A formação e propagação de fissuras é um fenômeno observado em diversos materiais utilizados na engenharia, como concreto, metais, cerâmicas e rochas. Tendo em vista a grande influência que fissuras têm no comportamento global da estrutura o objetivo deste trabalho consiste na implementação de um modelo de fissura com descontinuidades fortes incorporadas a fim de analisar o processo de fratura em materiais quase-frágeis. A descontinuidade no campo de deslocamentos (descontinuidade forte) é representada através da introdução de graus de liberdade adicionais no interior do elemento finito, sendo esta abordagem denominada enriquecimento elementar (E-FEM). Nestes modelos a fissura pode se propagar em qualquer direção dentro do elemento finito, evitando a necessidade de redefinição da malha em cada etapa, além de fornecer resultados relativamente independentes da malha de elementos finitos utilizada. Por serem internos a cada elemento finito, os graus de liberdade adicionais podem ser eliminados da solução global por condensação estática. Desta forma as descontinuidades são definidas em nível de elemento e o modelo pode ser facilmente implementado em códigos computacionais existentes. O modelo implementado foi proposto por Dvorkin, Cuitiño e Gioia (1990), o qual pertence à classe de modelos com formulação assimétrica estaticamente e cinematicamente consistente (SKON). Esta formulação é caracterizada por garantir o movimento de corpo rígido entre as partes do elemento além de assegurar a continuidade de tensões na linha de fissura, resultando numa matriz de rigidez assimétrica. Diferentes relações constitutivas podem ser utilizadas para descrever o comportamento das regiões com e sem fissura. Portanto, para a região não fissurada, utilizouse um modelo constitutivo elástico linear e para a região fissurada foi analisada a performance de dois modelos constitutivos distintos: linear e exponencial. A capacidade de representar o comportamento de elementos estruturais fissurados foi ilustrada através de exemplos de tração e flexão comparados com outros modelos de fissura existentes e com resultados experimentais. Em relação aos modelos constitutivos para a linha da fissura, o modelo linear não se mostrou adequado por superestimar as tensões de pico além de apresentar um ramo de amolecimento mais frágil. Já o modelo exponencial mostrou-se bastante eficiente representando de forma correta o comportamento de materiais quase-frágeis. / The formation and propagation of cracks is a phenomenon observed in many materials used in engineering, such as concrete, metals, ceramics and rocks. In view of the influence of cracks in the global behavior of the structure, the aim of this work is the implementation of an embedded strong discontinuity model in order to analyze the fracture process in quasi-brittle materials. The discontinuity in the displacement field (strong discontinuity) is represented by the introduction of additional degrees of freedom within the finite element. This approach is called elemental enrichment (E-FEM). The embedded models allow the propagation of crack in any direction within the finite element, avoiding the need of remeshing and providing objective results (mesh independent). The additional degrees of freedom are introduced into the finite element, then these degrees can be eliminated from the global solution by static condensation and the model can be easily implemented in existent computational codes. The model used here was proposed by Dvorkin, Cuitiño and Gioia (1990), which belongs to the statically and kinematically optimal non-symmetric (SKON) formulation. In this formulation, the kinematics that allows for relative rigid body motion and the enforcement of the traction continuity are introduced at element level, resulting a non-symmetric formulation. Different constitutive relations can be used to describe the behavior of the zones with and without cracks. For the zone without cracks it was used a linear elastic model and for the cracked zone it was analyzed the behavior of two different constitutive models: linear and exponential. The ability of the model to represent the behavior of cracked structural elements was illustrated by bending and tensile tests and the results were compared with numerical and experimental data. Regarding the constitutive models for the fracture zone, it was concluded that the linear model was not suitable because it overestimated the maximum stress and promoted a britller softening. In contrast, the exponential model proved to be very efficient to represent the behavior of quasi-brittle materials.

