In part to search for a possible critical point (CP) in the phase diagram of hot nuclear matter, a beam energy scan was performed at the Relativistic Heavy-Ion Collider at Brookhaven National Laboratory. The Solenoidal Tracker at RHIC (STAR) collected Au+Au data sets at beam energies, √sNN , of 7.7, 11.5, 19.6, 27, 39, 62.4, and 200 GeV. Such a scan produces hot nuclear matter at different locations in the phase diagram. Lattice and phenomenological calculations suggest that the presence of a CP might result in divergences of the thermodynamic susceptibilities and correlation lengths. The statistical moments of the identified-particle multiplicity distributions directly depend on both the thermodynamic susceptibilities and correlation lengths, possibly making the shapes of these multiplicity distributions sensitive tools for the search for the critical point. The statistical moments of the multiplicity distributions of a number of different groups of identified particle species were analyzed. Care was taken to remove a number of experimental artifacts that can modify the shapes of the multiplicity distributions. The observables studied include the lowest four statistical moments (mean, variance, skewness, kurtosis) and some products of these moments. These observables were compared to the predictions from several approaches lacking critical behavior, such as the Hadron Resonance Gas model, mixed events, (negative) binomial, and Poisson statistics. In addition, the data were analyzed after gating on the event-by-event antiproton-to-proton ratio, which is expected to more tightly constrain the event trajectories on the phase diagram.

The phase diagram of the Mg-Pd system was redetermined in the range from 50 at. % Mg to 100 at. % Mg. It contains several intermediate phases with some of them being complex metallic alloy phases (CMAs), i.e., characterized by (i) giant unit cells with more than hundred atoms, (ii) inherent disorder, (iii) the presence of a cluster substructure. Phase fields and heterogeneous equilibria of the intermediate phases β- Mg6Pd, γ-Mg57Pd13, δ-Mg56.4Pd13.6, ε-Mg306Pd77, ζ-Mg64Pd17, η-Mg3Pd, θ-Mg5Pd2, ι- Mg2Pd and κ-MgPd were determined. The first five phases are CMAs with Mackay clusters as fundamental structural units. The crystal structure of the most magnesium-rich compound β-Mg6Pd was redetermined. It was found to be more complicated than previously thought due to correlated disorder of only two atom sites in the cubic unit cell. The γ-, ε- and ζ-phases form in a small window of temperature (50 oC) and composition (3 at. %) close to 80 at. % Mg. A new structure type was assigned to Mg3Pd (Cu3P, P63cm). The single phase field of the θ-phase is caused by constitutional vacancies. The new ι-phase crystallizes with NiTi2 structure-type. / Das Phasendiagramm des Systems Mg–Pd wurde im Bereich von 50 bis 100 At.-% Mg neu bestimmt. In diesem Phasendiagramm finden sich mehrere intermediäre Phasen, darunter auch komplexe intermetallische Verbindungen (engl.: complex intermetallic alloys, CMAs). CMAs sind charakterisiert durch (i) große Elementarzellen mit mehr als einhundert Atomen, (ii) intrinsischer Fehlordnung und (iii) dem Vorhandensein einer Cluster- Substruktur. Die Phasenfelder und heterogenen Gleichgewichte der intermediären Phasen β-Mg6Pd, γ- Mg57Pd13, δ-Mg56.4Pd13.6, ε-Mg306Pd77, ζ-Mg64Pd17, η-Mg3Pd, θ-Mg5Pd2, ι-Mg2Pd und κ- MgPd wurden bestimmt. Die ersten fünf der eben genannten Phasen sind CMAs mit Mackay Clustern als fundamentales strukturelles Einheit. Alle übrigen Phasen besitzen einen einfacheren kristallografischen Aufbau. Die Kristallstruktur der Mg-reichsten Verbindung β-Mg6Pd wurde neu bestimmt und ist weitaus sich als komplizierter als bisher angenommen. Die Ausdehnung des Einphasenfeldes von β-Mg6Pd lässt sich jedoch sehr einfach mit korrelierter Fehlordnung von lediglich zwei Atomen in der kubischen Elementarzelle verstehen. Die γ-, ε-, und ζ-Phasen bilden sich in einem schmalen Temperatur- (50 °C) und Zusammensetzungsbereich (3 at. %) nahe 80 at. % Mg. Der Verbindung Mg3Pd (Cu3P, P63cm) wurde ein neuer Strukturtyp zugewiesen. Die Ausdehnung des Einphasenfeldes der θ-Phase lässt sich mit dem Einbau konstitutioneller Leerstellen erklären. Die neue ι-Phase kristallisiert im NiTi2 Strukturtyp.

