No projeto desenvolvido, ligações cruzadas foram formadas no polietileno de alta densidade e alto peso molecular, grade HS5103, através dos processos reticulação por peróxidos e silanos, com o objetivo de se avaliar o efeito da introdução de ligações cruzadas nas propriedades térmicas e mecânicas deste PEAD. Misturas entre o HS5103 e os peróxidos orgânicos, 2,5-Dimetil-2,5-di(terc-butilperoxi)hexano (DHBP) e peróxido de dicumila (DCP), foram produzidas e analisadas para a avaliação do efeito dos tipos de peróxido na reticulação e propriedades do PEAD e para determinação da concentração e do tipo de peróxido a ser utilizado como agente iniciador de reticulação por silano. Ensaios de índice de fluidez (MFI), reometria capilar, extração de polímero por xileno (teor de gel), análise termogravimétrica (TGA), calorimetria diferencial de varredura (DSC) e tração foram realizados para caracterização das misturas com peróxidos. Os resultados indicaram aumento da viscosidade com o aumento da concentração de peróxido, sendo o DHBP o que apresentou maior índice de aumento; não houve mudanças relevantes nas propriedades mecânicas e, ocorreu aumento do grau de cristalinidade, sendo mais significativo nas amostras com DCP. Após avaliação dos resultados citados, para as amostras a serem reticuladas via silano, foi promovida a graftização de diferentes concentrações de viniltrimetóxisilano (VTMS) na presença de 0,01%p/p de DCP com a adição de 0,05%p/p de catalisador, posteriormente a reticulação foi promovida em água. As amostras produzidas foram caracterizadas por ensaios de teor de gel, análise dinâmico-mecânica (DMA), espectroscopia de absorção no infravermelho (FTIR), TGA, ensaios de desgaste por deslizamento e tração. Nas amostras com silano a formação de ligações cruzadas foi gradativa, apresentando de 8% de gel para amostra com 0,5%p/p de VTMS a 57 % para amostra com1,5% p/p de silano, maior concentração utilizada. A análise dinâmico-mecânica (DMA) realizada evidenciou que houve um aumento densidade de ligações cruzadas e do módulo de armazenamento após temperatura de fusão com o teor de silano, concordando com os resultados de teor de gel. As análises de FTIR mostraram que houve a graftização e a formação de ligações cruzadas no PEAD HS5103. Não se observou um aumento significativo para o limite de resistência para o PEAD modificado. E os testes de desgaste por deslizamento indicaram um aumento da resistência ao desgaste das amostras reagidas com VTMS. / In the project carried out, crosslinks were formed in high density and high molecular weight polyethylene, grade HS5103, through peroxide and silane reticulation processes, aiming to evaluate the effects of the introduction of crosslinks in thermal and mechanical properties of this PEAD. Mixtures between HS103 and organic peroxides, 2,5-Bis(t-butylperoxy)-2,5-dimethylhexane (DHBP) and dicumyl peroxide (DCP) have been produced and analyzed for the evaluation of the effect of types of peroxide in reticulation and PEAD properties and to determine both concentration and type of the peroxide to be used as silane reticulation initiation agent. Melt flow index (MFI), capillary rheometry, xylem polymer extraction (gel content), thermogravimetric analysis (TGA), differential canning calorimetry (DSC) and traction tests were carried out for peroxide mixtures characterization. The results indicated increase of viscosity with the increase of the concentration of peroxide, being DHBP the one with the highest increase level; there have been no relevant changes concerning mechanical properties and there has been an increase in the crystallinity levels, mostly in DCP samples. After the assessment of the former results, for the samples to be reticulated through silane, graphitization of different concentrations of Vinyltrimethoxysilane (VTMS) was carried out, together with 0.01%p/p of DCP, adding 0.05%p/p of a catalyst; later, reticulation was carried out in water. The samples produced were characterized by gel content tests, dynamic-mechanical analysis (DMA), Fourier transform infrared spectroscopy (FTIR), TGA, sliding and traction wear tests. In the silane samples, formation of crosslinks was gradual, showing 8% of gel to the sample with com 0.5%p/p of VTMS to 57 % to the sample with 1.5% p/p of silane, the highest concentration used. The dynamic-mechanical analysis (DMA) showed an increase of density in crosslinks and storing mode after fusion temperature with silane content, converging with gel content results. FTIR analysis showed there has been graphitization and crosslink formations in PEAD HS5103. A significant increase has not been observed concerning the limit of resistance for the modified PEAD. Besides, sliding wear tests indicated an increase of resistance to the wear of samples reacted to VTMS.

