Thema der vorliegenden Arbeit ist die Untersuchung ausgewählter niederdimensionaler Schichtgittersysteme, wobei das Hauptinteresse in der Erforschung der elektronischen Struktur im Zusammenhang mit Interkalationsexperimenten liegt. Einkristalline Graphit-, TiSe2- und TaSe2-Proben wurden vor und nach der Interkalation mit winkelaufgelöster Photoemission, Fermi- und Isoenergieflächenmessungen und Elektronenbeugung (LEED) analysiert. Als Interkalationsmaterialien wurden U, Eu, Gd und Cs verwendet. Die experimentellen Daten wurden mit Ergebnissen von LDA-LCAO-Bandstrukturrechnungen und Simulationen im Rahmen eines Single-Impurity-Anderson-Modells verglichen. Neben dem Einfluß unterschiedlicher Valenzelektronen der interkalierten Atome auf den Einlagerungsprozeß werden Fragen zum Lokalisierungsverhalten von 4f- und 5f-Zuständen und zu den Veränderungen in der Dimensionalität der Verbindungen durch die Einlagerung diskutiert. Ein weiterer Schwerpunkt dieser Arbeit befaßt sich mit Untersuchungen zur temperaturabhängigen Ausbildung von Ladungsdichtewellen in 1T-TaSe2. / Subject of the present thesis are investigations of selected low-dimensional layered lattice systems, with the principal goal to study the electronic structure in relation to intercalation experiments. Single-crystalline graphite-, TiSe2 - and TaSe2- samples were analyzed by angle-resolved photoemission, Fermi- and isoenergy-surface measurements, and low energy electron diffraction experiments before and after intercalation. U, Eu, Gd, and Cs were used as materials for the intercalation process. The experimental results were compared with theoretical LDA-LCAO band-structure calculations and with simulations in the framework of a single-impurity Anderson model. In addition to the influence of different numbers of valence electrons from intercalated atoms, questions concerning the localization of 4f and 5f states and changes in the dimensionality of the compounds due to the intercalation process are discussed. Investigations of the temperature dependent formation of charge density waves in 1T-TaSe2 complete this work.

<p>Oligo(phenyleneethynylene) (OPE) molecules are a class of fully conjugated aromatic molecules, that attract attention for their application as “molecular wires” in molecular electronic devices. In this thesis work, self-assembled monolayers (SAMs) formed from a variety of OPE derivatives have been studied. The chemical properties, structure, and packing density of the SAMs have been characterized utilizing techniques such as high-resolution X-ray photoemission spectroscopy (HRXPS), near-edge X-ray absorption fine structure spectroscopy (NEXAFS), Infrared reflection absorption spectroscopy (IRRAS), contact angle measurements, and atomic force microscopy (AFM).</p><p>In a first study, three OPE-derivatives, with benzene, naphthalene and anthracene, respectively, inserted into the backbone, and an acetyl-protected thiophenol binding group were found to form SAMs on Au(111) substrates with lower molecular surface densities and larger molecular inclination as the lateral π-system increases.</p><p>In a second study, porphyrin was introduced as the end group to a wire-like molecule such as OPE. The purpose was to obtain well-organized and functionalized surfaces with optical and redox properties. Three porphyrin-functionalized OPEs had different binding groups, an acetyl-protected thiophenol, a benzylic thiol, and a trimethylsilylethynylene group, and were found to form SAMs on gold surfaces with difference in structure and degree of order. The molecules with the acetyl-protected thiophenol binding group were found to form a high quality SAM compared to the other two. This SAM exhibits a well-ordered and densely packed layer.</p><p>This study gives rise to a better understanding of SAM formation of OPE derivatives, and will form a base for further investigations of charge transport properties of these molecular films, which is of interest for applications in molecular electronic devices.</p>

