Neste trabalho, o método de Monte Carlo e a resolução da Equação Mestra foram utilizados para simular o processo de difusão espectral da excitação em um sistema polimérico emissor de luz. A metodologia utilizada incorpora a relaxação energética intramolecular, a migração de energia incoerente entre segmentos conjugados e o processo final radiativo (luminescência). O principal objetivo é comparar os resultados da simulação e de experimentos envolvendo medidas de absorção, de excitação óptica e de luminescência realizadas no IFSC ao longo dos últimos anos ou provenientes da literatura especializada. Além disso, a simulação pretende elucidar a natureza dos processos fotofísicos em semicondutores orgânicos e testar a validade de teorias analíticas existentes, o que é essencial para a aplicação dessa classe de materiais como dispositivos no futuro. Especial atenção é dada na análise do comportamento temporal da difusão espectral em sistemas homogêneos em que o acoplamento dipolar na transferência de energia é realizado entre uma matriz de segmentos conjugados distribuídas aleatoriamente. A temperatura foi incorporada ao modelo. A comparação dos resultados da simulação com os resultados experimentais permitiu comprovar a validade do modelo proposto, do programa utilizado e entender melhor características de parâmetros não conhecidos em polímeros conjugados, como a influência da forma da distribuição energética dos estados eletrônicos e a distribuição e da temperatura no processo de migração do éxciton. Foi possível reproduzir com sucesso os espectros de luminescência e de absorção em polímeros conjugados descritos na literatura. Além disso, a simulação permitiu explicar resultados relacionados a sistemas poliméricos homogêneos anisotrópicos como polímeros estirados por uma tensão mecânica e materiais não homogêneos híbridos contendo polímero conjugado emissor de luz e nanopartículas. A maior contribuição foi o entendimento do efeito da temperatura nas propriedades de emissão como deslocamento espectral e alargamento homogêneo. Efeitos anômalos, como o deslocamento da emissão com a temperatura e o alcance da difusão com o tempo, foram explicados em termos da termalização do estado excitado e frustração da migração. Por fim, foi possível estudar os processos fotofísicos envolvidos em heteroestruturas orgânicas contendo gradiente energético que permitem o controle da migração direcional do éxciton e suas propriedades de emissão a partir dos processos de transferência de energia tipo Förster (dipolo-dipolo). O controle sobre os processos fotofísicos do polímero luminescente foi realizado através da alteração tanto da orientação como do tamanho de conjugação do material de polimérico. / In the present work, the Monte Carlo method and the direct numerical integration of the Master Equation were employed to simulate the excitation spectral diffusion process in light emitting polymeric systems. The methodology employed a competition among the internal intra-molecular relaxation, the inter-molecular incoherent energy transfer via Förster mechanism and the final process that may be a radiative emission or a non radiative relaxation through a suppression center. This works main objective is to compare the simulation results with the experiments of absorption, optical excitation and luminescence carried out in our group, throughout the last years or from the specialized literature. Moreover, the simulation intends to elucidate the nature of the photophysical processes in organic semiconductors and to test the validity of existing theories, what is essential for the application of this class of materials to devices in the future. Special attention is given to the analysis of the time dependence and the effect of temperature in homogenous systems, where the energy transfer and spectral diffusion were carried out through a matrix of randomly distributed conjugated segments coupled by dipole interaction. The comparison of the simulation results with the experimental ones allowed to prove the validity of the model, the computational program and to better understand characteristic of parameters for conjugated polymers which are still studied. Different energy distributions of electronic states, molecular position and orientation are used in order to simulate molecular configurations obtained by various sample preparation methodologies. With the simulation, it was possible to reproduce with success the experimental luminescence and absorption spectra in polymers conjugated described in literature. Besides, the simulation allowed to explain the exciton migration and properties related to temperature, such as the red shift and broadening of the spectral lines of conjugated polymer emission. The non exponential characteristics of the emissions time resolved intensity curves have been reproduced. The simulation was used to understand effects of temperature on the spectral diffusion as well. Anomalies related to spectral shift emission spectra with temperature and the mean diffusion length with time were explained with the thermalization and frustration of the migration at sufficiently low temperatures and at long relaxation times. Finally, it was possible to study the photophysical processes present in organic heterostructures having energy gradient, as well as the control of the properties of emission via changing the Förster type energy transfer processes between emitting polymers. The control over the photophysical process of the luminescent polymer was accomplished by changing both orientation and mean conjugation length of the polymer material.