As linhas flexíveis, estruturas compostas por um determinado número de camadas plásticas e de aço, possibilitam o escoamento de fluidos em operações de exploração e produção de hidrocarbonetos entre plataformas marítimas de petróleo e o leito marinho e/ou a costa. E, atualmente, têm sido utilizadas na exploração de hidrocarbonetos em lâminas dágua cada vez maiores. O presente estudo visa modificar quimicamente o LLDPE através de processos de extrusão reativa envolvendo a graftização de VTMS na presença de peróxidos orgânicos, e posterior formação de ligações cruzadas promovida pela água. Visa analisar também o efeito da introdução de ligações cruzadas nas propriedades térmicas e mecânicas do LLDPE. De forma a atingir os objetivos propostos, um planejamento experimental foi realizado para analisar o efeito de variáveis como velocidade de rotação do parafuso da extrusora, tipo e teor de peróxido nos índices de fluidez dos produtos da reação do LLDPE com peróxido de dicumila (DCP) e 2,5-dimetil-peróxi-hexano (Trigonox 101). Essa metodologia também foi utilizada para avaliar o efeito da concentração de silano, da velocidade de rotação do parafuso da extrusora e do procedimento de imersão nos índices de fluidez dos produtos da reação do LLDPE com 0,02% p/p de DCP e concentrações variáveis de silano. As amostras foram caracterizadas através dos ensaios para determinação de índice de fluidez (MFI) e teor de gel, ensaios convencionais de tração e técnicas de análise térmica, TGA e DSC. A técnica de FTIR foi utilizada para verificar a ocorrência das reações de graftização e formação de ligações cruzadas no LLDPE. As amostras reagidas com teores de 0,07% de DCP e 1,0 e 1,5% de silano, respectivamente, apresentaram valores significativos para os teores de gel em ambas as velocidades de rotação (10 e 50rpm). A amostra reagida com 0,07% de DCP e 1,5% de silano, a 10rpm, apresentou um teor de gel de 74,77%. A análise termogravimétrica (TGA) realizada evidenciou que houve um aumento da estabilidade térmica do polímero devido à formação de ligações cruzadas. Não se observou um aumento significativo para o limite de resistência para o LLDPE modificado devido à heterogeneidade dos corpos de prova. As análises de FTIR mostraram que houve a graftização e a formação de ligações cruzadas no LLDPE. / The flexible lines are flexible structures manufactured through plastic and steel layers that allows its use in order to permit fluid flow in exploration and production of hydrocarbon between offshore oil units and sea bed and/or coast. Nowadays these pipes are one of the main ways to permit the exploration of hydrocarbon in deepwater. The present study aims to analyze the LLDPE (Low Density Polyethylene) chemical changing through a reactive extrusion process involving VTMS grafting in presence of organic peroxides. After a crosslinking due to water, an analysis will be carried out in order to assess the PEX (crosslinked polyethylene) application in flexible pipe structures. The crosslinking effect at thermal and mechanical properties will also be studied. An experimental planning was carried out in order to evaluate the effect of variable variations such as the rotational velocity of the single-screw extruder, type and concentration of peroxides at melt flow index of the products originated from the LLDPE-peroxides (DCP and Trigonox 101) reaction, and in order to analyze the silane concentration effect, rotational velocity and immersion procedure at melt flow index in products with LLDPE and contents with DCP variable concentrations of silane. The samples were characterized through tests such as MFI (Melt Flow Index), gel content determination, tensile testing and thermal analyses, DSC (Differential Scanning Calorimetry) and TGA (Thermal Gravimetric Analysis). The Fourier Transformed Infrared Spectroscopy (FTIR) was also used to characterize the samples. The samples content 0,07% of DCP and 1,0 and 1,5% of silane, respectively, showed considerable value for gel contents in both rotational velocities (10 and 50rpm). The sample with 0,07% of DCP and 1,5% of silane, at 10rpm, a value of 74,77% of gel content could be noticed. The thermal analyses carried out showed that an increase of thermal stability for the polymer due to crosslinking generation happened. After tensile testing, a considerable changing in mechanical proprieties of the changed LLDPE was not seen due to the specimens heterogeneity. However through FTIR, silane linking was noticed demonstrating the LLDPE reticulation.