Transparent conducting oxides (TCOs) combine optical transparency in the visible region with a high electrical conductivity. In2O3 doped with Sn (widely, but somewhat misleadingly, known as indium tin oxide or ITO) is at present the most important TCO, with applications in liquid crystal displays, touch screen displays, organic photovoltaics and other optoelectronic devices. Surprisingly, many of its fundamental properties have been the subject of controversy or have until recently remained unknown, including even the nature and magnitude of the bandgap. The technological importance of the material and the renewed interest in its basic physics prompted the research described in this thesis. This thesis aims (i) to establish conditions for the growth of high-quality In2O3 nanostructures and thin films by oxygen plasma assisted molecular beam epitaxy and (ii) to conduct comprehensive investigations on both the surface physics of this material and its structural and electronic properties. It was demonstrated that highly ordered In2O3 nanoislands, nanorods and thin films can be grown epitaxially on (100), (110) and (111) oriented Y-stabilized ZrO2 substrates respectively. The mismatch with this substrate is -1.7%, with the epilayer under tensile strain. On the basis of ab initio density functional theory calculations, it was concluded that the striking influence of substrate orientation on the distinctive growth modes was linked to the fact that the surface energy for the (111) surface is much lower than for either polar (100) or non-polar (110) surfaces. The growth of In2O3(111) thin films was further explored on Y-ZrO2(111) substrates by optimizing the growth temperature and film thickness. Very thin In2O3 epilayers (35 nm) grew pseudomorphically under high tensile strain, caused by the 1.7% lattice mismatch with the substrate. The strain was gradually relaxed with increasing film thickness. High-quality films with a low carrier concentration (5.0  1017 cm-3) and high mobility (73 cm2V-1s-1) were obtained in the thickest films (420 nm) after strain relaxation. The bandgap of the thinnest In2O3 films was around 0.1 eV smaller than that of the bulk material, due to reduction of bonding-antibonding interactions associated with lattice expansion. The high-quality surfaces of the (111) films allowed us to investigate various aspects of the surface structural and electronic properties. The atomic structure of In2O3 (111) surface was determined using a combination of scanning tunnelling microscopy, analysis of intensity/voltage curves in low energy electron diffraction and first-principles ab initio calculations. The (111) termination has an essentially bulk terminated (1 × 1) surface structure, with minor relaxations normal to the surface. Good agreement was found between the experimental surface structure and that derived from ab initio density functional theory calculations. This work emphasises the benefits of a multi-technique approach to determination of surface structure. The electronic properties of In2O3(111) surfaces were probed by synchrotron-based photoemission spectroscopy using photons with energies ranging from the ultraviolet (6 eV) to the hard X-ray regime (6000 eV) to excite the spectra. It has been shown that In2O3 is a highly covalent material, with significant hybridization between O and In orbitals in both the valence and the conduction bands. A pronounced electron accumulation layer presents itself at the surfaces of undoped In2O3 films with very low carrier concentrations, which results from the fact the charge neutrality level of In2O3 lies well above the conduction band minimum. The pronounced electron accumulation associated with a downward band bending in the near surface region creates a confining potential well, which causes the electrons in the conduction band become quantized into two subband states, as observed by angle resolved photoemission spectra (ARPES) Fermi surface mapping. The accumulation of high density of electrons near to the surface region was found to shrink the surface band gap through many body interactions. Finally epitaxial growth of In2O3 thin films on α-Al2O3(0001) substrates was investigated. Both the stable body centred cubic phase and the metastable hexagonal corundum In2O3 phase can be stabilized as epitaxial thin films, despite large mismatches with the substrate. The growth mode involves matching small but different integral multiples of lattice planes of the In2O3 and the substrate in a domain matching epitaxial growth mode.