Im Mittelpunkt dieser Arbeit standen die Darstellung und Charakterisierung ternärer Bismutsubchloride unter Einbau von Übergangsmetallen der 8., 9. und 10. Gruppe. Durch Vorlage eines hohen Chloranteils in der Synthese wurde die "chemische Schere" der Oxidation so stark wirksam, dass in den Verbindungen die gewünschten voneinander isolierten Cluster aus Metallatomen vorlagen. Die Verbindungen Bi12PtCl12, Bi12-xRhCl13-x, Bi12-xIrCl13-x (x < 1) und Bi6,67PtCl12 wurden als Pulver und als Kristalle durch Festkörperreaktionen bei 1273 K in Quarzglasampullen hergestellt. Die schwarz glänzenden, würfelförmigen Kristalle sind luftstabil, in verdünnten Mineralsäuren und in organischen Lösungsmitteln beständig. Die Zusammensetzungen wurden mit EDX-Analysen und Röntgenbeugung am Einkristall bestimmt. Zur weiteren Charakterisierung wurden quantenchemische Rechnungen, ramanspektroskopische Untersuchungen, Messungen der magnetischen Suszeptibilität und der elektrischen Leitfähigkeit durchgeführt. Kristalle der Verbindung Bi12PtCl12 täuschen ein rhomboedrisches Kristallsystem vor, die Struktur konnte in der Raumgruppe P 1 als nahezu perfekter Inversionszwilling eines Achsendrillings gelöst werden. Auf den Eckplätzen der pseudorhomboedrischen Elementarzelle befinden sich [PtBi6Cl12]2- -Cluster und in der Mitte ein (Bi6)2+ -Polykation. Dieses (Bi6)2+ -Polykation in Form eines geöffneten Oktaeders bestätigt experimentell Vorhersagen von Kuznetsov et al. Nach den Regeln von Wade ist das Polykation mit 2 x 6 + 4 = 16 Gerüstelektronen als nido-Cluster zu verstehen. Die Schwerpunkte der Anionen und Kationen fügen sich zu einer dem CsCl-Typ analogen Anordnung zusammen. Mit einer vollständigen Besetzung aller Bismutlagen in der Mitte der Elementarzelle kann Bi12PtCl12 eine Schlüsselrolle zugeordnet werden, die sozusagen den Prototyp für diesen Strukturtyp darstellt. Die weiteren Verbindungen stellen unterbesetzte Varianten dar und können von Bi12PtCl12 abgeleitet werden. Im Verlauf der Untersuchungen zu den ternären Subchloriden in den Systemen wurden wenige Kristalle der binären Verbindung Bi7Cl10 erhalten. Die Tatsache, dass es sich um eine neue binäre Phase im recht stark untersuchten Gebiet Bismut-Chlor handelte führte zu einer neuerlichen, systematischen Überprüfung des Systems Bi/Cl. Mittels thermischer Analysen wurde das Zustandsdiagramm Bi/BiCl3 präzisiert. Bi7Cl10 zersetzt sich bereits bei 190 °C peritektoid in Bi6Cl7 und BiCl3 Bi7Cl10(s) = Bi6Cl7(s) + BiCl3(g). Das Zustandsbarogramm des binären Systems wurde über Gesamtdruckmessungen im Membran-Nullmanometer erstmalig bestimmt. Aus den Druckfunktionen der Bismutchloride sowie aus Messungen der Molwärme von Bi6Cl7 wurden die thermodynamischen Standarddaten abgeleitet. Unter Verwendung dieser Daten wurden thermodynamische Modellierungen der Festkörper-Gasphasen-Gleichgewichte durchgeführt, mit deren Hilfe die Synthese von Bi7Cl10 optimiert werden konnte. Die phasenreine Gasphasenabscheidung von Bi7Cl10 ist aufgrund der Kondensation der dominierenden Gasphasenspezies BiCl und BiCl3 im Existenzbereich der Verbindung oberhalb des Zersetzungspunktes (190 °C) nicht möglich. Im Existenzgebiet von Bi7Cl10 kommt der Transport dann wegen der resultierenden Partialdrücke unmittelbar zum Erliegen. Aus Röntgenbeugungsuntersuchungen an Einkristallen geht hervor, dass Bi7Cl10 bei Raumtemperatur in der tetragonalen Raumgruppe I 41/a c d mit a = 28,235(3) und c = 39,950(4) Å kristallisiert (Z = 64). Analog zu Bi6Cl7 = ((Bi9)5+)[(Bi3Cl14)5-] kann Bi7Cl10 unter Verdopplung der Summenformel als ((Bi9)5+)[(Bi5Cl20)5-] formuliert werden. In der Kristallstruktur sind Polykationen (Bi9)5+, welche die Gestalt zweifach überkappter trigonaler Prismen haben, in ein Chlorobismutat(III)-Raumnetzwerk [(Bi5Cl20)5-] eingebettet. Die Polykationen und das Anionennetzwerk sind deutlich voneinander separiert.

