1 |
A low temperature differential stirling engine for power generation : a thesis submitted in partial fulfilment of the requirements for the degree of Master of Engineering in the University of Canterbury /Lloyd, Caleb C. January 2009 (has links)
Thesis (M.E.)--University of Canterbury, 2009. / Typescript (photocopy). Includes bibliographical references (leaves 106-109). Also available via the World Wide Web.
|
2 |
Tvorba logistické koncepce ve vybrané firmě / Creation of Logistic Concept in the Selected CompanyKapusta, Vladimír January 2017 (has links)
Master thesis named „Creation of logistic concept in the selected company“ is focused on detailed analysis of material flow of waste in manufacturing company. The main objective of thesis is proposal of new logistic concept of handling with copper waste, which is created during the manufacturing processes, which function will be to remove defects in material flow, to shorten the handling time with copper waste and more accurate information flow, considering work safety, costs and time.
|
3 |
The Afterlife of ClothesWahlberg, Hanna January 2020 (has links)
The clothes and textiles sold in Sweden is mostly manufactured in countries outside of the EU. The production requires large areas of land and vast amount of water. The environmental impact is big during the production phase in terms of water usage, chemicals and transports. In general, the consumption of new textile is increasing in Sweden, but so is also reused textil. In 2016 the consumption of textile in Sweden was nearly 14 kg per person and year, which equals the weight of 14 t-shirts, 5 pairs of jeans, 7 hoodies and 2 coats. At the same time 5 kg textile per person and year is thrown in the the household waste and nearly 60 % of the thrown textile is in good condition and could be used again. The amount of clothes given to charity organisations is almost 4 kg per person and year but 70 % of the collected textile is exported. The collection and recycling of non-reusable textiles in Sweden today is low. Current recycling techniques are mainly energy recovery through incineration. The reasons for this has to do with limitations in the sorting and collection of consumer textile waste or limitation of optional recycling processes. In fact, there is no large scale industrial process to recycle textile into new textile, which leads to an open loop system where input of new materials is required. But there are upcoming technologies that meets the challenges today. This project explores the dynamics of current ways of treating textile waste. Through learnings from existing system, in combination with new technologies, alternative ways of structuring processes of production, consumption, usages and disposal is proposed with the aim of establishing a new relationship to contemporary urban production.
|
4 |
Cleaner Production Opportunity Assessment For Market Milk Production In Ataturk Orman Ciftligi (aoc) FacilityOzbay, Arzu 01 December 2003 (has links) (PDF)
In this study, possible cleaner production opportunities for a dairy processing facility
are examined, considering the market milk production process. Cleaner production
concept and its key tools of implementation were analyzed to build the basis of
study. General production process and its resulting environmental loads are discussed
by taking possible CP opportunities as the axis of study. A methodology is developed
for cleaner production opportunity assessment in Milk Processing Facility of Atatü / rk
Orman Ciftligi. The methodology covers two major steps / preparation of checklists
for assisting auditing and opportunity assessment / implementation of the mass
balance analysis. For mass balance analysis, measurements and experimental
analysis of the mass flows are utilized to determine the inputs and outputs. Prepared check lists are utilized to determine waste reduction options that could be
implemented. Selected opportunities are evaluated considering its environmental
benefits and economic feasibility.
|
5 |
Possibilities and Limitations of using Production Waste PET and PES materials in Additive Manufacturing (3D Printing Technology)Gopathi, Pranay, Surve, Pratik January 2017 (has links)
No description available.
|
6 |
From Food to Fuel: The Swedish Resource Efficiency Dilemma.Lundgren, Monia January 2014 (has links)
The EU has embarked on a resource efficiency trajectory in order to solve resource scarcity and general sustainability issues. The conversion of food waste into fuel is considered resource efficient as it makes use of resources that would otherwise be discarded. On the other hand, the food sector affects the environment substantially as it is inherently resource intensive and excessive. The purpose of the study was to assess how resource efficient the food waste substrate (feedstock for energy production) is from a life-cycle perspective. The study also aimed to determine if associated Swedish incentives and current market signals promote resource efficiency in Sweden. The food waste substrate has a complex life-cycle and current analyses neglect crucial life-cycle impacts. This makes resource efficiency difficult to determine in absolute terms. The first resource efficiency principle, that promotes the use of fewer inputs, becomes questionable as the food waste substrate has twice as many input stages in comparison to the food crop substrate. The second principle, stating that the food waste substrate should contribute to a low-carbon economy, also falls short due to a calculation method that neglects crucial emission stages. Due to the absent life-cycle perspective, crucial environmental impacts associated with food production are neglected. This affects the achievement of the Swedish Generation Goal and environmental quality objectives. The study concludes that the food waste substrate should undergo a thorough life-cycle analysis. Furthermore, it should be compared to other biofuel options in order to determine degree of resource efficiency. Only then can an appropriate set of EU and national policy measures be instated to safeguard scarce resources and promote a sustainable agriculture and energy sector.