A formação e propagação de fissuras é um fenômeno observado em diversos materiais utilizados na engenharia, como concreto, metais, cerâmicas e rochas. Tendo em vista a grande influência que fissuras têm no comportamento global da estrutura o objetivo deste trabalho consiste na implementação de um modelo de fissura com descontinuidades fortes incorporadas a fim de analisar o processo de fratura em materiais quase-frágeis. A descontinuidade no campo de deslocamentos (descontinuidade forte) é representada através da introdução de graus de liberdade adicionais no interior do elemento finito, sendo esta abordagem denominada enriquecimento elementar (E-FEM). Nestes modelos a fissura pode se propagar em qualquer direção dentro do elemento finito, evitando a necessidade de redefinição da malha em cada etapa, além de fornecer resultados relativamente independentes da malha de elementos finitos utilizada. Por serem internos a cada elemento finito, os graus de liberdade adicionais podem ser eliminados da solução global por condensação estática. Desta forma as descontinuidades são definidas em nível de elemento e o modelo pode ser facilmente implementado em códigos computacionais existentes. O modelo implementado foi proposto por Dvorkin, Cuitiño e Gioia (1990), o qual pertence à classe de modelos com formulação assimétrica estaticamente e cinematicamente consistente (SKON). Esta formulação é caracterizada por garantir o movimento de corpo rígido entre as partes do elemento além de assegurar a continuidade de tensões na linha de fissura, resultando numa matriz de rigidez assimétrica. Diferentes relações constitutivas podem ser utilizadas para descrever o comportamento das regiões com e sem fissura. Portanto, para a região não fissurada, utilizouse um modelo constitutivo elástico linear e para a região fissurada foi analisada a performance de dois modelos constitutivos distintos: linear e exponencial. A capacidade de representar o comportamento de elementos estruturais fissurados foi ilustrada através de exemplos de tração e flexão comparados com outros modelos de fissura existentes e com resultados experimentais. Em relação aos modelos constitutivos para a linha da fissura, o modelo linear não se mostrou adequado por superestimar as tensões de pico além de apresentar um ramo de amolecimento mais frágil. Já o modelo exponencial mostrou-se bastante eficiente representando de forma correta o comportamento de materiais quase-frágeis. / The formation and propagation of cracks is a phenomenon observed in many materials used in engineering, such as concrete, metals, ceramics and rocks. In view of the influence of cracks in the global behavior of the structure, the aim of this work is the implementation of an embedded strong discontinuity model in order to analyze the fracture process in quasi-brittle materials. The discontinuity in the displacement field (strong discontinuity) is represented by the introduction of additional degrees of freedom within the finite element. This approach is called elemental enrichment (E-FEM). The embedded models allow the propagation of crack in any direction within the finite element, avoiding the need of remeshing and providing objective results (mesh independent). The additional degrees of freedom are introduced into the finite element, then these degrees can be eliminated from the global solution by static condensation and the model can be easily implemented in existent computational codes. The model used here was proposed by Dvorkin, Cuitiño and Gioia (1990), which belongs to the statically and kinematically optimal non-symmetric (SKON) formulation. In this formulation, the kinematics that allows for relative rigid body motion and the enforcement of the traction continuity are introduced at element level, resulting a non-symmetric formulation. Different constitutive relations can be used to describe the behavior of the zones with and without cracks. For the zone without cracks it was used a linear elastic model and for the cracked zone it was analyzed the behavior of two different constitutive models: linear and exponential. The ability of the model to represent the behavior of cracked structural elements was illustrated by bending and tensile tests and the results were compared with numerical and experimental data. Regarding the constitutive models for the fracture zone, it was concluded that the linear model was not suitable because it overestimated the maximum stress and promoted a britller softening. In contrast, the exponential model proved to be very efficient to represent the behavior of quasi-brittle materials.