Gegenstand dieser Arbeit war die Untersuchung verschiedener Systeme Chlorosilan / Amin bezüglich deren elektronischer Struktur, Molekülstruktur und Reaktivität. Einen Schwerpunkt bildete dabei die Untersuchung der LEWIS-BASE-katalysierten Disproportionierung unterschiedlich chlorierter Disilane mit elektronenreichen Alkenen, wie Tetrakis-(dimethylamino)-ethylen (TDAE) oder N,N,N’,N’-Tetramethyl-1,4-phenylendiamin (TPDA). Die Alkene sollten auf mögliche Elektronenübertragungsreaktionen, aber auch Chelatbildung mit den eingesetzten Disilanen bzw. intermediär gebildeten Silylenen getestet werden. Ein weiterer Schwerpunkt lag bei der Synthese und Charakterisierung neuer hetero- und homocyclischer Oligosilane. Die erhaltenen Cyclooligosilane wurden auf ihre Donorwirkung gegenüber elektronendefizienten π-Alkenen und eine damit verbundene Charge-Transfer-Komplexbildung untersucht. In die Auswertung wurden auch ab-initio-Berechnungen einbezogen, die mit den experimentellen Ergebnissen (u.a. NMR, IR, Röntgeneinkristallstrukturanalyse) vergleichend diskutiert wurden.

Der Siliciumauflöseprozess in HF-HNO3-H2SO4/H2O-Lösungen unterscheidet sich vom Ätzprozess in HF-HNO3-H2O-Standardmischungen in Bezug auf die Reaktivität gegenüber Silicium, erzielte Oberflächenmorpholgien sowie die beim Ätzen entstehenden gelösten und gasförmigen Produkte. Durch die Behandlung in H2SO4-reichen HF-HNO3-H2SO4/H2O-Lösungen werden auf Siliciumwafern Texturen mit hoher Rauigkeit und geringer Reflexion erzeugt. mc-Si-Solarzellen texturiert durch eine H2SO4-reiche Ätzlösung weisen vergleichend zu Solarzellen mit Standardtexturen höhere Wirkungsgrade auf. In HF-HNO3-H2SO4/H2O-Lösungen mit hohen Schwefelsäurekonzentrationen (c(H2SO4) > c(H2O)) wirkt sowohl das Salpetersäuremolekül HNO3 als auch das Nitrylion NO2+ als Oxidationsmittel. Trifluorsilan HSiF3 und Hexafluordisiloxan F3SiOSiF3 wurden erstmalig als gasförmige Produkte des sauren nasschemischen Ätzens identifiziert. Anhand von Modellreaktionen zur Reaktivität von Nitrylionen wurde deren Reduktionssequenz im Siliciumätzprozess aufgeklärt.