Ces travaux portent sur la conception et l’étude des propriétés photophysiques de polymères de coordination et organométalliques. Dans un premier temps, nous nous sommes intéressés aux adduits formés à partir d’halogénure de cuivre(I) (CuxXyLz ; X= I, Br, Cl). Cette famille de composés possède une grande richesse structurelle de part les conditions de synthèse (choix du ligand, stoechiométrie, choix du solvant, température…) et des propriétés de luminescence variées. Nous nous sommes concentrés sur la synthèse, la caractérisation physique et photophysique d’adduits de CuX à ligands de types monothioéther (RSR) et dithioéther (RS(CH2)nSR). Nous avons ensuite étendu notre étude aux adduits CuX coordinés à des ligands P-chirogéniques (i.e chiralité portée par l’atome de phosphore) puis à des adduits CuX coordinés à la fois par des ligands phosphorés (PPh3 ou dppm) et par des ligands mono- ou dithioéthers. Dans un second temps, nous avons voulu connaître l’impact de l’incorporation de ligands P-chirogéniques (P(C17H35)(Ph)(i-Pr)) sur les propriétés photophysiques de polymères organométalliques conjugués 1D à base de platine(II) et de ligands arylbiséthynyles (-C≡C(Ar)C≡C-). Ce type de polymère basé sur le platine(II) est souvent utilisé comme modèle dans la compréhension des transferts d’énergie dans les états excités. Ces polymères, une fois caractérisés, ont été comparés aux analogues achiraux contenant le fragment trans-Pt(P(PBu)3)2 et plusieurs différences ont été notées. Les observations et conclusions sur la relation structure-propriété sont utiles pour la conception future de matériaux photoniques portant des groupements chiraux. / This work focuses on the design and study of photophysical properties of coordination and organometallics polymers. Initially, we focused on adducts formed from copper(I) halides (CuxXyLz; X = I, Br, Cl). Indeed, these compounds have great structural diversity depending on the synthesis conditions (nature of ligand, stoichiometry, choice of solvent, temperature...) and various luminescence properties. We focused on the synthesis, physical and photophysical characterization of copper(I) halide adducts based on monothioether (RSR) and dithioether (RS(CH2)nSR) ligands. Then, we extended our study to the adducts of copper(I) halide coordinated by phosphorus P-chirogenics ligands (ie chirality carried by the phosphorus atom) and then to CuX adducts coordinated by both phosphorus ligands (PPh3 or dppm)) and mono- or dithioether ligands. Secondly, the impact of the incorporation of P-chirogenics ligands (P(C17H35)(Ph)(i-Pr)) on the photophysical properties of organometallic conjugated polymers 1D based on platinum(II) and arylbisethynyles ligands (-C≡C(Ar)C≡C-) was investigated. This type of polymer based on platinum(II) is often used as a model for the understanding of excited states energy transfers. These polymers, once characterized, were compared to the achiral analogues containing the fragment of trans-Pt(P(PBu)3)2 and several differences were noted. The findings and conclusions on the structure-property relationship are useful in the future design of photonic materials bearing chiral groups.

Kyoto University (京都大学) / 0048 / 新制・課程博士 / 博士(工学) / 甲第17595号 / 工博第3754号 / 新制||工||1572(附属図書館) / 30361 / 京都大学大学院工学研究科高分子化学専攻 / (主査)教授 伊藤 紳三郎, 教授 赤木 和夫, 教授 金谷 利治 / 学位規則第4条第1項該当

>Magister Scientiae - MSc / Currently, non-renewable sources are mostly used to meet the ever-growing demand for energy. However, these sources are not sustainable. In addition to these energy sources being not sustainable, they are bad for the environment although the energy supply sectors highly depend on them. To address such issues the use of renewable energy sources has been proven to be beneficial for the supply of energy for the global population and its energy needs. Advantageous over non-renewable sources, renewable energy plays a crucial role in minimizing the use of fossil fuel and reduces greenhouse gases. Minimizing use of fossil fuels and greenhouse gases is important, because it helps in the fight against climate change. The use of renewable energy sources can also lead to less air pollution and improved air quality. Although solar energy is the most abundant source of renewable energy that can be converted into electrical energy using various techniques, there are some limitations. Among these techniques are photovoltaic cells which are challenged by low efficiencies and high costs of material fabrication. Hence, current research and innovations are sought towards the reduction of costs and increasing the efficiency of the renewable energy conversion devices.

No description available.

No description available.

No description available.

No description available.

