La surface d'un matériau est le lieu privilégié des interactions entre le matériau et son environnement. La technique couche-par-couche, qui consiste en un dépôt alterné de polyanions et de polycations, ouvre de nouvelles perspectives dans le domaine des biomatériaux pour le contrôle de ces interactions. La cohésion des films multicouches de polyélectrolytes est principalement assurée par des interactions électrostatiques mais a été étendue à d'autres forces motrices telles que les interactions hôte-invité. Nos travaux s’articulent autour de deux axes principaux. D’une part, nous nous sommes intéressés aux films multicouches de polymères neutres basés sur des interactions hôte-invité et en particulier à l'influence de la force du complexe d’inclusion b-cyclodextrine/ferrocène sur la topographie de ces films. La force de l’interaction hôte-invité a d’abord été modulée en associant différents invités (l’adamantane, le ferrocène et le pyrène) avec la β-cyclodextrine. La force du complexe b-cyclodextrine/ferrocène a été ensuite modulée par la présence de différents sels de sodium à différentes forces ioniques au cours de la construction du film. Une force d'interaction intermédiaire du complexe semble être nécessaire pour former des films continus, tandis que, si elle est trop faible, la force d'interaction limite la construction du film.D’autre part, motivé par le fait que la prévention des infections microbiennes des dispositifs médicaux implantables constitue un problème médical et financier majeur, nous avons développé de nouveaux revêtements antimicrobiens grâce à la technique couche-par-couche. Des films multicouches à base de polysaccharides contenant la cateslytine, un peptide antimicrobien, permettent l’inhibition en 24h du développement de Candida albicans et Staphylococcus aureus, qui sont des agents pathogènes communs et virulents rencontrés dans les maladies nosocomiales. La libération des peptides antimicrobiens est déclenchée par la dégradation enzymatique du film en présence des agents pathogènes. Le revêtement est ainsi qualifié d’auto-défensif. La non-cytotoxicité du film vis-à-vis des cellules humaines permet une application cliniquement pertinente pour prévenir les infections sur les cathéters. Des dimères à base de cateslytine de différentes longueurs et un dendrimère ont été synthétisés afin d'améliorer l'activité biologique du peptide d'origine, i.e. ses propriétés antimicrobiennes et antiinflammatoires. Afin d’élaborer des films antimicrobiens mécaniquement robustes, le polyuréthane (polymère entrant dans la composition des cathéters) a été fonctionnalisé par une couche de polydopamine qui peut ensuite réagir avec des groupements thiol ou amine, permettant la fixation covalente des films de polysaccharides antimicrobiens réticulés étape par étape. / The surface of a material is the privileged location, where the interactions between the material and its environment take place. In the field of biomaterials, the challenge is to control these interactions. A very versatile coating technique is the layer-by-layer deposition, which consists in the alternated deposition of polyanions and polycations. The cohesion of polyelectrolyte multilayer films is primarily ensured by electrostatic interactions but was extended to other driving forces such as host-guest interactions. Our work was constituted of two main parts.In the first part, the buildup of neutral polymer multilayer films based on host-guest interactions was studied and in particular the influence of β-cyclodextrin/ferrocene interaction strength on the topography of these films. The host-guest interaction strength was first modulated by involving different guests (adamantane, ferrocene and pyrene) in the buildup. Then, β -cyclodextrin/ferrocene interaction strength was tuned by the presence of different types and concentrations of salts during the multilayer buildup. Intermediate interaction strength seems to be required to form continuous films, whereas, if too low, the interaction strength limits the film buildup.In the second part, motivated by the fact that the prevention of pathogen colonization of implantable medical devices constitutes a major medical and financial issue, polyelectrolyte multilayers were used as tools to develop new antimicrobial coatings. Polysaccharide multilayer films containing cateslytin, an antimicrobial peptide, fully inhibited in 24h the development of Candida albicans and Staphylococcus aureus, which are common and virulent pathogens agents encountered in care-associated diseases. The release of the antimicrobial peptides was triggered by the enzymatic degradation of the film due to the pathogens themselves introducing the concept of self-defensive coating. The non-cytotoxicity of the film, towards human cells, highlights a medically relevant application to prevent infections on catheters. Different cateslytin based dimers with various lengths and one dendrimer were synthesized in order to improve the bioactivity of the original peptide, i.e. antimicrobial and anti-inflammatory properties. In order to obtain mechanically robust antimicrobial films, polyurethane (polymer that composes catheters) was functionalized with a polydopamine layer that can further react with thiol or amine groups, allowing the covalent attachment of step-by-step cross-linked antimicrobial polysaccharide films.

