Spelling suggestions: "subject:"rrr"" "subject:"1rr""
1 |
James L. Orr the Civil War and reconstruction years /Leemhuis, Roger P. January 1900 (has links)
Thesis (Ph. D.)--University of Wisconsin--Madison, 1970. / Typescript. Vita. eContent provider-neutral record in process. Description based on print version record. Includes bibliographical references.
|
2 |
C.W. Orr : the "unknown song writer" /Wilson, Jane. January 1976 (has links) (PDF)
Thesis (M.Mus.) - University of Adelaide, Department of Music, 1979.
|
3 |
Redox shuttle and positive electrode protection for Li-O2 systems / Médiateur Redox et protection d'Electrode Positive pour système Li-O2Blanchard, Rémi 15 December 2017 (has links)
Les travaux de cette thèse focalisent sur la résolution de deux problèmes majeurs des électrodes positives de systèmes Li-O2, dus à la nature du produit de décharge formé pendant la réaction de réduction de l'oxygène, en milieux Li+ : Lithium peroxyde (Li2O2). Le premier problème est lié au processus de formation de ce dernier (étapes successives de nucléation électrochimiques et de dismutation chimique d'un intermédiaire : le superoxide de lithium), qui conduit à la formation de très grosses particules de peroxyde lithium à la surface de l'électrode. Du fait de leurs taille et de leur résistivité ( le gap du peroxyde de lithium est de 5 eV), il est impossible de recharger de manière efficace et à 100% ce dernier. Cependant, ce problème peut être résolu, grâce à l'ajout d'un additif, qui permet le transport d'électron en solution, et qui peut (en théorie), recharger les particules de Li2O2, détachées de l'électrode. Un très bon candidat a été trouvé dans cette étude, qui a prouvé de très bonne performances pour l'amélioration du processus de recharge, et un effet bénéfique supplémentaire a été caractérisé sur le potentiel de décharge, grâce à un effet catalytique (augmentation du potentiel de réduction de 230 mV). Cependant, cette solution demande de repenser totalement le design actuel des systèmes Li-O2, car ce composé (soluble) peut facilement traverser le séparateur, vers l'électrode de lithium (et causer une autodécharge importante ainsi qu'une boucle de recharge infinie). Le second problème est lié à une autre caractéristique du peroxyde de lithium : sa réactivité. De fait, c'est un base forte au sens de Lewis (en accord avec la théorie HSAB), et réagit de manière importante avec les constituants de l'électrodes (réactivité avec le liant PVDF, mais aussi avec les solvant, le sel et le support carboné de l'électrode). Il est donc nécessaire de trouver un moyen de protéger ce dernier, et une solution proposé dans ce manuscrit a été de réaliser la déposition d'une couche nanométrique de Nb2O5, qui a pour but d'éviter tout contact direct entre le carbone, et le peroxyde de lithium (réaction entre ces deux derniers, qui conduit à la formation d'un composé avec un gap de 7 eV : le carbonate de lithium). Le dépôt fut étudié sur un carbone graphitisé (Zoltek Panex 30) qui, de manière surprenante, a été très résistant versus le peroxyde de lithium. Malheureusement, la présence du dépôt à la surface du tissus n'a pas protégé l'électrode, mais a plutôt eu l'effet inverse, car des traceurs de la formation de carbonate de lithium ont pu être observé (alors qu'aucun traceur n'était détecté sur le tissu nu). Le Nb2O5 a donc été écarté, et d'autres composés doivent être testés dans de futures études, pour cette application. / The present PhD work focuses on solving two major issues of the Li-O2 positive electrodes, both being linked with the nature of the discharge product formed during the Oxygen Reduction Reaction, in Lithium cation electrolyte: Lithium peroxide (Li2O2). The first issue is related to the Discharge mechanism (consecutives Electrochemical nucleation and chemical disproportionation of an intermediate, lithium superoxide), which lead to the formation of large particles of lithium peroxide on the electrode surface. Owing to their size and resistivity (bandgap of lithium peroxide : 5 eV), it is nearly impossible to re-charge efficiently the electrode. This issue can be solved, thanks to the dissolution of an additive in solution, that promote the transport of electrons, and allow the oxidation of large discharge particles (in theory, even the ones disconnected from the electrode). A very good compound was found to efficiently work as a redox shuttle (enhanced Oxygen Evolution reaction), with also a highly beneficial effect for the ORR, with a catalysis effect that allowed to increase the onset of the ORR of 230 mV. However, this solution require a engineering of the practical system as this additive could cross from the positive electrode to the negative side (lithium) and trigger capacity loss and infinite charging loop. The second issue is linked to its reactivity. As a matter of fact, it is an hard base (according to HSAB theory), which reacts readily with a large