Unmanned Aerial Vehicle (UAV) är en benämning på en obemannad flygande farkost. UAV är en benämning för själva farkosten och därför har Unmanned Aircraft System (UAS) tagit över eftersom det är ett begrepp som rör hela systemet som förutom flygfarkost innefattar start, landning, markstation och kommunikationslänk. Inom mätningsteknik är UAS ett relativt nytt begrepp och tekniken har sin historia mestadels inom det militära området. Syftet med denna studie är att analysera samt utvärdera två programvaror och en molntjänst för bearbetning och framtagning av ortofoto från UAS-data. De frågor som ställts inför arbetet är: kan en molntjänst ersätta ett avancerat datorprogram vid generering av ortofoton? Kan dessa datorprogram ge ett bra resultat utan hjälp av andra GIS-program? Vilket program är enklast att förstå och använda samt vilka är skillnaderna mellan programmen? Dessa frågor har besvarats genom användning av insamlat data och för att få utvärderingen rättvis har därför tre olika dataset skapats. Programtjänsterna som har utvärderats är Agisoft PhotoScan 0.9.0 och Pix4UAV Desktop/Cloud 2.1.2. Insamling av data har skett genom en flygning med en oktokopter över Fågelmyratippen i Dalarna. Resultaten visar att priset snabbt blir högt om endast Pix4UAV Cloud används och att överlag är PhotoScan billigare än Pix4UAV Desktop. Kvalitetsrapporten som följer med varje projekt är överskådlig i PhotoScan och mer ingående i Pix4UAV Desktop/Cloud. Trots samma indata blir utdatat olika vid bearbetning av de olika programmen, till exempel skiljer sig markupplösningen åt mellan programmen. Generellt är PhotoScan tydligare på att visa hur arbetsprocessen går till. Supporten hos båda företagen är bra, tips och tricks finns på respektive hemsida. Till PhotoScan finns även en manual för nedladdning samt en YouTube-kanal med instruktionsvideor. De enda slutsatserna vi drar är att Pix4UAV Cloud inte klarar av att ersätta ett avancerat bildbehandlingsprogram och att för tillfället bör ytterligare ett GIS-program användas som komplement för att få bästa resultat. I övrigt har vi endast skrapat på ytan av programmen och rekommenderar att läsaren tar till sig det vi skrivit under resultat och diskussion för att sedan bilda sig en egen uppfattning med hjälp av respektive programs prövotid. Till sist presenteras förslag på vidare studier inom ämnet. / Unmanned Aerial Vehicle (UAV) is a term for a remote controlled airbornevehicle. Since UAV is an acronym for the vehicle itself, Unmanned Aircraft Systems(UAS) has therefore replaced UAV, as it is a concept related to the wholesystem, beside the vehicle it also includes landing, ground station andcommunications link. Within land surveying UAS is a relatively new concept asthe technology has its history mainly associated to the military. The purposeof this study is to analyze and evaluate two software and a cloud service for processingand preparation of orthophotos from data collected with a UAS. The questions tobe answered in this thesis are: Can a cloud service replace an advancedcomputer software for generating orthophotos? Can these produce good resultswithout the help of other GIS software? Which software is the easiest tounderstand and to use and what are the main differences. These questions wereanswered by using collected data, and to get the evaluation fair three datasetshave been created. The software being evaluated are Agisoft PhotoScan andPix4UAV desktop/cloud. The data collection was done by a flight with an octokopterover Fågelmyratippen in Dalarna. The results show that the price quicklybecomes high if only Pix4UAV Cloud is used and that generally PhotoScan ischeaper than Pix4UAV Desktop. The quality report that comes with each projectis easy to understand in PhotoScan but more detailed in Pix4UAV Desktop/Cloud. Despitethe use of same data the results vary when processed, for example the groundresolution. Generally PhotoScan is better at showing the work process. Eachcompany’s support is good and they both have tips and tricks at their websites.On the Agisoft webpage there is a manual available for download and they alsohave a YouTube-channel with instruction videos. The conclusion is that thecloud service is not capable of replacing an advance image processing software.Another conclusion is that for the moment another GIS-program should be used toget the best results. We like to point out that we only scratched the surfaceof the software and we recommend that the reader embrace what we write inresults and discussion to then form their own opinion by using the softwareevaluation period. I the last part we present subjects of further study.