Les pathologies vasculaires représentent aujourd’hui l’une des principales causes de mortalité mondiale et leur nombre ne cesse d’augmenter. Les greffons autologues (disponibilité faible) et les prothèses synthétiques inadaptées pour des vaisseaux de diamètre inférieur à 6 mm ne répondent pas à la demande et il existe aujourd’hui, un réel besoin en substitut vasculaire pour les petits vaisseaux. Ainsi, le concept de l’ingénierie vasculaire semble très prometteur. Cette approche est fondée sur l’utilisation de matrices « scaffold » associées à une composante cellulaire pour construire, dans des conditions environnementales adaptées, un vaisseau qui réponde et réagisse aux contraintes physiologiques. Dans cet objectif, la fonctionnalisation d’une media vasculaire constituée de cellules musculaires lisses (CML) est prérequise. Aux CML matures qui ne sont pas de bons candidats (perte de leur phénotype contractile lors de la culture), nous avons identifié les cellules souches mésenchymateuses (CSM) de la gelée de Wharton (tissu conjonctif du cordon ombilical) comme source cellulaire majeure. Leur facilité de récupération, leur présence en grand nombre, leur faible immunogénicité et leur capacité de prolifération et différenciation en font d’excellents candidats en ingénierie tissulaire. Dans ce travail nous avons déterminé les conditions favorables à l’obtention d’un phénotype CML fonctionnelles et montré l’impact de différents paramètres environnementaux (apport en oxygène, facteurs de croissance, teneur en sérum…) sur le comportement des CSM de la gelée de Wharton. Nous avons pu montrer que 1) ces cellules étaient capables de se différencier en cellules au phénotype contractile comparable à celui des CML matures. 2) L’utilisation des films multicouches de polyéléctrolytes (FMP) en tant que support d’adhérence cellulaire a montré que les CSM de la gelée de Wharton avaient un comportement spécifique selon la charge de surface conduisant vers une cultures tridimensionnelle inadaptée sur (PAH-PSS)3 PAH et en monocouche sur films (PAH-PSS)4, 3) Ces cellules pouvaient être cultivées sur des hydrogels d’alginate fonctionnalisés par les FMP pour fournir un feuillet cellulaire susceptible de recréer une media vasculaire. / Vascular diseases represent today one of the leading causes of global mortality and the number is increasing. Autologous transplants (limited availability) and synthetic prostheses unsuitable for vessels with a diameter less than 6 mm are not sufficient and there is now a real need of vascular substitute for small vessels. Thus, the concept of vascular engineering seems very promising. This approach is based on the use of "scaffold" associated with a cellular component to build in suitable environmental conditions, a vessel that reacts with the physiological constraints. To this aim, the functionalization of an incorporated media vascular smooth muscle cells (SMC) is a prerequisite. Insteag of using Mature CML which are not good candidates (loss of contractile phenotype in culture), we identified mesenchymal stem cells (MSCs) from Wharton's jelly (connective tissue of the umbilical cord) as a major cellular source. Their easiness of recovery, their presence in large numbers, their low immunogenicity, their proliferation and differentiation capacity make them excellent candidates for tissue engineering. In this work we determined the conditions for obtaining a functional CML phenotype and showed the impact of different environmental parameters (oxygen level, growth factors, serum content ...) on the behavior of CSM jelly Wharton. We have shown that: 1) these cells were able to differentiate into cells in contractile phenotype comparable to that of mature SMC. 2) The use of multilayer films of polyelectrolytes as cell adhesion support has shown that MSCs from the Wharton jelly had a specific behavior according to surface charge leading to an inappropriate three-dimensional cultures (PAHPSS)3-PAH and monolayer films on (PAH-PSS)4, 3) These cells could be grown on functionalized alginate hydrogels to provide a cellular sheet which may recreate a vascular media

Die Arbeit untersucht den Einfluss des pH - Wertes auf die Fluoreszenzintensität von Multischichtsystemen während des Beschichtungsvorgangs von Siliziumdioxidpartikeln mit kovalent an Polyallylaminhydrochlorid (PAH) gebundenem Rhodamin - B - Isothiocyanat. Durch eine konsequente Pufferung mit 2 -(N - Morpholino)ethansulfonsäure während der Beschichtung kann eine Verbesserung der Homogenität der Schichtbildung und eine Erhöhung der Fluoreszenzintensität erreicht werden. Außerdem liegt eine lineare Steigerung der Fluoreszenzintensität proportional zur Anzahl der fluoreszenten Schichten vor. Weiterhin sollen kolloidale Partikel unter konstanter Pufferung zusätzlich zu Rhodamin – B – Isothiocyanat mit an PAH – gebundenem Fluoresceinisothiocyanat beschichtet werden. Dieses Farbstoffpaar weist bei Annäherung eine Fluoreszenzsteigerung durch einen Fluoreszenzresonanzenergietransfer aus. Durch Variation von Schichtanzahl und Abstand wurden verschiedene Partikelpopulationen hergestellt, die sich in Ihrer Fluoreszenzintensität analog zu einem Bead Array Assay im Durchflusszytometer klar differenzieren lassen und dabei auch eine gleichmäßige Steigerung der Fluoreszenzintensität analog zur Anzahl der fluoreszenten Schichten aufweisen.

