Indiana University-Purdue University Indianapolis (IUPUI)

No estado do Rio Grande do Sul, os garimpos de pedras preciosas estão distribuídos em duas regiões principais: no Distrito Mineiro de Ametista do Sul (maior produtor de ametista) e no Distrito Mineiro de Salto do Jacuí (maior produtor de ágata). Nestes dois distritos mineiros são explorados geodos, parcial ou totalmente preenchidos por camadas intercaladas de ágata, quartzo incolor, ametista, calcita e opala. O processo de extração desses geodos gera grande quantidade de rejeito, composto tanto pela rocha portadora do minério como também por minério de baixa qualidade. No município de Soledade se concentram as principais empresas de beneficiamento e também o comércio dos materiais gemológicos explorados no Rio Grande do Sul. No entanto, a maioria dos objetos produzidos que visam à exportação se repete nas diversas indústrias beneficiadoras sem diferencial aparente. A opala encontrada nos garimpos de Salto do Jacuí ocorre em muitas cores. A opala branca é a mais comum e não é valorizada, gerando, assim, significativa quantidade de rejeito. Através deste estudo, objetiva-se estabelecer uma metodologia de beneficiamento por usinagem CNC do rejeito de opala branca e ágata oriundo do Distrito Mineiro de Salto do Jacuí, que agregue valor pelo design e tecnologia. Considerando que os processos mais utilizados nas indústrias atualmente para a ágata, o tingimento e o corte em chapas, não se aplicam à opala, pode-se afirmar que a introdução da tecnologia de usinagem CNC neste setor pode auxiliar no aproveitamento desse material, ao modificá-los e valorizá-los como objetos de adorno sob a forma de camafeus. A metodologia empregada para a presente pesquisa consistiu de etapas de identificação dos locais de extração de ágata e de opala branca do Estado; avaliação dos procedimentos mais utilizados para beneficiamento destes materiais; estudo e análise do material por técnicas específicas; ensaios de usinagem CNC, análise das fresas utilizadas e dos materiais envolvidos após os processos de usinagem e desenvolvimento de produto. Foram realizados nove ensaios de usinagem e as análises posteriores, identificando nos resultados obtidos que, com as fresas adequadas destinadas ao desgaste (maior diâmetro) ou acabamento (menor diâmetro de ponta), quando utilizados em conjunto com parâmetros e estratégias de usinagem bem definidos, são suficientes para que se alcance o objetivo definido nesta pesquisa. / In the state of Rio Grande do Sul, the precious stones mines are distributed in two main regions: in the Mining District of South Amethyst (largest producer of amethyst) and the Mining District of the Salto Jacuí (largest producer of agate). In these two districts Geodis miners are exploited, partially or completely filled by intercalated layers of agate, clear quartz, amethyst, opal and calcite. The extraction process of Geodis generates large amounts of waste, comprising both the rock of the ore carrier as well as of low quality ore. In the municipality of Soledade focus the main company to benefit from trade and gemological materials used in Rio Grande do Sul. However, most of the objects produced aimed at the export is repeated in various industries benefit without apparent difference. The opal found in the mines of the Salto Jacuí appears in many colors. The white opal is the most common and is not valued, thus generating significant amount of waste. Through this study, that aims to establish a methodology for processing by the CNC machining waste of opal and white agate from the Mining District of the Salto Jacuí, a great value was added for design and technology. Whereas the most currently used in industries for agate, dyeing and cut into plates, are not applied to the opal, one can say that the introduction of CNC machining in this sector can assist in the exploitation of such material, to modify and value them as objects of adornment in the form of camafeus. The methodology used for this research consisted of steps of identifying locations for extraction of opal and white agate the state, evaluate the procedures used for further processing of these materials, study and analysis of the material by specific techniques, testing of CNC machining, analysis of cutters and materials used after the processes involved in machining and product development. Were conducted nine tests of machining and the subsequent analysis, identifying the results that, with the cutters suitable for the wear (larger diameter) or finishing (minor diameter of tip), when used together with parameters and machining strategies for well-defined, are sufficient to achieve the goal defined in this study.