|
7 |
Model upotrebe otpadne staklene ambalaže kao sekundarne sirovine u proizvodnji blokova od gline / Model of waste glass containers using as secondary raw material in clay blocks productionMirosavljević Zorica 15 March 2019 (has links)
<p>Istraživanje u okviru doktorske disertacije obuhvata analizu mogućnosti<br />primene reciklaže otpadnog ambalažnog stakla radi dobijanja novog<br />proizvoda. Sa ciljem iznalaženja potencijalnog rešenja za postojeći problem<br />u oblasti upravljanja otpadnom staklenom ambalažom u Srbiji i načina za<br />poboljšanje održivosti u oblasti industrijske proizvodnje, testirana je<br />upotreba drobljenog otpadnog stakla u formi praha, kao sekundarne sirovine<br />u proizvodnji blokova od gline u ciglani. U skladu sa dobijenim<br />eksperimentalnim rezultatima i zaključkom da je 30% optimalna masena<br />količina staklenog praha koja može da se meša sa glinom kod praktične<br />proizvodnje blokova dobrog kvaliteta, razvijen je model, baziran na podacima<br />koji se odnose na konkretan primer. Rezultati modela u okviru analize<br />uticaja procesa proizvodnje blokova sa staklenim reciklatom na životnu<br />sredinu, kao i rezultati analize uticaja na cenu proizvodnje blokova<br />upotrebom staklenog reciklata, predstavljaju značajan doprinos kompletnom<br />sprovedenom istraživanju i usmeravaju na dalji tok istraživanja u oblasti<br />upotrebe otpada kao resursa u industrijskoj proizvodnji.</p> / <p>The research within doctoral dissertation includes a possibility analysis of applying<br />waste glass containers recycling in the production of new product. In order to find a<br />potential solution for the existing problem in the waste glass container management<br />in Serbia and to find a way to improve sustainability in the field of industrial<br />production, the use of waste glass cullet in powder form as a secondary raw material<br />in the clay block production was tested. In accordance with the obtained<br />experimental results and the conclusion that 30 wt. % is the optimal glass cullet<br />amount which can be mixed with clay in the practical production of good quality<br />blocks, a model, based on data related to the concrete example, has been developed.<br />The results of environmental impact assessment of clay/glass blocks production and<br />its costs, represent a significant contribution for complete research and focus on a<br />further research course in the field of waste utilization as a resource in industrial<br />production.</p>
|
8 |
Avaliação ambiental dos resíduos sólidos oriundos da produção de couros no Rio Grande do SulMetz, Lisiane Emilia Grams 26 September 2016 (has links)
Submitted by Silvana Teresinha Dornelles Studzinski (sstudzinski) on 2017-02-08T12:23:45Z
No. of bitstreams: 1
Lisiane Emilia Grams Metz_.pdf: 3506520 bytes, checksum: 266b7740d5048d4c8dd4468eeaa7853a (MD5) / Made available in DSpace on 2017-02-08T12:23:45Z (GMT). No. of bitstreams: 1
Lisiane Emilia Grams Metz_.pdf: 3506520 bytes, checksum: 266b7740d5048d4c8dd4468eeaa7853a (MD5)
Previous issue date: 2016-09-26 / Tecnosinos / SENAI / O Rio Grande do Sul concentra cerca de um terço das unidades produtivas de couro do Brasil, e portanto exerce uma papel importantíssimo neste setor. A produção de couro acabado ocorre a partir das peles obtidas nos frigoríficos e se dá pelo uso de grande volume de água e de uma ampla gama de produtos químicos associados a diversas operações mecânicas e gera, além do produto desejado, diversos tipos de resíduos, causando impactos ambientais significativos. Os resíduos sólidos gerados destacam-se pelo volume e potencial poluidor. Os empreendimentos gaúchos são obrigados a emitir e submeter regularmente, ao órgão ambiental licenciador, relatórios dos resíduos sólidos gerados e destinados, no entanto, não há a disponibilidade da informação das tipologias e da quantidade de resíduos sólidos gerados no estado do Rio Grande do Sul, sendo que o último inventário publicado data de 2002. O conhecimento a cerca da geração e destinação dos resíduos é de suma importância para subsidiar a tomada de decisões sobre o assunto, seja com relação à formação de políticas públicas, seja para a priorização de investimentos ou para definição de áreas para empreender esforços técnicos e científicos. A avaliação ambiental do gerenciamento dos resíduos sólidos oriundos da produção de couros no Rio Grande do Sul consiste de uma pesquisa descritiva exploratória, de natureza qualitativa e quantitativa, formando um estudo de caso do gerenciamento de resíduos do setor coureiro do estado. Este trabalho inclui uma breve apresentação do processo de produção de couros, os aspectos e impactos ambientais oriundos deste, os resíduos sólidos gerados e as tecnologias de tratamento e destinação final dos mesmos, com ênfase nas formas de valorização mediante a reutilização e processos de reciclagem, upcycling e downcycling, com a geração de possíveis subprodutos e coprodutos. Aborda ainda, as premissas do gerenciamento de resíduos, os