Nous proposons une nouvelle approche inspirée des modèles d'endommagement non-locaux pour décrire la ruine des matériaux quasi-fragiles désordonnés. Les hétérogénéités matériaux sont introduites à une échelle continue mésoscopique via des variations spatiales de la résistance à l'endommagement alors que le mécanisme de redistribution des contraintes est décrit à travers une fonction d'interaction que l'on peut faire varier. L'évolution spatio-temporelle de l'endommagement est déterminée à partir du principe de conservation d'énergie et caractérisée via une étude statistique des précurseurs à la rupture. Cette approche nous permet de prédire la valeur des seuils de localisation et de rupture en fonction de la nature des redistributions. A l'approche de la rupture, nous mettons également en évidence une augmentation en loi de puissance du taux d'énergie dissipée ainsi qu'une longueur de corrélation, supportant l'interprétation de la rupture quasi-fragile comme un phénomène critique. En effet, nous démontrons que notre model d'endommagement s'apparente à la loi d'évolution d'une interface élastique évoluant dans un milieu désordonné. Cette analogie nous permet d'identifier les paramètres d'ordre et de contrôle de cette transition critique et d'expliquer les invariances d'échelle des fluctuations dans la limite champ moyen. Enfin, nous appliquons ces concepts théoriques à travers l'étude expérimentale de la compression d'un empilement bidimensionnel de cylindres élastiques. Notre approche permet de décrire de façon quantitative la réponse mécanique non-linéaire du matériau, et en particulier la statistique des précurseurs ainsi que la localisation des déformations. / We propose a novel approach inspired from non-local damage continuum mechanics to describe damage evolution and quasi-brittle failure of disordered solids. Heterogeneities are introduced at a mesoscopic continuous scale through spatial variations of the material resistance to damage. The central role played by the load redistribution during damage growth is analyzed by varying the interaction function used in the non-local model formulation. The spatio-temporal evolution of the damage field is obtained from energy conservation arguments, so that the formulation is thermodynamically consistent. We analytically determine the onsets of localization and failure that appear controlled by the redistribution function. Damage spreading is characterized through a complete statistical analysis of the spatio-temporal organization of the precursors to failure. The power law increase of the rate of energy dissipated by damage and an extracted correlation length close to failure supports the interpretation of quasi-brittle failure as a critical phenomena. Indeed, we establish a connection between our damage model and the evolution law of an elastic interface driven in a disordered medium. It allows to identify the order and control parameters of the critical transition, and capture the scale-free statistical properties of the precursors within the mean field limit. Finally, we experimentally investigate the coaction of localized dissipative events and elastic redistributions in disordered media via compression experiments of two-dimensional arrays of hollow soft cylinders. Our experimental observations show a quantitative agreement with the predictions derived following our approach.

No description available.

Le problème initial traité dans cette thèse relève du cadre général de la modélisation des tunnels profonds. Pour cela, on a adopté l'approche basée sur la mécanique linéaire de la rupture. L'étude s'est appuyée sur le critère mixte de Leguillon. Suite à cette étude, on a pu tirer que ce n'est pas le critère mixte qui est insuffisant mais plutôt la façon d'aborder le problème. D'où le passage à la prise en compte de l'hétérogénéité du matériau constitutif et la possibilité d'amorçage d'une fissure sous une contrainte de compression. Une première approche a été entreprise par l'étude d'une bicouche périodique sous contrainte de compression verticale. La couche de grande raideur s'est apparue le siège d'une traction transversale. Effectivement la possibilité d'amorçage d'une fissure est tout à fait probable grâce toujours à la vérification des critères d'énergie et de contrainte. Une deuxième approche consistait à observer au plus près la microstructure du matériau ; on a considéré le problème d'une inclusion elliptique dans une matrice infinie. Par la méthode des variables complexes et la technique de la transformation conforme, on a analysé le champ de contrainte autour de l'inclusion et on a mis en évidence la présence d'une traction qui dépend fortement des paramètres choisis. Par la méthode des éléments finis étendus, on a calculé la variation de l'énergie potentielle mise en jeu par la création d'une fissure. Par une démarche semblable à l'approche précédente, à savoir la vérification des critères d'énergie et de contrainte, on a conclu à la possibilité d'amorçage d'une fissure. Mots clefs : mécanique linéaire de la rupture, critère mixte de Leguillon, énergie potentielle, taux de restitution d'énergie, méthode des éléments finis étendus, bicouche périodique, méthode des variables complexes / The initial problem treated in this thesis falls within the general framework of modeling deep tunnels. For this reason, the approach based on linear fracture mechanics was adopted. The study was based on the mixed criterion of Leguillon. Following This study, the mixed criterion was not insufficient but the way to approach the problem was. Where the transition to the consideration of the heterogeneity of the material component and the possibility of initing a crack under a compressive stress. A first approach was undertaken the study of periodic bilayer under the stress of vertical compression. The layer of the highest stiffness has appeared the seat of a transverse traction. Indeed the possibility to initiate a crack is quite likely always through the verification of the energy and the stress criteria. A second approach was to observe more closer the microstructure of the material; we have considered the problem of elliptic inclusion in an infinite matrix. By the method of complex variables and the technique of conformal mapping, we analyzed the stress field around the inclusion and were revealed the presence of a traction which depends strongly of the selected parameters. By the extended finite element method, we calculated the variation of the potential energy involved by creating a fracture. In a similar approach to the previous one, namely verification of the energy and the stress criteria, we concluded the possibility of initiating a crack. Keywords: linear fracture mechanics, mixed criterion of Leguillon, potential energy, energy release rate, extended finite element method, periodic bilayer, method of complex variables