Establishing highly sophisticated polymer films for delivery systems in a biological environment and bioanalytical tasks, the formation, thickness, swelling behavior, and (physiological) stability of highly biocompatible polyelectrolyte multilayers (PEMs) are described. These PEMs are composed of the very weak polycation maltose-modified hyperbranched poly(ethyleneimine) (PEI-Mal), strongly polyanion heparin sodium salt (HE − Na +) or weakly charged polyanion hyaluronic acid sodium salt (HA-Na+) deposited on Si wafer substrates. Two different glyco architectures for PEI-Mal are used, characterized by two different degrees of maltose decoration on a PEI scaffold. Using three pH-dependent deposition approaches for optimizing the (physiological) PEM stability and swelling, PEMs are characterized by (in situ) ellipsometry, atomic force microscopy (AFM), and (in situ) attenuated total reflection-Fouriertransform infrared (ATR-FTIR). Thus, PEMs reveal significantly different thicknesses, growth mechanisms (linear versus exponential), and swelling behavior in dependence of both the polycation architectures and the deposition protocol. These PEMs will allow the study of their complexation and release properties as preswollen PEMs against anionic drug molecules, adenosine triphosphate sodium salt (ATP), especially under physiological conditions for future drug delivery coatings.

Polyelectrolyte multilayer capsules fabricated by layer-by-layer (LbL) self-assembly technique consistsing of core-shell structure have emerged as potential drug delivery systems along with their applications in micro-reactors, cosmetics, vaccines and antimicrobial coatings. Various ligands and stimuli responsive entities can be incorporated into the core and shell of the capsules for targeted delivery and/or controlled release applications. Though multilayer capsules have been studied extensively as delivery systems, their utility for encapsulation of hydrophobic drugs and multiple drugs have not been explored in detail so far. Application of traditional polyelectrolyte capsules has several limitations, which renders them inapplicable for encapsulation of multiple drugs, hydrophobic drugs and also for releasing drugs on demand without addition of the external photothermal agents such as metal nanoparticles into the shells of the capsules. Thus, in this thesis, an attempt has been made to develop novel multifunctional multilayered capsules to overcome the above mentioned limitations. We have formulated two novel methods to functionalize the core with cyclodextrin molecules and the shell of the capsules with two-dimensional material, graphene oxide (GO). The properties such as high surface area along with π bonds, broad NIR-absorption, superior photothermal conversion and antimicrobial activity of graphene oxide has been explored and it has been demonstrated that 2-D graphene oxide is unique compared to the regular polyelectrolytes. By functionalizing the shell of capsules with GO as one of the layer material, a simple and efficient way for encapsulating multiple drugs into core and shell of the capsules is achieved by utilizing the large surface area and amphiphilic nature of GO. Based on the unique optical absorption and photothermal conversion properties of GO, we have demonstrated a facile route for near-infrared (NIR)-laser triggered release with low laser power. In the second part, functionalization of the hollow core of the capsules has been functionalized using cylodextrin (CD)-incorporated CaCO3 porous sacrificial templates, where both CD-CaCO3 and CD-modified capsules are used as high efficient carriers for hydrophobic drugs. In the third part, synergistic antimicrobial therapy was achieved using composite graphene oxide/polymer LbL films by combining the intrinsic antimicrobial activity and photothermal conversion ability of graphene oxide and the results depicted superior antimicrobial activity towards E. coli. These composite films also can be used as efficient antimicrobial coatings on biomedical devices or implants. The thesis has been divided into five chapters based on the individual works. In Chapter 1, a brief review on the history of LbL self-assembly, mechanism of self-assembly along with factors affecting the process have been discussed. Followed by a brief discussion about the fabrication of multilayered hollow capsules (core-shell structure), their applications in drug delivery and fabrication of multifunctional multilayered capsules through core and shell have been discussed. Finally, recent developments in LbL self-assembly and multilayered hollow capsules using carbon based materials (fullerenes, carbon nanotubes and