Leakage of stored bulk phase CO₂ is of particular risk to sequestration in deep saline aquifers due to the fact that when injected into typical saline aquifers, the CO₂ rich gas phase has lesser density than the aqueous phase resulting in buoyancy driven flow of the fluids. As the CO₂ migrates upward, the security of its storage depends upon the trapping mechanisms that counteract the migration. While there are a variety of trapping mechanisms the mechanism serving as motivation for this research is local capillary trapping. Local capillary trapping occurs during buoyancy-driven migration of bulk phase CO₂ within a saline aquifer (Saadatpoor, 2009). When the rising CO₂ plume encounters a region where capillary entry pressure is locally larger than average, CO₂ accumulates beneath the region. While research is continued by means of numerical simulation, research at the bench scale is needed to validate the conclusions made from simulation work. Presented is the development of a bench scale experiment whose objective is to assess local capillary trapping. The initial step in accomplishing this objective is to understand the fluid dynamics of CO₂ and brine in a saline aquifer which is categorized as two phase immiscible buoyancy driven displacement. Parameters influencing this displacement include density, viscosity, wettability and heterogeneity. A bench scale environment created to be analogous to CO₂ and brine in a saline aquifer is created in a quasi-two dimensional experimental apparatus, which allows for observation of plume migration at ambient conditions. A fluid pair analogous to supercritical CO₂ and brine is developed to mimic the density and viscosity relationship found at pressure and temperature typical of storage aquifers. The influences of viscosity ratio, density differences, porous medium wettability and heterogeneity are observed in series of experimental sequences. Three different fluid pairs with different viscosity ratios and density differences are used to assess density and viscosity influences. Porous media of varying grain size and wettability are used to assess the influence of heterogeneity and wettability. Results are qualitatively consistent with theoretical results and those from previous works. / text

In the context of the development of renewable energy sources in the U.K., and of the increase in anthropogenic atmospheric CO2, it is important to develop alternative ways of providing energy to the community. The shift to renewable sources of electricity comes to a cost: variable generation. At present, an important part of the renewable electricity capacity is being curtailed during low demand periods. One way to ensure that electricity supply matches demand is to store excess energy when it is available and deliver it when demand cannot be met by primary generation alone. Compressed Air Energy Storage (CAES) allows this storage. The aim of this project is to build upon existing knowledge on CAES using porous rocks (PM-CAES) to assess the technical feasibility for this storage technology to be developed offshore of the UK. The focus is on inter-seasonal storage. This assessment is undertaken by developing geological and power plant models to calculate the storage potential of offshore UK formations. Modelling of a conceptual aquifer air store enables approximations of the subsurface pressure response to CAES operations. These pressure changes are coupled with surface facilities models to provide estimates of both load/generation capacity and roundtrip efficiencies. Algebraic predictive models can be developed from the results of a sensitivity analysis of the store and plant idealised models. Screening of the CO2 Stored database, containing data on geological formations offshore of the UK (initially developed for CO2 storage), was then performed to estimate PM-CAES potential using the predictive models. The results suggest that there is substantial PM-CAES potential in the UK. Results indicate an energy storage potential in the range of 77-96 TWh, which can be released over 60 days. A geographic information system (GIS) study was then performed to identify the portion of the identified storage potential colocated with offshore windfarm. 19 TWh of the storage potential identified is colocated with windfarm and would be achievable at an average levelised cost of electricity of 0.70 £/kWh.

