Materiais frágeis, tal como o silício, têm sido utilizados em sistemas microeletromecânicos, semicondutores e dispositivos ópticos infravermelhos. Estes materiais são considerados de difícil usinabilidade devido à tendência de sofrerem fraturas. O grande desafio na usinagem dos materiais cristalinos é alcançar uma remoção de material por deformações plásticas (regime dúctil), pois, nessas condições as superfícies ópticas usinadas são geradas sem nenhum dano. Esse regime de usinagem pode ser alcançado em escalas submicrométricas, de forma que, em muitos cristais, as pressões impostas pela ferramenta são altas o suficiente para conduzirem uma transformação de fase do material, favorecendo, assim, a usinagem. Embora pesquisas sobre a relação entre a endentação e a usinagem tenham sido desenvolvidas, a busca por métodos matemáticos com base nas forças e deformações de endentação para serem usados em usinagem de modo a identificar as condições ótimas para remoção de material em regime dúctil não são triviais. O presente trabalho propõe uma relação mais direta com os resultados de endentação para determinar os parâmetros ótimos de usinagem dos materiais frágeis, correlacionando a área da face do endentador em contato e a área efetiva da secção de corte em usinagem. Para isso, ensaios de endentação e experimentos de usinagem com ferramenta de diamante foram realizados em escala micro e nanométrica. O material analisado aqui foi o silício monocristalino (100). Uma matriz experimental foi planejada para as possíveis correlações da variação do ângulo de saída da ferramenta e do avanço de usinagem com as áreas de endentação e o surgimento das trincas e fraturas; forças de usinagem e a pressão de transição frágil-dúctil; tensão residual; espessura crítica de corte e o estado das superfícies usinadas. Em relação às durezas obtidas, foi preciso separá-las em dois estágios: antes do surgimento das trincas durante a endentação e depois desse ponto. Durante a usinagem, a melhor remoção de material em regime dúctil foi obtida na direção mais dura do silício. Os ângulos de saída que proporcionaram resultados desfavoráveis em termos de integridade superficial foram o de -25° e ângulos mais negativos que -60°. A pressão de transição se apresentou de 12 GPa a 13 GPa, sendo que as energias específicas de corte seguiram o mesmo comportamento: 9 j/mm³ a 10 j/mm³ respectivamente. A tensão residual se mostrou inversamente proporcional às forças de usinagem. As espessuras crítica-efetivas de corte variaram de 100 nm a 560 nm. Os valores das espessuras críticas de corte estimadas pelos ensaios de endentação variaram de 200 nm a 530 nm. Portanto, foi possível mostrar que os valores de espessura crítica estimados pelo método proposto, com base nos resultados de endentação, corresponderam muito bem às espessuras críticas obtidas nos experimentos de usinagem. Assim sendo, torna-se possível determinar por meio de tal técnica os valores ótimos de usinagem, podendo ser aplicada para qualquer material cristalino. / Brittle materials, such as silicon, have been used in microelectromechanical systems, semiconductor and infrared optical devices. These types of materials are considered of difficult to machine due to the tendency to suffer fractures. The great challenge in the machining of crystalline materials is to achieve a removal of material by plastic deformations (ductile regime), because in these conditions the machined optical surfaces are generated without any superficial damage. This type of machining can be achieved on a submicrometric machining scale, so that the pressures imposed by the tool are high and lead to a phase transformation of many crystals favoring the machining in ductile regime. Although research on the relationship between microindentation and micromachining has been developed, the search for mathematical methods based on the forces and the deformations of indentation to be used in machining in order to identify the machining conditions under regime ductile are non-trivial. The present work proposes a more direct relationship with the results of the indentation to determine the optimal parameters of the fragile materials, correlating the indenter face area and the cutting section effective area in machining. For this purpose, indentation tests and diamond tool machining experiments were carried out on a micro and nanometric scale. The material analyzed here was monocrystalline silicon (100). An experimental matrix was planned for the possible correlations of the variation of the tool rake angle and of the machining feed with the areas of indentation and the beginning of cracks and fractures; cutting forces and the fragile-ductile transition pressure; residual stress; critical cutting thickness and the state of machined surfaces. In relation to the hardness obtained, it was necessary to separate them in two stages: before the emergence of the cracks during the indentation and after that point. During machining, the best removal of ductile material was obtained in the hardest direction of the silicon. The rake angles which gave unfavorable results in terms of surface integrity were -25° and angles more negative than -60°. The transition pressure reached values from 12 GPa to 13 GPa, and the specific shear energies followed the same behavior: 9 j/mm³ at 10 j/mm³ respectively. The residual stress was inversely proportional to the machining forces. Critical-effective uncut thicknesses ranged from 100 nm to 560 nm. The values of the critical uncut thicknesses estimated by the indentation tests ranged from 200 nm to 530 nm. Therefore, it was possible to show that the critical thickness values estimated by the proposed method, based on indentation results, corresponded very well to the critical thickness obtained in the machining experiments. Thus, it is possible to determine by means of such a technique the optimum values of machining, which can be applied to crystalline material.