The goal of this research was to develop a series of mixed-metal supramolecular complexes with specialized light absorbing units to probe perturbation of excited-state properties by ligand deuteration and long-term complex stability via racemization of initially enantiopure light absorbing subunits. Varying bidentate polypyridyl terminal ligands (TL), bridging ligands (BL), reactive metal center (RM), or number of Ru(II) light absorbers (LA) tunes the electrochemical, spectroscopic, photophysical, and photochemical properties within the supramolecular architecture. Ru(II) monometallics of the design [(bpy)2Ru(prolinate)](PF6) utilize prolinate as a chiral directing ligand to impart chirality to the Ru(II) LAs in the synthesis of more sophisticated supramolecular complexes. Ru(II) monometallics of the design [(TL)2Ru(BL)](PF6)2 (TL = bpy or d8-bpy; BL = dpp or d10-dpp; bpy = 2,2′-bipyridine; dpp = 2,3-bis(2-pyridyl)pyrazine) covalently couple two TLs and one BL to a central Ru(II) metal center forming a LA subunit. Larger bi- and trimetallic complexes are formed by coupling an additional Ru(II), Rh(III), or Pt(II) metal center to an existing Ru(II) LA through a BL. Ru(II),Ru(II), Ru(II),Rh(III), and Ru(II),Pt(II) bimetallics of the design [(TL)2Ru(BL)Ru(TL)2](PF6)4, [(TL)2Ru(BL)RhCl2(TL′)](PF6)3, and [(TL)2Ru(BL)PtCl2](PF6)2 (TL/TL′ = bpy or d8-bpy; BL = dpp or d10-dpp) couple only one Ru(II) LA to a Ru(II), Rh(III), or Pt(II) metal center through the BL. Ru(II),Rh(III),Ru(II) trimetallics of the design [{(TL)2Ru(BL)}2RhCl2](PF6)5 (TL = bpy or d8-bpy; BL = dpp or d10-dpp) covalently couple two Ru(II) LAs to a central Rh(III) RM through polyazine BLs. The complexes discussed herein are synthesized using a building block approach, permitting modification of the supramolecular architecture through multiple synthetic steps. Electrochemical analysis of the mono-, bi-, and trimetallic complexes displays several common features: a Ru-based HOMO and either a bridging ligand or Rh-based LUMO. TL and BL modification by ligand deuteration does not affect the electrochemistry of the Ru(II), Ru(II),Ru(II), Ru(II),Rh(III), or Ru(II),Rh(III),Ru(II) complexes. Likewise, utilizing a single enantiomer of the LA subunit does not modify the redox behavior of Ru(II), Ru(II),Pt(II), or Ru(II),Rh(III),Ru(II) complexes. All of the mono-, bi-, and trimetallic complexes are efficient light absorbers throughout the UV and visible with π→π* intraligand (IL) transitions in the UV and Ru(dπ)→ligand(π*) metal-to-ligand charge transfer (MLCT) transitions in the visible. Ligand deuteration does not affect the light absorbing properties of the complexes, while incorporation of chiral LA subunits imparts a preference for circularly polarized light (CPL) absorbance into supramolecular complexes. Photoexcitation of the Ru(dπ)→dpp(π*) 1MLCT results in near unity population of short-lived, weakly emissive Ru(dπ)→dpp(π*) ³MLCT excited state. In the Ru(II), Ru(II),Ru(II), and Ru(II),Pt(II) complexes, the 3MLCT excited state relaxes to the ground state by emission of a photon or vibrational relaxation processes. In the Ru(II),Rh(III) and Ru(II),Rh(III),Ru(II) complexes, the 3MLCT excited state is efficiently quenched by intramolecular electron transfer to populate a non-emissive Ru(dπ)→'Rh(dσ*) metal-to-metal charge transfer (3MMCT) excited state. Utilizing a deuterated BL, the excited-state lifetimes and quantum yield of emission (Φem) are increased for Ru(II), Ru(II),Ru(II), Ru(II),Rh(III) and Ru(II),Rh(III),Ru(II) complexes. The Ru(II),Rh(III) and Ru(II),Rh(III),Ru(II) complexes have previously been shown to be exceptional photochemical molecular devices (PMD) for photoinitiated electron collection (PEC). The ability of these complexes to undergo multiple redox cycles, efficiently absorb light, populate reactive excited states, and collect electrons at a reactive Rh metal center fulfills the requirements for H2O reduction photocatalysts. Photolysis of the Ru(II),Rh(III) and Ru(II),Rh(III),Ru(II) complexes with 470 nm light in the presence of a sacrificial electron donor and H2O substrate yields photocatalytic H2 production. Varying the BL from dpp to d10-dpp in the bimetallic architecture results in enhanced, although relatively low, catalyst efficiency producing 40 ± 10 μL H2 with dpp and 80 ± 10 μL H2 with d10-dpp in a CH3CN solvent system after 48 h photolysis. The trimetallic architecture showed no enhancement in photocatalytic efficiency and produced 210 ± 20 μL H2 with dpp and 180 ± 20 μL H2 with d10-dpp in a DMF solvent system after 20 h photolysis. The Ru(II),Rh(III) and Ru(II),Rh(III),Ru(II) complexes' behavior differs in that the excited state lifetime is the most important factor for bimetallic catalyst functioning, but intramolecular electron transfer is the most important factor for the trimetallic photocatalysts. Another important property to understand with these catalysts is their long-term stability in solution. In order for these mixed-metal complexes to be industrially useful, they must perform for long periods of time without degradation in the presence of H2O substrate and electron donors in solution. Previous examinations of Ru(II),Rh(III),Ru(II) photocatalysts have found that they can perform for ca. 50 h of photolysis, but are not as effective as the initial few hours. Special care was taken to synthesize enantiopure LA subunits and incorporate them into Ru(II),Pt(II) and Ru(II),Rh(III),Ru(II) architectures to study their photolytic stability by monitoring how long the complexes retained their chirality using electronic circular dichroism (ECD) spectroscopy. After photolyzing for longer than 200 hours with an LED light source, the quantum yield for racemization (Φrac) for the Ru(II),Pt(II) and Ru(II),Rh(III),Ru(II) architectures is 2.6 ⨉ 10⁻⁸ and 0.72 ⨉ 10⁻⁸ respectively. Also, by photolyzing in the presence of free bpy, the bi- and trimetallic complexes racemize via a non-dissociative trigonal twist mechanism. This dissertation reports the detailed analysis of the electrochemical, spectroscopic, photophysical, and photochemical properties of a series of selectively deuterated [(TL)2Ru(BL)](PF6)2, [(TL)2Ru(BL)Ru(TL)2](PF6)4, [(TL)2Ru(BL)RhCl2(TL′)](PF6)3, and [{(TL)2Ru(BL)}2RhCl2](PF6)5 (TL = bpy or d8-bpy; BL = dpp or d10-dpp; bpy = 2,2′-bipyridine; dpp = 2,3-bis(2-pyridyl)pyrazine) supramolecular complexes and a series of [(bpy)2Ru(prolinate)](PF6), [(bpy)2Ru(dpp)](PF6)2, [(bpy)2Ru(dpp)PtCl2](PF6)2, and [{(bpy)2Ru(dpp)}2RhCl2](PF6)5 supramolecular complexes with enantiopure light absorbing subunits. The design of the supramolecular architecture and intrinsic properties of each subunit contribute to the function of these systems. The careful design, synthesis and purification, thorough characterizations, and experimentation have led to deeper understanding of the molecular properties required for efficient H2O reduction. / Ph. D.

