In this thesis, the preparation of new photoactive substances containing mono- and bipyridines coordinated to ruthenium is presented together with initial evaluations of their photoelectrochemical and photophysical properties. Complexes of the type Ru(bpy)2(4-X-py)2 (X = SH, COOH) were prepared and used in Grätzel-type solar cells based on ZnO. The results show that the thiol complex binds to the surface but give rather low solar cell efficiencies. Different routes to obtain Ru(bpy)2(4,4´-dithio-2,2´-bipyridine) were evaluated, among them substitution reactions on 4,4´-dichloro-2,2´-bipyridine coordinated to ruthenium. Due to reactivity issues, the target sulphur-containing complex has not yet been obtained. The synthesis of methanofullerenes, fulleropyrrolidines and –pyrazolines are presented, among them dyads containing Ru(bpy)n-units. A common feature for the dyads is the unusually short linkers between the fullerene and the ruthenium complex. Dyad preparations were in some cases simplified by carrying out the reactions in the presence of silver salts. A preliminary evaluation of the emission of the dyads showed almost complete quenching of the excited state of a pyrrolidine-based dyad, whereas emission remained from the pyrazoline-based ones. Whether this was due to incomplete quenching of the excited states of the ruthenium complex, or induced by the presence of hydrazones has yet to be revealed. The use of fullerene-substituted malonic acid and its ethyl ester as dyes in Grätzel-type solar cells resulted in even lower efficiencies (IPCE) than for bare TiO2. This could be due to electron transfer in the reverse direction compared to what is observed for ruthenium complexes. Thus, these fullerene derivatives are not suitable as sensitisers for Grätzel-type solar cells.

In this thesis, the improved synthesis and investigations into the properties of some 3,7-diazabicyclo[3.3.1]nonane (bispidine) derivatives are described. These compounds are structurally related to the naturally occurring lupanine alkaloids, they are of interest because of their cardiac antiarrhythmic function as well as their use as bases or ligands in organic chemical reactions. Their chemical properties are related to the presence of a rigid molecular scaffold with two nitrogen atoms that can be utilized for binding interactions with a variety of Lewis acids. An improved synthesis has been developed, providing access to bispidines via bispidinones while avoiding the use of highly toxic hydrazine, which is required as reducing agent in alternative methods. A series of bispidine derivatives with a variety of substituents were characterized regarding their basicity, which spans thirteen orders of magnitude. Correlations between structure and basicity are discussed and computational methods have been used to propose further derivatives with even higher basicity. The structures of several bispidine derivatives and their protonated forms have been characterized in the solid state by X-ray crystallography and in solution using NMR spectroscopy. Structure and solution dynamics in a sterically congested (π-allyl)palladium complex with a bispidine ligand have been investigated, revealing mechanistic insight into the dynamic process. Using a bulky bispidine as a temporary ligand for a (η3-propenyl) palladium complex, the novel adamantanoid [{(η3-propenyl)Pd}6(μ3-OH)4] cluster was prepared.

