Made available in DSpace on 2016-03-15T19:37:31Z (GMT). No. of bitstreams: 1 Rodrigo Cesar Ribeiro Miraglia.pdf: 2147088 bytes, checksum: 67087392fe4b03bb24d9a164fd92ceed (MD5) Previous issue date: 2010-08-20 / Fundo Mackenzie de Pesquisa / Sensors based on optical fibers are being increasingly used in hostile environments for measuring pressure, temperature, stress, chemical and biological parameters, etc. These sensors have the advantage of having reduced size and weight, immunity to electromagnetic interference, of being chemically inert, and also allowing the distributed measurement of the respective parameter along the fiber. Microstructured optical fibers have characteristics that are relevant to sensing applications, such as freedom of design of their internal structure obtained by varying the diameter of the holes and the distances between them, among other parameters, which is not applicable in conventional optical fibers. The present work aims to use a microstructured optical fiber as a distributed sensor for hydrostatic pressure, using the POTDR (Polarization Optical Time-Domain Reflectometry) and the OFDR (Optical Frequency-Domain Reflectometry) measurement techniques. The application of hydrostatic pressure on the fiber changes its birefringence and, consequently, the evolution of the states of polarization, which is the parameter monitored by the techniques. By monitoring the changes of these states, it is possible to infer the changes in applied pressure. The study is undertaken via simulations and analysis, both performed in the software MatLab. / Sensores baseados em fibras ópticas vêm sendo cada vez mais utilizados em ambientes hostis para medição de pressão, temperatura, stress, análise química e biológica, etc. Esses sensores têm a vantagem de possuírem tamanho e peso reduzidos, imunidade à interferência eletromagnética, de serem quimicamente inertes, e também permitirem a medição distribuída do parâmetro a ser analisado ao longo da fibra. As fibras ópticas microestruturadas possuem características relevantes na aplicação de sensoriamento, tal como a liberdade de construção de sua estrutura interna variando o diâmetro dos buracos e a distância entre eles, entre outros parâmetros, que não são aplicáveis em fibras ópticas convencionais. Este trabalho tem como objetivo estudar uma fibra óptica microestruturada como sensor distribuído de pressão hidrostática, utilizando as técnicas de medição POTDR (Polarization Optical Time-Domain Reflectometry) e OFDR (Optical Frequency-Domain Reflectometry). A aplicação de pressão hidrostática sobre a fibra altera sua birrefringência e, consequentemente, a evolução do seu estado de polarização, sendo este último o parâmetro monitorado pelas técnicas. Analisando-se a mudança deste estado, pode-se inferir a mudança de pressão aplicada. O estudo é realizado através de simulações e análises efetuadas no software MatLab.