Die Dissertation beschreibt Untersuchungen der intermetallischen Verbindungen TbxY1-xNi2B2C bzw. TbxEr1-xNi2B2C, Tb2PdSi3 sowie Dy2PdSi3, die sich auszeichnen durch physikalische Erscheinungen, die durch die Wechselwirkung der magnetischen Momente der Seltenerd (SE)-Ionen mit den Leitungselektronen hervorgerufen werden. Sie umfasst Beiträge zur Konstitution der Legierungssysteme, methodische Untersuchungen zur Einkristallzüchtung, zur Charakterisierung der Homogenität und Perfektion der Kristalle und zu physikalischen Eigenschaften (Supraleitung, Magnetismus). Die für das Erstarrungs- und Schmelzverhalten der intermetallischen Phasen relevanten quasi-binären Schnitte der Tb-(Y, Er)-Ni-B-C bzw. Tb(Dy)-Pd-Si-Phasendiagramme, die bisher noch nicht bekannt waren, konnten bestimmt werden. Damit wurden die Prozessparameter der Einkristallzüchtung durch tiegelfreies Zonenschmelzen optimiert. Die unterschiedlichen Erstarrungstypen, peritektische Erstarrung (SENi2B2C) bzw. kongruentes Erstarren (SE2PdSi3), wurden durch unterschiedliche Ziehgeschwindigkeiten bei der Einkristallzüchtung berücksichtigt. An den massiven Einkristallen wurden Homogenitätsuntersuchungen hinsichtlich Elementkonzentration und physikalischer Eigenschaften (Tc, Tn, RRR) als Funktion der Längskoordinate durchgeführt, die geringe Eigenschaftsunterschiede der einkristallinen Proben nachweisen. Aus der Zusammensetzungsänderung über die Kristalllänge konnte in Verbindung mit in-situ Messungen der Zonentemperatur ein einfaches Prozessmodell des Zonenschmelzens der untersuchten Verbindungen entwickelt werden. Die Korrelation von magnetischen und supraleitenden Eigenschaften der Borokarbidmischreihen werden primär vom Verhältnis der Seltenen Erden bestimmt aber auch durch die Konzentration der weiteren Elemente. An Einkristallen konnte eine Anisotropie des oberen kritischen Feldes der Supraleitung von TbxY1-xNi2B2C gezeigt werden, die durch die magnetischen Tb-Ionen bestimmt wird. Die Untersuchungen der Tb2PdSi3- und Dy2PdSi3-Einkristalle ergaben eine Anisotropie der magnetoelektrischen Eigenschaften. / In this thesis investigations of the intermetallic compounds TbxY1-xNi2B2C, TbxEr1-xNi2B2C, Tb2PdSi3 and Dy2PdSi3 are presented. These compounds exhibit interesting physical phenomena caused by the interaction of the rare earth (RE) magnetic moments on the conduction electrons. Moreover, contributions on the constitution of the alloy systems, basic investigations of crystal growth process, homogeneity, microstructure and physical properties (superconductivity, magnetism) of the crystals are given. The quasi-binary sections of the Tb-(Y, Er)-Ni-B-C and Tb(Dy)-Pd-Si-phase diagrams which are relevant for the crystallisation of the different intermetallic phases have been determined for the first time. They were utilised for optimisation of the process parameters of single crystal growth by floating-zone melting. Because of the different solidification modes of RENi2B2C (peritectic solidification) and RE2PdSi3 (congruent solidification) different growth velocities have been employed in crystal growth. The composition and the physical properties (Tc, Tn, RRR) have been investigated as function of the crystal axis co-ordinate. As these properties show only a slight shift over the crystal length samples are representative for the whole crystal. From the slight composition shift over the crystal length a process model of the floating zone growth has been developed utilising the in-situ measurements of the zone-temperature. The correlation of magnetic and superconducting properties of the borocarbide solid solution compounds are mainly governed by the RE-fraction but they are also influenced by the concentration of the other elements. For TbxY1-xNi2B2C single crystals an anisotropic upper critical field of superconductivity has been detected which is induced by the magnetic Tb-ions. The investigations of Tb2PdSi3 and Dy2PdSi3 revealed an anisotropy of the magnetoresistive properties.

