Global ETD Search

21	Decision-making tool for solar system selection and design optimization : A case study of the evaluation of a photovoltaic, solar thermal and photovoltaic-thermal system in a residential building in Stockholm Parra Cerecedo, Eric January 2024 (has links) The global market share of renewable electricity generation increased at an average compound rate of 15% between 2015 and 2020 and 348 GW in 2022 alone, which could result in a renewable share of 45% in energy generation by 2030 if the current trend continues. Therefore, action is required to reduce the number of suboptimal solutions resulting from the accelerated adoption rate, while ensuring the continued exponential growth. A novel approach to streamline the workflow in residential solar installation design processes through the development of a digital tool is proposed. The solution is structured into two layers. The first layer comprises a Simulink model of the most prevalent solar technologies, namely Photovoltaic (PV), Solar Thermal (ST) and Photovoltaic Thermal (PVT). The second layer contains an economic analysis tool developed in MATLAB. The initial model performs a transient simulation of the solar installation over the course of a year, considering generic client-provided inputs, such as the available surface area, energy consumption, solar panel model, location and ambient conditions, and then extrapolates for the lifespan of the system. Subsequent to this, the second layer utilises the outputs from the Simulink model to conduct an economic analysis, identifying the key economic parameters of the installation with the objective of determining the optimal technical parameters, such as collector area, storage size and solar share, among others. A case study was conducted on a Swedish residential building with limited roof area, utilising the developed tool, with a changing number of installed solar panels. The electric and thermal effective efficiencies varied from 9.2% to 10.9% and from 20.2% to 51.8% for PV and ST systems, respectively, depending on the number of panels in the installation. For PVT systems, the effective electric, thermal and total efficiencies varied from 9.0% to 11.5%, 17.2% to 43.7%, and 26.3% to 55.2%, respectively. A Net Present Value (NPV) analysis indicated that the optimal installation comprised 70 PV panels and 30 ST panels, resulting in an NPV of €117 888. Solar energy Photovoltaic Solar thermal Photovoltaic thermal Simulation MATLAB Simulink Optimisation Annan elektroteknik och elektronik Energy Systems Energisystem Energy Engineering Energiteknik
22	Performance Evaluation of a Photovoltaic/Thermal (PVT) Collector with Numerical Modelling Ebrahim, Mila January 2021 (has links) In Photovoltaic/Thermal (PVT) technology, both PV and solar thermal technology are integrated in the same module for simultaneous electricity and heat production. Research has shown that there are multiple benefits from integrating PVT collectors with a ground source heat pump (GSHP) system, since it allows for seasonal storage of thermal energy over the year. Furthermore, it leads to reduced operating temperatures for the PVT collectors which can increase efficiency and lifetime. The aim of this study is to present the electric and thermal performance of a PVT collector developed by Solhybrid i Småland AB, for different environmental and fluid inlet conditions that can occur when PVT collectors are connected to a GSHP system. Furthermore, the performance of this PVT design is evaluated with ASHRAE (Standard 93-2003), to allow for comparison with other PVT collector designs, with values on the overall heat loss coefficient (UL) and heat removal factor (FR). The modelling tool used for the study is the software COMSOL Multiphysics, which uses the finite element method to solve the partial differential equations in heat transfer and fluid flow problems. Based on the performance curves, the thermal and electrical efficiency of the collector is approximately 48.0-53.4% and 19.0-19.2% respectively at a reduced temperature of zero and irradiance levels of 800-1000 W/m2 for the mass flow rate of 0.026 kg/sm2 which was determined as most suitable to increase thermal performance. Furthermore, these results resulted in a heat removal factor (FR) and overall heat loss coefficient (UL) of 0.56-0.62 and 53.4-53.5 W/m2 K respectively. The results on the performance of the PVT collector in different weather conditions shows that the inlet water temperature can significantly affect operating time and the amount of thermal energy that can be extracted during the year, especially if the collector operates in a colder climate like Sweden. To assess the accuracy of the created model, future work includes experimental testing of the studied PVT collector. / En panel med kombinerad teknik av både solceller och termisk solfångare (PVT) kan producera både elektricitet och värme samtidigt. Forskning har visat att det kan finnas flera fördelar med att integrera PVT-paneler med ett bergvärmesystem, eftersom det mjliggör lagring av termisk energi över året. Dessutom leder ett sådant system till lägre drifttemperaturer som kan öka PVT-panelens effektivitet och livslängd. Syftet med studien är att presentera den elektriska och termiska prestandan av en PVT-panel utvecklat av Solhybrid i Småland AB för olika driftförhållanden som kan uppstå på grund av olika väderförhållanden och inlopps-temperaturer när panelerna är kopplade till ett bergvärmesystem. Vidare utvärderas prestandan för denna panel med ASHRAEmetoden (standard 93-2003), för att möjliggöra jämförelse med andra PVT-paneler. Modelleringsverktyget som använts i