This thesis deals with increasing the safety of the external perimeter. The theoretical part describes the parameters of areas exhibiting an increased safety risk. For these spaces, relevant safety hazards and corresponding elimination methods are determined. Then, the term "drone" is analyzed in the context of its applicability. The practical section characterizes the process of building and configuring unmanned aircraft to guard the perimeter and the designing and fabrication of an automatic charging station for the aircraft. The final part of the thesis is a brief manual describing correct handling of the created system.

Letecká fotogrammetrie v oblasti bezpilotních systémů představuje rychle rozvíjející se obor nalézající uplatnění napříč nejen průmyslovými odvětvími. Široce rozšířená metoda nepřímého georeferencování založená na vlícovacích bodech sice dosahuje vysoké přesnosti a spolehlivosti, v některých speciálních aplikacích nicméně není použitelná. Tato disertační práce se zabývá vývojem senzorického systému pro přímé georeferencování aplikovatelného na malých bezpilotních prostředcích a dále také návrhem vhodných kalibračních metod a testováním přesnosti. Významná část práce je věnována novým oblastem, kde může navržený systém pomoci eliminovat bezpečnostní rizika spojená s daným prostředím. V tomto kontextu byl systém testován v reálných podmínkách při mapování sněhu v horských oblastech a při robotickém mapování radiace.

The Boeing Joined-Wing SenorCraft is a novel aircraft design that has many potential benefits, especially for surveillance missions. However, computational studies have shown the potential for nonlinear structural responses in the joined-wing configuration due to aerodynamic loading that could result in aft wing buckling. The design, construction, and flight testing of a 1/9th scale, aeroelastically tuned model of the Joined-Wing SensorCraft has been the subject of an ongoing international collaboration aimed at experimentally demonstrating the nonlinear aeroelastic response in flight. To accurately measure and capture the configuration\'s potential for structural nonlinearity, the test article must exhibit equivalent structural flexibility and be designed to meet airworthiness standards. Previous work has demonstrated airworthiness through the successful flight of a Geometrically Scaled Remotely Piloted Vehicle. The work presented in this thesis involves evaluation of an aeroelastically tuned design through ground-based experimentation. The result of these experimental investigations has led to the conclusion that a full redesign of the forward and aft wings must be completed to demonstrate sufficient geometric nonlinearity for the follow-on Aeorelastically Tuned Remotely Piloted Vehicle. This thesis also presents flight test plans for the aeroelastically tuned RPV. / Master of Science

Small unmanned aerial vehicles (sUAV) can produce valuable data for inspections, topography, mapping, and 3D modeling of structures. Used by multiple industries, sUAV can help inspect and study geographic and structural sites. Typically, the sUAV and camera specifications require optimal conditions with known geography and fly pre-determined flight paths. However, if the environment changes, new undetectable aerial hazards may intersect new flight paths. This makes it difficult to construct autonomous flight path missions that are safe in post-hazard areas where the flight paths are based on previously built models or previously known terrain details. The goal of this research is to make it possible for an unskilled pilot to obtain high quality images at key angles which will facilitate the inspections of dangerous environments affected by natural disasters through the construction of accurate 3D models. An iterative process with converging variables can circumvent the current deficit in flying UAVs autonomously and make it possible for an unskilled pilot to gather high quality data for the construction of photogrammetric models. This can be achieved by gaining preliminary photogrammetric data, then creating new flight paths which consider new developments contained in the generated dense clouds. Initial flight paths are used to develop a coarse representation of the target area by aligning key tie points of the initial set of images. With each iteration, a 3D mesh is used to compute a new optimized view and flight path used for the data collection of a better-known location. These data are collected, the model updated, and a new flight path is computed until the model resolution meets the required heights or ground sample distances (GSD). This research uses basic UAVs and camera sensors to lower costs and reduce the need for specialized sensors or data analysis. The four basic stages followed in the study include: determination of required height reductions for comparison and convergent limitation, construction of real-time reconnaissance models, optimized view and flight paths with vertical and horizontal buffers constructed from previous models, and develop an autonomous process that combines the previous stages iteratively. This study advances the use of autonomous sUAV inspections by developing an iterative process of flying a sUAV to potentially detect and avoid buildings, trees, wires, and other hazards in an iterative manner with minimal pilot experience or human intervention; while optimally collecting the required images to generate geometric models of predetermined quality.