<p>Due to climatic change, increasing thermal loads inbuildings and rising living standards, comfort cooling inbuildings is becoming increasingly important and the demand forcomfort cooling is expanding very quickly around the world. Theincreased cooling demand results in a peak in electrical powerdemand during the hottest summer hours. This peak presents newchallenges and uncertainties to electricity utilities and theircustomers.</p><p>Cool thermal storage systems have not only the potential tobecome one of the primary solutions to the electrical powerimbalance between production and demand, but also shift coolingenergy use to off-peak periods and avoid peak demand charges.It increases the possibilities of utilizing renewable energysources and waste heat for cooling generation. In addition, acool storage can actually increase the efficiency of combinedheat and power (CHP) generation provided that heat drivencooling is coupled to CHP. Then, the cool storage may avoidpeaks in the heat demand for cooling generation, and this meansthat the CHP can operate at design conditions in most oftime.</p><p>Phase Change Materials (PCMs) used for cool storage hasobtained considerable attention, since they can be designed tomelt and freeze at a selected temperature and have shown apromising ability to reduce the size of storage systemscompared with a sensible heat storage system because they usethe latent heat of the storage medium for thermal energystorage.</p><p>The goal of this thesis is to define suitable PCM candidatesfor comfort cooling storage. The thesis work combines differentmethods to determine the thermophysical properties oftetradecane, hexadecane and their binary mixtures, anddemonstrates the potential of using these materials as PCM forcomfort cooling storage. The phase equilibrium of the binarysystem has been studied theoretically as well asexperimentally, resulting in the derivation of the phasediagram. With knowledge of the liquid-solid phase equilibriumcharacteristics and the phase diagram, an improvedunderstanding is provided for the interrelationships involvedin the phase change of the studied materials. It has beenindicated that except for the minimum-melting point mixture,all mixtures melt and freeze within a temperature range and notat a constant temperature, which is so far often assumed in PCMstorage design. In addition, the enthalpy change during thephase transition (heat of fusion) corresponds to the phasechange temperature range; thus, the storage density obtaineddepends on how large a part of the phase change temperaturerange is valid for a given application.</p><p>Differential Scanning Calorimetery (DSC) is one frequentlyused method in the development of PCMs. In this thesis, it hasbeen found that varying results are obtained depending on theDSC settings throughout the measurements. When the DSC runs ata high heating/cooling rate it will lead to erroneousinformation. Also, the correct phase transition temperaturerange cannot be obtained simply from DSC measurement. Combiningphase equilibrium considerations with DSC measurements gives areliable design method that incorporates both the heat offusion and the phase change temperature range.</p><p>The potential of PCM storage for peak shaving in differentcooling systems has been demonstrated. A Computer model hasbeen developed for rapid phase equilibrium calculation. The useof phase equilibrium data in the design of a cool storagesystem is presented as a general methodology.</p><p><b>Keywords:</b>Comfort cooling, peak shaving, PCM, coolthermal storage system, DSC, phase change temperature range,the heat of fusion, phase equilibrium, phase diagram. Language:English</p>

Spherical agglomerates of benzoic acid crystals have been successfully prepared by drowning-out crystallization in three solvent partial miscible mixtures. Benzoic acid is dissolved in ethanol, bridging liquid is added and this mixture is fed to the agitated crystallizer containing water as the anti-solvent. Small crystals are produced by crystallization of the substance, and the crystals are agglomerated through the action of the bridging liquid. Different solvents: chloroform, toluene, heptane, pentane, cyclohexane, ethyl acetate and diethyl ether are chosen as bridging liquids, all being low soluble in water and showing good wettability for benzoic acid crystals. The influence of process conditions such as concentration of solute, agitation rate, feeding rate, amount of bridging liquid and temperature on the properties of benzoic acid spherical agglomerates, are investigated. Different sets of experiments were accomplished to track how the properties of the particles gradually change during the normal spherical crystallization experiment. Other sets of experiments were performed to examine the influence of agitation and