Global ETD Search

1	FUNCTIONAL ENHANCEMENT AND APPLICATIONS DEVELOPMENT FOR A HYBRID, HETEROGENEOUS SINGLE-CHIP MULTIPROCESSOR ARCHITECTURE Hegde, Sridhar 01 January 2004 (has links) Reconfigurable and dynamic computer architecture is an exciting area of research that is rapidly expanding to meet the requirements of compute intense real and non-real time applications in key areas such as cryptography, signal/radar processing and other areas. To meet the demands of such applications, a parallel single-chip heterogeneous Hybrid Data/Command Architecture (HDCA) has been proposed. This single-chip multiprocessor architecture system is reconfigurable at three levels: application, node and processor level. It is currently being developed and experimentally verified via a three phase prototyping process. A first phase prototype with very limited functionality has been developed. This initial prototype was used as a base to make further enhancements to improve functionality and performance resulting in a second phase virtual prototype, which is the subject of this thesis. In the work reported here, major contributions are in further enhancing the functionality of the system by adding additional processors, by making the system reconfigurable at the node level, by enhancing the ability of the system to fork to more than two processes and by designing some more complex real/non-real time applications which make use of and can be used to test and evaluate enhanced and new functionality added to the architecture. A working proof of concept of the architecture is achieved by Hardware Description Language (HDL) based development and use of a Virtual Prototype of the architecture. The Virtual Prototype was used to evaluate the architecture functionality and performance in executing several newly developed example applications. Recommendations are made to further improve the system functionality.
2	Réseau sur puce sécurisé pour applications cryptographiques sur FPGA / Secure Network-on-Chip for cryptographic applications on FPGA Druyer, Rémy 26 October 2017 (has links) Que ce soit au travers des smartphones, des consoles de jeux portables ou bientôt des supercalculateurs, les systèmes sur puce (System-on-chip (SoC)) ont vu leur utilisation largement se répandre durant ces deux dernières décennies. Ce phénomène s’explique notamment par leur faible consommation de puissance au regard des performances qu’ils sont capables de délivrer, et du large panel de fonctions qu’ils peuvent intégrer. Les SoC s’améliorant de jour en jour, ils requièrent de la part des systèmes d’interconnexions qui supportent leurs communications, des performances de plus en plus élevées. Pour répondre à cette problématique les réseaux sur puce (Network-on-Chip (NoC)) ont fait leur apparition.En plus des ASIC, les circuit reconfigurables FPGA sont un des choix possibles lors de la réalisation d’un SoC. Notre première contribution a donc été de réaliser et d’étudier les performances du portage du réseau sur puce générique Hermes initialement conçu pour ASIC, sur circuit reconfigurable. Cela nous a permis de confirmer que l’architecture du système d’interconnexions doit être adaptée à celle du circuit pour pouvoir atteindre les meilleures performances possibles. Par conséquent, notre deuxième contribution a été la conception de l’architecture de TrustNoC, un réseau sur puce optimisé pour FPGA à hautes performances en latence, en fréquence de fonctionnement, et en quantité de ressources logiques occupées.Un autre aspect primordial qui concerne les systèmes sur puce, et plus généralement de tous les systèmes numériques est la sécurité. Notre dernière principale contribution a été d’étudier les menaces qui s’exercent sur les SoC durant toutes les phases de leur vie, puis de développer à partir d’un modèle de menaces, des mécanismes matériels de sécurité permettant de lutter contre des détournements d’IP, et des attaques logicielles. Nous avons également veillé à limiter au maximum le surcoût qu’engendre les mécanismes de sécurité sur les performances sur réseau sur puce. / Whether through smartphones, portable game consoles, or high performances computing, Systems-on-Chip (SoC) have seen their use widely spread over the last two decades. This can be explained by the low power consumption of these circuits with the regard of the performances they are able to deliver, and the numerous function they can integrate. Since SoC are improving every day, they require better performances from interconnects that support their communications. In order to address this issue Network-on-Chip have emerged.In addition to ASICs, FPGA circuits are one of the possible choices when conceiving a SoC. Our first contribution was therefore to perform and study the performance of Hermes NoC initially designed for ASIC, on reconfigurable circuit. This allowed us to confirm that the architecture of the interconnection system must be adapted to that of the circuit in order to achieve the best possible performances. Thus, our second contribution was to design TrustNoC, an optimized NoC for FPGA platform, with low latency, high operating frequency, and a moderate quantity of logical resources required for implementation.Security is also a primordial aspect of systems-on-chip, and more generally, of all digital systems. Our latest contribution was to study the threats that target SoCs during all their life cycle, then to develop and integrate hardware security mechanisms to TrustNoC in order to counter IP hijacking, and software attacks. During the design of security mechanisms, we tried to limit as much as possible the overhead on NoC performances. Fpga Réseau sur puce Sécurité Fpga Network-On-Chip Security