This thesis describes a number of synthetic approaches for obtaining chiral, enantiomerically pure natural products, in particular some semiochemicals. This has been accomplished by using various strategies; by starting from compounds from the chiral pool, by using chiral auxiliaries, via enzymatic resolutions or by chemical asymmetric synthesis. Hence, the sexual pheromone of Microdiprion pallipes, a propanoate ester of one or several isomers of 3,7,11-trimethyltridecan-2-ol, was synthesised, both as a mixture of all isomers and as the sixteen pure, individual stereoisomers. These compounds were obtained by joining different enantiopure building blocks stemming from the chiral pool. When compared with some synthetic blends, both the propanoate esters of the stereoisomeric erythro-3,7,11-trimethyltridecan-2-ols originally found in the extract from the female of M. pallipes, surprisingly, showed lower activities in biological studies. Indeed, the propanoates of two threo-isomers gave significantly higher responses in biological tests, than did the propanoates of the two natural erythro-ones. Because the synthetic strategy used earlier was not very efficient for the preparation of the threo-isomers of 3,7,11-trimethyltridecan-2-ol, we were encouraged to look for alternative synthetic approaches. The new synthetic strategy chosen led us to two key synthetic building blocks, an O-protected derivative of (2S,3S)-3-methyl-4-(phenylsulfonyl)butan-2-ol butanol and (3R,7R)-1-iodo-3,7-dimethylnonane. Deprotonation of the former followed by alkylation with the latter should give a compound with the desired carbon skeleton. For efficient preparation of the first building block, we developed a new diastereoselective addition reaction of dialkylzincs to some chiral aldehydes, the products of which were diastereomerically enriched 1,2-dialkyl-alkanols. Using this method, each enantiomer of the desired building block was obtained via efficient diastereoselective addition of dimethylzinc to each enantiomer of a 2-methylaldehyde. The resulting product, a diastereomerically and enantiomerically highly enriched 3-methyl-2-alkanol was further purified by enzyme catalysed acylation followed by some functional group interconversions. The second building block was prepared via convergent multistep synthesis, starting from a single, enantiomerically pure compound, (R)-2-methylsuccinic acid 4-t-butyl ester, derived from the chiral pool. The two enantiomerically pure building blocks, so obtained, were coupled together. Some additional functional group manipulations of the product produced furnished the desired isomer, which had shown the highest activity in field tests of the M. pallipes, namely the propanoate ester of (2S,3R,7R,11R)-3,7,11-trimethyltridecan-2-ol. This thesis describes a number of synthetic approaches for obtaining chiral, enantiomerically pure natural products, in particular some semiochemicals. This has been accomplished by using various strategies; by starting from compounds from the chiral pool, by using chiral auxiliaries, via enzymatic resolutions or by chemical asymmetric synthesis. Hence, the sexual pheromone of Microdiprion pallipes, a propanoate ester of one or several isomers of 3,7,11-trimethyltridecan-2-ol, was synthesised, both as a mixture of all isomers and as the sixteen pure, individual stereoisomers. These compounds were obtained by joining different enantiopure building blocks stemming from the chiral pool. When compared with some synthetic blends, both the propanoate esters of the stereoisomeric erythro-3,7,11-trimethyltridecan-2-ols originally found in the extract from the female of M. pallipes, surprisingly, showed lower activities in biological studies. Indeed, the propanoates of two threo-isomers gave significantly higher responses in biological tests, than did the propanoates of the two natural erythro-ones. Because the synthetic strategy used earlier was not very efficient for the preparation of the threo-isomers of 3,7,11-trimethyltridecan-2-ol, we were encouraged to look for alternative synthetic approaches. The new synthetic strategy chosen led us to two key synthetic building blocks, an O-protected derivative of (2S,3S)-3-methyl-4-(phenylsulfonyl)butan-2-ol butanol and (3R,7R)-1-iodo-3,7-dimethylnonane. Deprotonation of the former followed by alkylation with the latter should give a compound with the desired carbon skeleton. For efficient preparation of the first building block, we developed a new diastereoselective addition reaction of dialkylzincs to some chiral aldehydes, the products of which were diastereomerically enriched 1,2-dialkyl-alkanols. Using this method, each enantiomer of the desired building block was obtained via efficient diastereoselective addition of dimethylzinc to each enantiomer of a 2-methylaldehyde. The resulting product, a diastereomerically and enantiomerically highly enriched 3-methyl-2-alkanol was further purified by enzyme catalysed acylation followed by some functional group interconversions. The second building block was prepared via convergent multistep synthesis, starting from a single, enantiomerically pure compound, (R)-2-methylsuccinic acid 4-t-butyl ester, derived from the chiral pool. The two enantiomerically pure building blocks, so obtained, were coupled together. Some additional functional group manipulations of the product produced furnished the desired isomer, which had shown the highest activity in field tests of the M. pallipes, namely the propanoate ester of (2S,3R,7R,11R)-3,7,11-trimethyltridecan-2-ol. This thesis describes a number of synthetic approaches for obtaining chiral, enantiomerically pure natural products, in particular some semiochemicals. This has been accomplished by using various strategies; by starting from compounds from the chiral pool, by using chiral auxiliaries, via enzymatic resolutions or by chemical asymmetric synthesis. Hence, the sexual pheromone of Microdiprion pallipes, a propanoate ester of one or several isomers of 3,7,11-trimethyltridecan-2-ol, was synthesised, both as a mixture of all isomers and as the sixteen pure, individual stereoisomers. These compounds were obtained by joining different enantiopure building blocks stemming from the chiral pool. When compared with some synthetic blends, both the propanoate esters of the stereoisomeric erythro-3,7,11-trimethyltridecan-2-ols originally found in the extract from the female of M. pallipes, surprisingly, showed lower activities in biological studies. Indeed, the propanoates of two threo-isomers gave significantly higher responses in biological tests, than did the propanoates of the two natural erythro-ones. Because the synthetic strategy used earlier was not very efficient for the preparation of the threo-isomers of 3,7,11-trimethyltridecan-2-ol, we were encouraged to look for alternative synthetic approaches. The new synthetic strategy chosen led us to two key synthetic building blocks, an O-protected derivative of (2S,3S)-3-methyl-4-(phenylsulfonyl)butan-2-ol butanol and (3R,7R)-1-iodo-3,7-dimethylnonane. Deprotonation of the former followed by alkylation with the latter should give a compound with the desired carbon skeleton. For efficient preparation of the first building block, we developed a new diastereoselective addition reaction of dialkylzincs to some chiral aldehydes, the products of which were diastereomerically enriched 1,2-dialkyl-alkanols. Using this method, each enantiomer of the desired building block was obtained via efficient diastereoselective addition of dimethylzinc to each enantiomer of a 2-methylaldehyde. The resulting product, a diastereomerically and enantiomerically highly enriched 3-methyl-2-alkanol was further purified by enzyme catalysed acylation followed by some functional group interconversions. The second building block was prepared via convergent multistep synthesis, starting from a single, enantiomerically pure compound, (R)-2-methylsuccinic acid 4-t-butyl ester, derived from the chiral pool. The two enantiomerically pure building blocks, so obtained, were coupled together. Some additional functional group manipulations of the product produced furnished the desired isomer, which had shown the highest activity in field tests of the M. pallipes, namely the propanoate ester of (2S,3R,7R,11R)-3,7,11-trimethyltridecan-2-ol. / QC 20101026