process time for agglomeration. The product properties such as particle size distribution, morphology and mechanical strength have been evaluated. The mechanical strength of single agglomerates has been determined by compression in a materials testing machine, using a 10 N load cell. Compression characteristics for single agglomerates are compared with the data on bed compression. The present study shows that the bridging liquid has significant influence on the product properties, using diethyl ether and ethyl acetate no agglomerates are formed. Using any of the other five solvents (chloroform, toluene, heptane, pentane, and cyclohexane) spherical agglomerates are formed, as long as a sufficient amount of the bridging liquid is used. Using cyclohexane as bridging liquid at 5°C and toluene at 20°C the particles are larger compared to particles formed at other conditions. The highest particle fracture stress is obtained by using toluene as the bridging liquid at 5 and 20°C. Particle morphology depends on the bridging liquid used and the particles are completely spherical when toluene and pentane are used as bridging liquids. Different process parameters are found to have a significant influence on the physico-mechanical properties of the product. The range of operation for spherical agglomeration is relatively narrow and only at certain conditions spherical agglomerates are produced. With increasing amount of bridging liquid the particle size and strength increase and the morphology improves. Particle size decreases and the fracture force increases with increasing feeding rate, but the morphology remains unchanged. For all the solvents, the particle size and the fracture stress increase with decreasing temperature. For four of the solvents the morphology improves with decreasing temperature. For cyclohexane the result is the opposite, in that the particles are spherical at 20°C and irregular at 5°C. Spherical agglomerates of benzoic acid, both as single particles as well as in the form of a bed, have a high compressibility and low elastic recovery, properties that are favorable for direct tabletting. As the feed solution is supplied to the crystallizer the amount of benzoic acid that can crystallize actually does crystallize fairly rapidly. Hydrodynamics are responsible for bringing particles together for the agglomeration. Experiments reveal that during the gradual addition of the feed to the agitated aqueous solution, both particle size and particle number increases. It is clear from the experiments that not only further addition of feed solution leads to larger product particles but also continued agitation. Along the course of the process the properties of the particles change gradually but substantially. By continued agitation, the particle porosity decreases, density, strength gradually increases and also the spherical shape develops gradually. / QC 20110419

Uranium-zirconium (U-Zr) alloys comprise a class of metallic nuclear fuel that is regularly considered for application in fast nuclear energy systems. The U-10wt%Zr alloy has been demonstrated to very high burnup without cladding breach in the Experimental Breeder Reactor-II (EBR-II). This was accomplished by successfully accommodating gaseous fission products with low smear density fuel and an enlarged cladding plenum. Fission gas swelling behavior of the fuel has been experimentally revealed to be significantly affected by the temperature gradient within a fuel pin and the multiple phase morphologies that exist across the fuel pin. However, the phase effects on swelling behavior have not been yet fully accounted for in existing fuel performance models which tend to assume the fuel exists as a homogeneous single phase medium across the entire fuel pin. Phase effects on gas bubble nucleation and growth in the alloy were investigated using transmission electron microscopy (TEM). To achieve this end, a comprehensive examination of the alloy system was carried out. This included the fabrication of uranium alloys containing 0.1, 2, 5, 10, 20, 30, 40, and 50 wt% zirconium by melt-casting. These alloys were characterized using electron probe micro-analysis (EPMA), differential scanning calorimetry (DSC), and thermogravimetric analysis (TGA). Once the alloys were satisfactorily characterized, selected U-Zr alloys were irradiated with 140 keV He^(+) ions at fluences ranging from 1 × 10^(14) to 5 × 10^(16) ions/cm^(2). Metallographic and micro-chemical analysis of the alloys indicated that annealing at 600 °C equilibrates the alloys within 168 h to have stable α-U and δ-UZr_(2) phase morphologies. This was in contrast to some reported data that showed kinetically sluggish δ-UZr_(2) phase formation. Phase transformation temperatures and enthalpies were measured using DSC-TGA for each of the alloys. Measured