No estado do Rio Grande do Sul, os garimpos de pedras preciosas estão distribuídos em duas regiões principais: no Distrito Mineiro de Ametista do Sul (maior produtor de ametista) e no Distrito Mineiro de Salto do Jacuí (maior produtor de ágata). Nestes dois distritos mineiros são explorados geodos, parcial ou totalmente preenchidos por camadas intercaladas de ágata, quartzo incolor, ametista, calcita e opala. O processo de extração desses geodos gera grande quantidade de rejeito, composto tanto pela rocha portadora do minério como também por minério de baixa qualidade. No município de Soledade se concentram as principais empresas de beneficiamento e também o comércio dos materiais gemológicos explorados no Rio Grande do Sul. No entanto, a maioria dos objetos produzidos que visam à exportação se repete nas diversas indústrias beneficiadoras sem diferencial aparente. A opala encontrada nos garimpos de Salto do Jacuí ocorre em muitas cores. A opala branca é a mais comum e não é valorizada, gerando, assim, significativa quantidade de rejeito. Através deste estudo, objetiva-se estabelecer uma metodologia de beneficiamento por usinagem CNC do rejeito de opala branca e ágata oriundo do Distrito Mineiro de Salto do Jacuí, que agregue valor pelo design e tecnologia. Considerando que os processos mais utilizados nas indústrias atualmente para a ágata, o tingimento e o corte em chapas, não se aplicam à opala, pode-se afirmar que a introdução da tecnologia de usinagem CNC neste setor pode auxiliar no aproveitamento desse material, ao modificá-los e valorizá-los como objetos de adorno sob a forma de camafeus. A metodologia empregada para a presente pesquisa consistiu de etapas de identificação dos locais de extração de ágata e de opala branca do Estado; avaliação dos procedimentos mais utilizados para beneficiamento destes materiais; estudo e análise do material por técnicas específicas; ensaios de usinagem CNC, análise das fresas utilizadas e dos materiais envolvidos após os processos de usinagem e desenvolvimento de produto. Foram realizados nove ensaios de usinagem e as análises posteriores, identificando nos resultados obtidos que, com as fresas adequadas destinadas ao desgaste (maior diâmetro) ou acabamento (menor diâmetro de ponta), quando utilizados em conjunto com parâmetros e estratégias de usinagem bem definidos, são suficientes para que se alcance o objetivo definido nesta pesquisa. / In the state of Rio Grande do Sul, the precious stones mines are distributed in two main regions: in the Mining District of South Amethyst (largest producer of amethyst) and the Mining District of the Salto Jacuí (largest producer of agate). In these two districts Geodis miners are exploited, partially or completely filled by intercalated layers of agate, clear quartz, amethyst, opal and calcite. The extraction process of Geodis generates large amounts of waste, comprising both the rock of the ore carrier as well as of low quality ore. In the municipality of Soledade focus the main company to benefit from trade and gemological materials used in Rio Grande do Sul. However, most of the objects produced aimed at the export is repeated in various industries benefit without apparent difference. The opal found in the mines of the Salto Jacuí appears in many colors. The white opal is the most common and is not valued, thus generating significant amount of waste. Through this study, that aims to establish a methodology for processing by the CNC machining waste of opal and white agate from the Mining District of the Salto Jacuí, a great value was added for design and technology. Whereas the most currently used in industries for agate, dyeing and cut into plates, are not applied to the opal, one can say that the introduction of CNC machining in this sector can assist in the exploitation of such material, to modify and value them as objects of adornment in the form of camafeus. The methodology used for this research consisted of steps of identifying locations for extraction of opal and white agate the state, evaluate the procedures used for further processing of these materials, study and analysis of the material by specific techniques, testing of CNC machining, analysis of cutters and materials used after the processes involved in machining and product development. Were conducted nine tests of machining and the subsequent analysis, identifying the results that, with the cutters suitable for the wear (larger diameter) or finishing (minor diameter of tip), when used together with parameters and machining strategies for well-defined, are sufficient to achieve the goal defined in this study.