Pour l'analyse de durabilité et la conception économique (moins de matériel) de structures en matériaux ressemblant à du béton, la modélisation de la rupture est essentielle. Dans le cadre de la mécanique des milieux continus, une longueur interne est introduite dans les modèles non locaux pour remédier au problème lié à la sensibilité du maillage qui est une pathologie des modèles d'endommagement classiques , lorsqu'il s'agit de matériaux adoucissantes. Toutefois, l'évaluation de la longueur interne de hétérogénéités du matériau est toujours une question difficile, ce qui rend un problème obscur en utilisant des modèles non locaux. Nos travaux portent sur le développement d'un outil numérique basée sur la méthode des éléments en treillis (LEM) qui est un modèle discret pour la simulation et la prévision de la rupture des structures en béton. En utilisant le modèle de réseau à l'échelle mésoscopique, il n'est pas nécessaire d'introduire une longueur interne dans la loi de comportement, comme cela se fait dans les modèles non locaux, et nous pouvons affranchir ce paramètre en introduisant explicitement la mesotructure matérielle via une description géométrique. Basé sur l'outil numérique développé, nous avons étudié, en effectuant des tests numériques de traction uniaxiale, l'influence géométrique de la mesotructure du matériau ainsi que l'influence des conditions aux limites et de tailles d'échantillons (qui se traduisent par le gradient de sollicitation et le champ de rotation de matériel différents) sur le taille de la FPZ (fracture process zone) et sur la longueur caractéristique du matériau quasi-fragile homogénéisé. Ces études fournissent des recommandations/avertissements lors de l'extraction d'une longueur interne nécessaire pour les modèles nonlocaux à partir de la microstructure du matériau. Par ailleurs, les études contribuent un aperçu direct de l'origine mésoscopic de la taille FPZ et la longueur de la caractéristique du matériau, et par conséquent sur l'origine et la nature du comportement non linéaire du matériau. Ensuite, nous avons implanté le modèle du treillis dans la bibliothèque de SOFA développé par l'INRIA pour réaliser le couplage avec la méthode des éléments finis (MEF) afin de faire face avec des structures à grande échelle. Nous avons proposé un algorithme de couplage entre une approche macroscopique représentée par MEF et une approche mésoscopique infligés par LEM au sein d'une manière adaptative. Le modèle de couplage est d'abord utilisée pour valider l'approche multi-échelle proposée sur des simulations heuristiques. Et à long terme, il fournit un outil prometteur pour des simulations de grandes structures en matériaux quasi-fragiles de la vie réelle. / For durability analysis and economic design (less material) of structures made of concrete-like materials, modeling of cracking process and failure is essential. In the framework of continuum mechanics, an internal length is introduced in nonlocal models to remedy the problem related to mesh sensitivity which is a pathology of classical damage models, when dealing with softening materials. However, the assessment of the internal length from heterogeneities of the material is still a difficult question, which makes an obscure issue in using nonlocal models. Our work concerns developing of a numerical tool based on the Lattice Element Method (LEM) which is a discrete model for simulating and predicting fracture in concrete(-like) material. Using the lattice model at the mesoscopic scale, there is no need to introduce any internal length in the constitutive law, as done in nonlocal models, and we can enfranchise this parameter by explicitly introducing the material mesotructure via geometric description. Based on the developed numerical tool, we studied, by performing numerical uniaxial tensile tests, the geometric influence of the material mesotructure as well as the influence of the boundary conditions and specimen sizes (that result in different stress gradient and material rotation field) on the size of the FPZ (Fracture Process Zone) and on the characteristic length of the homogenized quasi-brittle material. These studies provide recommendations/warnings when extracting an internal length required for nonlocal damage models from the material microstructure. Moreover, the studies contribute a direct insight into the mesoscale origin of the FPZ size and the material characteristic length, and consequently into the origin and nature of the nonlinear behavior of the material. Then, we implemented the lattice model into SOFA library developed by INRIA for realizing the coupling with the Finite Element Method (FEM) in order to deal with large-scale structures. We proposed a strong coupling algorithm between a macroscopic approach represented by FEM and a mesoscopic approach dealt by LEM within an adaptive manner. The coupling model is first used to validate the multiscale approach proposed on heuristic simulations. And in the long term, it provides a promising tool for simulations of large-scale structures made of quasi-brittle materials of real life.