This thesis investigates three different surface modifications, and the route to design and synthesize them. The thesis is therefore divided into three sub- projects. (i.) Design and synthesis of a peptide which secondary structure could be controlled by a negatively charged surface. (ii.) Design and synthesis of a cyclic peptide, that would self-organize prior to surface interaction, using the type I anti-freeze protein of a winter flounder as template. (iii.) The use of solid-phase synthesis to make the synthesis of SAM-molecules easier.

<p>This thesis describes the syntheses of semiochemicals and their applications in the development of control methods for pest insects. The compounds synthesized are divided into three groups: 1) Lepidoptera pheromones; 2) methyl substituted chiral pheromones and 3) aphid pheromones. </p><p>Different purification techniques have been explored in order to provide > 99% pure semiochemicals for field tests. Examples of the techniques are uses of urea inclusion complexes, argentum chromatography, low temperature crystallization and what we call the Baeckström isolation technique.</p><p>Iridoids have been produced in a synthetic strategy including an intramolecular enal-enamine [4+2] cycloaddition, a dynamic acetylation and an enantioselective transesterification mediated by a lipase from Pseudomonas cepacia. The use of chiral auxiliaries to perform the intramolecular [4+2] cycloaddition has also been investigated. A useful asymmetric route to iridoids has been developed.</p>