Dans cette thèse, nous avons exploré les possibilités de réaliser des structures hybrides à base graphène (GBHS) par la fonctionnalisation bilatérale du graphène. Le premier chapitre donne une introduction générale sur le graphène et sur la littérature concernant les différentes méthodes d’intercalations de métaux dans le graphène. Le chapitre 2 décrit les techniques expérimentales utilisées. Le chapitre 3 concerne la fonctionnalisation du graphène épitaxié sur SiC (0001) par intercalation d'atome d’or. Les différents modes d'intercalation de l’or ont été mis en évidence par microscopie tunnelle (formation d'agrégats d'atomes d'or individuels et formation d'une couche d'or continue). La nature de ces atomes d'or intercalées a été examinée par des calculs d’image de densité de charge, et par Spectroscopie de Photoélectrons X (XPS). La modification de la structure de bande du graphène a aussi été mise en évidence par Spectroscopie de Photoélectrons UV Résolue Angulairement (ARPES) par des expériences sur synchrotron. Ces études ont révélé une forte extension de la singularité de Van Hove et une augmentation de la vitesse de Fermi. Afin d’agir sur cette extension de la singularité de Van Hove, des molécules fortement donneuses d'électrons, telle que la molécule de TetraThioFulvalene (TTF) ont été déposée sur graphène intercalé or et sur graphite (chapitre 4). La dépendance du transfert de charge de ces molécules avec leur conformation et la réactivité photochromique de ces molécules conjuguées sur le graphène ont également été abordés. Pour comprendre les propriétés structurales de ces molécules, des mesures photophysiques ont été effectuées qui apparaissant dans le chapitre 5. / In this thesis, we have explored the possibilities to realize a Graphene Based Hybrid structures (GBHs) by the functionalization of a graphene layer on both sides. The first chapter gives a general introduction about graphene and a literature review of different metal intercalations on graphene. The second chapter explains the experimental techniques used in this work. In chapter 3, we studied the functionalization of epitaxial graphene on SiC(0001) by gold intercalation. With the help of Scanning Tunneling Microscopy, we have evidenced and characterized different intercalation modes such as the formation of aggregates of individual gold atoms and the formation of a continuous gold layer between the top graphene and the buffer layer. The free standing nature of the intercalated gold atoms was examined by differential charge density plot, projected density of states calculations and further by X-ray photoelectron spectroscopy. The band structure modification of graphene due to these intercalated gold atoms was evidenced by Angle-resolved photoemission spectroscopy, which reveals a strong Van Hove extension and an increase of the Fermi velocity. Extend to this research, to obtain an extended Van Hove singularity usually observed in highly doped graphene; we studied highly electron donor molecules, TetraThioFullvalene (TTF) on pristine and gold intercalated graphene and on graphite (chapter 4). The dependence of charge transfer of these molecules with their conformation and the reactivity of photochromic with conjugated molecules on graphene were also discussed. To understand the structural properties of these molecules photophysical measurements were performed in chapter 5.

Les mémoires flash non volatiles - utilisées dans les ordinateurs, les téléphones portables ou les clés USB - peuvent être constituées de nanostructures semiconductrices (SC) ou métalliques insérées dans une matrice isolante. Elles nécessitent l’élaboration d’hétérostructures de type "oxyde/métal/oxyde/SC" et la maîtrise de chaque interface. Dans ce cadre, nous avons étudié les premiers stades de la croissance de nanostructures de Fer élaborées par épitaxie par jet moléculaire (EJM) sur les substrats d’oxyde (high-k) cristallins LaAlO3(001) et LaAlO3(111). Les propriétés chimiques et structurales ont été déterminées, in-situ, par spectroscopie de photoélectrons X (XPS), diffraction de photoélectrons X (XPD) et diffraction d’électrons (RHEED et LEED) puis ex-situ par microscopie électronique en transmission (TEM). Une étude par simulation des profils XPD, basée sur la théorie de la diffusion multiple, a été menée à l’aide du programme de calcul Ms-Spec. L’étude de la croissance de Fe sur LaAlO3(001) à différentes températures de substrat a montré l’existence d’une fenêtre étroite de température, autour de 500 °C, où la croissance de Fe est épitaxique et de type Volmer-Weber (îlots 