Master of Science / Department of Geology / Saugata Datta / In response to increasing concerns over release of anthropogenic greenhouse gases the Arbuckle saline aquifer in south-central Kansas has been proposed as a potential site for geologic storage for CO2. Two wells (KGS 1-32 and 1-28) have been drilled to provide data for site specific determination of the storage potential of the Arbuckle. Cores from specific depths within Arbuckle (4164`-5130`) were utilized for study and flow-through experiments. Examination of formation rocks by thin section studies, SEM, XRD and CT scans was carried out to characterize the mineralogy of the core. Dominant mineralogy throughout the formation is dolomite with large chert nodules and occasional zones with pyrite and argillaceous minerals. Carbonate-silica contacts contain extensive heterogeneity with sulfide minerals and argillaceous material in between. Extensive vugs and microfractures are common. This study focuses on three zones of interest: the Mississippian pay zone (3670`-3700`), a potential baffle in Arbuckle (4400`-4550`) and the proposed CO2 injection zone (4900`-5050`). Drill stem tests and swabbed brine samples collected from 13 depths throughout the aquifer reveal a saline brine (~50,000-190,000 TDS) dominated by Na+, Ca2+ and Cl-. Elemental ratios of major cations with Cl- demonstrate a typical saline aquifer system. Cl/Br ratios reveal mixing between primary and secondary brines within the aquifer. Ca/Cl and Mg/Cl ratios suggest effect of dolomitization within the brines. δ18O and δ2H isotopes and Li/Cl ratios in the brine suggest the separation of upper and lower Arbuckle by a baffle zone. Swabbed waters provide Fe speciation data and reveal the importance of it in the system. Laboratory experiments carried out at 40°C and 2100 psi using formation core plug and collected brine identify reaction pathways to be anticipated when supercritical CO2 is injected. Results showed fluctuating chemistries of elements with Ca2+, Mg2+, Na+ and Cl- increasing during the first 15 hours, while Fe, S, and SO42- decrease. For the next 15 hours a reverse trend of the same elements were observed. Alkalinity and pH show inverse relationship throughout the experiment. We conclude that dominant reactions will occur between brine, CO2 and dolomite, calcite, chert, pyrite and argillaceous minerals. There is no perceived threat to freshwater resources in Kansas due to CO2 injection.

The analytical and numerical modeling of CO2 sequestration in deep saline aquifers having different properties was studied with diffusion and convection mechanisms. The complete dissolution of CO2 in the aquifer by diffusion took thousands, even millions of years. In diffusion dominated system, an aquifer with 100 m thickness saturated with CO2 after 10,000,000 years. It was much earlier in convective dominant system. In diffusion process, the dissolution of CO2 in aquifer increased with porosity increase / however, in convection dominant process dissolution of CO2 in aquifer decreased with porosity increase. The increase in permeability accelerated the dissolution of CO2 in aquifer significantly, which was due to increasing velocity. The dissolution process in the aquifer realized faster for the aquifers with lower dispersivity. The results of convective dominant mechanism in aquifers with 1md and 10 md permeability values were so close to that of diffusion dominated system. For the aquifer having permeability higher than 10 md, the convection mechanism began to dominate gradually and it became fully convection dominated system for 50 md and higher permeability values. These results were also verified with calculated Rayleigh number and mixing zone lengths. The mixing zone length increased with increase in porosity and time in diffusion dominated system. However, the mixing zone length decreased with increase in porosity and it increased with increase in dispersivity and permeability higher than 10 md in convection dominated system.

ABSTRACT MODELING OF CARBON DIOXIDE SEQUESTRATION IN A DEEP SALINE AQUIFER BASBUg, BaSar M.S., Department of Petroleum and Natural Gas Engineering Supervisor : Prof. Dr. Fevzi G&uuml / mrah July 2005, 245 pages CO2 is one of the hazardous greenhouse gases causing significant changes in the environment. The sequestering CO2 in a suitable geological medium can be a feasible method to avoid the negative effects of CO2 emissions in the atmosphere. CO2 sequestration is the capture of, separation, and long-term storage of CO2 in underground geological environments. A case study was simulated regarding the CO2 sequestration in a deep saline aquifer. The compositional numerical model (GEM) of the CMG software was used to study the ability of the selected aquifer to accept and retain the large quantities of injected CO2 at supercritical state for long periods of time (200 years). A field-scale model with two injectors and six water producers and a single-well aquifer model cases were studied. In a single-well aquifer model, the effects of parameters such as vertical to horizontal permeability ratio, aquifer pressure, injection rate, and salinity on the sequestration process were examined and the sensitivity analyses were performed after simulating the field-scale model. The supercritical CO2, one-state fluid which exhibits both gas and liquid-like properties, and gaseous CO2 were sequestered in the forms of free CO2 bubble, dissolved CO2 in brine and precipitated CO2 with calcite mineral in a deep saline aquifer. The isothermal condition was assumed during injection and sequestration processes. The change in porosity and permeability values that might have occurred due to mineralization and CO2 adsorption on rock were not considered in this study. Vertical to horizontal permeability ratio and initial pressure conditions were the most dominating parameters affecting the CO2 saturation in each layer of the aquifer whereas CO2 injection rate influenced CO2 saturation in middle and bottom layers since CO2 was injected through bottom layer.