This thesis presents the work of two significant projects. In the first project, a suite of benchmark problems for grid energy management are presented which demonstrate several issues characteristic to the dynamic optimization of these systems. These benchmark problems include load following, cogeneration, tri-generation, and energy storage, and each one assumes perfect foresight of the entire time horizon. The Gekko Python package for dynamic optimization is introduced and two different solution methods are discussed and applied to solving these benchmarks. The simultaneous solve mode out-performs the sequential solve mode in each benchmark problem across a wide range of time horizons with increasing resolution, demonstrating the ability of the simultaneous mode to handle many degrees of freedom across a range of problems of increasing difficulty. In the second project, combined optimization of propulsion system design, flight trajectory planning and battery mass optimization is applied to solar-regenerative high-altitude long-endurance (SR-HALE) aircraft through a sequential iterative approach. This combined optimization approach yields an increase of 20.2% in the end-of-day energy available on the winter solstice at 35°N latitude, resulting in an increase in flight time of 2.36 hours. The optimized flight path is obtained by using nonlinear model predictive control to solve flight and energy system dynamics over a 24 hour period with a 15 second time resolution. The optimization objective is to maximize the total energy in the system while flying a station-keeping mission, staying within a 3 km radius and above 60,000 ft. The propulsion system design optimization minimizes the total energy required to fly the optimal path. It uses a combination of blade element momentum theory, blade composite structures, empirical motor and motor controller mass data, as well as a first order motor performance model. The battery optimization seeks to optimally size the battery for a circular orbit. Fixed point iteration between these optimization frameworks yields a flight path and propulsion system that slightly decreases solar capture, but significantly decreases power expended. Fully coupling the trajectory and design optimizations with this level of accuracy is infeasible with current computing resources. These efforts show the benefits of combining design and trajectory optimization to enable the feasibility of SR-HALE flight.

As Unmanned Aerial Vehicles (UAVs) are getting more popular and their area of use is expanding rapidly, the security aspect becomes important to investigate. This thesis is a systematic literature review that examines which type of cyber attacks are most common among attacks directed at civilian use UAVs and what consequences they bring. All cyber attacks presented in the report are categorized using the STRIDE threat model, which risk they pose and what equipment is required for the adversary to follow through with the attack. The findings are that Spoofing and Denial of Service attacks are the most common cyber attack types against UAVs and that hijacking and crashing are the most common results of the attacks. No equipment that is difficult to access is required for either of the attack types in most cases, making the result an indicator that the security state for civilian use UAVs today needs improving. / Obemannade luftburna farkoster (OLF) blir mer vanliga allteftersom deras användningsområde utökas, vilket innebär att cybersäkerhetsaspekten behöver studeras. Detta arbete är en systematisk litteraturstudie som undersöker vilka typer av cyberattacker riktade mot drönare som är vanligast och vilka risker de medför. Attackerna i rapporten är kategoriserade med hjälp av metoden STRIDE samt efter vilka mål attackerna haft och vilken utrustning som krävs. Resultatet är att Spoofing och Denial of Service-attacker är vanligast och att de medför att attackeraren kan kapa eller krascha drönaren. Ingen svåråtkomlig utrustning krävs för någon av dessa attacktyper vilket indikerar att säkerhetsläget för civila drönare behöver förbättras.

With the proliferation of unmanned aircraft designed for national security and commercial purposes, opportunities exist to create high-fidelity aerodynamic models with flight test techniques developed specifically for remotely piloted aircraft. Then, highly maneuverable unmanned aircraft can be employed to their greatest potential in a safe manner using advanced control laws. In this dissertation, novel techniques are used to identify nonlinear, coupled, aerodynamic models for fixed-wing, unmanned aircraft from flight test data alone. Included are quasi-steady and unsteady nominal flight models, aero-propulsive models, and spinning flight models. A novel flight test technique for unmanned aircraft, excitation with remote uncorrelated pilot inputs, is developed for use in nominal and nonlinear flight regimes. Orthogonal phase-optimized multisine excitation signals are also used as inputs while collecting gliding, aero-propulsive, and spinning flight data. A novel vector decomposition of explanatory variables leads to an elegant model structure for stall spin flight data analysis and spin aerodynamic modeling. Results for each model developed show good agreement between model predictions and validation flight data. Two novel applications of aerodynamic modeling are discussed including energy-based nonlinear directional control and a spin flight path control law for use as a flight termination system. Experimental and simulation results from these applications demonstrate the utility of high-fidelity models developed from flight data. / Doctor of Philosophy / This dissertation presents flight test experiments conducted using a small remotely controlled airplane to determine mathematical equations and parameter values, called models, to describe the airplane's motion. Then, the models are applied to control the path of the airplane. The process to develop the models and predict an airplane's motion using flight data is described. New techniques are presented for data collection and analysis for unusual flight conditions, including a spinning descent. Results show the techniques can predict the airplane's motion very well. Two experiments are presented demonstrating new applications and the usefulness of the mathematical models.

