This thesis reports a passive method for Fermi level regulation in quantum dot assemblies through ground state transfer between QDs. Here, ZnTe/CdS, and PbSe/CdSe core/shell QDs were used as valence band electron donors, while Cu containing CdS or ZnSe acts as electron acceptor QDs. Prior to study of ground state charge transfer process, this report discusses the synthesis of ZnTe/CdS, and PbSe/CdSe core shell QDs, which are later used to study charge transfer. Since ZnTe QDs are unstable and prone to oxidation, a CdS coated ZnTe QDs were used. Growing a CdS shell on ZnTe core is difficult because high reduction potential of Te. To overcome this problem, partially reduced sulphur is used for the synthesis of ZnTe/CdS. The peculiar optical properties exhibited by ZnTe/CdS also have been discussed. Even though the synthesis of Lead chalcogenide nanoparticles has been investigated previously, certain inconsistencies between the behavior expected from known mechanisms and empirical observations. An anion exchange mechanism is proposed and demonstrated to be involved in PbSe formation. Both ZnTe and PbSe based QDs are extensively used to study hole injection and copper containing QDs were used as acceptors. The charge transfer has been studied using optical spectroscopy. The structure and composition of the assemblies was identified using powder crystallography, electron-microscopy and composition analysis. The unique physical and chemical properties of these materials are exciting both fundamentally as well as from the point of view of applications.

The motivation of this thesis is to understand the physical properties of semiconductor quantum dots (QDs) and to get insight on the basic physics of charge separation in composites made from QDs with graphene oxide (GO)/organic semiconductors. The flexion phonon interactions is one of fundamental issues in solid state physics, which has a significant effect on both electrical and optical properties of solid state materials. This thesis investigates the physical properties of aqueous grown QDs through exciton-phonon coupling and non-radiative relaxation of excited carriers which have been carried out by temperature dependent photoluminescence spectroscopy. Several e orts have been made in order to understand the basic physics of photo induced charge separation in the hybrid systems made from QDs with graphene oxide and organic semiconductors. Investigations on the photoconductivity of the devices made from these hybrid composites have been carried out keeping the motive of its application in nanotechnology. This thesis work is presented in six chapters inclusive of summary and directions for future work. Chapter 1 discusses the background knowledge and information of the general properties of semiconductor nanostructures, QDs and their hybrid nanocomposites. Chapter 2 deals with the sample preparation and experimental techniques used in this thesis. Chapter 3 elaborates the exciton-phonon scattering and nonradiative relaxations of excited carriers in visible emitting cadmium telluride QDs with help of temperature and size dependent photoluminescence. Chapter 4 presents the investigations on time resolved photoluminescence dynamics and temperature dependent photoluminescence properties of near infrared (NIR) emitting mercury cadmium telluride (CdHgTe). Chapter 5 discusses the importance of NIR emitting silver sulphide (Ag2S) QDs and gives insight of nonradiative recombinations through defect/trap states. Chapter 6 investigates the excited state interactions between CdHgTe QDs and GO. Chapter 7 focuses on the understanding of basic physics of charge separation/transfer between poly (3hexylthiophene) and Ag2S QDs. Chapter 1: Semiconductor nanostructures have attracted significant scientific attention due to their fundamental physical properties and technological interests. Quasi zero dimensional nanocrystals or quantum dots (QDs) have shown unique optical and electrical properties compared to its bulk counterpart. These QDs show discrete energy levels due to the quantum confinement effect hence known as arti cial atoms. Large surface to volume ratio in these QDs is expected to play a crucial role in determing the photo-physical properties. Temperature dependent photoluminescence is a powerful tool for understanding the role of the large surface area on exciton recombination process in QDs. Inorganic QDs combined with different materials like graphene oxide or organic semiconductors forms an exciting class of synthetic