The accurate description of the nonlinear structural behaviour is an important issue in engineering science. Usually, classic nonlinear theories, such as fracture and damage mechanics, applied to finite element programmes are used to fulfil that purpose. Classic fracture mechanics describes the structural deterioration process by a few discrete cracks. This theory presents good precision for structures with simple geometries, few cracks and homogeneous materials. Classic damage mechanics measures the deterioration process by an internal variable called damage. This theory has been successful in the description of several deterioration mechanisms in continuum media. Despite their accuracy, classic fracture and damage mechanics present some drawbacks. Firstly, regarding civil engineering problems, both theories are not suitable for some practical applications. Secondly, fracture mechanics demands the consideration of initial cracks to begin the analysis. Lastly, classic damage models may present an issue known as localisation, what essentially leads to ill-posed problems and mesh-dependent numerical algorithms. Alternatively, a recent theory, called lumped damage mechanics, was proposed in order to achieve good accuracy in actual engineering problems. Such theory applies key concepts from fracture and damage mechanics in plastic hinges. In the light of the foregoing, the main goal of this thesis is the extension of the lumped damage mechanics framework to analyse different engineering problems. So far, lumped damage mechanics was characterised as a simplified methodology to analyse reinforced concrete frames under seismic and monotonic loadings; even with a few contributions on the analysis of local buckling in metallic structures. Therefore, this work extends the lumped damage mechanics framework to analyse reinforced concrete arches, unreinforced concrete structures, high cycle fatigue and continuum problems. The application examples show the accuracy of the proposed methodologies. / A descrição acurada do comportamento não linear de estruturas é um problema importante na engenharia. Usualmente, teorias não lineares clássicas, tais como as mecânicas da fratura e do dano, aplicadas a programas de elementos finitos são utilizadas a fim de cumprir aquele propósito. A mecânica da fratura clássica descreve o processo de deterioração estrutural por meio de um pequeno número de fissuras discretas. Esta teoria apresenta boa precisão para estruturas com geometrias simples, poucas fissuras e materiais homogêneos. A mecânica do dano clássica tem sido exitosa na descrição de diversos mecanismos de deterioração em meios contínuos. Apesar de precisas, as abordagens clássicas em fratura e dano apresentam alguns entraves. Primeiramente, tratando-se de problemas da engenharia civil, ambas teorias não são adequadas para aplicações práticas. Em segundo lugar, os modelos clássicos de fratura demandam a consideração de fissuras iniciais para iniciar a análise. Por fim, os modelos clássicos de dano podem apresentar um problema conhecido como localização, o que essencialmente implica em problemas mal colocados e algoritmos com dependência de malha. Alternativamente, uma teoria recente, chamada teoria do dano concentrado, foi proposta a fim de obter boa precisão em problemas reais de engenharia. Tal teoria aplica conceitos-chave das mecânicas da fratura e do dano em rótulas plásticas. À luz do exposto, o principal objetivo desta tese é a extensão da teoria do dano concentrado para analisar diferente problemas da engenharia. Até então, a teoria do dano concentrado era caracterizada como uma metodologia simplificada para analisar pórticos de concreto armado sob solicitações monotônicas ou sísmicas; mesmo com algumas poucas contribuições na análise de instabilidade local em estruturas metálicas. Desta forma, este trabalho estende a teoria do dano concentrado a fim de analisar arcos de concreto armado, estruturas de concreto simples, fadiga de alto ciclo e problemas contínuos. Os exemplos de aplicação mostram a acurácia das metodologias propostas.