Third generation mobile communication systems promise a greater data rate and new services to the mobile subscribers. 3G systems support up to 2 Mbps of data rate to a fixed subscriber and 144 Kbps of data rate to a fully mobile subscriber. Code Division Multiple Access (CDMA) is the air interface access scheme widely used in all the 3G communication systems. This access scheme has many inherent advantages m terms of noise immunity, security, coherent combining of multi path signals etc. But all these advantages come at the expense of higher complexity of the receivers. The receivers form the major portion of the processing involved in a base station. The heart of any CDMA receiver is the RAKE. The RAKE receiver separates the different multi-paths received by the antenna by using the properties of the Pseudo Random sequences. The phase and strength of each of these path signals is measured and are used by the coherent combiner, which de-rotates all the signals to a single reference and coherently combines them In general the Base station receivers make use of the top three multi-path signals ranked in terms of their signal energy Hence four RAKE fingers, each catering to single multi-path are needed for receiving a single code channel (3 for coherent combining and one for scanning). One such channel receiver requires a processing power of 860 MIPS (Mega Instructions Per Second). Some of the CDMA standards support up to 90 code channels at the same time. This means that the total processing power required at the base station is about 80 GIPS. This much of processing power will require large number of high end DSPs, which will be a very costly solution. In the current base station architectures these blocks are implemented using ASICs, which are specific to a particular standard and also the algorithms used for the different operations are fixed at the design time itself. This solution is not flexible and is not amenable for SDR (Software defined Radio) architectures for the Base stations. This thesis proposes a Co-Processor solution, which can be attached to a generic DSP or any other processor. The processor can control the Co-Processor by programming its parameter registers using memory mapped register accesses. This co-processor implements only those blocks, which are compute intensive. This co-processor performs all chip-rate processing functions involved m a RAKE receiver. All the symbol-rate functions are implemented through software in the processor. This provides more choices m selecting the algorithms for timing recovery and scanning. The algorithms can be changed through software even after the base station is installed in the field. All the inputs and outputs of the Co-Processor are passed through dual port RAMs with independent read and write clocks. This allows the Co-Processor and the processor to be running on two independent clocks. This memory scheme also increases the throughput as the reads and writes to these memories can happen simultaneously. This thesis introduces a concept of incorporating programmable PN/Gold code generators as part of the Co-Processor, which significantly reduces the amount of memory required to store the Scrambling and Spreading codes. The polynomial lengths as well as the polynomials of the code generator are programmable. The input signal memory has a bus width equal to 4 times the bus width of the IQ signal bus width (4 * 24 = 96 bits) towards the Co-Processor to meet the huge data bandwidth requirement. This memory is arranged as word interleaved memory banks. This can supply one word per memory bank on each clock cycle as long as the accessed words fall in different memory banks. The number of banks is chosen as more than twice that of the number of Correlators/ Rake fingers. This gives more flexibility in choosing the address offsets to different Correlator inputs. This flexibility allows one to use different timing recovery schemes since the number of allowable address offsets for different Correlators is more. The overall complexity of the solution is comparatively less with respect to the generic DSP based solution and much easier to modify for a different standard, when compared to the rigid ASIC based solution. The proposed solution is significantly different from the conventional way of designing the Base station with fixed ASICs and it clearly outweighs the solutions based on conventional approach in terms of flexibility, design complexity, design time and cost.