Tesis por compendio / [ES] La fotónica de silicio es una tecnología emergente clave en redes de comunicación e interconexiones de centros de datos de nueva generación, entre otros. Su éxito se basa en la utilización de plataformas compatibles con la tecnología CMOS para la integración de circuitos ópticos en dispositivos pequeños para una producción a gran escala a bajo coste. Dentro de este campo, los interferómetros integrados juegan un papel crucial en el desarrollo de diversas aplicaciones fotónicas en un chip como sensores biológicos, moduladores electro-ópticos, conmutadores totalmente ópticos, circuitos programables o sistemas LiDAR, entre otros. Sin embargo, es bien sabido que la interferometría óptica suele requerir caminos de interacción muy largos, lo que dificulta su integración en espacios muy compactos. Para mitigar algunas de estas limitaciones de tamaño, surgieron varios enfoques, incluyendo materiales sofisticados o estructuras más complejas, que, en principio, redujeron el área de diseño pero a expensas de aumentar los pasos del proceso de fabricación y el coste. Esta tesis tiene como objetivo proporcionar soluciones generales al problema de tamaño típico de los interferómetros ópticos integrados, con el fin de permitir la integración densa de dispositivos basados en silicio. Para ello, aunamos los beneficios tanto de las guías de onda bimodales como de las estructuras periódicas, en términos de la mejora del rendimiento y la posibilidad para diseñar interferómetros monocanal en áreas muy reducidas. Más específicamente, investigamos los efectos dispersivos que aparecen en estructuras menores a la longitud de onda y en las de cristal fotónico, para su implementación en diferentes configuraciones interferométricas bimodales. Además, demostramos varias aplicaciones potenciales como sensores, moduladores y conmutadores en tamaños ultra compactos de unas pocas micras cuadradas. En general, esta tesis propone un nuevo concepto de interferómetro integrado que aborda los requisitos de tamaño de la fotónica actual y abre nuevas vías para futuros dispositivos basados en funcionamiento bimodal. / [CA] La fotònica de silici és una tecnologia emergent clau en xarxes de comunicació i interconnexions de centres de dades de nova generació, entre altres. El seu èxit es basa en la utilització de plataformes compatibles amb la tecnologia CMOS per a la integració de circuits òptics en dispositius diminuts per a una producció a gran escala a baix cost. Dins d'aquest camp, els interferòmetres integrats juguen un paper crucial en el desenvolupament de diverses aplicacions fotòniques en un xip com a sensors biològics, moduladors electro-òptics, commutadors totalment òptics, circuits programables o sistemes LiDAR, entre altres. No obstant això, és ben sabut que la interferometría òptica sol requerir camins d'interacció molt llargs, la qual cosa dificulta la seua integració en espais molt compactes. Per a mitigar algunes d'aquestes limitacions de grandària, van sorgir diversos enfocaments, incloent materials sofisticats o estructures més complexes, que, en principi, van reduir l'àrea de disseny però a costa d'augmentar els processos de fabricació i el cost. Aquesta tesi té com a objectiu proporcionar solucions generals al problema de grandària típica dels interferòmetres òptics integrats, amb la finalitat de permetre la integració densa de dispositius basats en silici. Per a això, combinem els beneficis tant de les guies d'ones bimodals com de les estructures periòdiques, en termes de funcionament d'alt rendiment per a dissenyar interferòmetres monocanal compactes en àrees molt reduïdes. Més específicament, investiguem els efectes dispersius que apareixen en estructures menors a la longitud d'ona i en les de cristall fotònic, per a la seua implementació en diferents configuracions interferomètriques bimodals. A més, vam demostrar diverses aplicacions potencials com a sensors, moduladors i commutadors en grandàries ultres compactes d'unes poques micres cuadrades. En general, aquesta tesi proposa un nou concepte d'interferòmetre integrat que aborda els requisits de grandària de la fotònica actual i obri noves vies per a futurs dispositius basats en funcionament bimodal. / [EN] Silicon photonics is a key emerging technology in next-generation communication networks and data centers interconnects, among others. Its success relies on the ability of using CMOS-compatible platforms for the integration of optical circuits into small devices for a large-scale production at low-cost. Within this field, integrated interferometers play a crucial role in the development of several on-chip photonic applications such as biological sensors, electro-optic modulators, all-optical switches, programmable circuits or LiDAR systems, among others. However, it is well known that optical interferometry usually requires very long interaction paths, which hinders its integration in highly compact footprints. To mitigate some of these size limitations, several approaches emerged including sophisticated materials or more complex structures, which, in principle, reduced the design area but at the expense of increasing fabrication process steps and cost. This thesis aims at providing general solutions to the long-standing size problem typical of optical integrated interferometers, in order to enable the densely integration of silicon-based devices. To this end, we combine the benefits from both bimodal waveguides and periodic structures, in terms of high-performance operation and compactness to design single-channel interferometers in very reduced areas. More specifically, we investigate the dispersive effects that arise from subwavelength grating and photonic crystal structures for their implementation in different bimodal interferometric configurations. Furthermore, we demonstrate various potential applications such as sensors, modulators and switches in ultra-compact footprints of a few square microns. In general, this thesis proposes a new concept of integrated interferometer that addresses the size requirements of current photonics and open up new avenues for future bimodal-operation-based devices. / Financial support is also gratefully acknowledged through postdoctoral FPI grants from Universitat Politècnica de València (PAID-01-18). European Commission through the Horizon 2020 Programme (PHC-634013 PHOCNOSIS project). The authors acknowledge funding from the Generalitat Valenciana through the AVANTI/2019/123, ACIF/2019/009 and PPC/2020/037 grants and from the European Union through the operational program of the European Regional Development Fund (FEDER) of the Valencia Regional Government 2014–2020. / Torrijos Morán, L. (2021). Photonic Applications Based on Bimodal Interferometry in Periodic Integrated Waveguides [Tesis doctoral]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/172163 / TESIS / Compendio

This semestral thesis deals with continuous monitoring of pulmonary ventilation during the patients' theraphy and focuses especially on monitoring of their ventilation processes. It is necessarry to detect, monitor and differentiate abdominal and thoracic breathing during the theraphy. This thesis describes the very basic and common method, a spirometry. Next, an overview of more advanced state-of-the-art methods based on both, tactile and proximity principles is given. In addition to that, two recently developed methods by BUT are discussed as well -- a tactile-based measurement similar to blood pressure sensor and a proximity-based measurement method employing TOF cameras. The data acquired by these two methods are proccesed and examined in order to evaluate and justify their performance in a real application.