materials which integrates the properties of organic and inorganic semiconductors. It is quite important to understand the basic physics of electronic interactions in these composites for its future application in many elds. Chapter 2: Synthesis of the inorganic QDs, graphene oxide, composites and fabrication of devices is an important and integral part of this thesis. Hydrothermal and three necked ask technique is adopted to get highly dispersible colloidal quantum dots in solvents. Synthesis of graphene oxide from graphite through oxidation and ultrasonication has been carried out to obtain homogenous dispersed graphene oxide in water. Structural properties have been studied by techniques like X ray diffraction, Raman spectroscopy, X ray photoelectron spectroscopy and high resolution transmission electron microscopy. Morphological properties are studied by atomic force microscopy and transmission electron microscopy. Optical properties are investigated by absorption spectroscopy, steady state and time resolved photoluminescence spectroscopy. Photoconductivity characteristics are analyzed to understand the basics of enhanced current in the various devices made from QDs composites. Chapter 3:Investigations on exciton phonon coupling and nonradiative relaxations in various sizes of visible light emitting cadmium telluride (CdTe) QDs size have been presented. Due to the large surface area, QDs are prone to have defect/trap states which can affect the exciton relaxation. Hence, understanding the role of such defect/trap states on photoluminescence is very essential for achieving the optimum optical properties. Temperature dependent (15 300 K) photoluminescence has been used to understand nonradiative relaxation of excited carriers. Thermally activated processes and multiple phonons scattering is thoroughly investigated to understand the quenching of photoluminescence with temperature. The strength of exciton-phonon coupling is investigated which determines the variation in energy bandgap of QDs with temperature. Role of exciton phonon scattering is also discussed to understand the basic physics of photoluminescence line width broadening in QDs. Chapter 4 and 5: This part of thesis focuses on the size and temperature pho-toluminescence properties of near infra red emitting ternary alloyed CdHgTe and Ag2S QDs. Near infrared emitting semiconductor quantum dots (QDs) have attracted significant scientific and technological interests due to their potential applications in the fields of photosensor, solar energy harvesting cells, telecommunication and biological tissue imaging etc. Structural and photophysical properties of CdHgTe QDs have been analyzed by high resolution transmission electron microscopy, X rayphotoelectron microscopy, photoluminescence decay kinetics and low temperature photoluminescence. Investigations on the nonradiative recombinations through trap/defects states and exciton phonon coupling are carried out in colloidal Ag 2S QDs which emits in the range of 1065 1260 nm. Particularly, the photoluminescence quenching mechanism with increasing temperature is analyzed in the presence of multiple nonradiative relaxation channels, where the excited carriers are thermally stimulated to the surface defect/trap states of QDs. Chapter 6 and 7: The aim of these chapters is to understand the basic physics of photo induced charge separation in the hybrid systems made from the inorganic QDs with graphene oxide and organic semiconductors. In chapter 6, CdHgTe QDs are decorated on graphene oxide sheets through physisorption. The excited state electronic interactions have been studied by optical and electrical characterizations in these CdHgTe QDs GO hybrid systems. In chapter 7, investigations are carried out for understanding the basic physics of charge separation in the composites of Ag2S QDs and poly (3hexylthiophene 2,5 diyl)(P3HT). These composites of inorganic organic materials are made by simple mixing with help of ultrasonication technique. Steady state and time resolved photoluminescence measurements are used as powerful technique to gain insight of energy/charge transfer process between P3HT and Ag2S QDs. Furthermore, investigations have been carried out on the photoconductivity of the devices made from these hybrid composites keeping the motive of its application in nanotechnology. Chapter 8: The conclusions of the work presented in this thesis are coherently summarized in this chapter. Thoughts and prospective for future directions are also summed up.