viii, 261 p. A print copy of this thesis is available through the UO Libraries. Search the library catalog for the location and call number. / My dissertation analyzes the rake, the libertine male, a figure whose liminal masculinity and transgressive appetites work both to stabilize and unsettle hegemony in the texts in which he appears. The rake may seem no more than a sexy bad boy, unconnected to wider social, political, and economic concerns. However, my project reveals his central role in reflecting, even shaping, anxieties and desires regarding gender and sexuality, race and ethnicity. I chart the rake's progress from his origins in the Restoration era to the early twenty-first century. Chapter II examines William Wycherley's comedy The Country Wife in concert with John Dryden's Marriage à la Mode and Aphra Behn's The Rover to analyze the rake's emergence in seventeenth-century theatre and show that his transgression of borders real and figurative plays out the anxieties and aspirations of an emerging British empire. Chapter III uses John Gay's ballad opera The Beggar's Opera, a satiric interrogation of consumerism and criminality, to chart the rake in eighteenth-century British theatre as Britain's investment in global capitalism and imperialism increased. My discussion of Opera is framed by Richard Steele's early-century sentimental comedy The Conscious Lovers and Hannah Cowley's late-century The Belle's Stratagem, a fusion of sentiment and wit. Chapter IV hinges the project's theatre and film sections, analyzing Oscar Wilde's fin-de-siècle comedy The Importance of Being Earnest as a culmination of generations of theatre rakes and an anticipation of the film rakes of the modern and post-modern eras. Dion Boucicault's mid-century London Assurance is used to set up Wilde's queering of the rake figure Chapter V brings the rake to a new medium, film, and a new nation, the United States, as the figure catalyzes American tension over race and gender in early twentieth-century films such as Cecil B. DeMille's The Cheat, George Melford's The Sheik, and Ernest Lubitsch's Trouble in Paradise. My final chapter reads contemporary films, including Jenniphr Goodman's The Tao of Steve, Chris Weitz and Paul Weitz's About a Boy, and Gore Verbinski's trilogy Pirates of the Caribbean for Disney Studios, to assess the ways in which millennial western masculinity is in stasis. / Committee in charge: Dianne Dugaw, Co-Chair; Priscilla Ovalle, Co-Chair; Kathleen Karlyn; John Schmor

Across populations, bottlenose dolphins (Tursiops sp.) exhibit a fission-fusion pattern of associations, in which group size and composition change fluidly throughout the day. Beneath this seemingly ephemeral social structure, considerable variation exists across study sites. While females typically have moderate bonds with one another within a large social network, male-male bonds are variable, though males typically take one of two strategies; some males encounter females individually for opportunities to breed while others cooperate within a first-order alliance to collectively herd females. In addition, multi-tiered alliances in which two first-order alliances cooperate to defend or assist in the theft of a female have been documented within Shark Bay, Australia. However, these patterns do not apply to all study sites, as intersexual bonds are strong within several bottlenose dolphin populations. Given the variation in the presence and complexity of male alliances, greater documentation of social structure and male mating strategies across study sites is needed to draw conclusions as to the ultimate factors behind alliance formation. As such, chapter one documents the inclusion of a new study site in the St. Johns River (SJR) in Northeast Florida where males form first and second-order alliances. In addition, variables from the SJR are included within a meta-analysis in chapter two, the first systematic examination of what variables correlate with alliance presence and complexity, with the conclusion that male-male competition best describes the patterns seen in male alliance formation. Chapter three builds upon this conclusion by examining seasonal trends in tooth rake marks, a proxy for aggression, across the sexes and males of two different mating strategies, ultimately highlighting the potential for non-reproductive aggression. Together, this work provides greater insight as to the social structure and mating patterns of bottlenose dolphins, as well as to the ecological pressures that result in complex sociality.

No description available.