graphene oxide) and their biomedical applications have been presented. Chapter 2 deals with the study on fabricating multifunctional multilayered capsules for facile encapsulation of multiple drugs into the capsules, which is achieved by functionalizing the capsules with graphene oxide (GO) as one of the layer materials. The GO composite capsules exhibited unique permeability properties compared to traditional multilayered capsules made of two polyelectrolytes. Multiple drugs could be simultaneously encapsulated in the capsules in a simple and effective manner. These capsules were found to exhibit a “core-shell” loading property for encapsulation of dual drugs into the core and shell of the capsules respectively. In addition, the graphene oxide composite capsules showed excellent biocompatibility towards MCF-7 cells. This study is the first one that demonstrates the potential of hybrid polyelectrolyte capsules without the use of micelles or polymer-drug conjugates for multi-drug encapsulation. Chapter 3 deals with the development of a facile route for near-infrared (NIR)-light triggered release of encapsulated drugs from the multilayered capsules via incorporation of graphene oxide (GO) into layer-by-layer (LbL) assembled capsules without addition of any external additives such as metal nanoparticles (NPs) or carbon nanotubes (CNTs) into the shells of the capsules. Till now, there is no report on light-responsive drug delivery system by utilizing the NIR-optical absorption properties of GO. Here, graphene oxide (GO) plays a dual role, serving as a structural component of LbL capsules as well as strong NIR-light absorbing agent, which efficiently converts absorbed light into heat. Upon NIR-laser irradiation, the microcapsules were opened in “point-wise fashion” due to local heating caused by laser irradiation. The rupturing mechanism of the capsules has been clearly demonstrated using confocal fluorescence microscopy and high resolution transmission electron microscopy. The light-triggering ability of these capsules has been applied successfully to release the encapsulated anticancer drug, doxorubicin. Chapter 4 deals with simple and versatile simple routes for encapsulation of model hydrophobic drug. Encapsulation of hydrophobic drugs in pharmaceutical industries is always a big challenge due to limited number of available drug carrier systems and poor aqueous solubility of hydrophobic drugs. Here, by combining the special properties of cyclodextrins (CDs) with biodegradable inorganic calcium carbonate microparticles, the hybrid CD-CaCO3 mesoporous microparticles have been prepared for the first time. These CD-CaCO3 microparticles were utilized as sacrificial templates to prepare CDs-modified LbL capsules. We have demonstrated that both the hybrid CD-CaCO3 microparticles and CDs-modified capsules are potential carriers for encapsulation of model hydrophobic drugs (self-fluorescent coumarine and nile red dyes) with high loading efficiency using supramolecular host-guest interaction between entrapped CDs and hydrophobic dye molecules. Compared with other inorganic drug carrier systems (mesoporous silica), CaCO3 porous particles have better biocompatibility, biodegradability and cost-effective and without use of any organic solvents. Both these hybrid CD-CaCO3 microparticles and CDs-modified capsules can be good candidates for encapsulation of hydrophobic drugs without involving extreme chemical conditions for fabrication. Chapter 5 deals with development of facile synergistic method for killing pathogenic bacteria by combining the intrinsic antimicrobial activity of graphene oxide (GO) and unique photothermal conversion property of GO into a single material. We fabricated composite LbL films of graphene oxide (GO) and poly(allylamine hydrochloride) (PAH) films. Antimicrobial activity of these GO composite films has been studied using Escherichia coli (E. coli) cells by varying number of deposited layers on glass slides (20 to 80 layers) and results suggest that by increasing the number of deposited layers, antimicrobial activity is also increased gradually. Based on the unique optical properties of GO, photothermal therapy have been carried out for killing of E. coli using GO composite films by varying number of deposited layers (20 to 80 layers) by irradiation of NIR-pulse laser at 1064 nm wavelength (Nd:YAG, 10 ns pulse, 10 Hz). The photothermal results revealed the enhanced antimicrobial activity compared to GO composite films alone without NIR-laser irradiation. The synergistic photothermal killing ability along with intrinsic antimicrobial activity of GO films results in much faster killing compared to films alone.