This thesis reports the successful rational design of three highly active photocatalytic semiconductor nanocrystal (SNC) systems by exploiting morphology effects and the electronic properties of type II semiconductor heterojunctions. Novel architectures of colloidal SNCs are produced with the aim of suppressing exciton recombination and improving charge extraction for the successful initiation of desirable redox chemistry. Rod-shaped niobium pentoxide Nb₂O₅ nanocrystals (NCs) are shown to exhibit significantly enhanced activity (10-fold increase in rate constant) relative to spherical-shaped NCs of the same material. The increase is attributed to Nb5⁺ Lewis acid site rich (001) surfaces, present in higher proportions in the rod morphology, which bind organic substrates from solution resulting in direct interaction with photogenerated charges on the surface of the NC. Building on the insights into morphology-activity dependence, type II semiconductor heterojunctions are exploited for their ability to increase exciton lifetimes and spatially separate charges. Two novel II-VI heterostructured semiconductor nanocrystals (HSNCs) systems are investigated: a series of CdX/ZnO (X = S, Se, Te) HSNCs and ZnS/ZnO HSNCs capped with two different surface ligands. In the first case, substantial photocatalytic activity improvement is observed for HSNCs (relative to pure ZnO analogues) according to the following trend: CdTe/ZnO > CdS/ZnO > CdSe/ZnO. The observed trend is explained in terms of heterojunction structure and fundamental chalcogenide chemistry. In the second case, both ZnS/ZnO HSNCs exhibit activity enhancement over analogous pure ZnO, but the degree of enhancement is found to be a function of surface ligand chemistry. Photocatalytic activity testing of all the materials investigated in this work is performed via the photodecomposition of methylene blue dye in aerated aqueous conditions under UVA (350 nm) irradiation. The synthetic techniques employed for the synthesis of colloidal SNCs investigated in this thesis range from chemical precipitation and solvothermal techniques to several different organometallic approaches. A wide variety of analytical techniques are employed for the chemical, structural and optical characterisation of SNC photocatalysts including: XRD, XPS, TEM, UV-vis absorption, PL spectroscopy and FTIR. Atom Probe Tomography (APT) is employed for the first time in the structural characterisation of II-VI heterojunctions in colloidal HSNCs. Overall, this thesis provides a useful contribution to the growing body of knowledge pertaining to the enhancement of photocatalytic SNCs for useful applications including: solar energy conversion to chemical fuels, the photodecomposition of pollutants and light-driven synthetic chemistry.

>Magister Scientiae - MSc / In this study PbSe quantum dots (QDs) were successfully synthesized via the organometallic and aqueous routes. Optical characterization was carried out using photoluminescence (PL) spectroscopy, structural and morphological characterization were carried out using X-ray diffraction (XRD) and transmission electron microscopy (TEM). Energy-dispersive X-ray spectroscopy (EDS) was used to determine the composition of the QDs. All the synthesized QDs were found to have emissions within the near-infrared region of the spectrum (≥1000 nm) with most of them being less than 5 nm in size. The aqueous synthesized QDs had a perfect Gaussian emission spectrum with a FWHM of ~23 nm indicating pure band gap emission and narrow size distribution respectively. The QDs were determined to have a cubic rock-salt crystal structure consistent with bulk PbSe. The aqueous synthesized QDs were however not stable in solution with the QDs precipitating after approximately 48 h. The organometallic synthesized QDs were transferred into the aqueous phase by exchanging the surface oleic acid ligands with 11-mercaptoundecanoic acid ligands. The ligand exchanged QDs were however stable in solution for over two weeks. The effects of reaction parameters on the optical and structural properties of the organometallic synthesized QDs were investigated by varying the reaction time, temperature, ligand purity, lead and selenium sources. It was observed that larger QDs were formed with longer reaction times, with reactions proceeding faster at higher reaction temperatures than at lower temperatures. Varying the ligand purity was found to have minimal effects on the properties of the synthesized QDs. The lead and selenium sources contributed largely to the properties of the QDs with lead oxide producing spherical QDs which were smaller compared to the cubic QDs produced from lead acetate. TBPSe was seen to produce smaller QDs as compared to TOPSe. The cytotoxity of the synthesized QDs was determined following the WST-1 cell viability assay with the QDs being found to be non-toxic at all the tested concentrations