With the popularity of unmanned aircraft systems (UAS), there is a growing need to assess airworthiness for safe operations in shared airspace. In the context of this thesis, shared airspace implies the introduction of UAS into airspace designated for manned aircraft. Airworthiness guidelines are generally statements that state safety requirements to prevent unwanted consequences, such as aircraft accidents. Many governmental agencies such as the U.S. Federal Aviation Administration (FAA) analyzed the risks of UAS to third-parties, all personnel and properties exterior to the aircraft. This thesis concerns the adaptation of existing airworthiness documents written for manned aircraft to UAS. The proposed method has three stages that are applied in sequence to identify relevant and irrelevant airworthiness statements, the building blocks of an airworthiness document, with regard to UAS. This method is applied to MIL-HDBK-516C, used as a case study; however, the proposed methodology can be applied to any airworthiness document developed for manned aircraft. This thesis presents a list of all MIL-HDBK-516C airworthiness statements that are directly relevant, indirectly relevant, and irrelevant to UAS; additionally, the indirectly relevant airworthiness statements to UAS are provided along with suggested modification. / M.S. / With the popularity of unmanned aircraft systems (UAS), there is a growing need to assess airworthiness for safe operations in shared airspace. Airspace is the available air for aircraft to fly in; most airspaces are regulated and are subject to the jurisdiction of a particular country. In the context of this thesis, shared airspace implies the introduction of UAS into airspace designated for manned aircraft. Airworthiness guidelines are generally statements that state safety requirements to prevent unwanted consequences, such as aircraft accidents. Many governmental agencies such as the U.S. Federal Aviation Administration (FAA) analyzed the risks of UAS to third-parties, all personnel and properties exterior to the aircraft. This thesis concerns the adaptation of existing airworthiness documents written for manned aircraft to UAS. The proposed method has three stages that are applied in sequence to identify relevant and irrelevant airworthiness statements, the building blocks of an airworthiness document, with regard to UAS. This method is applied to MIL-HDBK-516C, Department of Defense Handbook: Airworthiness Certification Criteria, used as a case study. MIL-HDBK-516C is a military handbook used for airworthiness guidance. However, the proposed methodology can be applied to any airworthiness document developed for manned aircraft. This thesis presents a list of all MIL-HDBK-516C airworthiness statements that are directly relevant, indirectly relevant, and irrelevant to UAS; additionally, the indirectly relevant airworthiness statements to UAS are provided along with suggested modification.

This thesis presents a dedicated GPS-denied landing system designed for electric vertical takeoff and landing (eVTOL) aircraft. The system employs active fiducial light pattern localization (AFLPL), which provides highly accurate and reliable navigation during critical landing phases. AFLPL utilizes images of a constellation comprised of modulating infrared lights strategically positioned on the landing site, to determine the aircraft pose through the use of a perspective-n-point (PnP) solver. The AFLPL system underwent thorough development, enhancement, and implementation to address and demonstrate its potential in navigation and its inherent limitations. A proposed method addresses the limitations of AFLPL by using an extended Kalman filter (EKF) to fuse PnP camera pose estimates with sensor measurements from an inertial measurement unit (IMU), attitude heading reference system (AHRS), and optional global positioning system (GPS). The EKF estimation is reported to significantly enhance the accuracy, reliability, and update frequency of the aircraft state estimation. To refine and validate the AFLPL and EKF algorithms, a simulation was developed, consisting of an eVTOL executing a glideslope landing trajectory. Furthermore, a hardware system consisting of a multirotor and infrared light ground units was implemented to test these methods under real-world conditions. This research culminated in the successful demonstration of the AFLPL-based estimation system's efficacy through an autonomous, GPS-denied landing flight test, affirming its potential to improve the navigation and control of eVTOL aircraft lacking access to GPS information.