<div>The manufacturing cost of solar cells along with their efficiency and reliability define the levelized cost of electricity (LCOE). One needs to reduce LCOE to make solar cells cost competitive compared to other sources of electricity. After a sustained decrease since 2001 the manufacturing cost of the dominant photovoltaic technology based on c-Si solar cells has recently reached a plateau. Further reduction in LCOE is only possible by increasing the efficiency and/or reliability of c-Si cells. Among alternate technologies, organic photovoltaics (OPV) has reduced manufacturing cost, but they do not offer any LCOE gain because their lifetime and efficiency are significantly lower than c-Si. Recently, perovskite solar cells have showed promising results in terms of both cost and efficiency, but their reliability/stability is still a concern and the physical origin of the efficiency gain is not fully understood.</div><div><br></div>In this work, we have collaborated with scientists industry and academia to explain the origin of the increased cell efficiency of bulk solution-processed perovskite cells. We also explored the possibility of enhancing the efficiency of the c-Si and perovskite cells by using them in a tandem configuration. To improve the intrinsic reliability, we have investigated 2D-perovskite cells with slightly lower efficiency but longer lifetime. We interpreted the behavior of the 2D-perovskite cells using randomly stacked quantum wells in the absorber region. We studied the reliability issues of c-Si modules and correlated series resistance of the modules directly to the solder bond failure. We also found out that finger thinning of the contacts at cell level manifests as a fake shunt resistance but is distinguishable from real shunt resistance by exploring the reverse bias or efficiency vs. irradiance. Then we proposed a physics-based model to predict the energy yield and lifetime of a module that suffers from solder bond failure using real field data by considering the statistical nature of the failure at module level. This model is part of a more comprehensive model that can predict the lifetime of a module that suffers from more degradation mechanisms such as yellowing, potential induced degradation, corrosion, soiling, delamination, etc. simultaneously. This method is called forward modeling since we start from environmental data and initial information of the module, and then predict the lifetime and time-dependent energy yield of a solar cell technology. As the future work, we will use our experience in forward modeling to deconvolve the reliability issues of a module that is fielded since each mechanism has a different electrical signature. Then by calibrating the forward model, we can predict the remaining lifetime of the fielded module. This work opens new pathways to achieve 2030 Sunshot goals of LCOE below 3c/kWh by predicting the lifetime that the product can be guaranteed, helping financial institutions regarding the risk of their investment, or national laboratories to redefine the qualification and reliability protocols.<br>