[pt] Recentemente, os nanocristais semicondutores, também conhecidos como pontos quânticos, tornaram-se muito atrativos em abordagens de detecção por fotoluminescência devido as suas propriedades ópticas peculiares, tais como fluorescência intensa e com perfil estreito, comprimento de onda máximo ajustável através do controle do tamanho das partículas e maior fotoestabilidade em comparação com os corantes orgânicos convencionais. As nanopartículas sintetizadas foram avaliadas como sondas fotoluminescentes (na forma de dispersão aquosa) para a determinação de captopril, histamina, canamicina e tiroxina (analitos não fotoluminescentes na temperatura ambiente) evitando o uso de procedimentos complexos de derivatização química e permitindo quantificações de forma simples e com sensibilidade. Nanopartículas de CdTe modificadas com o ácido tioglicólico (TGA) e com o ácido 2-mercaptopropiônico (2MPA) e também nanopartículas de ZnS modificadas com L-cisteína foram sintetizadas pela abordagem em fase aquosa coloidal. Estas foram caracterizadas usando métodos microscópicos e espectroscópicos adequados. A fotoluminescência da nanopartícula 2MPA-CdTe foi consideravelmente mais intensa quando na presença de captropil. Sob condições ótimas, o modelo de calibração (isoterma de ligação de Langmuir) foi linear até 4,8 x 10-4 mol L-1 com constante de equilíbrio de ligação de 3,2 x 104 L mol-1 e limite de detecção (LOD) de 6,2 x 10-6 mol L-1 (1,3 (micro)g mL-1). Aplicações em soro sanguíneo humano fortificado com captropil e em formulações farmacêuticas foram demonstradas. A fotoluminescência das nanopartículas de TGA-CdTe foi reduzida (supressão) após adição de diferentes concentrações de histamina seguindo o modelo de Stern- Volmer. A resposta linear cobriu uma faixa de concentração até 5,7 x 10-4 mol L-1, com LOD de 9,6 x 10-6 mol L-1 (1,1 (micro)g mL-1). A abordagem proposta foi utilizada para determinação de histamina em carne de atum. Já a presença de aminoglicosídeos aumentou a fluorescência das nanopartículas de TGA-CdTe (seguindo o modelo da isoterma da adsorção de Langmuir). A kanamicina foi o aminoglicosídeo escolhido para estudar o efeito do aumento da intensidade da fotoluminescência das nanopartículas de TGA-CdTe disperso em solução aquosa. A faixa linear estendeu-se até 8,2 x 10-7 mol L-1 com LOD de 2,5 x 10-8 mol L-1 (14,2 ng mL-1). As constantes de ligação entre diversos aminoglicosídeos e TGACdTe foram calculadas e indicou que existe uma relação entre o número de grupos amino primários disponíveis e o aumento da luminescência. Essa abordagem foi aplicada com sucesso para a análise de amostras de leite e água de riacho, ambos fortificados com kanamicina, usando procedimento de extração em fase sólida com um polímero impresso molecularmente (MIP). A intensidade da fotoluminescência da nanopartícula cisteína-ZnS em solução contendo brometo de cetiltrimetilamônio (CTAB) foi reduzida (quenched) após adição de tiroxina. A redução total do sinal (quenching) seguiu o modelo de Stern-Volmer com resposta linear até 4,0 x 10-6 mol L-1 de concentração do analito, o LOD foi 6,2 x 10-8 mol L-1 (48,3 ng mL-1). A dispersão aquosa da cisteína-ZnS foi usada como sonda óptica para a determinação de tiroxina em formulações farmacêuticas e em saliva humana fortificada com analito. / [en] Recently, semiconductor nanocrystals, also known as quantum dots, have become very attractive for photoluminescence based sensing approaches due to their unique optical properties like intense photoluminescence with narrow profile, maximum wavelength adjustable by the control of particle size and higher photostability in comparison of conventional organic dyes. Different synthesized nanoparticles were evaluated as photoluminescent probes (as aqueous dispersions) for the determination of captopril, histamine, kanamycin and thyroxine (nonphotoluminescent analytes at room-temperature) avoiding the use of complex chemical derivatization procedures and enabling simple and sensitive quantifications. Thioglycolic acid (TGA) and 2-mercapoprionic acid (2MPA) modified CdTe nanoparticles and L-cysteine modified ZnS nanoparticles were synthesized via the colloid aqueous phase route. Their characterization was made using proper microscopic and spectroscopic methods. The emission intensity of 2MPA-Cdte is greatly enhanced in the presence of captopril. Under optimum conditions, the calibration model (Langmuir binding isotherm) was linear up to 4.8 x 10-4 mol L-1 with equilibrium binding constant of 3.2 x 104 L mol-1 and limit of detection (LOD) of 6.2 x 10-6 mol L-1 (1.3 (micro)g mL-1). Applications in captopril fortified human serum and in pharmaceutical formulations were demonstrated. The photoluminescence of TGA-CdTe nanoparticles was quenched by histamine in a concentration dependent manner (Stern-Volmer model). The linear response covered the concentration range up to 5.7 x 10-4 mol L-1 with LOD of 9.6 x 10-6 mol L-1 (1.1 (micro)g mL-1). The proposed method was used for the analysis of tuna fish. The presence of aminoglycosides enhanced the photoluminescence of the TGA-CdTe nanoparticles (following a Langmuir binding isotherm model). Kanamycin was used as a model aminoglycoside in order to study its effect on the photoluminescence enhancement of TGA-CdTe quantum dots dispersed in aqueous solution. The linear range extended up to 8.2 x 10-7 mol L-1 with LOD of 2.5 x 10-8 mol L-1 (14.2 ng mL-1). Binding constants were calculated for several aminoglycosides indicating that there is a relationship between the number of available primary amino groups and the increasing in photoluminescence. This approach was successfully applied for determination of kanamycin fortified milk and in stream water samples after solid phase extraction using a molecular imprinted polymer produced using a kanamycin template. The photoluminescence intensity of cysteine-ZnS in solution containing cetyltrimethyl ammonium bromide (CTAB) was quenched by thyroxine. The overall quenching followed a Stern-Volmer model with linear response coveing an analyte concentration range up to 4.0 x 10-6 mol L-1. LOD was 6.2 x 10-8 mol L-1 (48.3 ng mL-1). The aqueous dispersion of cysteine-ZnS was used as optical probe for the determination of thyroxine in pharmaceutical formulations and in analyte fortified human saliva.