3D). Les analyses RHEED, XPD et TEM ont mis en évidence une unique relation d’épitaxie, où la maille élémentaire de Fe est tournée de 45° par rapport à celle du substrat. Les résultats XPS ont montré un environnement chimique unique des atomes de Fer (forme atomique), traduisant l’absence de toute inter-diffusion à l’interface Fe/LaAlO3(001). L’étude de la croissance de Fe sur LaAlO3(111) a également mis en évidence un mode de croissance Volmer-Weber et une interface abrupte. Par ailleurs, tout un travail de développement à l'intérieur du code Ms-Spec a été nécessaire afin de surmonter des problèmes de convergence des calculs de diffusion multiple rencontrés dans le cas d’atomes lourds ayant des énergies cinétiques élevées (atomes de La dans LaAlO3). À cette fin, quatre hypothèses ont été formulés:1- Une prise en compte insuffisante des processus inélastiques :2- L’approximation muffin-tin n'est plus suffisante pour décrire correctement le potentiel ;3- Trop de chemins de faible intensité sont négligés ;4- Divergence de la série de diffusion multiple utilisée pour calculer la section efficace.Les calculs ont montré que les trois premières hypothèses n’ont pas d’influence sur la convergence dans le cas présent. En revanche, la quatrième hypothèse a été validée. En effet, on a montré que du fait du fort pouvoir diffuseur des atomes de La, le développement en série de diffusion multiple pouvait diverger (rayon spectral, i.e. la plus grande des valeurs propres en module de la matrice de diffusion, > 1) pour des grandes tailles d'amas de LaAlO3, alors qu’il converge pour des amas de Si et de MgO de taille similaire (les deux systèmes utilisés en comparaison). Par ailleurs, au-delà de quelques centaines d’atomes, le rayon spectral de LaAlO3, même inférieur à 1, reste important ce qui rend la convergence très lente. / Non-volatile flash memories embedding nanocrystals (NC) are promissing devices for use in computers, mobiles phones or USB keys. The insertion of semiconducting (SC) or metal NC in an insulating matrix requires the elaboration of complex "oxide/metal/oxide/SC" heterostructures and the control of the associated successive growth steps. In this context, we have studied the first growth stades of Fe nanostructures elaborated by Molecular Beam Epitaxy (MBE) on the of crystalline oxides (high-k) substrates of LaAlO3(001) and LaAlO3(111). Chemical and structural properties were investigated in-situ, by X-ray photoelectron spectroscopy (XPS), X-ray photoelectron diffraction (XPD) and electron diffraction (RHEED and LEED), and ex-situ by transmission electron spectroscopy (TEM). A simulation study of XPD profiles, based on the theory of multiple scattering, was conducted using the Ms-Spec calculation program. The study of the growth of Fe on LaAlO3(001) at different substrate temperatures showed the existence of a narrow temperature window, around 500 °C, where Fe has epitaxial growth with Volmer-Weber type (3D islands). The RHEED, XPD and TEM analysis showed a single epitaxial relationship, where the Fe unit cell is rotated by 45° compared to the substrate one. The XPS results showed a unique chemical environment of Fe atoms (atomic form), reflecting the absence of inter-diffusion in the Fe/LaAlO3(001) interface. The study of the Fe grown on LaAlO3(111) also showed a Volmer-Weber growth mode and an abrupt interface.Moreover, further development work within the Ms-Spec code was needed to overcome the issue of multiple scattering calculations convergence usually encountered in the case of heavy atoms with high kinetic energies (La atoms in the LaAlO3). In this regard, four hypotheses were formulated : 1- Insufficient consideration of the inelastic processes ;2- The muffin-tin approximation is no longer sufficient to adequately describe the potential ;3- Unduly low intensity paths are neglected ;4- Divergence of multile scattering series used to calculate the cross section.The calculations allowed us to rule out the first three hypothesis, since no influence on convergence was found in this case. However, the fourth hypothesis was validated. Indeed, it was shown that due to the high power diffuser of the La atoms, the multiple scattering series expansion could diverge (spectral radius, i.e. the largest eigenvalue modulus of the scattering matrix,> 1) for large sizes of LaAlO3 clusters. Whereas, it converges to the clusters of Si and MgO of similar size (both systems used in comparison). Furthermore, even less than 1, spectral radius of LaAlO3 remains important beyond few hundred atoms, thus rendering the convergence very slow.