Establishing highly sophisticated polymer films for delivery systems in a biological environment and bioanalytical tasks, the formation, thickness, swelling behavior, and (physiological) stability of highly biocompatible polyelectrolyte multilayers (PEMs) are described. These PEMs are composed of the very weak polycation maltose-modified hyperbranched poly(ethyleneimine) (PEI-Mal), strongly polyanion heparin sodium salt (HE − Na +) or weakly charged polyanion hyaluronic acid sodium salt (HA-Na+) deposited on Si wafer substrates. Two different glyco architectures for PEI-Mal are used, characterized by two different degrees of maltose decoration on a PEI scaffold. Using three pH-dependent deposition approaches for optimizing the (physiological) PEM stability and swelling, PEMs are characterized by (in situ) ellipsometry, atomic force microscopy (AFM), and (in situ) attenuated total reflection-Fouriertransform infrared (ATR-FTIR). Thus, PEMs reveal significantly different thicknesses, growth mechanisms (linear versus exponential), and swelling behavior in dependence of both the polycation architectures and the deposition protocol. These PEMs will allow the study of their complexation and release properties as preswollen PEMs against anionic drug molecules, adenosine triphosphate sodium salt (ATP), especially under physiological conditions for future drug delivery coatings.

Introduction : Les conduits nerveux synthétiques représentent une alternative chirurgicale aux autogreffes dans la réparation des traumatismes aux nerfs périphériques. Afin d’améliorer la régénération nerveuse périphérique, plusieurs biomatériels, tels que la multicouche polyélectrolyte de soie (MPE), et modèles ont été étudiés. Dans le cadre de ma maitrise, nos objectifs de recherche sont d’établir si la MPE de soie permet d’améliorer la régénération nerveuse périphérique in vivo et si notre nouveau modèle de conduit (« jelly roll ») peut mener à une meilleure régénération du nerf sciatique chez le rat que le modèle de conduit creux. Méthodes : Dans cette étude, une technique chirurgicale in vivo de lacération et de réparation du nerf sciatique chez le rat fut utilisé. Cinq conditions expérimentales de conduits (autogreffe, conduit creux avec et sans MPE de soie et « jelly roll » avec et sans MPE de soie) furent implantées (n= 2 rats par condition). Après 4 semaines, les conduits furent récupérés et marqués par immunohistochimie avec le neurofilament et la protéine basique de la myéline (MBP). La performance de chaque conduit fut évaluée par sa capacité à supporter l’excroissance axonale à travers le long du conduit et à travers la largeur de ce dernier à divers endroits. Résultats : Chaque condition expérimentale a supporté une régénération axonale avec différents degrés de succès. Globalement, l’autogreffe a supporté une plus longue croissance de fibres. De plus, la surface de fibres obtenue était plus large que les autres conditions. Les conduits avec la MPE de soie ont eu une performance similaire à leurs homologues sans soie. De plus, le modèle de conduit creux a mené à une meilleure régénération axonale que le modèle du « jelly roll ». Conclusion : L’autogreffe demeure le meilleur conduit pour supporter la régénération nerveuse périphérique. Les conduits avec la MPE de soie peuvent supporter une régénération nerveuse similaire aux conduits sans soie tandis que le modèle de « jelly roll » a généré des performances inférieures au modèle de conduit creux. / Background: Synthetic nerve conduits constitute alternative surgical options to autografts in the repair of peripheral nerve injuries. Silk polyelectrolyte multilayer (PEM) as a biomaterial and novel conduit designs have been proposed to improve peripheral nerve regeneration. In my master’s project, my objective is to assess whether silk PEM can improve peripheral nerve regeneration in vivo and to assess whether our novel conduit design (“jelly roll”) can better support rat sciatic nerve regeneration than a hollow conduit design. Methods: In this study, an in vivo rat model of sciatic nerve laceration and repair was used. Five experimental conduit conditions (autograft, hollow conduit with and without silk PEM, and jelly roll with and without silk PEM) were implanted (n=2 rats per condition). After 4 weeks, the conduits were harvested and immuno-stained for neurofilament and myelin basic protein (MBP). Conduit performance was assessed by its ability to support axonal outgrowth throughout the conduit’s length and at various locations along its width. Results: Each condition supported axonal regeneration at varying levels of success. Overall, the autograft group outperformed all other groups by supporting the longest and widest occupying regenerating fibers. Conduits with silk PEM performed similarly to conduits without silk PEM. In addition, the hollow conduit design demonstrated better regenerative outcomes than the jelly roll design. Conclusion: The autograft remains the superior conduit to support peripheral nerve regeneration. Conduits with silk PEM support nerve regeneration in the same capacity as non silk-coated conduits while the jelly roll design underperformed in comparison to the hollow conduit design.