No estado do Rio Grande do Sul, os garimpos de pedras preciosas estão distribuídos em duas regiões principais: no Distrito Mineiro de Ametista do Sul (maior produtor de ametista) e no Distrito Mineiro de Salto do Jacuí (maior produtor de ágata). Nestes dois distritos mineiros são explorados geodos, parcial ou totalmente preenchidos por camadas intercaladas de ágata, quartzo incolor, ametista, calcita e opala. O processo de extração desses geodos gera grande quantidade de rejeito, composto tanto pela rocha portadora do minério como também por minério de baixa qualidade. No município de Soledade se concentram as principais empresas de beneficiamento e também o comércio dos materiais gemológicos explorados no Rio Grande do Sul. No entanto, a maioria dos objetos produzidos que visam à exportação se repete nas diversas indústrias beneficiadoras sem diferencial aparente. A opala encontrada nos garimpos de Salto do Jacuí ocorre em muitas cores. A opala branca é a mais comum e não é valorizada, gerando, assim, significativa quantidade de rejeito. Através deste estudo, objetiva-se estabelecer uma metodologia de beneficiamento por usinagem CNC do rejeito de opala branca e ágata oriundo do Distrito Mineiro de Salto do Jacuí, que agregue valor pelo design e tecnologia. Considerando que os processos mais utilizados nas indústrias atualmente para a ágata, o tingimento e o corte em chapas, não se aplicam à opala, pode-se afirmar que a introdução da tecnologia de usinagem CNC neste setor pode auxiliar no aproveitamento desse material, ao modificá-los e valorizá-los como objetos de adorno sob a forma de camafeus. A metodologia empregada para a presente pesquisa consistiu de etapas de identificação dos locais de extração de ágata e de opala branca do Estado; avaliação dos procedimentos mais utilizados para beneficiamento destes materiais; estudo e análise do material por técnicas específicas; ensaios de usinagem CNC, análise das fresas utilizadas e dos materiais envolvidos após os processos de usinagem e desenvolvimento de produto. Foram realizados nove ensaios de usinagem e as análises posteriores, identificando nos resultados obtidos que, com as fresas adequadas destinadas ao desgaste (maior diâmetro) ou acabamento (menor diâmetro de ponta), quando utilizados em conjunto com parâmetros e estratégias de usinagem bem definidos, são suficientes para que se alcance o objetivo definido nesta pesquisa. / In the state of Rio Grande do Sul, the precious stones mines are distributed in two main regions: in the Mining District of South Amethyst (largest producer of amethyst) and the Mining District of the Salto Jacuí (largest producer of agate). In these two districts Geodis miners are exploited, partially or completely filled by intercalated layers of agate, clear quartz, amethyst, opal and calcite. The extraction process of Geodis generates large amounts of waste, comprising both the rock of the ore carrier as well as of low quality ore. In the municipality of Soledade focus the main company to benefit from trade and gemological materials used in Rio Grande do Sul. However, most of the objects produced aimed at the export is repeated in various industries benefit without apparent difference. The opal found in the mines of the Salto Jacuí appears in many colors. The white opal is the most common and is not valued, thus generating significant amount of waste. Through this study, that aims to establish a methodology for processing by the CNC machining waste of opal and white agate from the Mining District of the Salto Jacuí, a great value was added for design and technology. Whereas the most currently used in industries for agate, dyeing and cut into plates, are not applied to the opal, one can say that the introduction of CNC machining in this sector can assist in the exploitation of such material, to modify and value them as objects of adornment in the form of camafeus. The methodology used for this research consisted of steps of identifying locations for extraction of opal and white agate the state, evaluate the procedures used for further processing of these materials, study and analysis of the material by specific techniques, testing of CNC machining, analysis of cutters and materials used after the processes involved in machining and product development. Were conducted nine tests of machining and the subsequent analysis, identifying the results that, with the cutters suitable for the wear (larger diameter) or finishing (minor diameter of tip), when used together with parameters and machining strategies for well-defined, are sufficient to achieve the goal defined in this study.

Under två decennier har utvecklare inom mjukvarutestning utvecklat testtekniken Modell-baseradtestning. Tekniken bygger på att man genererar testfall från en modell (tex i UML), istället föratt manuallet skriva testfall. Detta kan göra testprocessen mer effektiv, vilket leder till att merarbeten kan göras på kortare tid. Det kan också ses som en ekonomiskt fördel för företag därtestning är huvudområdet. Modell-baserad testning har goda omdömen och teorin för teknikenär väl dokumenterad i artiklar, arbeten samt böcker. Mycket tyder på att tekniken rent teoretisktär användbar i praktiken dessutom finns det väldigt lite kritik mot tekniken. Men trots alltdetta har Modell-baserad testning inte blomstrat inom IT-industrin.Syftet med detta arbete är att ta reda på vad anledningarna skulle kunna vara till att MBT intelyckats bättre inom industrin. I arbetet används tre olika MBT-verktyg för att testa och sedanjämföra om resultatet i praktiken blir som teorin beskriver tekniken. Studiens resultat pekar påatt tekniken fortfarande är omogen och många brister kring Modell-baserad testning stöts på. / For two decades, software testing developers have developed the Model-based testing technique.The technology is based on generating test cases from a model (e.g. in UML) instead of manuallywriting test cases. This can make the test process more efficient, which leads to more workcan be done in less time. It can also be seen as an economic benefit for companies where testingis the main area. Model-based testing has good reviews and the theory of the technique is welldocumented in articles, works and books. There are many indications that the technology istheoretically useful in practice, with a very few criticisms of the technology. Despite all this,Model-based testing has not expanded in the IT industry.The purpose of this study is to find out what the reasons could be to the fact that MBTdid not succeed better in the industry. In this thesis, three different MBT tools are used totest and then compare whether the result in practice becomes as the theory describes the technique.The result of the study indicates the opposite direction and many shortcomings regardingModel-based testing come across.

