâmetro) ou acabamento (menor diâmetro de ponta), quando utilizados em conjunto com parâmetros e estratégias de usinagem bem definidos, são suficientes para que se alcance o objetivo definido nesta pesquisa. / In the state of Rio Grande do Sul, the precious stones mines are distributed in two main regions: in the Mining District of South Amethyst (largest producer of amethyst) and the Mining District of the Salto Jacuí (largest producer of agate). In these two districts Geodis miners are exploited, partially or completely filled by intercalated layers of agate, clear quartz, amethyst, opal and calcite. The extraction process of Geodis generates large amounts of waste, comprising both the rock of the ore carrier as well as of low quality ore. In the municipality of Soledade focus the main company to benefit from trade and gemological materials used in Rio Grande do Sul. However, most of the objects produced aimed at the export is repeated in various industries benefit without apparent difference. The opal found in the mines of the Salto Jacuí appears in many colors. The white opal is the most common and is not valued, thus generating significant amount of waste. Through this study, that aims to establish a methodology for processing by the CNC machining waste of opal and white agate from the Mining District of the Salto Jacuí, a great value was added for design and technology. Whereas the most currently used in industries for agate, dyeing and cut into plates, are not applied to the opal, one can say that the introduction of CNC machining in this sector can assist in the exploitation of such material, to modify and value them as objects of adornment in the form of camafeus. The methodology used for this research consisted of steps of identifying locations for extraction of opal and white agate the state, evaluate the procedures used for further processing of these materials, study and analysis of the material by specific techniques, testing of CNC machining, analysis of cutters and materials used after the processes involved in machining and product development. Were conducted nine tests of machining and the subsequent analysis, identifying the results that, with the cutters suitable for the wear (larger diameter) or finishing (minor diameter of tip), when used together with parameters and machining strategies for well-defined, are sufficient to achieve the goal defined in this study.

No estado do Rio Grande do Sul, os garimpos de pedras preciosas estão distribuídos em duas regiões principais: no Distrito Mineiro de Ametista do Sul (maior produtor de ametista) e no Distrito Mineiro de Salto do Jacuí (maior produtor de ágata). Nestes dois distritos mineiros são explorados geodos, parcial ou totalmente preenchidos por camadas intercaladas de ágata, quartzo incolor, ametista, calcita e opala. O processo de extração desses geodos gera grande quantidade de rejeito, composto tanto pela rocha portadora do minério como também por minério de baixa qualidade. No município de Soledade se concentram as principais empresas de beneficiamento e também o comércio dos materiais gemológicos explorados no Rio Grande do Sul. No entanto, a maioria dos objetos produzidos que visam à exportação se repete nas diversas indústrias beneficiadoras sem diferencial aparente. A opala encontrada nos garimpos de Salto do Jacuí ocorre em muitas cores. A opala branca é a mais comum e não é valorizada, gerando, assim, significativa quantidade de rejeito. Através deste estudo, objetiva-se estabelecer uma metodologia de beneficiamento por usinagem CNC do rejeito de opala branca e ágata oriundo do Distrito Mineiro de Salto do Jacuí, que agregue valor pelo design e tecnologia. Considerando que os processos mais utilizados nas indústrias atualmente para a ágata, o tingimento e o corte em chapas, não se aplicam à opala, pode-se afirmar que a introdução da tecnologia de usinagem CNC neste setor pode auxiliar no aproveitamento desse material, ao modificá-los e valorizá-los como objetos de adorno sob a forma de camafeus. A metodologia empregada para a presente pesquisa consistiu de etapas de identificação dos locais de extração de ágata e de opala branca do Estado; avaliação dos procedimentos mais utilizados para beneficiamento destes materiais; estudo e análise do material por técnicas específicas; ensaios de usinagem CNC, análise das fresas utilizadas e dos materiais envolvidos após os processos de usinagem e desenvolvimento de produto. Foram realizados nove ensaios de usinagem e as análises posteriores, identificando nos resultados obtidos que, com as fresas adequadas destinadas ao desgaste (maior diâmetro) ou acabamento (menor diâmetro de ponta), quando utilizados em conjunto com parâmetros e estratégias de usinagem bem definidos, são suficientes para que se alcance o objetivo definido nesta pesquisa. / In the state of Rio Grande do Sul, the precious stones mines are distributed in two main regions: in the Mining District of South Amethyst (largest producer of amethyst) and the Mining District of the Salto Jacuí (largest producer of agate). In these two districts Geodis miners are exploited, partially or completely filled by intercalated layers of agate, clear quartz, amethyst, opal and calcite. The extraction process of Geodis generates large amounts of waste, comprising both the rock of the ore carrier as well as of low quality ore. In the municipality of Soledade focus the main company to benefit from trade and gemological materials used in Rio Grande do Sul. However, most of the objects produced aimed at the export is repeated in various industries benefit without apparent difference. The opal found in the mines of the Salto Jacuí appears in many colors. The white opal is the most common and is not valued, thus generating significant amount of waste. Through this study, that aims to establish a methodology for processing by the CNC machining waste of opal and white agate from the Mining District of the Salto Jacuí, a great value was added for design and technology. Whereas the most currently used in industries for agate, dyeing and cut into plates, are not applied to the opal, one can say that the introduction of CNC machining in this sector can assist in the exploitation of such material, to modify and value them as objects of adornment in the form of camafeus. The methodology used for this research consisted of steps of identifying locations for extraction of opal and white agate the state, evaluate the procedures used for further processing of these materials, study and analysis of the material by specific techniques, testing of CNC machining, analysis of cutters and materials used after the processes involved in machining and product development. Were conducted nine tests of machining and the subsequent analysis, identifying the results that, with the cutters suitable for the wear (larger diameter) or finishing (minor diameter of tip), when used together with parameters and machining strategies for well-defined, are sufficient to achieve the goal defined in this study.

