京都大学 / 0048 / 新制・課程博士 / 博士(工学) / 甲第21113号 / 工博第4477号 / 新制||工||1696(附属図書館) / 京都大学大学院工学研究科材料化学専攻 / (主査)教授 田中 勝久, 教授 三浦 清貴, 教授 作花 哲夫 / 学位規則第4条第1項該当 / Doctor of Philosophy (Engineering) / Kyoto University / DGAM

No description available.

表面プラズモン共鳴型超音波センサは高分解能な光音響顕微鏡用超音波受波器として期待されている．本研究では，サブナノ秒パルスレーザを利用したポンププローブシステムを構築してサブナノ秒域における表面プラズモン共鳴センサの熱・弾性的な過渡応答を光学的に評価した。特にプローブ光の反射率変化として観測される過渡応答の発生メカニズムについて，実験と理論の両方のアプローチから検討しており，観測される過渡応答は金属薄膜のプラズマ周波数の変化に起因することを明らかにした。 / Surface plasmon resonance (SPR) sensor has been expected as a ultrasonic sensor used in high resolution photoacoustic microscopy (PAM). In this thesis, thermoelastic transient responses in SPR sensor were evaluated by a pump probe system with a developed sub-nanosecond pulsed laser. Especially, the mechanism of the transient response to be observed as a reflectivity change of the probe light was studied by two approaches of the experiment and the theoretical estimation. As consequence of these approaches, it was revealed that the transient response was caused by the change of the plasma frequency in a thin metal film of SPR sensor. / 博士(工学) / Doctor of Philosophy in Engineering / 同志社大学 / Doshisha University

付記する学位プログラム名: 京都大学卓越大学院プログラム「先端光・電子デバイス創成学」 / 京都大学 / 新制・課程博士 / 博士(理学) / 甲第24401号 / 理博第4900号 / 新制||理||1700(附属図書館) / 京都大学大学院理学研究科物理学・宇宙物理学専攻 / (主査)教授 川上 則雄, 教授 石田 憲二, 教授 田中 耕一郎 / 学位規則第4条第1項該当 / Doctor of Science / Kyoto University / DFAM

Surface plasmon-polaritons are optical surface waves formed through the interaction of photons with free electrons at the surface of metals. They offer interesting applications in a broad range of scientific fields such as physics, chemistry, biology, and material science. However, many of such applications face limitations imposed by the high propagation losses of these waves at visible and near-infrared wavelengths, which result mainly from power dissipation in the metal. In principle, the propagation losses of surface plasmon-polaritons can be compensated through optical amplification. The objective of this thesis is to provide deeper insights on the physics of surface plasmon-polariton amplification and spontaneous emission in surface plasmon-polariton amplifiers through theoretical and experimental vehicles applied (but not necessarily restricted) to a particular plasmonic mode termed long-range surface plasmon-polariton. On the theoretical side, the objective is approached by developing a realistic theoretical model to describe the small-signal amplification of surface plasmon-polaritons in planar structures incorporating dipolar gain media such as organic dye molecules, rare-earth ions, and quantum dots. This model takes into account the inhomogeneous gain distribution formed near the metal surface due to a non-uniform excitation of dipoles and due to a position-dependent excited-state dipole lifetime that results from near-field interactions between the excited dipoles and the metal. Also, a theoretical model to describe the amplified spontaneous emission of surface plasmon-polaritons supported by planar metallic structures is developed. This model takes into account the different energy decay channels into which an exited dipole located in the vicinity of the metal can relax. The validity of this model is confirmed through experimentation. On the experimental side, the objective is approached by providing a direct experimental demonstration of complete loss compensation in a plasmonic waveguide. The experiments are conducted using the long-range surface plasmon-polariton supported by a symmetric thin gold waveguide incorporating optically pumped organic dye molecules in solution as the gain medium. Also, an experimental study of spontaneous emission in a long-range surface plasmon-polariton amplifier is presented. It is shown that this amplifier benefits from a low spontaneous emission into the amplified mode, which leads to an optical amplifier with low noise characteristics. The experimental setup and techniques are explained in detail.

Multi-photon absorption processes have received significant attention from the scientific community during the last decade, mainly because of their potential applications in optical limiting, data storage and biomedical fields. Perhaps, one of the most investigated processes studied so far has been two-photon absorption (2PA). These investigations have resulted in successful applications in all the fields mentioned above. However, 2PA present some limitations in the biomedical field when pumping at typical 2PA wavelengths. In order to overcome these limitations, three-photon absorption (3PA) process has been proposed. However, 3PA in organic molecules has a disadvantage, typical values of σ3' are small (10-81 cm6s2/photon2), therefore, 3PA excitation requires high irradiances to induce the promotion of electrons from the ground state to the final excited state. To overcome this obstacle, specific molecules that exhibit large 3PA cross-section must be designed. Thus far, there is a lack of systematic studies that correlate 3PA processes with the molecular structure of organic compounds. In order to fill the existent gap in 3PA molecular engineering, in this dissertation we have investigated the structure/property relationship for a new family of fluorene derivatives with very high three-photon absorption cross-sections. We demonstrated that the symmetric intramolecular charge transfer as well as the -electron conjugation length enhances the 3PA cross-section of fluorene derivatives. In addition, we showed that the withdrawing electron character of the attractor groups in a pull-pull geometry proved greater 3PA cross-section. After looking for alternative ways to enhance the effective σ3' of organic molecules, we investigated the enhancement of two- and three-photon absorption processes by means of Surface Plasmon. We demonstrated an enhancement of the effective two- and three-photon absorption cross-section of an organic compound of 480 and 30 folds, respectively. We proved that the enhancement is a direct consequence of the electric field enhancement at a metal/buffer interface. Next, motivated by the demands for new materials with enhanced nonlinear optical properties, we studied the 3PA of Hematoporphyrin IX and J-aggregate supramolecular systems. As a result, we were able to propose the use of 3PA in photodynamic therapy using Photofrin, the only drug approved by the FDA for PDT.