This thesis addresses the synthesis of organic compounds, some of them are derivatives of compounds with DNA binding properties, for potential use in targeted nuclide therapy. The compounds synthesized therefore also need to contain potent nuclides. Here the nuclides considered are the radionuclide 125I, and the stable isotope 10B, which becomes radioactive upon neutron activation. 125I is an Auger-electron emitter, which emits particles that can travel only about 1-2 µm through human tissue and hence has to be delivered to the cancer cell nucleus to cause DNA damage. Neutron activated 10B emits highly cell killing α-particles and 7Li3+ ions, the application of which in Boron Nuclide Capture Therapy (BNCT) has proven very promising. The thesis can be divided into three parts: i) A nido-carborate, 7-(3´-ammoniopropyl)-7,8-dicarba-nido-undecaborate(-1), has been synthesized and radioiodinated for use as a pendant group for attachment of 125I to tumor-seeking macromolecules. Radiolabeling was achieved in greater than 95% yield. ii) Both enantiomers of m-carboranylalanine, a carborane analogue of phenylalanine, have been prepared in high enantiomeric excess, and are of potential interest in BNCT. The synthesis involved amination of the N-acyl derivative formed from [3-(1,7-dicarba-closo-dodecarborane(12)-1-yl)-2-propanoic acid and Oppolzer’s camphor sultam. iii) Derivatives of the DNA intercalating compounds 9-aminoacridine, daunorubicin and doxorubicin have been synthesized and labeled with 125I. The 9-aminoacridines were synthesised with a variety of functional groups such as carboxyl, amino and hydroxyl. The anthracylines daunorubicin and doxorubicin are efficient chemotherapeutic agents; the synthesis routes of ester, amide and amine derivatives of these compounds are presented. The Chloramine T method was used for the radioiodinations, and the radioiodination precursors of both the acridine and the anthracycline derivatives, were made to contain either a trimethylstannyl group or a phenolic substituent. In the former case the trimethylstannyl group was replaced by 125I, and in the latter case, the compounds were radiolabeled directly at the o- position to the phenolic hydroxyl group. Both methods gave high radiolabeling yields.

Kemi är ett ämne som anses av många vara svårt. Syftet med det här arbetet är att få en fördjupad inblick i hur kemi skiljer sig mellan IB-programmet och naturvetenskapliga programmet. Metoden som används är en litteraturanalys av ämnesplan och läromedel. En jämförelse gjordes mellan läromedlen sinsemellan och likaså för ämnesplanen. Utgångspunkten för studien var i följande frågeställningar; hur presenteras halogenalkaner i ämnesplanen respektive läromedlen samt hur miljöperspektivet skiljer sig åt mellan läromedlen. Böckerna som analyserats är från förlagen Pearsons (IB) och Gleerups. Resultatet av studien visade att det finns stora skillnader mellan både ämnesplanen och läromedlen. I de svenska ämnesplanerna är lärandemålen översiktligt beskrivna. Ämnesplanen för IB-kemin är däremot mycket specifik. läromedlen skiljer sig också åt mycket. Läromedeljämförelsen visade att IB-kemin är innehållsrik med fokus på ämneskunskaperna av ren kemi medan svenska kemin fokuserar på miljö- och hållbar utveckling.

Denna studie studerar hur organisk tillväxt påverkar en stor organisations identitet och vidare hur den organiska tillväxten påverkar samspelet mellan organisationens identitet och ett företags medarbetarerbjudande. För att undersöka studiens syfte har en fallstudie genomförts på ett stort teknikkonsultföretag som uteslutande vuxit genom organisk tillväxt. Åtta semistrukturerade intervjuer har genomförts med anställda på företaget, detta för att fånga de karaktärsdrag som kan illustrera teknikkonsultföretagets identitet. Empirin visar att följande fem karaktärsdrag: företagets storlek, ägarform och struktur, frihet och flexibilitet, utvecklingsmöjligheter samt hjälpsamhet och öppenhet kan beskriva organisationens identitet. Hur den organiska tillväxten har påverkat teknikkonsultföretagets identitet har främst visat sig genom en ökad anonymitet, en minskad flexibilitet samt en något högre grad av hierarki. Dessutom kan den organiska tillväxten eventuellt bidragit till större utvecklingsmöjligheter. Dock har stora delar av identiteten bevarats vilket kan bero på teknikkonsultföretagets ägarform, en mindre genomförd omorganisation samt att företagets värderingar i form av värdeord genomsyrar och efterlevs i verksamheten.