studien är mjukvaran COMSOL Multiphysics, som använder finita elementmetoden för att lösa partiella differentialekvationer i värmeöverförings-och flödesproblem. Baserat på prestandakurvorna som presenteras i resultatet, är den termiska och elektriska verkningsgraden approximativt 48.0-53.4% respektive 19.0-19.2% för en reducerad temperatur med värdet noll, en solstrålning mellan 800-1000 W/m2, för en massflödeshastighet på 0.026 kg/sm2 som beslutades som den mest lämpliga för att öka den termiska prestandan. Resultaten resulterade i en värmeavledningsfaktor (FR) och total värmeförlustkoefficient (UL) på 0.56-0.62 respektive 53.4-53.5 W/m2 K. Resultaten på PVT-panelens prestanda under olika väderförhållanden visar att vattnets inloppstemperatur kan påverka drifttiden och mängden termisk energi som kan extraheras under året avsevärt, speciellt i nordiskt klimat. För att bedöma korrektheten i resultaten och den skapade modellen rekommenderas experimentell testning av den studerade PVT-panelen. Solar energy Renewable energy Photovoltaic/thermal collector PV/Thermal PVT Collector Performance Numerical modelling COMSOL Multiphysics Ground Source Heat Pump Solenergi Förnybar energi kominerad solcell/solfångare PVT panel Prestanda Numerisk modellering COMSOL Multiphysics Bergvärme Engineering and Technology Teknik och teknologier
23	Analysis of a novel thermoelectric generator in the built environment Lozano, Adolfo 05 October 2011 (has links) This study centered on a novel thermoelectric generator (TEG) integrated into the built environment. Designed by Watts Thermoelectric LLC, the TEG is essentially a novel assembly of thermoelectric modules whose required temperature differential is supplied by hot and cold streams of water flowing through the TEG. Per its recommended operating conditions, the TEG nominally generates 83 Watts of electrical power. In its default configuration in the built environment, solar-thermal energy serves as the TEG’s hot stream source and geothermal energy serves as its cold stream source. Two systems-level, thermodynamic analyses were performed, which were based on the TEG’s upcoming characterization testing, scheduled to occur later in 2011 in Detroit, Michigan. The first analysis considered the TEG coupled with a solar collector system. A numerical model of the coupled system was constructed in order to estimate the system’s annual energetic performance. It was determined numerically that over the course of a sample year, the solar collector system could deliver 39.73 megawatt-hours (MWh) of thermal energy to the TEG. The TEG converted that thermal energy into a net of 266.5 kilowatt-hours of electricity in that year. The second analysis focused on the TEG itself during operation with the purpose of providing a preliminary thermodynamic characterization of the TEG. Using experimental data, this analysis found the TEG’s operating efficiency to be 1.72%. Next, the annual emissions that would be avoided by implementing the zero-emission TEG were considered. The emission factor of Michigan’s electric grid, RFCM, was calculated to be 0.830 tons of carbon dioxide-equivalent (CO2e) per MWh, and with the TEG’s annual energy output, it was concluded that 0.221 tons CO2e would be avoided each year with the TEG. It is important to note that the TEG can be linearly scaled up by including additional modules. Thus, these benefits can be multiplied through the incorporation of more TEG units. Finally, the levelized cost of electricity (LCOE) of the TEG integrated into the built environment with the solar-thermal hot source and passive ground-based cold source was considered. The LCOE of the system was estimated to be approximately $8,404/MWh, which is substantially greater than current generation technologies. Note that this calculation was based on one particular configuration with a particular and narrow set of assumptions, and is not intended to be a general conclusion about TEG systems overall. It was concluded that while solar-thermal energy systems can sustain the TEG, they are capital-intensive and therefore not economically suitable for the TEG given the assumptions of this analysis. In the end, because of the large costs associated with the solar-thermal system, waste heat recovery is proposed as a potentially more cost-effective provider of the TEG’s hot stream source. / text Thermoelectric generator TEG Novel thermoelectric generator Thermoelectrics Thermoelectric effect Thermoelectric modules Thermoelectric device Patent application Hot stream source Cold stream source EIA EERE Systems-level analysis Energy balance Control volume analysis Thermodynamic analysis Insolation data Insolation incident on a panel Incident insolation Extraterrestrial insolation NREL Ambient temperature data NOAA Renewable energy sources Energy generation technology Electricity generation technology Thermal energy Coupled system Emissions Greenhouse gas GHG Emissions analysis Zero-emission Emissions avoided Emission factor EF Reliability First Corporation RFC Built environment Integrated into the built environment Solar-thermal energy Solar collector system Photovoltaic thermal PVT panel Thermal storage tank Geothermal energy Geothermal heat pump GHP Ground source heat pump GSHP Numerical analysis Numerical model MATLAB Finite-difference Euler explicit Electric grid Annual energetic performance Annual electricity generation Operating efficiency System efficiency Thermodynamic characterization Economic analysis Levelized cost of energy LCOE Waste heat recovery Carbon dioxide equivalent CO2e Capital costs Installed costs Operating and maintenance costs

Page generated in 0.0392 seconds