Since the frantic race towards the Shannon bound [1] commenced in the early 1950’s, linear block codes have become integral components of most digital communication systems. Both binary and non-binary linear block codes have proven themselves as formidable adversaries against the impediments presented by wireless communication channels. However, prior to the landmark 1974 paper [2] by Bahl et al. on the optimal Maximum a-Posteriori Probability (MAP) trellis decoding of linear block codes, practical linear block code decoding schemes were not only based on suboptimal hard decision algorithms, but also code-specific in most instances. In 1978 Wolf expedited the work of Bahl et al. by demonstrating the applicability of a block-wise Viterbi Algorithm (VA) to Bahl-Cocke-Jelinek-Raviv (BCJR) trellis structures as a generic optimal soft decision Maximum-Likelihood (ML) trellis decoding solution for linear block codes [3]. This study, largely motivated by code implementers’ ongoing search for generic linear block code decoding algorithms, builds on the foundations established by Bahl, Wolf and other contributing researchers by thoroughly evaluating the VA decoding of popular binary and non-binary linear block codes on realistic narrowband and wideband digital communication platforms in lifelike mobile environments. Ideally, generic linear block code decoding algorithms must not only be modest in terms of computational complexity, but they must also be channel aware. Such universal algorithms will undoubtedly be integrated into most channel coding subsystems that adapt to changing mobile channel conditions, such as the adaptive channel coding schemes of current Enhanced Data Rates for GSM Evolution (EDGE), 3rd Generation (3G) and Beyond 3G (B3G) systems, as well as future 4th Generation (4G) systems. In this study classic BCJR linear block code trellis construction is annotated and applied to contemporary binary and non-binary linear block codes. Since BCJR trellis structures are inherently sizable and intricate, rudimentary trellis complexity calculation and reduction algorithms are also presented and demonstrated. The block-wise VA for BCJR trellis structures, initially introduced by Wolf in [3], is revisited and improved to incorporate Channel State Information (CSI) during its ML decoding efforts. In order to accurately appraise the Bit-Error-Rate (BER) performances of VA decoded linear block codes in authentic wireless communication environments, Additive White Gaussian Noise (AWGN), flat fading and multi-user multipath fading simulation platforms were constructed. Included in this task was the development of baseband complex flat and multipath fading channel simulator models, capable of reproducing the physical attributes of realistic mobile fading channels. Furthermore, a complex Quadrature Phase Shift Keying (QPSK) system were employed as the narrowband communication link of choice for the AWGN and flat fading channel performance evaluation platforms. The versatile B3G multi-user multipath fading simulation platform, however, was constructed using a wideband RAKE receiver-based complex Direct Sequence Spread Spectrum Multiple Access (DS/SSMA) communication system that supports unfiltered and filtered Complex Spreading Sequences (CSS). This wideband platform is not only capable of analysing the influence of frequency selective fading on the BER performances of VA decoded linear block codes, but also the influence of the Multi-User Interference (MUI) created by other users active in the Code Division Multiple Access (CDMA) system. CSS families considered during this study include Zadoff-Chu (ZC) [4, 5], Quadriphase (QPH) [6], Double Sideband (DSB) Constant Envelope Linearly Interpolated Root-of- Unity (CE-LI-RU) filtered Generalised Chirp-like (GCL) [4, 7-9] and Analytical Bandlimited Complex (ABC) [7, 10] sequences. Numerous simulated BER performance curves, obtained using the AWGN, flat fading and multi-user multipath fading channel performance evaluation platforms, are presented in this study for various important binary and non-binary linear block code classes, all decoded using the VA. Binary linear block codes examined include Hamming and Bose-Chaudhuri-Hocquenghem (BCH) codes, whereas popular burst error correcting non-binary Reed-Solomon (RS) codes receive special attention. Furthermore, a simple cyclic binary linear block code is used to validate the viability of employing the reduced trellis structures produced by the proposed trellis complexity reduction algorithm. The simulated BER performance results shed light on the error correction capabilities of these VA decoded linear block codes when influenced by detrimental channel effects, including AWGN, Doppler spreading, diminished Line-of-Sight (LOS) signal strength, multipath propagation and MUI. It also investigates the impact of other pertinent communication system configuration alternatives, including channel interleaving, code puncturing, the quality of the CSI available during VA decoding, RAKE diversity combining approaches and CSS correlation characteristics. From these simulated results it can not only be gathered that the VA is an effective generic optimal soft input ML decoder for both binary and non-binary linear block codes, but also that the inclusion of CSI during VA metric calculations can fortify the BER performances of such codes beyond that attainable by classic ML decoding algorithms. / Dissertation (MEng(Electronic))--University of Pretoria, 2006. / Electrical, Electronic and Computer Engineering / unrestricted

This thesis deals with mining of relevant information from documents and automatic splitting of multiple documents merged together. Moreover, it describes the design and implementation of software for data mining from documents and for automatic splitting of multiple documents. Methods for acquiring textual data from scanned documents, named entity recognition, document clustering, their supportive algorithms and metrics for automatic splitting of documents are described in this thesis. Furthermore, an algorithm of implemented software is explained and tools and techniques used by this software are described. Lastly, the success rate of the implemented software is evaluated. In conclusion, possible extensions and further development of this thesis are discussed at the end.