We developed a three-step colloidal synthesis of near-infrared active Cu-In-Se (CISe)/ZnS core/shell nanocrystals (NCs) via a sequential partial cation exchange. In the first step binary highly copper deficient Cu2‒xSe NCs were synthesized, followed by a partial cation exchange of copper to indium ions yielding CISe NCs. In order to enhance the stability and the photoluminescence (PL) properties of the NCs, a subsequent ZnS shell was grown, resulting in CISe/ZnS core/shell NCs. These core/shell hetero-NCs exhibited a dramatic increase in size and a restructuring to trigonal pyramidal particles. The reaction parameters, e.g. the Cu:Se-ratio, the temperature and the time were carefully tuned enabling a distinct control over the size and the composition of the NCs. By varying only the size of the CISe/ZnS NCs (from 9 to 18 nm) the PL spectra could be tuned covering a wide range with maxima from 990 nm to 1210 nm. Thus, in these experiments we demonstrate a clear dependence of the optical properties of these materials on their size and extend the PL range of CISe-based nanoparticles further to the infrared part of the spectrum. Furthermore, the relatively large size of these NCs allows their detailed structural analysis via electron microscopy techniques, which is particularly challenging in the case of small particles and especially important to relate the size, composition and crystal structure to their optoelectronic properties.

In dieser Arbeit wird die Abhängigkeit der Photolumineszenz (PL) von CdSe/ZnS-Nanokristallen von der Umgebung und der Einfluss der Filmdicke und -morphologie auf die optische Absorption von Farbstofffilmen untersucht sowie die Oberfläche von Hybridstrukturen durch Funktionalisierung mit Farbstoff analysiert. Untersuchungen von CdSe/ZnS-Nanokristallen in Toluol-Lösung zeigen, dass die PL-Intensität der Nanopartikel durch Zugabe des organischen Halbleiters TPD gequencht wird. Die zusätzliche Auswertung der PL-Lebensdauer verdeutlicht, dass die Abnahme (fast) vollständig durch statisches Quenchen, infolge der Abnahme der Anzahl der mittierenden Nanokristalle verursacht wird, bei einem Anstieg der langlebigsten Lebensdauerkomponente. Die Analyse der PL-Unterbrechung einzelner Nanokristalle auf PVA und Siliziumoxid sowie eingebettet in PS und TPD zeigt eine Ab- bzw. Zunahme der Häufigkeit langer An- bzw. Aus-Zeiten und somit eine deutliche Abhängigkeit der PL-Unterbrechung von den dielektrischen Eigenschaften der Umgebung. Bei Variation der Anregungsleistung zeigt sich für einzelne Nanokristalle auf Siliziumoxid und eingebettet in TPD eine lineare Zunahme der Blinkaktivität und eine Abnahme des An-Zeit-Anteils. Die Änderung der Verteilungen der An- und Aus-Zeiten zeigen eine deutliche Abhängigkeit von der Matrix. Die Untersuchung der optischen Absorption von aufgedampften MePTCDI- und Cl4MePTCDI-Filmen zeigt eine Verschiebung des energieärmsten optischen Überganges mit wachsender mittlere Filmdicke. Es wird ein (geometrisches) Schicht-Modell vorgestellt, das die energetische Verschiebung mit der mittleren Filmdicke korreliert und dabei die kristalline, nadelförmige Morphologie von MePTCDIFilmen und die amorphe Kugelkappen-Struktur von Cl4MePTCDI-Filmen berücksichtigt. Die Oberfläche von Hybridfilmen aus PMMA mit Siliziumoxid-Partikeln wird durch Anbindung von R6G an die Oxid-Partikel gezielt funktionalisiert. Die Ergebnisse von fluoreszenzmikroskopischen Untersuchungen zeigen, dass dadurch der Anteil der freien Oxid-Oberfläche bestimmt werden kann.