Surface chemistry plays a key role in science and technology because materials interact with their environments through their surfaces. Understanding surface chemistry can help alter/improve the properties of materials. However, surface characterization and modification often require multiple characterization and synthesis techniques. Silicon/silica-based materials are technologically important, so studying their surface properties can enable future advancements. In this dissertation, I explore surface modification and characterization of different types of Si/SiO2 thin films, including silicon wafers, fused silica capillary columns, and oblique angle sputtered Si/SiO2 thin films. In Chapters 2-5, I first present a method to rapidly silanize silica surfaces using a gas-phase synthesis that employs a small aminosilane that passivates/deactivates silicon wafers and the inner surfaces of capillary columns. This deposition takes place in a flow-through, atmospheric pressure, gas-phase reactor. This surface modification results in a significant decrease in the number of free surface silanols, which was confirmed by high-sensitivity low energy ion scattering (HS-LEIS), X-ray photoelectron spectroscopy (XPS), and spectroscopic ellipsometry (SE). I then show that this silanization inhibits atomic layer deposition (ALD) of zinc oxide (ZnO), which is an important optical thin film material. Finally, I performed in-depth characterization of thin films of oblique angle deposited porous Si/SiO2. These films have been used as the active coatings in solid phase microextraction (SPME) devices. The characterization and analysis in this study were mainly by scanning transmission electron microscopy (STEM) and various computational microstructural characterization techniques, e.g., two-point statistics. The rest of my dissertation focuses on XPS data analysis and interpretation. I first show box plots as a simple graphical tool for determining overfitting in XPS peak fitting. I next present a series of chemometrics/informatics analyses of an XPS image dataset from a patterned silicon surface with different oxide thicknesses. This dataset was probed via an initial, graphical analysis of the data, summary statistics with a focus on pattern recognition entropy (PRE), principal component analysis (PCA), multivariate curve resolution (MCR), and cluster analysis (CA).

Progress in chemomechanical functionalization was made by investigating the binding of molecules and surface coverage on the silicon surface, demonstrating functionalization of silicon with gases by chemomechanical means, analyzing atomic force microscopy probe tip wear in atomic force microscopy (AFM) chemomechanical nanografting, combining chemomechanical functionalization and nanografting to pattern silicon with an atomic force microscope, and extending chemomechanical nanografting to silicon dioxide. Molecular mechanics of alkenes and alkynes bound to Si(001)-2x1 as a model of chemomechanically functionalized surfaces indicated that complete coverage is energetically favorable and becomes more favorable for longer chain species. Scribing a silicon surface in the presence of ethylene and acetylene demonstrated chemomechanical functionalization with gaseous reagents, which simplifies sample cleanup and adds a range of reagents to those possible for chemomechanical functionalization. Thermal desorption spectroscopy was performed on chemomechanically functionalized samples and demonstrated the similarity in binding of molecules to the scribed silicon surface and to the common Si(001)-2x1 and Si(111)-7x7 surfaces. The wearing of atomic force microscope probe tips during chemomechanical functionalization was investigated by correlating change over time and force with widths of created lines to illustrate the detrimental effect of tip wear on mechanically-driven nanopatterning methods. In order to have a starting surface more stable than hydrogen-terminated silicon, silicon reacted with 1-octene was used as a starting surface for AFM chemomechanical functionalization, producing chemomechanical nanografting. Chemomechanical nanografting was then demonstrated on silicon dioxide using silane molecules; the initial passivating layer reduced the tip friction on the surface to allow only partial nanografting of the silane molecules. These studies broadened the scope and understanding of chemomechanical functionalization and nanografting.

No description available.