La végétation aquatique submergée (VAS) est une composante essentielle qui structure les écosystèmes aquatiques continentaux. Elle soutient plusieurs fonctions et services écosystémiques, dont le soutien d’habitats pour la faune, la stabilisation du rivage, le maintien d’une eau claire et la régulation des cycles des nutriments. Cependant, la VAS est soumise aux activités humaines qui modifient leur habitat, altère leur quantité et menacent le maintien de ces services. L’objectif de cette thèse est de mieux comprendre comment les quantités de la VAS répond aux variations environnementales et quels sont les effets de ces modifications sur les fonctions et services qu’elle soutient. Cet objectif est abordé de différents angles d’attaque et à différentes échelles spatiales et temporelles. Tout d’abord, une nouvelle méthode permettant des économies de temps et d’argent pour mesurer la biomasse de la VAS est proposée. À l’aide de deux modèles de calibration, la méthode combine trois techniques existantes couramment utilisées pour estimer la biomasse de la VAS : le prélèvement de biomasse dans des quadrats en plongée, le prélèvement à l’aide d’un râteau manié depuis la surface et l’échosondage à partir d’une embarcation. Cette approche offre l’avantage de limiter l’utilisation risquée et fastidieuse du quadrat avec plongeur, mais fournissant la mesure de biomasse la plus fiable. La première calibration avec le quadrat permet d’utiliser le râteau et corrige son biais, alors que la deuxième calibration entre râteau et échosondage convertit les valeurs mesurées par cette dernière en biomasse. L’utilisation de l’échosondage permet ainsi d’estimer plus rapidement la biomasse à grande échelle. La méthode est validée à partir de données d’échosondage qui sont confrontées avec des biomasses par quadrat, démontrant la robustesse de l’approche. Ensuite, les variations climatiques interannuelles et leurs effets sur la rétention de l’azote ont été évalués pendant six étés dans un herbier aquatique à la confluence de deux tributaires agricoles avec le fleuve Saint-Laurent. Des budgets d’azote journalier ont été estimés par la différence entre les concentrations modélisées de nitrate dans les tributaires et les concentrations sortantes de l’herbier mesurées par une sonde à haute fréquence. La rétention totale a été partitionnée en assimilation autotrophe et en dénitrification à partir de la variation diurne en nitrate. Les budgets ont été confrontés à un indice de biomasse de VAS, la pente de la surface du niveau de l’eau, qui a révélé un portrait détaillé de l’évolution de la biomasse au cours de la saison de croissance. Les résultats montrent que la rétention est influencée par les variations de niveau de l’eau, de température, de biomasse de la VAS et d’apports en nitrate. De hauts taux de consommation de nitrate sont rapportés, parmi les plus élevés mesurés en rivière, avec une biomasse accrue de plantes accrue favorisant l’élimination permanente par la dénitrification. Enfin, une synthèse sur les tendances, les facteurs globaux déterminant les quantité de VAS dans les lacs ainsi que comment les quantité y ont été mesurées est présentée. La compilation a été effectuée à l’aide d’une recherche par mot clés réalisée sur une base de données bibliographiques. La synthèse montre un portrait dynamique dans le temps et dans l’espace des quantités de VAS. Bien que les déclins de quantités soient prédominants, plusieurs séries temporelles récentes indiquent une récupération de la VAS, patrons qui varient selon les régions et les activités humaines. Les usages dans les bassins versants liés à l’eutrophisation sont associés aux déclins, particulièrement en Asie, alors que les augmentations sont surtout associées à la gestion de la VAS en Europe. Les tendances plus variables en Amérique du Nord sont associées à l’arrivée d’espèces envahissantes. Cette thèse innove en fournissant une nouvelle méthode qui facilite la mesure de la biomasse de la VAS à grande échelle. Elle contribue également aux connaissances sur la VAS et le cycle de l’azote en grande rivière en caractérisant la variation de la rétention de nitrate et en soulignant leur important rôle comme site de transformation dans ces écosystèmes. Finalement, elle contribue à la biogéographie de la VAS continentale dans les lacs, indique des lacunes de connaissance, souligne les développements méthodologiques souhaitables et informe sur l’influence de facteurs expliquant la variation de la VAS qui seront utiles pour sa gestion future. Ces informations seront profitables au maintien des fonctions et services soutenus par la VAS et à son utilisation comme une solution fournie