De nouvelles applications émergent avec le développement de l’électronique souple comme des panneaux tactiles pliables, ou des capteurs de mouvement humain portables (wearable). Les technologies bien maîtrisées des jauges silicium sont mal adaptées à ces usages (faible élongation maximale, hautes températures de fabrication). Dans ce contexte, il est nécessaire de développer de nouveaux types de jauges. De nombreuses alternatives sont étudiées, qu’on peut diviser en deux catégories principales : les transducteurs nanoscopiques et les transducteurs composites. Dans ce travail, on étudie la possibilité d’utiliser une jonction tunnel MIM (Métal Isolant Métal) comme jauge de contrainte. Ce genre de dispositif est très peu étudié dans la littérature et la structure utilisée est généralement de type MIS (Métal Isolant Semi-conducteur). À chaque fois, la sensibilité du dispositif est expliquée par les propriétés du semi-conducteur (silicium). Les objectifs de cette thèse sont donc la compréhension des propriétés piézorésistives des jonctions MIM, l’optimisation de leur sensibilité et la fabrication d’un démonstrateur exploitant les technologies de la plastronique. Des jonctions de différentes natures (électrodes de différents métaux) sont fabriquées par évaporation et par ALD (Atomic Layer Deposition). La variation du courant en fonction de la contrainte est mesurée grâce à un banc de flexion. Le facteur de jauge associé est indépendant de la nature des électrodes mais varie fortement (de 40 à 75) en fonction du sens de polarisation de la jonction. Le facteur de jauge associé à la variation sous contrainte des paramètres géométriques (épaisseur et surface) est calculé mais reste inférieur à 13. Les phénomènes géométriques ne peuvent donc pas expliquer la sensibilité observée. L’étude de l’équation du courant Fowler Nordheim (identifié comme courant dominant dans nos jonctions) montre que cette sensibilité doit être associée à la variation sous contrainte de la hauteur de barrière aux interfaces métal/isolant, et/ou de la masse effective des électrons dans l’alumine. Des mesures de photoémission sont réalisées pour mesurer la hauteur de barrière des jonctions. À terme, cette méthode pourrait permettre de mesurer la variation sous contrainte, et donc de comprendre pleinement l’origine de la sensibilité des jonctions MIM. Pour finir, un démonstrateur intégrant des jauges MIM à effet tunnel (capteur de pression) est réalisé avec un substrat souple en polyimide rigidifié par une structure imprimée en 3D. Ce dispositif démontre la compatibilité des méthodes de fabrication des MIM avec les technologies souples et plastiques. / New applications are emerging with de development of flexible electronic like flexible touch panels and wearable movement sensors. The well mastered silicon technologies are ill adapted to these uses (low maximal elongation, high fabrication temperatures). In this context, it is necessary to develop new types of strain gauges. Numerous possibilities have been studied that can be divided in two main categories: nanosomic transducers and composite transducers. In this work, we study the possibility to use a MIM (Metal Insulator Metal) tunnel junction as strain gauge. This kind of structure is very unusual in the literature were the only similar article are based on MIS (Metal Insulator Semiconductor) junctions. The objectives of this thesis are thus the understanding of the piezorisistive properties of MIM structures, the optimisation of their sensitivity, and the realisation of a sensor prototype exploiting plastonic technologies.