panel of electrodes component (reactivity toward the PvDf binder, solvent, salts, but also with the carbon material, used as the positive electrode). As such, it is necessary to find a way to protect the latter, and a solution proposed in this work was to use Atomic Layer deposition of Niobium pentoxide (Nb2O5), in order to form a very thin deposit, which was supposed to prevent any contact between the discharge product, and the carbon support (consumption of Carbon, with formation of a large bandgap compound : Lithium carbonate). The deposition was conducted onto a graphitized carbon cloth (Zoltek Panex 30), which surprisingly proved to be highly resistant toward lithium peroxide. Sadly, the presence of the deposit did not protect the electrode but rather made it weaker, with tracers of the formation lithium carbonate. This compound was thus not considered anymore, and others deposits are yet needed to be tested in future studies.
|
4 |
Book Review of Fiona Ritchie and Doug Orr: Wayfaring Strangers: The Musical Voyage from Scotland and Ulster to AppalachiaOlson, Ted 01 November 2016 (has links)
Review of Fiona Ritchie and Doug Orr: Wayfaring Strangers: The Musical Voyage from Scotland and Ulster to Appalachia
|
5 |
Investigation of the Double-Trap Intrinsic Kinetic Equation for the Oxygen Reduction Reaction and its implementation into a Membrane Electrode Assembly model.Moore, Michael Unknown Date
No description available.
|
6 |
Synthesis and characterization of pt-sn/c cathode catalysts via polyol reduction method for use in direct methanol fuel cellMartin, Lynwill Garth January 2013 (has links)
Philosophiae Doctor - PhD / Direct methanol fuel cells (DMFCs) are attractive power sources as they offer high conversion efficiencies with low or no pollution. One of the major advantages DMFCs has over PEMFCs is that methanol is a liquid and can be easily stored where in the case for PEMFCs storing hydrogen requires high pressures and low temperatures. However, several challenging factors especially the sluggish oxygen reduction reaction (ORR) and the high cost of Pt catalysts, prolong their
commercialization. With the aim to search for more active, less expensive more active ORR catalysts and methanol tolerant catalysts than pure Pt, this dissertation focuses on the development of low loading Pt electrocatalyst and the understanding of their physical and electrochemical properties. Pt-Sn/C electrocatalsyts have been synthesized by a modified polyol reduction method. The effect of temperature, pH, water, sonication and addition of carbon form were studied before a standard polyol method was established. From XRD patterns, the Pt-Sn/C peaks shifted slightly to lower 2Ө angles when compared with commercial Pt/C catalyst, suggesting that Sn is alloying with Pt. Based on HRTEM data, the Pt-Sn/C nanoparticles showed small particle sizes well-dispersed onto the carbon support with a narrow particle distribution. The particle sizes of the different as-prepared catalysts were found to be between 2-5 nm. The Pt-Sn/C HA Slurry pH3 catalysts was found to be the best asprepared catalyst and was subjected to heat-treatment in a reducing atmosphere at 250-600 °C which led to agglomeration yielding nanoparticles of between 5-10 nm. The Methanol Oxidation Reaction (MOR) on the as-prepared Pt-Sn/C HA Slurry pH3 catalyst appeared at lower currents (+7.11 mA at 860 mV vs. NHE) compared to the commercial Pt/C (+8.25 mA at +860 mV vs. NHE) suggesting that the Pt-Sn/C catalyst has „methanol tolerance capabilities‟. Pt-Sn/C HA Slurry pH3 and Pt-Sn/C 250 °C catalysts showed better activity towards the ORR than commercial Pt/C with specific and mass activities higher than Pt/C at +0.85 V vs NHE. The Tafel slopes of Pt-Sn/C HA Slurry pH3 catalyst was -62 and -122 mV dec-1 for the low and high current regions respectively and suggests that the ORR mechanism is similar to that of commercial Pt/C indicating that the ORR kinetics was not negatively influenced by the addition of tin. It was found that the electrochemical oxidation reduction reaction follows first order kinetics of a multi-electronic (n=4ē) charge transfer process producing water. All the Pt-Sn/C catalysts showed resistance towards MOR and it was found for the
heat-treated catalysts that an increase in temperature resulted in an increase in methanol tolerance. The synthesized Pt-Sn/C HA Slurry pH3 catalysts were also tested in a fuel cell environment. Electrodes were prepared by either spraying on Toray carbon paper with the Asymtek machine or by VI spraying directly on the membrane with a hand spray gun the catalysts coated membrane (CCM)
technique. Polarization curves obtained in DMFC with CCM showed superior performance than electrode prepared by spraying on the carbon paper with the machine. In our study, the Pt-Sn/C catalyst appears to be a promising methanol tolerant catalyst with activity towards the ORR in the DMFC.