In recent years, due to growing environmental awareness, considerable attention has been given to the development and production of natural fibre reinforced polymer (both thermoset and thermoplastic) composites. The main objective of this study was to reinforce epoxy and polylactic acid (PLA) with hemp fibre to produce improved composites by optimising the fibre treatment methods, composite processing methods, and fibre/matrix interfacial bonding. An investigation was conducted to obtain a suitable fibre alkali treatment method to: (i) remove non-cellulosic fibre components such as lignin (sensitive to ultra violet (UV) radiation) and hemicelluloses (sensitive to moisture) to improve long term composites stability (ii) roughen fibre surface to obtain mechanical interlocking with matrices (iii)expose cellulose hydroxyl groups to obtain hydrogen and covalent bonding with matrices (iv) separate the fibres from their fibre bundles to make the fibre surface available for bonding with matrices (v) retain tensile strength by keeping fibre damage to a minimum level and (vi) increase crystalline cellulose by better packing of cellulose chains to enhance the thermal stability of the fibres. An empirical model was developed for fibre tensile strength (TS) obtained with different treatment conditions (different sodium hydroxide (NaOH) and sodium sulphite (Na2SO3) concentrations, treatment temperatures, and digestion times) by a partial factorial design. Upon analysis of the alkali fibre treatments by single fibre tensile testing (SFTT), scanning electron microscopy (SEM), zeta potential measurements, differential thermal analysis/thermogravimetric analysis (DTA/TGA), wide angle X-ray diffraction (WAXRD), lignin analysis and Fourier transform infrared (FTIR) spectroscopy, a treatment consisting of 5 wt% NaOH and 2 wt% Na2SO3 concentrations, with a treatment temperature of 120oC and a digestion time of 60 minutes, was found to give the best combination of the required properties. This alkali treatment produced fibres with an average TS and Young's modulus (YM) of 463 MPa and 33 GPa respectively. The fibres obtained with the optimised alkali treatment were further treated with acetic anhydride and phenyltrimethoxy silane. However, acetylated and silane treated fibres were not found to give overall performance improvement. Cure kinetics of the neat epoxy (NE) and 40 wt% untreated fibre/epoxy (UTFE) composites were studied and it was found that the addition of fibres into epoxy resin increased the reaction rate and decreased the curing time. An increase in the nucleophilic activity of the amine groups in the presence of fibres is believed to have increased the reaction rate of the fibre/epoxy resin system and hence reduced the activation energies compared to NE. The highest interfacial shear strength (IFSS) value for alkali treated fibre/epoxy (ATFE) samples was 5.2 MPa which was larger than the highest value of 2.7 MPa for UTFE samples supporting that there was a stronger interface between alkali treated fibre and epoxy resin. The best fibre/epoxy bonding was found for an epoxy to curing agent ratio of 1:1 (E1C1) followed by epoxy to curing agent ratios of 1:1.2 (E1C1.2), 1: 0.8 (E1C0.8), and finally for 1:0.6 (E1C0.6). Long and short fibre reinforced epoxy composites were produced with various processing conditions using vacuum bag and compression moulding. A 65 wt% untreated long fibre/epoxy (UTLFE) composite produced by compression moulding at 70oC with a TS of 165 MPa, YM of 17 GPa, flexural strength of 180 MPa, flexural modulus of 10.1 GPa, impact energy (IE) of 14.5 kJ/m2, and fracture toughness (KIc) of 5 MPa.m1/2 was found to be the best in contrast to the trend of increased IFSS for ATFE samples. This is considered to be due to stress concentration as a result of increased fibre/fibre contact with the increased fibre content in the ATFE composites compared to the UTFE composites. Hygrothermal ageing of 65 wt% untreated and alkali treated long and short fibre/epoxy composites (produced by curing at 