Chapter 1. General Introduction This chapter gives an introduction to supramolecular organo/hydrogels and the related bile acid chemistry touching upon the gelation properties of the bile acid derivatives. Diverse applications of the supramolecular gels are illustrated with several examples. In the concluding section of this chapter, a brief introduction on the semiconductor nanocrystals is provided. Finally, the content of the thesis is outlined. Chapter 2. Bile Acid Derived Novel Organo/hydrogelators Part 1. Bile Acid Derived Organo/hydrogelators With a Basic Side Chain Cationic analogues of bile acids which showed remarkable gelation properties in water were reported from our laboratory. This led us to investigate the aggregation behaviour of some of the lithocholic and deoxycholic acid derivatives having a basic side-chain. Figure 1. Bile acid based organo/hydrogelators containing a basic side-chain. In this part, an organogelator 1 and a hydrogelator 2 derived from parent bile acids have been described with respect to their gelation properties, morphology, thermal and mechanical stability of the gels. The organo/hydrogels were shown to be responsive to acid-base stimuli as the organogel formed only in the protonated state and the hydrogel formed in the neutral form of the tertiary amines. The xerogel fibres obtained from the organogel were found to be solid-like and stable up to 200 oC as confirmed by variable temperature polarizing optical microscopy. The non-fluorescent organogel was doped with a fluorescent dye (coumarin 153) to design a novel dye-organogel composite material which was investigated with laser scanning confocal fluorescence microscopy showing the dye molecules were uniformly deposited on the organogel fibres. Part 2. Serendipitous Organogelation by Dimeric Bile Acid Esters This section highlights our work on the organogelators based on a number of dimeric esters consisting of different bile acid units. Figure 2. The three different dimeric bile acid esters as organogelators. In this part, three bile acid derived dimeric esters (1, 2 and 3) were shown to possess organogelation properties in aromatic and halogenated aromatic solvents. We studied the morphological features and rheological properties of these organogels. Next, the organogel matrix was exploited to generate and stabilize gold nanoparticles and prepare AuNP/gel hybrid material. Chapter 3. Cholate Hydrogels and Soft Gel-nanoparticle Hybrid Materials Sodium cholate does not form gel in water under any condition as compared to other sodium salts of other bile acids such as sodium deoxycholate and lithocholate which show pH-dependent gelation behaviour. Figure 3. Metal cholate hydrogels derived from sodium cholate and a variety of metal ions. In this chapter, super hydrogelation of sodium cholate induced by a variety of metal ions (Ca2+, Cu2+, Co2+, Zn2+, Cd2+, Hg2+ and Ag+) is highlighted with respect to their morphology and mechanical strength/stability. The calcium cholate supramolecular system showed the presence of helically twisted nanofibres which were utilised in the synthesis of soft hybrid materials containing metal (Au and Ag) and metal sulphide (CdS, ZnS, HgS, etc.) nanoparticles. Chapter 4. Cadmium Deoxycholate and Highly Luminescent CdSe Nanocrystals Bile acid derivatives have very high chemical and thermal stability owing to the presence of a rigid steroidal nucleus. We explored the possibility of utilizing the bile salt derived from Cd as a metal complexes as precursor to high quality nanocrystals (NCs) which can only be accessed at high temperatures (>200 oC). Figure 4. Synthesis of high quality CdSe NCs from cadmium deoxycholate. In this chapter, the synthesis of high quality CdSe nanocrystals is discussed using a novel bile acid based precursor: cadmium salt of 7-deoxycholic acid, which has high thermal stability and can be conveniently used at very high temperatures (>300 oC) required for the synthesis of high quality nanocrystals. Syntheses were done both by ‘injection’ and ‘non-injection’ modes. The as-prepared nanocrystals have high photoluminescence quantum yield, multiple excitons, narrow size-distributions and zinc blende/wurtzite crystalline cores. Appendix. Steroidal Thiols in Design of Novel Quantum dot (QD)/Gel Hybrid Materials Bile acid derived steroidal thiols were reported to be efficient capping agents for silver and gold nanoparticles from our laboratory. So, we wanted to check whether they could stabilize the semiconductor nanocrystals as well. Figure 5. Steroidal thiols as stabilizers of semiconductor quantum dots. In this short report, we describe the efficient capping by bile acid derived thiols of group II-VI semiconductor nanocrystals/quantum dots (QDs) (CdS, CdSe). After synthesizing the thiol capped QDs, we tried to disperse the capped nanoparticles into the gel fibres. The hybrid gels showed the presence of nanoparticles inside the fibres as observed by transmission electron microscopy, although the photoluminescence of the QDs was very low in the gel matrix, which might be due to the inefficient surface passivation of the nanoparticles in the gel.