No description available.

No description available.

This paper, on the identities shown in one of the cameos in Empress Josephine’s pearl and cameo diadem, has first of all focused on the mythological characters, and thereafter raised the question if these are to be seen as an allegory for people from the time. The process of identi-fication has followed the three levels in Panofsky’s method for analysing art, where the first and second levels consist of already known material from the Bernadotte Library, Royal Palace in Stockholm and the jeweller house of Chaumet (former Nitot et Fils) in Paris.                      To decipher both the mythological individuals and the possible allegories, that is the third level, the iconology itself, the thoughts and methods of  Göran Hermerén on the rise and fall of allegories along with Leora Auslander’s solutions using visuals comparisons, when no written material is available, have provided the academic framework for the study.                                When comparing the cameo with pieces of art from the time, the subject fits the description of the Roman mythology’s love goddess Venus and her son Cupid, the lovechild fathered by Mars. Moving on to allegories, well-known material shows that Emperor Napoleon was keen to be portrayed as the god of war Mars and Empress Josephine as Venus.  A portrait of special interest to the study, a rather private painting by Parent from 1807, which is probably still unknown to most people, shows how Josephine is depicted with a recently deceased grandchild, a young boy how was also the nephew of Napoleon’s, a close relative to them both, and in the line of  succession to the throne, while Napoleon still was Emperor. This picture has an expression which is close to the one of Venus and Cupid, and it is also made to look like a cameo. These portraits were known at the time when Napoleon gave the diadem to Josephine in 1809.                                                       Among portraits from the Napoleonic era, there has earlier only been one known painting, even if in two examples, where the diadem is shown. It is a miniature of Empress Josephine, a work from her final period at Malmaison, 1814. However, another miniature picturing the daughter Hortense in the very same piece of jewellery, from 1812, has now become known. In both these examples, the depicted cameo has a hight measuring only millimetres, why a discussion on the execution and the rendering has to be done with restraint. But in the daughter´s portrait there is a certain attempt to show the outlines of the central cameo that differs from the later painting of the Empress. This may be an indication of how much more important it was for the daughter to relay the picture of her mother and the memory of her son, in 1812, than it was for Josephine in 1814, after the divorce, probably after the fall of Napoleon too, when she was no longer his Venus, and there was no longer a throne for any of her grandsons to inherit.         Therefore, in short, the chosen methods give the answer that the mythology depicted is a scene of Venus and her son Cupid, and the allegorical interpretation of Venus is the Empress herself. The child in shape of Cupid here, may well be read as one of her daughter’s sons, at the time a much longed-for heir to the throne of Napoleon I.

The main purpose of this study of a pearl and cameo diadem, given by Napoleon to his first wife Josephine in 1809, is to follow its representation in portraiture from Paris in 1812 to Stockholm in 2010, and explore how the iconography develops during these 200 years. From the earlier years, the diadem is found only in miniatures, then after coming to the new royal family in Sweden, the Bernadottes, it is given a role of an heirloom representing history and families in grand paintings, arriving to the present well-known wedding hairpiece, covered by modern media, where the diadem is more of a crown than the open, forehead-covering piece of fashion jewellery it was during the Napoleonic era in France. The portraits from 1812, 1814, 1836, 1837, 1877, 1976, 2000/2003 and 2010 also portray a development of the female role model of its time. Just like the hair piece attains an iconography which comprises not only the highest dress codes but also a possibility of status transformation for the people involved in ceremony, the role of the country’s First Lady is about to change into a higher, more egalitarian position of present days.