70oC) showed that long fibre/epoxy composites were more resistant than short fibre/epoxy composites and ATFE composites were more resistant than UTFE composites towards hygrothermal ageing environments as revealed from diffusion coefficients and tensile, flexural, impact, fracture toughness, SEM, TGA, and WAXRD test results. Accelerated ageing of 65 wt% UTLFE and alkali treated long fibre/epoxy (ATLFE) composites (produced by curing at 70oC) showed that ATLFE composites were more resistant than UTLFE composites towards hygrothermal ageing environments as revealed from tensile, flexural, impact, KIc, SEM, TGA, WAXRD, FTIR test results. IFSS obtained with untreated fibre/PLA (UFPLA) and alkali treated fibre/PLA (ATPLA) samples showed that ATPLA samples had greater IFSS than that of UFPLA samples. The increase in the formation of hydrogen bonding and mechanical interlocking of the alkali treated fibres with PLA could be responsible for the increased IFSS for ATPLA system compared to UFPLA system. Long and short fibre reinforced PLA composites were also produced with various processing conditions using compression moulding. A 32 wt% alkali treated long fibre PLA composite produced by film stacking with a TS of 83 MPa, YM of 11 GPa, flexural strength of 143 MPa, flexural modulus of 6.5 GPa, IE of 9 kJ/m2, and KIc of 3 MPa.m1/2 was found to be the best. This could be due to the better bonding of the alkali treated fibres with PLA. The mechanical properties of this composite have been found to be the best compared to the available literature. Hygrothermal and accelerated ageing of 32 wt% untreated and alkali treated long fibre/PLA composites ATPLA composites were more resistant than UFPLA composites towards hygrothermal and accelerated ageing environments as revealed from diffusion coefficients and tensile, flexural, impact, KIc, SEM, differential scanning calorimetry (DSC), WAXRD, and FTIR results. Increased potential hydrogen bond formation and mechanical interlocking of the alkali treated fibres with PLA could be responsible for the increased resistance of the ATPLA composites. Based on the present study, it can be said that the performance of natural fibre composites largely depend on fibre properties (e.g. length and orientation), matrix properties (e.g. cure kinetics and crystallinity), fibre treatment and processing methods, and composite processing methods.

Les paramètres de surface contrôlent les fonctions des cellules, en coopération avec leurs codes génétiques. Des études récentes soulignent l'impact combiné des signaux chimiques, topographiques et mécaniques des substrats d'adhésion sur les processus de différenciation. Cette étude se focalise sur le paramètre énergétique, et plus spécialement, sur l'influence exercée par la distribution spatiale des énergies de surface sur la différenciation des cellules neuronales. Le modèle étudié est constitué par les cellules de la lignée PC12, capables de se différencier en neurones suite au traitement par le facteur de croissance nerveux (NGF). Les cellules sont cultivées sur des surfaces de verre modifiées par auto-assemblage de monocouches d'alkylsiloxanes ou de biopolymères. La modification de la nature chimique et du degré d'organisation des monocouches module la distribution des composantes dispersives et polaires de l'énergie de surface, à une échelle inférieure au micron. Sur des substrats très homogènes (dotés de terminaisons CH3, NH2, ou OH), l'adhésion des cellules PC12 est modulée par le degré d'affinité chimique, et peu de cellules initient des neurites. Inversement, sur des substrats localement très hétérogènes, les cellules adhèrent quel que soit le couple chimique produisant les hétérogénéités (NH2/OH ou CH3/OH), et elles génèrent un nombre important de neurites en moins de 48 h, sans traitement au NGF. Ce travail démontre que les hétérogénéités chimiques de surface exercent une influence critique sur les processus de régénérescence des cellules nerveuses, en induisant des gradients dans les énergies d'adhésion aux échelles nanométriques.