par la nature face aux changements globaux. / Submerged aquatic vegetation (SAV) is an essential component that structures inland waters. SAV sustains numerous ecosystem services and functions, such as providing habitat for fauna, stabilizing shoreline, maintaining clear water and regulating nutrient cycles. However, SAV is submitted to human activities that modify their habitat, alter their quantities and threaten the ecosystem services they may provide. The objective of this thesis is to better understand how SAV quantities responds to environmental variations, and what are the effect of these modifications on the functions and services they sustain. This objective is approached in different ways and at various spatial and temporal scales. First, a new cost-effective method to measure SAV biomass is proposed. The method combines three existing techniques by means of two calibration models. This approach has the advantage of reducing the hazardous and cumbersome use of quadrats with divers, whilst providing the most accurate biomass measure. The first calibration with the quadrat allows for the application of the rake and corrects for its bias, while the second calibration between rake and echosounding converts the values measured by the latter into biomass. The use of echosounding thus allows for the estimation of biomass more rapidly at larger scale. The method is validated from echosounding data that are compared to quadrat biomasses, demonstrating the robustness of the approach. Second, interannual climate variation and their effect on nitrogen retention were evaluated during six summers in a SAV meadow at the confluence zone of two agricultural tributaries with the Saint Lawrence River. Daily nitrogen budgets were estimated as the difference between modelled nitrate concentration in the tributaries and concentration outflowing the SAV meadow measured with a high frequency sensor. Total retention was partitioned into autotrophic assimilation and denitrification from the diel nitrate variation. The budgets were compared to an indicator of SAV biomass, the slope of water level surface, which provided a detailed portrait of biomass changes throughout the growing season. The results show that retention is influenced by variation in water levels, temperature, SAV biomass and nitrate inputs. Among the highest nitrate uptake rates are reported compared to previous measurements in inland waters, with plant biomass favoring permanent removal through denitrification. Third, a synthesis on trends and drivers of SAV quantities in lakes, as well as on how it was measured is presented. The compilation was conducted from a keyword search on a bibliographic database. The synthesis shows a dynamic depiction in space and time of SAV quantities. Although decreasing quantities are predominant, many recent time series indicate SAV recovery, and these patterns vary with regions and human activities. Direct activities in watersheds leading to eutrophication are associated with decreases, particularly in Asia, while increases are more associated with SAV management in Europe. Trends are more variable in North America due to invasive species. This thesis innovates by providing a new method facilitating SAV biomass measurement at large scale. The thesis also contributes to knowledge on SAV and on nitrogen cycling in large rivers by characterizing the variation in nitrate retention. Finally, the thesis contributes to inland SAV biogeography, identifies knowledge gaps, indicates desirable methodological developments and informs on drivers of SAV that could inform its future management. This information will be beneficial for the preservation of the ecosystem services and functions provided by SAV and its use as a nature-based solution against global changes.

This master’s thesis deals with a new design of bar screens. The goal was to come up with an alternative design to already existing device by INKOS a. s. In the first part, there is a summary of various machines working in similiar conditions. The insights gained by this research influenced the design of the new device. It utilizes well proven solutions from previous projects, but some of these were reworked and a few new functions were added. Second part of the thesis describes the analytical solutions, which were used to determine the forces in the assembly during the operation of the device. Based on the results of these calculations, a strength analysis of important components was performed using the finite element method. The result of this thesis is the design and optimization of new bar screens, including engineering drawings and tools for its further development.