requisitos legais e as oportunidades de Produção Mais Limpa aplicáveis ao gerenciamento de resídos sólidos. A partir do Sistema de Gerenciamento e Controle de Resíduos Sólidos Industriais – SIGECORS de 2013 e 2014 (FEPAM, 2016A) foi verfificado a geração anual de 112.642,5 toleladas de resíduos, mais 129.107,3 metros cúbicos de resíduos e mais 88.877 unidades (embalagens e lâmpadas), sendo que a geração de resíduos perigosos foi ligeiramente inferior a de não perigosos. Os principais resíduos sólidos gerados, em termos quantitativos, são os oriundos dos sistemas de controle de poluição (principalmente lodos de estações de tratamento de efluentes), seguidos dos resíduos de couro (basicamente curtidos ao cromo) e dos resíduos oriundos das peles (de processos antes do curtimento). No que se refere a resíduos não perigosos – Classe II, foi verificado que a prática dos processos de reciclagem, upcycling e downcycling, resultando em coprodutos e subprodutos, atingiu um desempenho superior a 95%. Quanto aos resíduos perigosos - Classe I, o nível de aproveitamento foi menor (no entanto bem superior ao padrão registrado em 2002) sendo que o lodo gerado nas estações de tratamento de efluentes é o resíduo mais problemático do setor, não havendo ainda uma alternativa de aproveitamento disponível. Por meio da avaliação ambiental realizada conclui-se que o diferencial ambiental do setor no RS está na aplicação sistêmica de processos de valorização de resíduos, incluindo a reutilização de resíduos, a prática de upcycling, transformando resíduos em coprodutos, a reciclagem, e a prática de downcyclig, transformando resíduos em subprodutos. / Rio Grande do Sul state concentrates around one third of productive leather units in Brasil, which has a significant role in this sector. Finished leather production starts with the skins obtained from slaughterhouse and consumes a large amount of water and a great number of chemical products, combined with different mechanical operations. It results not just in the desired product, but also in different kinds of waste, causing significant environmental impacts. Among the produced wastes, solid ones stand out, mainly due to its large amount and their pollutant potential. Even though enterprises from Rio Grande do Sul are forced to regularly issue and submit a report on produced and allocated solid waste to the environmental commission agency, there is not available information about typologies and solid waste produced in the state of Rio Grande do Sul, and the last inventory dated 2002. Knowledge about waste production and its disposal is very importance in order to support decision making on the present subject, either to create public policy and decide where to invest, or to define in which areas technical and scientific efforts must be performed. Management environmental evaluation of solid waste from leather production in Rio Grande do Sul consists in a qualitative and quantitative exploratory research, creating a case study about the leather sector management in the state. This dissertation includes a brief presentation on leather production process, its aspects and environmental impacts, the solid waste generated, treatment technologies and its final disposal, with emphasis on forms of recovery through recycling processes, upcycling and down cycling, considering the generation of possible byproducts and coproducts for the leather industry. It also addresses waste management assumptions, legal requirements and applicable opportunities from Cleaner Production to solid waste management. From “Sistema de Gerenciamento e Controle de Resíduos Sólidos Industriais” – SIGECORS of 2013 and 2014 (FEPAM, 2016A) it was observed an annual generation of 112,642.5 tons plus 129,107.3 cubic meters of waste. In addition, it was found a generation of 88,877 units (packaging and light bulbs), and the dangerous waste production was slightly lower than the non dangerous ones. The main solid wastes generated, in quantitative terms, come from pollution control systems (especially sludge from effluent treatment stations), followed by leather wastes (basically tanned via chromium) and by wastes from skins (in processes performed before tanning). About non dangerous wastes – Class II, it was found that recycling practices, upcycling and down cycling, which results in coproducts and byproduct, achieved a performance higher than 95%. About the dangerous wastes – Class I, the reclamation was lower (however much higher than the registered standard in 2002) and the produced sludge from effluent treatment stations is the most problematic waste in the sector. There is not yet an available alternative to recycling. By the environmental evaluation performed, it is concluded that environmental differential in this sector in Rio Grande do Sul is in the systemic application of waste appreciation processes, which includes reuse of waste, upcycling execution, transforming waste in coproducts, recycling, and down cycling execution, transforming waste in byproducts.