Commissioned by the government, SOS Alarm has undertaken the assignment to be responsible for the emergency calls within Sweden. They are also performing commissions for the county councils in dispatching ambulances. SOS Alarms business concept is to develop, offer and perform services to create safety in emergency situations and to create a safer society. To develop the ambulance services in Sweden, SOS Alarm started a project in the beginning of 2003. The project is called OPAL, Optimized Ambulance Logistics, and it is being conducted in cooperation with Linköpings Universitet. Ambulance Logistics is the planning, implementation and control of resources and information used to facilitate an efficient way of serving a person in need of out-of-hospital medical care, including possible transportation. Among other things, the OPAL-project has resulted in a preparedness calculator. The calculator calculates the preparedness for certain areas in Sweden (so far Dalarna and the county of Stockholm) and visualizes the preparedness on a digital map to support the persons who dispatch the ambulances. If an area has “bad preparedness”, in simple terms it means that there are not enough ambulances in the surrounding area to cover the probable needs. The inputs for the preparedness calculator include forecasts of where and when ambulance calls are probable to occur in Sweden. The purpose with this thesis is to create a method to produce these forecasts. A method to update the forecasts when new input data is available also has to be created. The data analysis and production of forecasts in this thesis are based on data from Dalarna. However, the method has to be generalized and eventually applicable to produce forecasts for the rest of Sweden. An analysis of historical data shows that the demand is constant, with no obvious trend. It is obvious that number of ambulance calls is differentiated over the days of the week and also over the hours of the day. Therefore, the week is categorized into 168 different indexes, one for each hour of the week. The next step is to examine two reasonable forecasting methods, moving average and exponential smoothing, and compare their quantitative and qualitative characteristics. Based on these comparisons, the moving average method is recommended. With the forecasts, the preparedness in selected areas can be calculated and SOS Alarm receives excellent assistance in dispatching ambulances in a more efficient way. The preparedness calculator will assist in preventing bad preparedness and it makes sure that the best possible preparedness is being upheld. Therefore, good forecasting can contribute to a safer society and to saving human lives. / SOS Alarm har, med staten som uppdragsgivare, åtagit sig att svara för nödnumret 112 inom Sverige. De utför även uppdrag för landstingens räkning, inom ambulansalarmering och inom ambulansdirigering. SOS Alarms affärsidé är att utveckla, erbjuda och utföra tjänster för att skapa trygghet i nödsituationer och bidra till ett tryggare samhälle. I början av år 2003 inledde SOS Alarm projektet OPAL med målet att utveckla ambulansverksamheten i Sverige. OPAL står för Optimerad Ambulanslogistik och drivs i samarbete med Linköpings universitet. Ambulanslogistik är den planering, implementering och kontroll av resurser och information som utförs för att åstadkomma ett effektivt sätt att betjäna en person i behov av vård utanför sjukhuset, inklusive eventuell transport. OPAL-projektet har bland annat resulterat i en beredskapskalkylator. Denna kalkylator beräknar beredskapen för vissa områden i Sverige (för närvarande i Dalarna och Stockholms län) och visualiserar dessa beredskaper på en digital karta som stöd för de personer som styr ambulanserna och tilldelar dem uppdrag. ”Dålig beredskap” i ett område innebär förenklat att det inte finns tillräckligt många ambulanser i närheten för att uppfylla det förväntade behovet. En ingående parameter som behövs till beredskapskalkylatorn är prognoser för när det är troligt att uppdrag kommer att uppstå i olika områden. Syftet med examensarbetet är att skapa en metod för att prognostisera detta förväntade antal uppdrag för ambulanserna i Sverige. En metod ska även skapas för att prognoserna ska kunna uppdateras i takt med att ny data samlas in. Analysen av data och framtagning av prognoserna utförs i examensarbetet för Dalarna som exempel, men metoden ska kunna användas även för att ta fram prognoser för övriga Sverige. En analys av historiska data för Dalarna visar en bakomliggande konstant efterfrågemodell utan tydlig trend. Det visar sig tydligt att antal uppdrag beror på vilken veckodag samt vilken timme på dygnet som råder. Valet blir därför att tilldela veckan 168 olika index, ett för varje timme under veckan. Sedan undersöks två rimliga prognosmetoder, glidande medelvärde och exponentiell utjämning, som jämförs kvalitativt och kvantitativt. Med dessa analyser som grund rekommenderas metoden glidande medelvärde. Med prognosvärden kan beredskapen i utvalda områden beräknas och SOS Alarm får god hjälp att dirigera ambulanser på ett mer effektivt sätt. Beredskapskalkylatorn är ett verktyg som hjälper till att förebygga dålig beredskap och att se till att bästa möjliga beredskap hålls. Goda prognoser kan alltså bidra till ett tryggare samhälle och att rädda människoliv.

Der Beitrag geht der Fragestellung nach, welche Gamedesign-Elemente sich als attraktive und strategisch sinnvolle Ergänzung für die sächsische Lernplattform OPAL identifizieren lassen und wie mithilfe solcher Elemente die Motivation zur OPAL-Nutzung und im Zuge dessen auch zum Studium gesteigert werden kann.

Since the East Texas area has many minerals in the categories which yield semiprecious stones of commercial value--jasper, wood agate, wood opal, and silicified stone, the author undertook this study to determine: (1) the extent which these minerals could be utilized as sources for gems; (2) the equipment necessary for cutting and polishing the stones; and (3) the techniques for finishing the gems.