|
7 |
Probing the Active Site of CNx Catalysts for the Oxygen Reduction Reaction in Acidic Media: A First-Principles StudyZhang, Qiang 28 September 2018 (has links)
No description available.
|
8 |
Electrochemically modified carbon materials for applications in electrocatalysis and biosensorsGonzález-Gaitán, Carolina 05 July 2016 (has links)
No description available.
|
9 |
Eletrocatalisadores formados por nitretos, carbetos e óxidos metálicos para o eletrodo de oxigênio / Electrocatalysts composed of metalic nitrides, carbides, and oxides for the oxygen electrodePasqualeti, Aniélli Martini 26 May 2017 (has links)
O desenvolvimento de eletrocatalisadores eletricamente condutores com alta atividade para a reação de redução de oxigênio (ORR - Oxygen Reduction Reaction) e desprendimento de oxigênio (OER - Oxygen Evolution Reaction) é de extrema importância e interesse para dispositivos de eletro-conversão de energia, como as células a combustível e eletrolisadores, que operam tanto em meio alcalino quanto ácido. Em meio alcalino, é possível o uso de metais não nobres e, assim, são viáveis para o uso em larga escala. Em meio ácido, é necessário o uso de materiais estáveis, uma vez que eles são expostos a um ambiente extremamente corrosivo e à altos potenciais, principalmente durante o processo de liga/desliga do dispositivo. Diante disso, este trabalho foi dividido em três linhas de pesquisa: Parte I - estudos de eletrocatalisadores bifuncionais para a ORR e OER em meio alcalino, sendo eles compostos por espinélios de manganês-cobalto em combinação com nanopartículas de ouro (MnCo2O4/Au). Parte II - estudos de eletrocatalisadores alternativos para a ORR em eletrólito ácido, onde foram considerados carbetos e nitretos de molibdênio (Mo2C-MoN) e, oxinitretos de tântalo (Ta-ON). Parte III - estudo de suportes alternativos ao carbono para a ORR em eletrólito ácido, sendo eles compostos por carbonitretos de tântalo e titânio (Ta-CN e Ti-CN). Os resultados da Parte I para MnCo2O4/Au mostraram que houve um aumento significativo na atividade de MnCo2O4 com a adição de ouro para ambas as reações. Foi possível observar que a combinação de nanopartículas condutoras (ouro) com nanopartículas ativas, mas não condutoras (MnCo2O4), é promissora para o desenvolvimento de eletrocatalisadores ativos para uso como eletrodos de oxigênio. Quanto a Parte II, os materiais compostos por Mo2C-MoN foram obtidos por meio da inserção de carbono e nitrogênio com tratamento térmico, na presença de carbono Vulcan e NH3, em alta temperatura. O material nomeado como MoN + Mo2C (molibdato) foi o que apresentou maior atividade catalítica, o que pôde ser atribuído ao menor tamanho de cristalito, maior quantidade da sua fase MoN e ao efeito sinérgico entre MoN e Mo2C, facilitando a ORR em comparação ao nitreto e carbeto de molibdênio puros. Nesta mesma linha de pesquisa, oxinitretos de tântalo foram sintetizados utilizando ureia como fonte de nitrogênio. Foi observado que Ti-Ta-ON apresentou maior atividade catalítica quando comparado aos demais eletrocatalisadores. Já na Parte III, os resultados para carbonitreto de titânio como suporte para a platina (Pt/Ti-CN) mostraram que, além da sua atividade para a ORR ser semelhante à platina suportada em carbono (Pt/C), ele também se mostrou mais estável que Pt/C após a realização de testes de estabilidade. / The development of conductive electrocatalysts with high activity for the oxygen reduction and evolution reactions (ORR and OER) is of extremely importance for devices that electroconvert energy, such as fuel cells and electrolizers, which work in alkaline and acid media. A substantial amount of metals can be employed in alkaline electrolytes once the latter do not require