[pt] O processo de fraturamento de materiais quase-frágeis requer atenção especial para a predição da direção de propagação de fraturas. A simulação do fraturamento com o método dos elementos finitos (MEF) tem como desvantagem a dependência da trajetória da fratura com respeito à malha adotada. Além disso, há certa dificuldade para os modelos numéricos representarem a fratura em modo misto por conta dos parametros envolvidos. O Método dos Elementos Finitos Estendido (XFEM) é uma técnica que combina o MEF com funções de enriquecimento para representar descontinuidades no campo de deslocamentos. Neste contexto, discutem-se nesta dissertação os critérios para a nucleação e propagação de fraturas e sua implementação no contexto do XFEM. As implementações foram feitas no framework GeMA, um software desenvolvido no Tecgraf / PUC-Rio. Os critérios de propagação de fraturas implementados baseiamse na abordagem das tensões e permitem controlar diferentes geometrias e tamanhos da área de avaliação na ponta da trinca. Um estudo paramétrico é apresentado para modelar uma viga de concreto sob carregamento não proporcional com fratura em modo misto. Foram consideradas diferentes questões como: discretização da malha, zona de avaliação, iniciação e propagação de fraturas e técnicas de controle de solução. Além disso, outros modelos com diferentes condições de contorno foram analisados para validar os critérios em situações complexas. As constatações paramétricas obtidas através do estudo da viga se monstraram válidas para os demais modelos avaliados. As implementações dos critérios de propagação de fraturas no XFEM, demonstraram excelentes concordâncias nas simulações das trajetórias de fraturamento, comparado com os dados experimentais. / [en] The fracture process of quasi-brittle materials requires special attention for the prediction of the direction of fracture propagation. The fracture simulation with the finite element method (FEM) has as its disadvantage the dependence of the fracture trajectory with respect to the mesh adopted. Besides, there is some difficulty for numerical models to represent the fracture in mixed mode because of the parameters involved. The Extended Finite Element Method (XFEM) is a technique which combines the FEM with enrichment functions to represent discontinuities in the displacement field. In this context, this dissertation discusses the criteria for nucleation and propagation of fractures and their implementation in the context of XFEM. The implementations were made in the GeMA framework, a software developed at Tecgraf / PUC-Rio. The implemented crack growth criteria is based on the stress approach and allows to control different geometries and sizes of the evaluation area in the crack tip. A parametric study is presented for modeling a concrete beam under nonproportional loading with mixed-mode fracture. Different situations were taken into account such as mesh refinement, geometry and size of the evaluation region, crack initiation and propagation and solution control techniques. Also, several models with different loading and boundary conditions were made to validate the criteria under complex situations. The parametric findings obtained through the study of the beam proved to be valid for the other models. The implementations of the fracture propagation criteria in the XFEM demonstrated excellent agreement in the simulations of the fracture trajectories compared to the experimental data.

L’estimation de la durée de vie et de la rupture de structures composées par des matériaux quasi-fragiles nécessite le développement de nouveaux modèles théoriques et numériques. Dans ce travail, la modélisation de l’apparition des fissures et leur propagation en chargement monotone est d'abord étudiée. Un modèle d'effet de taille pour les structures fissurées et sa forme généralisée pour les structures présentant des défauts plus complexes qu’une fissure sont développés. Les prédictions du modèle de rupture sont comparées à des résultats expérimentaux de la littérature pour divers spécimens composés de différents matériaux et de différentes tailles. Des échantillons présentant des défauts initiaux en forme de V et en forme de trou illustrent les capacités de la formulation. Ensuite, l’endommagement et la fissuration induite par des chargements cycliques en fatigue sont discutés. Un modèle local en éléments discrets est développé, qui permet de coupler les deux mécanismes (endommagement et fissuration). Les prédictions numériques sont comparées aux résultats théoriques et expérimentaux. À la fin, les applications associées au comportement du béton bitumineux renforcé par des grilles en fibres de verres sont analysées en détail. / The prediction of the fatigue life and the rupture of structures made of quasi-brittle materials requires the development of new theoretical and numerical models. In this work, the modelling of the crack initiation and propagation under monotonic loading is firstly investigated. A size effect model for cracked structures and its generalized form for structures with defects more complex than a crack are developed. The predictions of the proposed model are compared with experimental results from the literature for various specimens of different materials and sizes. Samples with initial V-shaped and hole-shaped defects exemplify the formulation's capabilities. Then, the damage and cracking induced by cyclic fatigue loads is discussed. A local model using discrete elements is developed, that allows the coupling of two mechanisms (damage and fatigue cracking). The numerical results are compared to those of experimental bending fatigue tests. Finally, applications associated with the behavior of fiber glass reinforced asphalt concrete are analyzed in detail.

