Orientadores: Richard Landers, Abner de Siervo / Dissertação (mestrado) - Universidade Estadual de Campinas, Instituto de Fisica Gleb Wataghin. / Made available in DSpace on 2018-08-12T18:57:37Z (GMT). No. of bitstreams: 1 Carazzolle_MarceloFalsarella_M.pdf: 9436583 bytes, checksum: 076451d27442a919e962e5f6cf59ba6a (MD5) Previous issue date: 2005 / Resumo: Neste trabalho foi estudado o crescimento de filmes ultra-finos de Sb sobre Ni(111) e In sobre Ni(111), no regime de frações de monocamadas, com o interesse no entendimento da estrutura cristalográfica e eletrônica destas ligas de superfície. Os filmes foram preparadas em ambiente de UHV e caracterizados do ponto de vista da estrutura eletrônica através da técnica experimental de espectroscopia de elétrons (XPS) e cálculos de teoria do funcional da densidade (DFT). Na determinação da estrutura cristalográfica das ligas de superfície foram utilizados LEED-qualitativo e PED (difração de fotoelétrons) e DFT. Os filmes de Sb sobre Ni(111) formaram uma liga substitucional de superfície ordenada na estrutura (Ö 3 x Ö 3) R30 °, seguindo o empacotamento fcc do substrato. Os filmes de In sobre Ni(111) formaram duas fases ordenadas, 2 x 2 e (Ö 3 x Ö 3) R30 ° e , coexistindo na superfície em forma de domínios, ambas as fases formaram ligas substitucionais seguindo o empacotamento fcc do substrato. A estrutura eletrônica do filmes foram estudadas por XPS e interpretadas com a ajuda das simulações de DFT. Em ambos os filmes não houve tranferência de cargas entre os átomos, mas tivemos evidências de uma redistribuição de cargas intra-atômica nos átomos do substrato. / Abstract: In this thesis we present a studied the growth of the ultra-thin films of Sb on Ni(111) and In on Ni(111), in the sub-monolayer regime. The main interest was on the understanding of the crystallography and electronic structure theses surface alloys. The films were grown under UHV conditions and characterized as to their electronic structure by X-ray Photoelectron Spectroscopy (XPS) and simulated theoretically by density functional theory (DFT). To determine the crystallography structure, LEED and photoelectron diffraction (PED) was used. The Sb on Ni(111) films after annealing stabilized as a substitution surface alloy in the ( Ö 3 x Ö 3 ) R 30 ° structure following the fcc substrate. The In on Ni(111) films formed two ordered phases 2x2 and (Ö 3 x Ö 3) R30 ° coexisting on the surface, both the phases formed substitution alloys following the fcc substrate. The electronic structure of both the films didn¿t show evidence of charge transfer between the atoms, but of a possible charge redistribution between the states of the Ni atoms in contact with the evaporated film. / Mestrado / Superfícies e Interfaces ; Peliculas e Filamentos / Mestre em Física

A new measurement of the neutron electric dipole moment (nEDM) is being developed at TRIUMF, where a high density source of ultra cold neutrons (UCN) is currently under construction. A fast, high-efficiency UCN detector is needed for the experiment, and a 6-Li doped glass scintillation detector is being explored for this purpose. In this work, simulations and test measurements were carried out to optimize the light guide design for the new UCN detector. Acrylic and air-core light guides, the latter with two different reflecting surfaces, were considered. Three prototype light guides were constructed and tested, and results were compared with simulations. The best solution was found to be an acrylic guide, wrapped with mylar foil. For a guide 12 cm in length as required by the experimental layout, a lower limit of approximately 25 photoelectrons per neutron capture was established for the proposed geometry and photomultiplier configuration. / May 2016

Zukünftige Beschleunigerprojekte und Nutzerexperimente erfordern für ihren Betrieb einen hochbrillanten Elektronenstrahl mit hohem mittlerem Strom. Eine Elektronenquelle mit dem Potential die Anforderungen erfüllen, ist ein supraleitender Hochfrequenz (SHF) Photoinjektor im Dauerstrichbetrieb. Die Strahldynamik eines solchen Photoinjektor Systems bestimmt die maximal zu erreichende Strahlbrillanz und wird ihrerseits von den Design und Betriebsparametern des Photoinjektors beeinflusst. Ziel ist immer die entscheidenden Design- und Betriebsparameter der Elektronenquelle hinsichtlich einer maximalen Strahlbrillanz zu wählen. Diese Aufgabe verlangt ein detailliertes Verständnis der Strahldynamik-Prozesse. Ferner ist es notwendig, eine Optimierung des Photoinjektors als Ganzes, mit dem Ziel einer maximalen Strahlqualität bei hohem mittlerem Strom, vorzunehmen. Dieses ermöglicht auch, die physikalischen Grenzen eines gegebenen Designs zu ermitteln und im Betrieb vollständig auszunutzen. Diese Doktorarbeit befasst sich mit der Strahldynamik in einem SHF Photoinjektor, unter Berücksichtigung interner Raumladungseffekte. Die Erkenntnisse zur Strahldynamik werden für die Entwicklung eines Optimierungsprogramms verwendet, um die Leistung des Injektors hinsichtlich der Strahlbrillanz zu verbessern. Die entwickelte Methode basiert auf Pareto-Optimierung mehrerer Zielfunktionen, unter Verwendung eines generischen Algorithmus. Das zentrale Ergebnis dieser Arbeit umfasst ein universelles Optimierungsprogramm, das für Photoinjektoren unabhängig von ihrem Design und Anwendungsgebiet genutzt werden kann. Für den Betrieb mit hoher Strahlbrillanz ist es möglich aus den erhaltenen Pareto-optimalen Lösungen einen stabilen Satz an Einstellwerten für den Photoinjektor zu extrahieren. Durch die allgemeine Optimierungsstrategie lässt sich das entwickelte Programm auch für andere Beschleunigerabschnitte, oder die Optimierung einer ganzen Anlage mit erweiterter Zielsetzung anpassen. / An increasing number of future accelerator projects, light sources and user experiments require high brightness, high average current electron beams for operation. Superconducting radio-frequency (SRF) photoinjectors running in continuous-wave (cw) mode hold the potential to serve as an electron source that generates electron beams of high brightness. Different operation and design parameters of the SRF photoinjector impact the beam dynamics and, thus, the beam brightness. Therefore, an in-depth understanding of the beam dynamics processes in an SRF photoinjector and the dependency of the beam dynamics on the photoinjector set parameters is crucial. A high brightness beam operation requires a global optimization of the SRF photoinjector that allows to find suitable photoinjector settings and to figure out and extend the physical performance limits of the investigated injector design. The dissertation at hand offers a detailed analysis of the beam dynamics in an SRF photoinjector regarding internal space charge effects. Furthermore, the impact of the photoinjector elements on the electron beam is discussed. The lessons learned from this theoretical view are implemented in the development of an optimization tool to achieve a high brightness performance. A universal multi-objective optimization program based on a generic algorithm was developed to extract stable, optimum gun parameter from Pareto-optimum solutions. This universal tool is able to optimize and find the physical performance limit of any (S)RF photoinjector independent from the individual application of the electron source (energy recovery linac, free electron laser, ultra-fast electron diffraction). This thesis thereby verifies and complements existing theoretical considerations regarding photoinjector-beam interactions. The global optimization strategy can be introduced to variable optimization objectives as well as it can be extended to an optimization of further parts of the accelerator facility.