|
9 |
Mapeamento do processo em laboratórios de análises clínicas para identificação de perdas produtivasSouza, Mariane Cásseres de 27 November 2015 (has links)
Submitted by Silvana Teresinha Dornelles Studzinski (sstudzinski) on 2016-02-18T15:30:42Z
No. of bitstreams: 1
Mariane Cásseres de Souza_.pdf: 561518 bytes, checksum: 753667250a1a766a27d44c3207904913 (MD5) / Made available in DSpace on 2016-02-18T15:30:42Z (GMT). No. of bitstreams: 1
Mariane Cásseres de Souza_.pdf: 561518 bytes, checksum: 753667250a1a766a27d44c3207904913 (MD5)
Previous issue date: 2015-11-27 / CAPES - Coordenação de Aperfeiçoamento de Pessoal de Nível Superior / A saúde é uma das atividades econômicas mais importantes no Brasil e no mundo. As instituições de saúde no Brasil caminham para alcançar uma eficiência técnica e gerencial, através da identificação, controle e gerenciamento da qualidade. As preocupações com a qualidade dos serviços prestados na área da saúde acabaram refletindo em novas exigências, com portarias e resoluções que auxiliam na execução das atividades na área de análises clínicas. Esta pesquisa teve como objetivo geral identificar as atividades associadas aos principais pontos de perdas produtivas em laboratórios de análises clínicas. Classifica-se como pesquisa exploratória e qualitativa, tendo sido adotado o estudo de casos múltiplos, realizados em quatro laboratórios de análises clínicas, localizados no Litoral Norte do Estado do Rio Grande do Sul – Brasil. Como resultado, a pesquisa apresenta que 77,16% dos processos laboratoriais caracterizam-se por atividades que não agregam valor ao cliente, sendo, 28,46% perdas por movimentação e 48,70% perdas por espera. Apenas 22,84% das atividades foram caracterizadas como agregadoras de valor para o cliente. No que tange à Sistemas de Gestão, as normas certificadoras NBR ISO 9001, 17025 e 15189 podem auxiliar na melhoria do processo com a implantação de requisitos técnicos e gerenciais para o gerenciamento. Nesse sentido, a pesquisa pretendeu expandir conhecimentos relacionados aos Sistemas de Gestão em laboratórios clínicos, aliados a normas certificadoras do setor. / Health is one of the most important economic activities in Brazil and worldwide. The health institutions in Brazil work to achieve a technical and managerial efficiency through identification, control and quality management. Some concerns about the quality of services dedicated to the health care reflect to the new requirements, where is included ordinances and resolutions that can give assistance during the execution of activities in the field of clinical analysis. This research aimed to analyze the main points of losses and as the implementation of management systems associated with the certification standards of the sector, can assist in improving clinical laboratories processes. It is classified as exploratory and qualitative research, having been adopted the multiple case-study, conducted at four clinical laboratories, located on the northern coast of Rio Grande do Sul State - Brazil. As a result, it shows that 77.16% of the laboratory process is characterized by activities that do not add value to the customer, being 28.46% movement losses and 48.70% losses due the waiting. Only 22.84% of activities were considered to aggregating value to the customer. Regarding the Management Systems, the certification standards ISO 9001, 17025 and 15189 can help reduce the losses with the implementation of technical and managerial requirements for management. In this sense, the research intended to expand knowledge related to the Quality Management Systems in clinical laboratories, coupled with certification standards in that field.
|
10 |
Проект завода по производству бетонных и растворных смесей с использованием вторичных заполнителей производительностью 50 000 м3 в год : магистерская диссертация / The project of a plant for the production of concrete and mortar mixes using secondary aggregates with a capacity of 50,000 m3 per yearГо, Ч., Go, C. January 2024 (has links)
The master's thesis is devoted to the design of a plant for the production of concrete and mortar mixtures. It is proposed to use aggregates obtained from concrete waste as coarse and fine aggregates. Based on the research work carried out, the principal possibility of obtaining heavy concretes of strength classes B15-B20 is shown, which can be used in low-rise construction, as well as for the construction of non-critical structures. A technological scheme for the preparation of secondary aggregates from concrete waste, a scheme for the production of mixtures based on them has been developed. A factory of a given capacity has been designed, the main and auxiliary equipment has been calculated and selected. The graphic part has been completed. / Магистерская диссертация посвящена проектированию завода по производству бетонных и растворных смесей. В качестве крупного и мелкого заполнителей предлагается использовать заполнители, полученные из бетонного лома. На основании проведенной исследовательской работы показана принципиальная возможность получения тяжелых бетонов классов по прочности В15-В20, можно применять в малоэтажном строительстве, а также для возведения не ответственных конструкций. Разработана технологическая схема подготовки вторичных заполнителей из бетонного лома, схема производства смесей на их основе. Запроектирован завод заданной производительности, рассчитано и подобрано основное и вспомогательное оборудование. Выполнена графическая часть.
|
Page generated in 0.0766 seconds