Storage of freshwater in saline aquifers has a strategic importance in water deficit countries. The freshwater stored in these aquifers may be the only source of water available during times of crisis. Coupled simulation and optimization type groundwater management models have been developed that will achieve the optimal control of the storage of freshwater in a stagnant manner for constant density and variable density flows in hypothetical single- and multi-layered saline aquifers. The study is carried out in two stages. In the first stage, a transient model of five years is simulated that allows sufficient time for the freshwater mound to be created. In the second stage, an optimization model is formulated which minimizes the pumping/injection rates of a set of hydraulic gradient control wells subject to a set of constraints consisting of systems response equations, demand requirements, hydraulic gradient controls, pumping and injection limitations. The optimization models select which wells to be pumped and which ones to be injected and decide on their pumping/injection schedules to maintain the freshwater mound from migration. The results of the optimization models showed that the mound is successfully contained in its original location by controlling the hydraulic gradient via pumping/injection wells.

The aim of this project was to study the leakage of CO2 in a Geological Carbon Sequestration (GCS) system. To define the GCS system, a tool that is known as an FEP database was used. FEPs are the features, processes and events that develop scenarios for the goal of the study. Combinations of these FEPs can produce thousands of scenarios. However, among all of these scenarios, some are more important than others for leakage. The FEPs that were used as scenario developers were the formation of the liquid flow, the salinity of the formation liquid, diffusion as a process for gas bubble transport and the depth of the reservoir layer. In this study, the leakage path is considered as the presence of a fracture in sealed caprock. The fractures can be modeled using various approaches. Here, I represented the influence of fracture modeling by applying the Equivalent Continuum Method (ECM) and the Dual-Porosity and Multi-continuum methods to leakage. This study suggests that considering groundwater in the aquifer would reduce the leakage of CO2 and that a shallower formation leads to higher leakage. This study can be expanded to future studies by including external FEPs that are related to the FEPs that were used in this study.

In a context of international reduction of greenhouse gases emissions, CCS (ce{CO2} Capture and Storage) appears as a particularly interesting midterm solution. Indeed, geological storage capacities may raise to several millions of tons of ce{CO2} injected per year, allowing to reduce substantially the atmospheric emissions of this gas. One of the most interesting targets for the development of this solution are the deep saline aquifers. These aquifers are geological formations containing brine whose salinity is often higher than sea water's, making it unsuitable for human consumption. However, this solution has to cope with numerous technical issues, and in particular, the precipitation of salt initially dissolved in the aquifer brine. Consequences of this precipitation are multiple, but the most important is the modification of the injectivity i.e. the injection capacity. Knowledge of the influence of the precipitation on the injectivity is particularly important for both the storage efficiency and the storage security and durability. The aim of this PhD work is to compare the relative importance of negative (clogging) and positive (fracturing) phenomena following ce{CO2} injection and salt precipitation. Because of the numerous simulations and modelling results in the literature describing the clogging of the porosity, it has been decided to focus on the mechanical effects of the salt crystallization and the possible deformation of the host rock. A macroscopic and microscopic modelling has then been developed, taking into account two possible modes of evaporation induced by the spatial distribution of residual water, in order to predict the behavior of a porous material subjected to the drying by carbon dioxide injection. Results show that crystallization pressure created by the growth of a crystal in a confined medium can reach values susceptible to locally exceed the mechanic resistance of the host rock, highlighting the importance of these phenomena in the global mechanical behavior of the aquifer. At the experimental level, the study of a rock core submitted to the injection of supercritical carbon dioxide has been proceeded on a new reactive percolation prototype in order to obtain the evolution of permeabilities in conditions similar to these of a deep saline aquifer