Oligo(phenyleneethynylene) (OPE) molecules are a class of fully conjugated aromatic molecules, that attract attention for their application as “molecular wires” in molecular electronic devices. In this thesis work, self-assembled monolayers (SAMs) formed from a variety of OPE derivatives have been studied. The chemical properties, structure, and packing density of the SAMs have been characterized utilizing techniques such as high-resolution X-ray photoemission spectroscopy (HRXPS), near-edge X-ray absorption fine structure spectroscopy (NEXAFS), Infrared reflection absorption spectroscopy (IRRAS), contact angle measurements, and atomic force microscopy (AFM). In a first study, three OPE-derivatives, with benzene, naphthalene and anthracene, respectively, inserted into the backbone, and an acetyl-protected thiophenol binding group were found to form SAMs on Au(111) substrates with lower molecular surface densities and larger molecular inclination as the lateral π-system increases. In a second study, porphyrin was introduced as the end group to a wire-like molecule such as OPE. The purpose was to obtain well-organized and functionalized surfaces with optical and redox properties. Three porphyrin-functionalized OPEs had different binding groups, an acetyl-protected thiophenol, a benzylic thiol, and a trimethylsilylethynylene group, and were found to form SAMs on gold surfaces with difference in structure and degree of order. The molecules with the acetyl-protected thiophenol binding group were found to form a high quality SAM compared to the other two. This SAM exhibits a well-ordered and densely packed layer. This study gives rise to a better understanding of SAM formation of OPE derivatives, and will form a base for further investigations of charge transport properties of these molecular films, which is of interest for applications in molecular electronic devices.

A core level spectroscopy study of ice and water is presented in this thesis. Combining a number of experiments and spectrum calculations based on density functional theory, changes in the local valence electronic structure are shown to be sensitive to the local H-bonding configurations. Exploiting this sensitivity, we are able to approach important scientific problems for a number of aggregation states; liquid water, the water-metal interface, bulk and surface of hexagonal ice. For the H-bonded model system hexagonal ice, we have probed the occupied valence electronic structure by x-ray emission and x-ray photoelectron spectroscopy. Stepwise inclusion of different types of interactions within density functional theory, together with a local valence electron population analysis, show that it is essential to include intermolecular charge transfer together with internal s-p rehybridizations in order to describe the changes in electronic structure seen in the experiment. The attractive electrostatic interaction between water molecules is enhanced by a decrease in Pauli repulsion. A simple electrostatic model due to charge induction from the surrounding water is unable to explain the electronic structure changes. By varying the probing depth in x-ray absorption the structure of the bulk, subsurface and surface regions is probed in a thin ice film. A pronounced continuum for fully coordinated species in the bulk is in sharp contrast to the spectrum associated with a broken symmetry at the surface. In particular molecular arrangements of water with one uncoordinated OH group have unoccupied electronic states below the conduction band that are responsible for a strong anisotropic pre-edge intensity in the x-ray absorption spectrum. The topmost layer is dominated by an almost isotropic distribution of these species, which is inconsistent with an unrelaxed surface structure. For liquid water the x-ray absorption spectrum resembles that of the ice surface, indicating a domination of species with broken hydrogen bond configurations. The sensitivity to the local hydrogen bond configuration, in particular the sensitivity to broken bonds on the donor side, allows for a detailed analysis of the liquid water spectrum. Most molecules in liquid water are found in two-hydrogen-bonded configurations with one strong donor and one strong acceptor hydrogen bond. The results, consistent with diffraction data, imply that most molecules are arranged in strongly H-bonded chains or rings embedded in a disordered cluster network. Molecular dynamics simulations are unable to describe the experimental data. The water overlayer on the close-packed platinum surface is studied using a combination of core-level spectroscopy and density functional theory. A new structure for water adsorption on close-packed transition metal surfaces is found, where a weakly corrugated non-dissociated overlayer interacts via alternating oxygen-metal and hydrogen-metal bonds. The latter results from a balance between metal-hydrogen bond formation and OH bond weakening. The ultrashort core-hole lifetime of oxygen provides a powerful probe of excited state dynamics via studies of the non-radiative or radiative decay following x-ray absorption. Electrons excited into the pre-edge state for single donor species at the ice surface remain localized long enough for early time solvation dynamics to occur and these species are suggested as strong pre-existing traps to the hydrated electron. Fully coordinated molecules in the bulk contribute to a strong conduction band with electron transfer times below 0.5 femtoseconds. Upon core-ionization, both protons are found to migrate substantial distances on a femtosecond timescale. This unusually fast proton dynamics for non-resonant excitation is captured both by theory and experiment with a measurable isotope effect.