The accurate description of the nonlinear structural behaviour is an important issue in engineering science. Usually, classic nonlinear theories, such as fracture and damage mechanics, applied to finite element programmes are used to fulfil that purpose. Classic fracture mechanics describes the structural deterioration process by a few discrete cracks. This theory presents good precision for structures with simple geometries, few cracks and homogeneous materials. Classic damage mechanics measures the deterioration process by an internal variable called damage. This theory has been successful in the description of several deterioration mechanisms in continuum media. Despite their accuracy, classic fracture and damage mechanics present some drawbacks. Firstly, regarding civil engineering problems, both theories are not suitable for some practical applications. Secondly, fracture mechanics demands the consideration of initial cracks to begin the analysis. Lastly, classic damage models may present an issue known as localisation, what essentially leads to ill-posed problems and mesh-dependent numerical algorithms. Alternatively, a recent theory, called lumped damage mechanics, was proposed in order to achieve good accuracy in actual engineering problems. Such theory applies key concepts from fracture and damage mechanics in plastic hinges. In the light of the foregoing, the main goal of this thesis is the extension of the lumped damage mechanics framework to analyse different engineering problems. So far, lumped damage mechanics was characterised as a simplified methodology to analyse reinforced concrete frames under seismic and monotonic loadings; even with a few contributions on the analysis of local buckling in metallic structures. Therefore, this work extends the lumped damage mechanics framework to analyse reinforced concrete arches, unreinforced concrete structures, high cycle fatigue and continuum problems. The application examples show the accuracy of the proposed methodologies. / A descrição acurada do comportamento não linear de estruturas é um problema importante na engenharia. Usualmente, teorias não lineares clássicas, tais como as mecânicas da fratura e do dano, aplicadas a programas de elementos finitos são utilizadas a fim de cumprir aquele propósito. A mecânica da fratura clássica descreve o processo de deterioração estrutural por meio de um pequeno número de fissuras discretas. Esta teoria apresenta boa precisão para estruturas com geometrias simples, poucas fissuras e materiais homogêneos. A mecânica do dano clássica tem sido exitosa na descrição de diversos mecanismos de deterioração em meios contínuos. Apesar de precisas, as abordagens clássicas em fratura e dano apresentam alguns entraves. Primeiramente, tratando-se de problemas da engenharia civil, ambas teorias não são adequadas para aplicações práticas. Em segundo lugar, os modelos clássicos de fratura demandam a consideração de fissuras iniciais para iniciar a análise. Por fim, os modelos clássicos de dano podem apresentar um problema conhecido como localização, o que essencialmente implica em problemas mal colocados e algoritmos com dependência de malha. Alternativamente, uma teoria recente, chamada teoria do dano concentrado, foi proposta a fim de obter boa precisão em problemas reais de engenharia. Tal teoria aplica conceitos-chave das mecânicas da fratura e do dano em rótulas plásticas. À luz do exposto, o principal objetivo desta tese é a extensão da teoria do dano concentrado para analisar diferente problemas da engenharia. Até então, a teoria do dano concentrado era caracterizada como uma metodologia simplificada para analisar pórticos de concreto armado sob solicitações monotônicas ou sísmicas; mesmo com algumas poucas contribuições na análise de instabilidade local em estruturas metálicas. Desta forma, este trabalho estende a teoria do dano concentrado a fim de analisar arcos de concreto armado, estruturas de concreto simples, fadiga de alto ciclo e problemas contínuos. Os exemplos de aplicação mostram a acurácia das metodologias propostas.