3	Hiérarchie mémoire dans les systèmes intégrés multiprocesseurs construits autour de réseaux sur puce / Memory hierarchy in embedded multiprocessor system built around networks on chip Belhadj Amor, Hela 05 October 2017 (has links) Les systèmes parallèles de type multi/pluri-cœurs permettant d'obtenir une grande puissance de calcul à bas coût énergétique sont de nos jours une réalité. Néanmoins, l'exploitation des performances de ces architectures dépend de l'efficacité du système à gérer les accès aux données. Le but de nos travaux est d'améliorer l'efficacité de ces accès en exploitant les caractéristiques de l'architecture matérielle.Dans une première partie, nous proposons une nouvelle organisation de la hiérarchie des mémoires caches qui maximise l'utilisation de l'espace de stockage disponible à chaque niveau. Cette solution, basée sur les architectures à accès non uniforme au cache (NUCA), supporte les transferts inter et intra-niveau de la hiérarchie. Elle requiert un protocole de cohérence de cache qui s'adapte à ses spécifications.Certes, le transfert des données au niveau de la hiérarchie est aussi un déterminant de la performance du système. Dans une seconde partie, nous prenons en compte les besoins de communication spécifiques du protocole. Nous proposons un réseau virtualisé comme support de communication ad-hoc afin de gérer le trafic de cohérence à moindre coût. Ce dernier relie les caches d'un même niveau pour supporter les transferts intra-niveaux, qui sont une spécificité de notre protocole, en vue de réduire la latence moyenne d'accès. / Multi/many-cores parallel systems for high-power computing at low energy costs are nowadays a reality. However, exploiting the performance of these architectures depends on the efficiency of the system in managing data accesses. The aim of our work is to improve the efficiency of these accesses by exploiting the hardware architecture characteristics.In a first part, we propose a new cache hierarchy organization that aims at maximizing the use of the available storage space at each level. This solution, based on non-uniform cache access architectures (NUCA), supports inter and intra-level transfers of the hierarchy. It requires a cache coherency protocol that suits its specifications.Obviously, the transfer of data in the hierarchy is also a determinant of the system performance. In a second part, we consider the specific communication needs of the protocol. We suggest the use of a virtualized network as an ad-hoc communication medium to manage consistency traffic at a lower cost. It links the caches of the same level to support intra-level transfers, which are a specificity of our protocol, in order to reduce the average access latency. Hiérarchie mémoire Cohérence Réseau sur Puce (NoC) Non Uniform Cache Architecture (NUCA) Multi-Processor System-On-Chip (MPSoC Memory hierarchy Consistency Network-On-Chip (NoC) Non Uniform Cache Architecture (NUCA) 004
4	Design and Development of a CubeSat Hardware Architecture with COTS MPSoC using Radiation Mitigation Techniques Vasudevan, Siddarth January 2020 (has links) CubeSat missions needs components that are tolerant against the radiation in space. The hardware components must be reliable, and it must not compromise the functionality on-board during the mission. At the same time, the cost of hardware and its development should not be high. Hence, this thesis discusses the design and development of a CubeSat architecture using a Commercial Off-The- Shelf (COTS) Multi-Processor System on Chip (MPSoC). The architecture employs an affordable Rad-Hard Micro-Controller Unit as a Supervisor for the MPSoC. Also, it uses several radiation mitigation techniques such as the Latch-up protection circuit to protect it against Single-Event Latch-ups (SELs), Readback scrubbing for Non- Volatile Memories (NVMs) such as NOR Flash and Configuration scrubbing for the FPGA present in the MPSoC to protect it against Single-Event Upset (SEU)s, reliable communication using Cyclic Redundancy Check (CRC) and Space packet protocol. Apart from such functionalities, the Supervisor executes tasks such as Watchdog that monitors the liveliness of the applications running in the MPSoC, data logging, performing Over-The-Air Software/Firmware update. The thesis work implements functionalities such as Communication, Readback memory scrubbing, Configuration scrubbing using SEM-IP, Watchdog, and Software/Firmware update. The execution times of the functionalities are presented for the application done in the Supervisor. As for the Configuration scrubbing that was implemented in Programmable Logic (PL)/FPGA, results of area and latency are reported. / CubeSat-uppdrag behöver komponenter som är toleranta mot strålningen i rymden. Maskinvarukomponenterna måste vara pålitliga och funktionaliteten ombord får inte äventyras under uppdraget. Samtidigt bör kostnaden för