<p>This thesis deals with the synthesis and characterisation of a series of dinuclear manganese complexes. Their ability to donate electrons to photo-generated ruthenium(III) has been investigated in flash photolysis experiments followed by EPR-spectroscopy. These experiment shows several consecutive one-electron transfer steps from the manganese moiety to ruthenium(III), that mimics the electron transfer from the oxygen evolving centre in photosystem II.</p><p>The redox properties of these complexes have been investigated with electro chemical methods and the structure of the complexes has been investigated with different X-ray techniques. Structural aspects and the effect of water on the redox properties have been shown.</p><p>One of the manganese complexes has been covalently linked in a triad donor-photosensitizer-acceptor (D–P–A) system. The kinetics of this triad has been investigated in detail after photo excitation with both optical and EPR spectroscopy. The formed charge separated state (D^––P–A⁺) showed an unusual long lifetime for triad based on ruthenium photosensitizers.</p><p>The thesis also includes a study of manganese-salen epoxidation reactions that we believe can give an insight in the oxygen transfer mechanism in the water oxidising complex in photosystem II.</p>

<p>Electric current is known to flow through the π-bonds in oligothiophenes. In order to use them as molecular wires it is important to use a technique where the potential gradients can be generated and maintained in supramolecular networks. A solution to this problem can be the use of metal complexes as junction points within such a network.</p><p> In this project pathways to synthesize 2-thia-7,8-diaza-cyclopenta[<em>l</em>]phenanthrene <strong>(1)</strong> and 1-thia-7,8-diaza-cyclopenta[<em>l</em>]phenanthrene <strong>(2)</strong> for use in molecular electronic devices have been investigated. 4-(5-Bromo-thiophen-2-yl)2,2’-bipyridine <strong>(3)</strong> was prepared via Kröhnke reaction from 3-(5-bromothiophene-2-yl)acrolein and 1-(2-Oxo-2-pyridine-2-yl-ethyl)-pyridinium iodide in an overall yield of 14 %.  </p><p> Several routes towards 2-thia-7,8-diaza-cyclopenta[<em>l</em>]phenanthrene (<strong>1)</strong> and 1-thia-7,8-diaza-cyclopenta[<em>l</em>]phenanthrene <strong>(2) </strong>were tested. Since the original planned pathway did not work, lack of time made it impossible to complete the series of experiments that were needed. The synthesis of 2-thia-7,8-diaza-cyclopenta[<em>l</em>]phenanthrene (<strong>1) </strong>is almost finished. Due to the solvation problems, after the decarboxylation step, the product could not be analyzed by ¹H-NMR in a satisfactory manner. The product was sent for analysis.</p><p> A number of experiments towards 1-thia-7,8-diaza-cyclopenta[<em>l</em>]phenanthrene <strong>(2) </strong>were tested but few of them worked as planned. There is a lot of work left to be done in the synthesis of this compound but the lack of time made it impossible.</p><p> The chemistry that has been achieved is the synthesis of 1,10-phenanthroline-5,6-dione in the synthesis of 2-thia-7,8-diaza-cyclopenta[<em>l</em>]phenanthrene (<strong>1)</strong>. The following Hinsberg thiophene synthesis probably worked but due to solvation problems the product could not be isolated. The final product after hydrolysis and decarboxylation of the remaining ester groups after the Hinsberg thiophene synthesis was tested but the results were difficult to confirm.</p><p> In the synthesis of 1-thia-7,8-diaza-cyclopenta[<em>l</em>]phenanthrene <strong>(2)</strong> several attempts to make 3,4-diamino-<em>N,N</em>-diethyl-benzamide were made. The attack from the primary amines on the carbonyl carbon made it necessary to protect them. The attempt to synthesize 3,4-bis-acetylamino-<em>N,N</em>-diethyl-benzamide also failed, both the attempt directly from the carboxylic acid and through the acylchloride, even though the amines were protected.  </p>