This thesis describes investigations into the photophysical properties of luminescent materials and their application in optoelectronic devices such as light emitting diodes and photodetectors. The materials used were all solution processable because of the interest in low cost processing of organics. I have investigated the photophysics of 1,4,5,8,9,12-hexamethyltriphenylene, a triphenylene derivative which has its luminescence enhanced by the addition of methyl groups. These groups change the planar shape of the triphenylene molecule into a twisted one, changing the symmetry of the molecule and increasing its dipole moment in absorption and emission by ~4 fold. This increased its rate of radiative deexcitation by ~20 times. In addition, the twisted shape of the molecule prevents intermolecular interactions and concentration effects from affecting the luminescence. This results in an efficient solid-state photoluminescence quantum yield of 31%. This thesis also includes an investigation into phosphorescent polymer dendrimers, designed to have suitable viscosities in solution for inkjet printed OLED applications. A photophysical study of the intra-chain aggregation effects on the luminescence was undertaken in both homopolymers and copolymers with high energy gap spacer units. Using double dendrons to increase the steric protection of the luminescent cores, the best homopolymers achieved 12.1% external quantum efficiency (39.3 cd/A) at 100 cd/m² brightness and the best co-polymer achieved 14.7% EQE (48.3 cd/A) at 100 cd/m². This compares favourably with 11.8% EQE for the best phosphorescent polymer and 16% for the best solution processed dendrimer OLED previously reported. Finally I have applied a solution processed enhancement layer to silicon photodiodes to enhance their ultraviolet response. Using a blend of materials to give favourable absorption and emission properties, 61% external quantum efficiency was achieved at 200 nm, which is better than the 20-30% typical for vacuum deposited lumogen enhancement layers used commercially.