<div>Inorganic metal chalcogenide materials are of great importance in the semiconducting field for various electronic applications such as photovoltaics, thermoelectrics, sensors, and many others. Compared to traditional vacuum processing routes, solution processing provides an alternate cost-effective route to synthesize these inorganic materials through its ease of synthesis and device fabrication, higher material utilization, mild processing conditions, and opportunity for roll-to-roll manufacturing. One such versatile solution chemistry involving a mixture of amine and thiol species has evolved in the past few years as a common solvent for various precursor dissolutions including metal salts, metal oxides, elemental metals, and chalcogens.</div><div><br></div><div>The amine-thiol solvent system has been used by various researchers for the fabrication of inorganic materials, but without the complete understanding of the chemistry involved in this system, utilizing its full potential, and overcoming any inherent limitations will be difficult. So, to identify the organometallic complexes and their reaction pathways, the precursor dissolutions in amine-thiol solutions, specifically for elemental metals like Cu, In and chalcogens like Se, Te were studied using X-ray absorption, nuclear magnetic resonance, infrared, and Raman spectroscopy along with electrospray ionization mass spectrometry techniques. These analyses suggested the formation of metal thiolate complexes in the solution with the release of hydrogen gas in the case of metal dissolutions confirming irreversibility of the dissolution. Insights gained for chalcogen dissolutions confirmed the formation of different species like monoatomic or polyatomic clusters when different amine-thiol pair is used for dissolution. Results from these analyses also identified the role of each component in the dissolution which allowed for tuning of the solutions by isolating the complexes to reduce their reactivity and corrosivity for commercial applications.</div><div><br></div><div>After identifying complexes in metal dissolution for Cu and In metals, the decomposition pathway for these complexes was studied using X-ray diffraction and gas chromatography mass spectrometry techniques which confirmed the formation of phase pure metal chalcogenide material with a release of volatile byproducts like hydrogen sulfide and thiirane. This allowed for the fabrication of impurity-free thin-film Cu(In,Ga)S2 material for use in photovoltaic applications. The film fabrication with reduced carbon impurity achieved using this solvent system yielded a preliminary promising efficiency beyond 12% for heavy alkali-free, low bandgap CuInSe2 material. Along with promising devices, by utilizing the understanding of the chalcogen complexation, a new method for CuInSe2 film fabrication was developed with the addition of selenide precursors and elemental selenium which enabled first-ever fabrication of a solution-processed CuInSe2 thin film with thickness above 2 μm and absence of any secondary fine-grain layer.</div><div><br></div><div>Along with thin-film fabrication, a room temperature synthesis route for lead chalcogenide materials (PbS, PbSe, PbTe) with controlled size, shape, crystallinity, and composition of nanoparticle self-assemblies was demonstrated. Micro-assemblies formed via this route, especially the ones with hollow-core morphology were subjected to a solution-based anion and cation exchange to introduced desired foreign elements suitable for improving the thermoelectric properties of the material. Adopting from traditional hot injection and heat up synthesis routes, a versatile synthesis procedure for various binary, ternary, and quaternary metal chalcogenide (sulfide and sulfoselenide) nanoparticles from elemental metals like Cu, Zn, Sn, In, Ga, and Se was developed. This new synthesis avoids the incorporation of impurities like O, Cl, I, Br arising from a traditional metal oxide, halide, acetate, or other similar metal salt precursors giving an opportunity for truly impurity-free colloidal metal chalcogenide nanoparticle synthesis.</div>

Tesis por compendio / El presente proyecto de investigación está enfocado al desarrollo de sensores químicos fluoro-cromogénicos, para la detección y determinación de especies químicas de interés biológico, industrial y medioambiental de forma selectiva y con alta sensibilidad. En forma general, se busca el diseñar nuevos sistemas sensores basados en compuestos (receptores) formados por dos unidades: una unidad coordinante que interacciona con el anión a determinar y una unidad generadora de señal que alerta del reconocimiento molecular efectuado. Durante este estudio se están preparando diversas moléculas receptoras funcionalizandas con grupos modificadores de estructura para evaluar su influencia sobre las capacidades de detección y selectividad como receptores de especies específicas en diferentes condiciones y medios. Las diferentes aproximaciones en prueba implican a su vez el diseño y síntesis molecular, así como el análisis de las diferentes señales ópticas producidas en el reconocimiento, con el fin de diseñar sistemas de alta eficacia y eficiencia, y con posibilidades reales de aplicación. / Santos Figueroa, LE. (2014). New approaches for the development of chromo-fluorogenic sensors for chemical species of biological, industrial and environmental interest [Tesis doctoral]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/43216 / TESIS / Premios Extraordinarios de tesis doctorales / Compendio

<div>Increasing flexibility of light manipulation is vital for various domains including both biomedical and military applications, where a lack of photon control could become critical. The efforts conducted and projected within this proposal are focused on three major areas: semi-continuous planar thin film photomodification for infrared (IR) filtering, nanosphere core-shell structures for obscurance, and all-dielectric sub-wavelength focal lenses for advanced IR sensing.Through a collaborative effort with the Army Research Office, we advanced the tunability of planar plasmonic filters with cutoff wavelengths in the 10–16μm range with photomodification using a 10.6μm CO2laser. Surface-enhanced molecular absorption in concert with three-dimensional (3D) Au nano-structures with inherent broad absorption in the IR band was a novel approach utilized to create such planar filters.Expanding on these, efforts and the results of the 2-dimensional (2D) semicontinuous Au plasmonic planar filtering, we further advanced our research with 3D Au nano-coreshell structures to enable levitated long-wavelength pass filter obscurants. We exploited the radiative effects of Au nano-structures that mimic conventional apertures or antennas, though these structures are on the nanometer scale and demonstrated the filtering characteristics through flow cell.In parallel with our plasmonic filtering we designed, manufactured and tested low loss dielectric microlenses for IR radiation based on a dielectric metasurface layer by patterning a SI substrate and etching to sub-micron depths. For a proof-of-concept lens demonstration,we chose a fine patterned array of nano-pillars with variable diameters.Merging our plasmonic filtering and dielectric microlens efforts, we created a holographic lenslet by designing and simulating a low loss focusing metasurface lens with engineered nano-scaled features to converge off-axis IR radiation. An array of nano-pillars with varied diameter and fixed height and periodicity was chosen for ease of fabrication with single layer etching</div>