temperatures from different time annealed alloys have shown consistent matches with most of the features in the current U-Zr phase diagram which further augmented the EPMA observed microstructural equilibrium. Nevertheless, quantitative transformation enthalpy analysis also suggests potential errors in the existing U-Zr binary phase diagram. More specifically, the (β-U, γ2) phase region does not appear to be present in Zr-rich (> 15 wt%) U-Zr alloys and so further investigation may be required. To prepare TEM specimens, characterized U-Zr alloys were mechanically thinned to a thickness of ~150 μm, and then electropolished using a 5% perchloric acid/95% methanol electrolyte. Uranium-rich phase was preferentially thinned in two phase alloys, giving saw-tooth shaped perforated boundaries; the alloy images were very clear and alloy characterization was accomplished. During in-situ heating U-10Zr and U-20Zr alloys up to 810 °C, selected area diffraction (SAD) patterns were observed as the structure evolved up to ~690 °C and the expected α-U → β-U phase transformation at 662 °C was never observed. For the temperature range of the (α-U, γ2) phase region, phase transformation driven diffusion was observed as uranium moved into Zr-rich phase matrix in U-20Zr alloy; this was noted as nonuniform bridging of adjacent phase lamellae in the alloy. From the irradiation tests, nano-scale voids were discovered to be evenly distributed over several micrometers in U-40Zr alloys. For the alloys irradiated at the fluences of 1 × 10^(16) and 5 × 10^(16) ions/cm^(2), estimated void densities were proportional to the irradiation doses, (250 ± 40) and (1460 ± 30) /μm^(2), while void sizes were fairly constant, (6.0 ± 1.5) and (5.2 ± 1.2) nm, respectively. Measured data could be foundational inputs to the further development of a semi-empirical metal fuel performance model.

No description available.

Demands for new, energy-efficient appliances have greatly increased in response to our growing need for a more environmentally friendly society. Magnetic refrigeration is a technique that utilizes the magnetocaloric effect, with possible energy savings of up to 30% compared to commercial gas compression refrigerators. A material appropriate for commercial magnetocaloric devices should be both cheap and non-toxic; it should also exhibit a first-order magnetic transitions close to room temperature. The magnetic properties of Fe2P-related materials can be relevant in this context, since their magnetic properties can be finely tuned through the substitution of Fe by Mn and P by Si, As, Ge or B to meet the general requirements for a magnetocaloric device. An in-depth study has therefore here been made of the structural and magnetic properties of the (Fe,Mn)2(P,Si)-system. The phase diagram of the FeMnP1-xSix-system has been carefully re-examined. It is found to contain two single-phase regions: an orthorhombic Co2P-type structure (x &lt; 0.15) and a hexagonal Fe2P-type structure (0.24 ≤ x &lt; 0.50). Selected compounds within the Fe2P-type region of the phase diagram have been shown to exhibit potential for use in magnetic refrigeration applications. Neutron powder diffraction has here been used to determine the magnetic structures of selected crystalline compositions within the FeMnP1-xSix-system to gain a better understanding of its magnetic properties. The Fe2P-type region is mainly ferromagnetic, but an incommensurate antiferromagnetic structure has also been identified close to the Co2P/Fe2P-type phase border for x ≈ 0.25. The so-called ''virgin effect'' in the Fe2P-type region of the FeMn(P,Si) phase diagram is found to be accompanied by an irreversible structural phase transition induced by magnetostriction. This new phase is found to be preserved during successive cooling-heating cycles. Furthermore, the magnetic properties of the substituted Fe2P-type structure changes significantly for metal:non-metal ratios away from 2:1. Such deviations could well explain the apparently conflicting structure-property relationships described in earlier literature for the FeMnP1-xSix-system.

Results from petrographic analyses, chemical analyses and mineral phase diagram calculations show that staurolite minerals grew in selvages adjacent to quartz veins. Previous studies show the same relationships between quartz veins and garnet, as well as kyanite growth. The selvages are formed as metamorphic fluids flow through cracks, altering the bulk composition by mass transfer and triggers the nucleation and growth of new minerals. A pseudosection for a staurolite absent sample has been calculated using THERMOCALC. No stability field correlates to visually observed mineralogy. This indicates that a reaction forming staurolite never was triggered since no fluids was present during metamorphism.