hårdvara och dess utveckling inte vara hög. Därför diskuterar denna avhandling design och utveckling av en CubeSatarkitektur med hjälp av COTS (eng. Custom-off-The-Shelf) MPSoC (eng. Multi Processor System-on-Chip). Arkitekturen använder en prisvärd strålningshärdad (eng. Rad-Hard) Micro-Controller Unit(MCU) som Övervakare för MPSoC:en och använder också flera tekniker för att begränsa strålningens effekter såsom kretser för att skydda kretsen från s.k. Single Event Latch-Ups (SELs), återläsningsskrubbning för icke-volatila minnen (eng. Non-Volatile Memories) NVMs som NOR Flash och skrubbning av konfigurationsminnet skrubbning för FPGA:er i MPSoC:en för att skydda dem mot Single-Event Upsets (SEUs), och tillhandahålla pålitlig kommunikation mha CRC och Space Packet Protocol. Bortsett från sådana funktioner utför Övervakaren uppgifter som Watchdog för att övervaka att applikationerna som körs i MPSoC:en fortfarande är vid liv, dataloggning, och Over- the-Air-uppdateringar av programvaran/Firmware. Examensarbetet implementerar funktioner såsom kommunikation, återläsningsskrubbning av minnet, konfigurationsminnesskrubbning mha SEM- IP, Watchdog och uppdatering av programvara/firmware. Exekveringstiderna för utförandet av funktionerna presenteras för den applikationen som körs i Övervakaren. När det gäller konfigurationsminnesskrubbningen som implementerats i den programmerbara logiken i FPGA:n, rapporteras area och latens. Single-Event Upset Single-Event Latch-up Cyclic Redundancy Check Scrubbing Radiation hardened Micro-Controller Unit Error Injection Space packet protocol NOR Flash Magnetoresistive RAM Computer and Information Sciences Data- och informationsvetenskap
5	Modeling, Simulation, and Injection of Camera Images/Video to Automotive Embedded ECU : Image Injection Solution for Hardware-in-the-Loop Testing Lind, Anton January 2023 (has links) Testing, verification and validation of sensors, components and systems is vital in the early-stage development of new cars with computer-in-the-car architecture. This can be done with the help of the existing technique, hardware-in-the-loop (HIL) testing which, in the close loop testing case, consists of four main parts: Real-Time Simulation Platform, Sensor Simulation PC, Interface Unit (IU), and unit under test which is, for instance, a Vehicle Computing Unit (VCU). The purpose of this degree project is to research and develop a proof of concept for in-house development of an image injection solution (IIS) on the IU in the HIL testing environment. A proof of concept could confirm that editing, customizing, and having full control of the IU is a possibility. This project was initiated by Volvo Cars to optimize the use of the HIL testing environment currently available, making the environment more changeable and controllable while the IIS remains a static system. The IU is an MPSoC/FPGA based design that uses primarily Xilinx hardware and software (Vivado/Vitis) to achieve the necessary requirements for image injection in the HIL testing environment. It consists of three stages in series: input, image processing, and output. The whole project was divided in three parts based on the three stages and carried out at Volvo Cars in cooperation by three students, respectively. The author of this thesis was responsible for the output stage, where the main goal was to find a solution for converting, preferably, AXI4 RAW12 image data into data on CSI2 format. This CSI2 data can then be used as input to serializers, which in turn transmit the data via fiber-optic cable on GMSL2 format to the VCU. Associated with the output stage, extensive simulations and hardware tests have been done on a preliminary solution that partially worked on the hardware, producing signals in parts of the design that could be read and analyzed. However, a final definite solution that fully functions on the hardware has not been found, because the work is at the initial phase of an advanced and very complex project. Presented in this thesis is: important theory regarding, for example, protocols CSI2, AXI4, GMSL2, etc., appropriate hardware selection for an IIS in HIL (FPGA, MPSoC, FMC, etc.), simulations of AXI4 and CSI2 signals, comparisons of those simulations with the hardware signals of an implemented design, and more. The outcome was heavily dependent on getting a certain hardware (TEF0010) to transmit the GMSL2 data. Since the wrong card was provided, this was the main problem that hindered the thesis from reaching a fully functioning implementation. However, these results provide a solid foundation for future work related to image injection in a HIL environment. ADAS AD ADS HIL Hardware in the loop Hardware-in-the-loop ECU VCU Automotive Embedded System Systems Camera Image Video Injection FPGA MPSoC Vivado Vitis VHDL Volvo Cars FMC HPC LPC MIPI CSI2 GMSL2 AMBA AXI4 Xilinx RTL Implementation Synthesis Intelectual Property IP Vehicle computing unit Electronic control unit TEB0911 TEF0007 TEF0010 CSI2 Tx CSI2 Tx Subsystem Zynq SerDes AXI4 AXI4-Lite Programmable Logic PL Processor System PS C C++ Video test pattern generator VTPG Axi traffic generator ATG Ultrascale+ Virtual input/output VIO Integrated logic analyzer ILA Interface Unit Embedded Systems Inbäddad systemteknik

1

Page generated in 0.0609 seconds