We introduce new oxygen- and moisture-proof polymer matrixes based on polyisobutylene (PIB) and its block copolymer with styrene [poly(styrene-block-isobutylene-blockstyrene), PSt-b-PIB-b-PSt] for the encapsulation of colloidal semiconductor nanocrystals. In order to prepare transparent and processable composites, we developed a special procedure of nanocrystal surface engineering including ligand exchange of parental organic ligands to inorganic species followed by the attachment of specially designed short-chain PIB functionalized with an amino group. The latter provides excellent compatibility of the particles with the polymer matrixes. As colloidal nanocrystals, we chose CdSe nanoplatelets (NPLs) because they possess a large surface and thus are very sensitive to the environment, in particular in terms of their limited photostability. The encapsulation strategy is quite general and can be applied to a wide variety of semiconductor nanocrystals, as demonstrated on the example of PbS quantum dots. All obtained composites exhibited excellent photostability, being tested in a focus of a powerful white-light source, as well as exceptional chemical stability in a strongly acidic media. We compared these properties of the new composites with those of widely used polyacrylate-based materials, demonstrating the superiority of the former. The developed composites are of particular interest for application in optoelectronic devices, such as color-conversion light-emitting diodes, laser diodes, luminescent solar concentrators, etc.

Diese Arbeit untersucht die Photo-Lumineszenz (PL)-Unterbrechung (Blinken) einzelner in Polymer-Nanopartikeln eingebetteter CdSe/CdS Halbleiter-Nanokristalle (Quantenpunkte) im Einfluss elektrischer Gleich- und Wechselfelder mittels Weitfeld-Mikroskopie. Hierbei emittieren die einzelnen Quantenpunkte trotz kontinuierlicher Anregung mit einer zwischen hellen An- und dunklen Aus-Zuständen variierenden PL-Intensität. Die Ergebnisse zeigen, dass die Dynamik dieses Blinkens durch Wechselfelder stark beeinflusst wird und von deren Feldstärke, teilweise auch deren Feldfrequenz abhängt. Für zunehmende Feldstärken lässt sich ein schnellerer Wechsel zwischen An- und Aus-Zuständen (erhöhte Blinkfrequenz) beobachten, der von einer reduzierten Häufigkeit langer An- und Aus-Ereignisse begleitet wird. Der Verlauf der An-Zeit-Verteilungen bei kleinen Zeiten wird zunehmend (monoton) flacher, während die Verteilungen der Aus-Zeiten zunächst ebenfalls einem analogen Trend folgen, ab einer bestimmten und von der Feldfrequenz abhängenden Feldstärke jedoch wieder steiler verlaufen. Ein solcher Monotonie-Wechsel in der Blinkdynamik im Fall einer gleichbleibenden Variation einer äußeren Bedingung wurde bei Halbleiter-Nanokristallen so erstmalig beobachtet. Für Gleichfelder zeigen sich hingegen nahezu keine Auswirkungen. Lediglich die An-Zeit-Verteilungen sowie die Blinkfrequenz im Fall hoher Feldstärken werden modifiziert. Die Ergebnisse werden im Kontext verschiedener aktueller Modelle zur PL-Unterbrechung wie dem trapping-Modell, dem self-trapping-Mechanismus oder dem Modell multipler Rekombinationszentren diskutiert und diese entsprechend erweitert. Dabei stehen die dielektrischen Eigenschaften und die Relaxationsdynamik der lokalen Quantenpunkt-Umgebung im Mittelpunkt, deren Reaktion auf die externen Felder durch eine zeitabhängige Ausrichtung permanenter Dipole beschrieben werden kann.