In this study, the oxygen-deficient TiO2, SrTiO3 systems and transition metal ion (Cr or V) doped TiO2, SrTiO3 and SrZrO3 systems have been investigated. We prepared samples as polycrystals, single crystals and thin films for various desires. Their structural, physical and electronic properties were measured by bulk-sensitive techniques (X-Ray Diffraction, SQUID and Electro Paramagnetic Resonance) or surface-sensitive techniques (Photoemission spectroscopy and X-ray absorption spectroscopy). The measurement of SQUID and EPR showed not only their magnetic properties but also the valence state of Cr dopant. We verified the valence state of Cr ions in oxides and found the key parameters of sample synthesis which control the valence state of Cr ions. Segregated phases such as SrCrO4 were formed when the samples were synthesized under O2 rich environment. The surface properties of Cr doped SrZrO3 films are also discussed. We found the synthesis conditions which influence on not only the behavior of Cr ions but also the resistive-switching behaviors. Various resistive-switching behaviors seem to depend on the surface chemistry of films. We found that the accumulation of Cr3+ on film surface provides a clean interface without any non-stoichiometric oxides and that this sharp interface termination results in a good performance of resistive-switching.

In this work, homojunction interfacial workfunction internal photoemission (HIWIP) detectors based on GaAs, and heterojunction interfacial workfunction internal photoemission (HEIWIP) detectors based mainly on the Gallium Arsenide/Aluminum Gallium Arsenide material system are presented. Design principles of HIWIP and HEIWIP detectors, such as free carrier absorption, photocarrier generation, photoemission, and responsivity, are discussed in detail. Results of p-type HIWIPs based on GaAs material are presented. Homojunction detectors based on p-type GaAs were found to limit their operating wavelength range. This is mainly due to band depletion arising through carrier transitions from the heavy/light hole bands to the split off band. Designing n-type GaAs HIWIP detectors is difficult as it is strenuous to control their workfunction. Heterojunction detectors based on Gallium Arsenide/Aluminum Gallium Arsenide material system will allow tuning their threshold wavelength by adjusting the alloy composition of the Aluminum Gallium Arsenide/Gallium Arsenide barrier, while keeping a fixed doping density in the emitter. The detectors covered in this work operate from 1 to 128 micron (300 to 2.3 THz). Enhancement of detector response using resonance cavity architecture is demonstrated. Threshold wavelength extension of HEIWIPs by varying the Al composition of the barrier was investigated. The threshold limit of approximately 3.3 THz (92 micron), due to a practical Al fraction limit of approximately 0.005, can be overcome by replacing GaAs emitters in Gallium Arsenide/Aluminum Gallium Arsenide HEIWIPs with Aluminum Gallium Arsenide/Gallium Arsenide emitters. As the initial step, terahertz absorption for 1 micron-thick Be-doped Aluminum Gallium Arsenide epilayers (with different Al fraction and doping density) grown on GaAs substrates was measured. The absorption probability of the epilayers was derived from these absorption measurements. Based on the terahertz absorption results, an Aluminum Gallium Arsenide/Gallium Arsenide HEIWIP detector was designed and the extension of threshold frequency (f0) to 2.3 THz was successfully demonstrated. In a different study, switching in Gallium Arsenide/Aluminum Gallium Arsenide heterostructures from a tunneling dominated low conductance branch to a thermal emission dominated high conductance branch was investigated. This bistability leads to neuron-like voltage pulses observed in some heterostructure devices. The bias field that initiates the switching was determined from an iterative method that uses feedback information, such as carrier drift velocity and electron temperature, from hot carrier transport. The bias voltage needed to switch the device was found to decrease with the increasing device temperature.