Das Ziel der Arbeit „The Technological improvement of Portuguese pinewood by chemical modification” bestand darin, die Charakteristiken des Holzes der See-Kiefer (Pinus pinaster Ait.) und den Einfluss der chemischen Modifizierung hinsichtlich des Widerstandes gegen Meeresorganismen, sowie ihrer physikalischen und mechanischen Eigenschaften zu untersuchen. Vier Modifizierungstypen wurden getestet: 1,3-Dimethylol-4,5-dihydroxyethylen-Harnstoff (DMDHEU), N-Methylol-Melamine (MMF), Tetra-alkoxysilane (TEOS) und Wachs. Diese Arbeit besteht aus zwei Teilen: eine vorläufige und eine Haupt-Studie. In ersterer wurde eine Vielzahl von Materialeigenschaften untersucht - physikalische und mechanische Eigenschaften und ihre Wechselwirkungen. Besonderes Augenmerk wurde auf die Resistenz gegenüber Meeresorganismen gelegt, wobei die Rolle der Härte, der Form der Proben sowie der Toxizität der Chemikalien untersucht wurde. Im zweiten Teil der Arbeit wurde eine ausführliche Studie zum Thema Kriechen durchgeführt. Art und Grad der Modifizierung wurden in Abhängigkeit von der Belastung, von verschiedenen Umgebungsbedingungen und vom mechano-sorptiven Effekt evaluiert. Obwohl die Steifigkeit nicht signifikant verschieden war, traten Unterschiede in den anderen Eigenschaften auf. Einerseits waren die Anti-Quellungs-Effizienz und Steifigkeit-Stabilisierung erhöht. Andererseits waren die Bruchschlagarbeit und die Gleichgewichtsfeuchte signifikant durch Zellwand-Modifizierung (DMDHEU und MMF-Harz) reduziert, wobei eine enge Wechselbeziehung zwischen letzteren Variablen beobachtet wurde. Unter hohem Belastungsgrad oder unter dem Einfluss des mechano-sorptiven Effekts war für das modifizierte Holz mit Zellwandreaktion (DMDHEU and MMF) das Ausmaß des Kriechens geringer als das des unmodifiziertem Holzes. Für beide Arten von Harz wurde das relative Kriechen deutlich verringert, trotz unterschiedlicher Veränderungen in der Ausgleichsfeuchte, Steifigkeit Stabilisierung und Festigkeit. Die Anti-Kriech-Effizienz zeigte eine enge Korrelation mit der Abnahme der Gleichgewichtsfeuchte, der Anti-Quell-Effizienz und der Steifigkeits-Stabilisationseffizienz. Die lumen-füllende Modifizierung mit TEOS-Lösung hatte weder einen Einfluss auf den Kriech-Faktor noch auf die Gleichgewichtsfeuchte und die Steifigkeits-Stabilisationseffizienz. Bei den Meerwasseruntersuchungen waren die wichtigsten Schlussfolgerungen, dass die Härte und die Form der Proben keinen Einfluss auf die Resistenz gegenüber einem Befall durch die Meerwasser-Bohrschädlinge (Limnoriden und Terediniden) haben. Lumen-füllende Modifizierungen (TEOS und Wachs) hatten keine Wirkung hinsichtlich der Resistenz gegen Meerwasser-Bohrschädlinge. Hölzer, die mit Kondensationsharzen (DMDHEU und MMF) modifiziert waren, waren von einem Befall mit Limnoriden nicht betroffen. Aber nur DMDHEU mit einem Minimum an Modifizierung war geeignet, um einen Befall durch Terediniden über eine Expositionsdauer von 3 Jahren zu verhindern. Die Verwendung von modifiziertem Holz als Baumaterial für nicht-tragende Bauteile wie Anwendungen in Feuchträumen, Wandfassaden oder Gartenmöbeln ist bekannt. Diese Untersuchung unterstützt die Ausweitung seiner Anwendung für tragende Bauteile, besonders wenn das Design durch die Möglichkeit von Deformation bestimmt wird, die seine Funktionsfähigkeit einschränkt. Deshalb müssen das Versprödungsverhalten, insbesondere bei der Zellwand-Modifizierung mit DMDHEU, und die Designmöglichkeiten für mechanische Verbindungen bestimmt werden, um die Anwendungsmöglichkeiten des modifizierten Holzes als tragende Komponente auszuweiten, bei denen oft der Grenzzustand der Tragfähigkeit das Design der strukturellen Komponenten bestimmt.