Nano and nanostructured materials offer unique physical and chemical properties that differ considerably from their bulk counterparts. For decades, due to their fascinating properties, they have been extensively explored and found to be beneficial in numerous applications. These materials are key components in many cutting-edge optic and photonic technologies, including photovoltaics, waveguides and sensors. In this dissertation, the uses of nano and nanostructured materials for optical applications are investigated in the context of optical limiting, three dimensional displays, and optical sensing. Nanomaterials with nonlinear optical responses are promising candidates for self-activating optical limiters. In the first part of this study, optical limiting properties of unexplored nanomaterials are investigated. A photoacoustic detection technique is developed as an alternative characterization method for studying optical nonlinearities. This was done with an indigenously developed setup for measuring the photoacoustic signals generated from samples excited with a pulse laser. A theoretical model for understanding the experimental observations is presented. In addition, the advantages of this newly developed technique over the existing methods are demonstrated. Blending optical sensitizers with photoconducting polymers and chromophores results in a polymer composite that is able to record a light grating. This composite can be used as recording media in 3D holographic display technology. Here, 2D nano materials, like graphenes, are used as optical sensitizers to improve the response time of a photorefractive polymer. The addition of graphenes to a PATPD/ECZ/7-DCST composite results in a three-fold enhancement in response time and therefore faster recording speed of the medium. The faster build-up time is attributed to better charge generation and mobility due to the presence of graphenes in the composite. Lastly, a facile nanofabrication technique is developed to produce metallic nanostructures with a tunable plasmonic response. The enhancement of the light-matter interactions due to these nanostructures in sensing an analyte is demonstrated.

Localized surface plasmon resonance (LSPR) is induced in metal nanoparticles by resonance between incident photons and conduction electrons in nanoparticles. For noble metal nanoparticles, LSPR can lead to strong absorbance of ultraviolet-violet light. Although it is well known that LSPR depends on the size and shape of nanoparticles, the inter-particle spacing, the dielectric properties of metal and the surrounding medium, the temperature dependence of LSPR is not well understood. By thermally annealing gold nanoparticle arrays formed by nanosphere lithography, a shift of LSPR peak upon heating has been shown. The thermal characteristics of the plasmonic nanoparticles have been further used to detect chemicals such as explosive and mercury vapors, which allow direct visual observation of the presence of mercury vapor, as well as thermal desorption measurements

Current major demands in SPR sensor development are system miniaturization and throughput improvement. Structuring an array of integrated optical SPR sensor heads on a semiconductor based optoelectronic platform could be a promising solution for those issues, since integrated optical waveguides have highly miniaturized dimension and the optoelectronic platform enables on-chip optical-to-electrical signal conversion. Utilizing a semiconductor based platform to achieve optoelectronic functionality poses requirements to the senor head; the sensor head needs to have reasonably small size while it should have reasonable sensitivity and fabrication tolerance. This research proposes a novel type of SPR sensor head and demonstrates a fabricated device with an array of integrated optical SPR sensor heads endowed with optoelectronic functionality. The novel integrated optical SPR sensor head relies on mode conversion efficiency for its operational principle. The beauty of this type of sensor head is it can produce clear contrast in SPR spectrum with a highly miniaturized and simple structure, in contrast to several-millimeter-scale conventional absorption type or interferometer type sensor heads. The integrated optical SPR sensor with optoelectronic functionality has been realized by structuring a dielectric waveguide based SPR sensor head on a photodetector-integrated semiconductor substrate. A large number of unit sensors have been fabricated on a substrate with a batch fabrication process, which promises a high throughput SPR sensor system or low-priced disposable sensors.

This thesis successfully integrates laminate microfluidic devices with an analytic Surface Plasmon Resonance (SPR) instrument. Integration was accomplished at low-cost using materials such as polydimethylsiloxane (PDMS), Poly(methyl methacrylate) (PMMA), Tygon tubing, and a 3-way stopcock. The main components of this thesis are the design and fabrication of the low-cost, in-house fluidics that can integrate with upstream microfluidics and the validation of the in-house fluidics using the Biosensing Instruments BI-2000 SPR instrument. The low-cost fluidics was designed and fabricated “in-house” using a novel investment casting technique that required the use of laser cutting technology to make a master cast, and candle wax to make the fluidic flow gasket. Integration of upstream microfluidic devices is the next step towards fully integrated point-of-care (POC) diagnostics. Development of low-cost POC diagnostics will enable physicians to diagnosis patients outside of clinical settings, granting treatment access to a much wider population. Surface Plasmon Resonance is used for its detection abilities combined with its ability to perform real-time sample analysis. Validation of the in-house fluidics was accomplished by conducting (2) experiments: (1) to compare the angular shift elicited by ethanol solutions between in-house fluidics, factory fluidics, and the literature, and (2) to compare the angular shift between in-house fluidics and factory fluidics caused by the cleaving of fibroblasts from the SPR sensor chip. Successful comparisons made in both experiments proved successful development of low-cost fluidics that could integrate upstream microfluidic devices.