Wildfires destroy large tracts of veld and forest land every year in South Africa. These fires can be devastating, resulting in loss of human lives, the destruction of property and the loss of income, for example the forest fire in the Sabie district in Mpumalanga in 2007 which destroyed about 7% of South Africa’s forested areas. There are frequently legal disputes with respect to the origin of wildfires, the extent of the fire and the land cover destroyed by the fires. The forensic capabilities of remote sensing in detecting and analysing post-wildfire characteristics have become an important contribution towards solving such legal disputes and in understanding wildfire characteristics. These post fire products can be used as evidence in court cases. Most of the time those court cases came up a few years after the fire event. By then, little or no evidence can be found on the terrain where the fire was. Remote sensing archives provide a reliable source of data that can be used to analyse these events after these long intervals. The objective of this project is to highlight the methods used to generate these post-wildfire analysis products. / Environmental Sciences / M. Sc. (Environmental Science)

Wildfires destroy large tracts of veld and forest land every year in South Africa. These fires can be devastating, resulting in loss of human lives, the destruction of property and the loss of income, for example the forest fire in the Sabie district in Mpumalanga in 2007 which destroyed about 7% of South Africa’s forested areas. There are frequently legal disputes with respect to the origin of wildfires, the extent of the fire and the land cover destroyed by the fires. The forensic capabilities of remote sensing in detecting and analysing post-wildfire characteristics have become an important contribution towards solving such legal disputes and in understanding wildfire characteristics. These post fire products can be used as evidence in court cases. Most of the time those court cases came up a few years after the fire event. By then, little or no evidence can be found on the terrain where the fire was. Remote sensing archives provide a reliable source of data that can be used to analyse these events after these long intervals. The objective of this project is to highlight the methods used to generate these post-wildfire analysis products. / Environmental Sciences / M. Sc. (Environmental Science)

<p>The development of low-cost, and reliable platforms for on-site detection of pathogenic agents, and toxic environmental traces is still a critical need for real-time monitoring of potential environmental pollution and imminent outbreaks. The biosensors market is projected to attain 31.5 billion by 2024. In this landscape, colorimetric and electrochemical devices continue to have significant relevance, with paper-based platforms leading the point-of-care (POC) segment for pathogen detection and environmental monitoring.</p> <p>Despite the true potential of biosensors in general, they have witnessed a slow rate in commercialization, mainly due to cost restrictions, and concerns related to their reliability and repeatability once scaled-up. This research evaluates the implementation of printing techniques as a strong approach for the fabrication of paper-based and flexible electrochemical biosensors. The results obtained demonstrated the ability to control and predict the variables affecting the sensing performance, achieving high precision of the printing parameters, and allowing optimization, and iterations since very early stages of prototype development.</p> <p>Besides the novel fabrication approach, this work introduces the use of truncated aptameric DNA sequences for whole cell detection of E. coli O157:H7 and heavy metals (Hg2+ and As3+), providing evidence of high stability and robustness under harsh conditions. Results obtained demonstrate their equal or even superior performance when compared to antibodies.</p> <p>We established the use of aptamer-functionalized multilayered label particles (PEI-grafted gold decorated polystyrene) with high stability as label particles. These particles address the well known drawback of non-selective aggregation typical of traditional naked Gold nanoparticles. The outstanding stability of these multilayered labels was demonstrated when used in an enhanced version of the lateral flow assay for detection of E. coli O157:H7 (state of the art for paper-based colorimetric detection of whole cell bacteria), and in a multiplexed paper-based microfluidic device for dual detection of Mercury and Arsenic. This work sets the foundation of the development of a next generation of health care and environmental monitoring devices that are portable, sensitive, quantitative, and can reliably detect multiple targets with one single test.</p>