the use of noble metals. The acid medium asks for stable materials, since they are exposed to a high oxidative environment and potentials during the start-up/shutdown events of the device. On the base of these facts, this research work has been divided into three parts: Part I - bifunctional electrocatalysts studies for the ORR and OER in alkaline electrolyte, the materials were composed of spinel manganese-cobalt oxide combined with gold nanoparticles (MnCo2O4/Au). Part II - studies of alternative electrocatalysts for the ORR in acid electrolyte, which included molybdenum carbides and nitrides (Mo2C-MoN), and tantalum oxynitrides (Ta-ON). Part III - alternative supports to the carbon for the ORR in acid electrolyte, which included tantalum and titanium carbonitrides (Ta-CN and Ti-CN). The results for MnCo2O4/Au, in Part I, showed that the addition of gold on the surface of the oxide improved the latter activity for both reactions. The combination of conductive nanoparticles (gold) with active, but non-conductive, nanoparticles (MnCo2O4) seems promising for the development of active electrocatalysts for the ORR and OER. In Part II, the materials composed of Mo2C-MoN were synthesized through carbon and nitrogen insertion, in a high temperature heat treatment, in the presence of Vulcan carbon and NH3. Among the gotten materials, the so called MoN + Mo2C (molybdate) showed the better electrocatalytic activity for the ORR, which could be attributed to its smaller crystallite size and the greater amount of its MoN phase, along with the synergistic effect between MoN and Mo2C. In this way, tantalum oxynitrides materials were obtained via a urea synthesis. The catalyst referred to as Ti-Ta-ON showed the better ORR activity among all the others studied oxynitrides materials. In Part III, besides the activity for the ORR of platinum supported on titanium carbonitride (Pt/Ti-CN) was similar to the activity of platinum supported on carbon (Pt/C), Pt/Ti-CN was also more stable than the latter, after the stability tests.
|
10 |
Eletrocatalisadores formados por nitretos, carbetos e óxidos metálicos para o eletrodo de oxigênio / Electrocatalysts composed of metalic nitrides, carbides, and oxides for the oxygen electrodeAniélli Martini Pasqualeti 26 May 2017 (has links)
O desenvolvimento de eletrocatalisadores eletricamente condutores com alta atividade para a reação de redução de oxigênio (ORR - Oxygen Reduction Reaction) e desprendimento de oxigênio (OER - Oxygen Evolution Reaction) é de extrema importância e interesse para dispositivos de eletro-conversão de energia, como as células a combustível e eletrolisadores, que operam tanto em meio alcalino quanto ácido. Em meio alcalino, é possível o uso de metais não nobres e, assim, são viáveis para o uso em larga escala. Em meio ácido, é necessário o uso de materiais estáveis, uma vez que eles são expostos a um ambiente extremamente corrosivo e à altos potenciais, principalmente durante o processo de liga/desliga do dispositivo. Diante disso, este trabalho foi dividido em três linhas de pesquisa: Parte I - estudos de eletrocatalisadores bifuncionais para a ORR e OER em meio alcalino, sendo eles compostos por espinélios de manganês-cobalto em combinação com nanopartículas de ouro (MnCo2O4/Au). Parte II - estudos de eletrocatalisadores alternativos para a ORR em eletrólito ácido, onde foram considerados carbetos e nitretos de molibdênio (Mo2C-MoN) e, oxinitretos de tântalo (Ta-ON). Parte III - estudo de suportes alternativos ao carbono para a ORR em eletrólito ácido, sendo eles compostos por carbonitretos de tântalo e titânio (Ta-CN e Ti-CN). Os resultados da Parte I para MnCo2O4/Au mostraram que houve um aumento significativo na atividade de MnCo2O4 