The demand for large scale storage of carbon dioxide (CO2) grows stronger as incentives to reduce greenhouse gas emissions are introduced. Geological storage sites such as depleted oil and gas reservoirs, unminable coal seams and deep saline water-saturated aquifers are a few of many possible geological storage sites. Geological formations offer large scale storage potential, hidden locations and are naturally occurring world wide. A disadvantage is the difficulty to investigate the properties of storage material over large areas. Reservoir simulation studies addressing issues of heterogeneous reservoirs are growing in number. There is still much to investigate however this study adds to the field by investigating the significance of the heterogeneity in hydraulic conductivity based on core sample data. The data was received from the main CO2 injection site Heletz, Israel in the European Union Seventh Framework Programme for research and technological development (EU FP7) project MUSTANG (CO2MUSTANG, 2011-03-13). By developing models using iTOUGH2/ECO2N, the aim of this study is to contribute to a better understanding of how the average permeability, variance in permeability and spatial correlation of the reservoir properties affect the distribution of CO2 within the deep saline aquifer target layer. In this study a stochastic simulation approach known as the Monte Carlo method is applied. Based on core sample data, geostatistical properties of the data are determined and utilized to create equally probable realizations where properties are described through a probability distribution described by a mean and variance as well as a constructed semivariogram. The results suggest that deep saline aquifers are less storage effective for higher values of average permeability, variance in permeability and spatial correlation. The results also indicate that the Heletz aquifer, with its highly heterogeneous characteristics, in some extreme cases can be just as storage effective as a deep saline aquifer ten times as permeable consisting of homogeneous sandstone. / Incitament för minskningar av växthusgaser har på senare tid ökat efterfrågan för storskalig lagring av koldioxid (CO2). Geologiska lagringsplatser som exploaterade olje- och gasreservoarer, svårutvunna kollager och djupt belägna salina akvifärer är exempel på potentiella lagringsplatser. Sådana geologiska formationer erbjuder storskalig lagring, dold förvaring och är naturligt förekommande världen över. Dock finns det stora svårigheter i att undersöka de materiella egenskaperna för hela lagringsområden. Simuleringsstudier som hantera frågor gällande reservoarers heterogenitet växer i antal. Det finns fortfarande mycket kvar att undersöka och denna studie bidrar till detta forskningsområde genom att undersöka betydelsen av heterogenitet i hydraulisk konduktivitet för spridningen av koldioxid med hjälp av uppmätt brunnsdata. Data erhölls från lagringsplatsen Heletz i Israel som är den huvudsakliga lagringplatsen i projektet MUSTANG är en del av den Europeiska Unionens sjunde ramprogram för forskning och teknisk utveckling (EU FP7), (CO2MUSTANG, 2011/3/13). Genom att utveckla modeller med hjälp av programvaran iTOUGH2/ECO2N är syftet med denna studie att bidra till en bättre förståelse för hur den genomsnittliga permeabilitet, varians i permeabilitet samt rumslig korrelation av reservoaregenskaper påverkar fördelningen av CO2 i den djupa saltvattenakvifären Heletz. Denna studie använde sig av stokastisk simulering genom att tillämpa Monte Carlo-metoden. Med hjälp av tidigare uppmätt brunnsdata kunde geostatistiska egenskaper bestämmas för att skapa ekvivalent sannolika realiseringar. De geostatistiska egenskaperna beskrevs med en sannolikhetsfördelning genom medelvärde och varians samt ett konstruerat semivariogram. Resultaten tyder på att djupa saltvattenakvifärer är mindre lagringseffektiva vid högre värden av genomsnittlig permeabilitet, varians i permeabilitet och rumslig horisontell korrelation. Resultaten visar även att Heletz akvifär, med dess mycket heterogena egenskaper, i extrema fall kan vara lika lagringsineffektiv som en djupt belägen saltvattenakvifär med tio gånger högre genomsnittlig permeabilitet.

Many geoscientists endorse Carbon Capture and Storage (CCS) as a potential strategy for mitigating emissions of greenhouse gases. Deep saline aquifers have been reported to have larger CO 2 storage capacity than other formation types because of their availability worldwide and less competitive usage. This work proposes an analytical model for screening potential CO 2 storage sites and investigates injection strategies that can be employed to enhance CO 2 storage. The analytical model provides of estimates CO 2 storage efficiency, formation pressure profiles, and CO 2 –brine interface location. The results from the analytical model were compared to those from a sophisticated and reliable numerical model (TOUGH 2 ). The models showed excellent agreement when input conditions applied in both were similar. Results from sensitivity studies indicate that the agreement between the analytical model and TOUGH2 strongly depends on irreducible brine saturation, gravity and on the relationship between relative permeability and brine saturation. A series of numerical experiments have been conducted to study the pros and cons of different injection strategies for CO 2 storage in confined saline aquifers. Vertical, horizontal, and joint vertical and horizontal injection wells were considered. Simulations results show that horizontal wells could be utilized to improve CO 2 storage capacity and efficiency in confined aquifers under pressure-limited conditions with relative permeability ratios greater than or equal to 0:01. In addition, joint wells are more efficient than single vertical wells and less efficient than single horizontal wells for CO 2 storage in anisotropic aquifers.