com a adição de ouro para ambas as reações. Foi possível observar que a combinação de nanopartículas condutoras (ouro) com nanopartículas ativas, mas não condutoras (MnCo2O4), é promissora para o desenvolvimento de eletrocatalisadores ativos para uso como eletrodos de oxigênio. Quanto a Parte II, os materiais compostos por Mo2C-MoN foram obtidos por meio da inserção de carbono e nitrogênio com tratamento térmico, na presença de carbono Vulcan e NH3, em alta temperatura. O material nomeado como MoN + Mo2C (molibdato) foi o que apresentou maior atividade catalítica, o que pôde ser atribuído ao menor tamanho de cristalito, maior quantidade da sua fase MoN e ao efeito sinérgico entre MoN e Mo2C, facilitando a ORR em comparação ao nitreto e carbeto de molibdênio puros. Nesta mesma linha de pesquisa, oxinitretos de tântalo foram sintetizados utilizando ureia como fonte de nitrogênio. Foi observado que Ti-Ta-ON apresentou maior atividade catalítica quando comparado aos demais eletrocatalisadores. Já na Parte III, os resultados para carbonitreto de titânio como suporte para a platina (Pt/Ti-CN) mostraram que, além da sua atividade para a ORR ser semelhante à platina suportada em carbono (Pt/C), ele também se mostrou mais estável que Pt/C após a realização de testes de estabilidade. / The development of conductive electrocatalysts with high activity for the oxygen reduction and evolution reactions (ORR and OER) is of extremely importance for devices that electroconvert energy, such as fuel cells and electrolizers, which work in alkaline and acid media. A substantial amount of metals can be employed in alkaline electrolytes once the latter do not require the use of noble metals. The acid medium asks for stable materials, since they are exposed to a high oxidative environment and potentials during the start-up/shutdown events of the device. On the base of these facts, this research work has been divided into three parts: Part I - bifunctional electrocatalysts studies for the ORR and OER in alkaline electrolyte, the materials were composed of spinel manganese-cobalt oxide combined with gold nanoparticles (MnCo2O4/Au). Part II - studies of alternative electrocatalysts for the ORR in acid electrolyte, which included molybdenum carbides and nitrides (Mo2C-MoN), and tantalum oxynitrides (Ta-ON). Part III - alternative supports to the carbon for the ORR in acid electrolyte, which included tantalum and titanium carbonitrides (Ta-CN and Ti-CN). The results for MnCo2O4/Au, in Part I, showed that the addition of gold on the surface of the oxide improved the latter activity for both reactions. The combination of conductive nanoparticles (gold) with active, but non-conductive, nanoparticles (MnCo2O4) seems promising for the development of active electrocatalysts for the ORR and OER. In Part II, the materials composed of Mo2C-MoN were synthesized through carbon and nitrogen insertion, in a high temperature heat treatment, in the presence of Vulcan carbon and NH3. Among the gotten materials, the so called MoN + Mo2C (molybdate) showed the better electrocatalytic activity for the ORR, which could be attributed to its smaller crystallite size and the greater amount of its MoN phase, along with the synergistic effect between MoN and Mo2C. In this way, tantalum oxynitrides materials were obtained via a urea synthesis. The catalyst referred to as Ti-Ta-ON showed the better ORR activity among all the others studied oxynitrides materials. In Part III, besides the activity for the ORR of platinum supported on titanium carbonitride (Pt/Ti-CN) was similar to the activity of platinum supported on carbon (Pt/C), Pt/Ti-CN was also more stable than the latter, after the stability tests.
|
Page generated in 0.0589 seconds