Ce travail s’inscrit dans le contexte d’un fort accroissement des émissions de gaz à effetde serre au niveau mondial. Une idée est de réutiliser ce CO2 comme matrice de stockageénergétique pour fabriquer un carburant de synthèse en le combinant avec de l’hydrogèneproduit à partir de décomposition de l’eau par apport d’énergie nucléaire ou renouvelable,évitant ainsi le recours au pétrole ou au charbon. Cette idée prend tout son sens dans lecontexte spécifique français où l’électricité, majoritairement produite par énergie nucléaire etrenouvelable a une faible empreinte carbone. Dans ce cadre nous nous proposonsd’hydrogéner le CO2 en gaz de synthèse par la réaction Reverse Water-Gas-Shift (RWGS),lequel gaz de synthèse est alors transformé en carburant. Ce projet de recherche est composéde deux parties principales :La première partie se focalise sur le développement d’un catalyseur sélectif et stable pourla réaction de RWGS à température modérée (723-773 K). A cet égard nous avons procédé àune modélisation conjointe de la micro-cinétique de la réaction de RWGS et des principalesréactions parasites pour déterminer un composé multi-métallique innovant ; celui-ci a pu êtreconfronté avec succès aux catalyseurs industriels utilisés, dans les conditions optimales de laréaction de RWGS. Dans une deuxième partie, nous avons effectué un remontagethermodynamique de l’ensemble d’une conversion du CO2 issu de fumées industrielles encarburant de synthèse (dimethyl ether, DME) sur un cas concret à grande échelle en France.La simulation du procédé CO2 to DME montre une efficacité énergétique du procédé de 52%et une réduction des émissions du CO2 de la cimenterie de 88%. / This work is in the context of large-scale efforts to enhance greenhouse gas emissionsmitigation. A potential way to recycle CO2 as a carbon feedstock to produce a synthetic fuelby the conversion of CO2 and hydrogen, produced from water electrolysis using nuclear orrenewable energy. This process may be sustainable in some specific context like in Frenchcontext; French electricity is mainly generated by nuclear and renewable energies that havelow carbon footprints. In this work, a synthetic fuel is produced by CO2 hydrogenation intosynthesis gas via the Reverse Water-Gas Shift (RWGS) reaction, then synthesis gas isconverted into a synthetic fuel. This research project consists of two main parts:The first part focuses on the development of a selective and stable catalyst for the RWGSreaction at moderate temperature (723-773 K). We have applied the micro-kinetic approach ofthe RWGS reaction and its side reactions in order to determine a multi-metallic catalyst,which has shown to perform better selectivity and stability than a conventional, commercialcatalyst under the optimal operating conditions of the RWGS reaction. In the second part, weconducted the simulations of a large-scale dimethyl ether (DME) production process by theconversion of CO2 from industrial flue gases in the French context. The simulation of the CO2to DME process showed the process energy efficiency of 52% and the emissions reductionpotential of 88% of total CO2 emissions.

Made available in DSpace on 2016-06-02T19:56:50Z (GMT). No. of bitstreams: 1 5035.pdf: 2696735 bytes, checksum: 1e1df725e495abb44c7ceab896e17284 (MD5) Previous issue date: 2013-03-12 / Universidade Federal de Sao Carlos / Particle size effect and Ce addition on the catalytic properties of Cu/Al2O3catalysts were investigated for the water gas shift reaction (WGS). The catalysts were prepared by dry impregnation of an aqueous solution of nitrates of the respective metals on alumina, synthesized by sol-gel method. Samples were prepared with 5, 10 and 15% w/w of metallic copper and 12% w/w of CeO2. The catalysts were characterized by X-ray diffraction (XRD), temperature programmed reduction (TPR) spectroscopy, X-ray absorption (XAS). The WGS reaction was performed with reagents ratio of H2O:CO = 1:3 with temperature range from 200 to 350° C. The crystallites CuO were not detected by XRD. As the Cu content increased, the crystallite size of CeO2 decreased with a fluorite type structure from 7.4 to 3.4 nm. The results of TPR showed that the interaction Cu-O-Al was crucial to reduce temperature and ceria addition on the catalysts did not affect the temperature reduction of the CuO. The XANES in situ results along the WGS reaction showed that metallic Cu predominated and ceria was partially reduced. EXAFS results showed that the Cu particle size increased from 0.65 to 0.91 nm with an increased load of copper from 5 to 15%, respectively. After the reduction, step prior to reaction, the catalysts were not completely reduced. The degree of reduction increased with the Cu particle size and it was also dependent on the temperature and the oxidation potential of mixing of the reactants. The addition of ceria did not change the degree of reduction of samples Cu/Al2O3. The results suggest that the Cu particles have a reduced Cu core covered with an oxide layer. The catalytic activity increased as the Cu particle size decreased, which can be associated with the presence of the redox couple Cu+/Cu0. This provides a possibility of CO oxidation and its reoxidation due to water activation. The ceria addition also increased catalytic activity and it is probably attributed to activation of the water on the surface of ceria, followed by transfer of oxygen from its structure to the oxidation of CO in an interface Cu-CeO2. / O efeito do tamanho da partícula de Cu e a adição de céria nas propriedades catalíticas dos catalisadores de Cu/Al2O3 foram investigados para a reação de deslocamento gás água (WGS). Os catalisadores foram preparados por impregnação da solução alcoólica dos respectivos nitratos dos metais em alumina, sintetizada pelo método sol-gel. As amostras foram preparadas com teores de Cu de 5, 10 e 15% m/m e 12% m/m de CeO2. Os catalisadores foram caracterizados por difração de raios X (DRX), redução a temperatura programada (TPR) e espectroscopia de absorção de raios X (XAS). A reação de WGS foi realizada com a razão de reagentes H2O:CO = 3:1 em temperaturas entre 200 e 350ºC . Os cristalitos de CuO não foram detectados por DRX. Com o aumento do teor de Cu de 5 para 15% m/m verificou-se um decréscimo no tamanho de cristalitos de CeO2 com uma estrutura do tipo fluorita de 7,4 para 3,4 nm. A interação Cu-O-Al foi determinante na temperatura de redução dos catalisadores e a adição da céria não afetou a temperatura da redução do CuO. Os resultados de XANES in situ mostraram que ao longo da reação de WGS o Cu na forma metálica foi predominante e a céria encontrava-se parcialmente reduzida. Os resultados de EXAFS mostraram que o tamanho das partículas de Cu aumentou de 0,65 para 0,91nm com o aumento do teor do cobre de 5 para 15%, respectivamente. Após a etapa de redução que antecede a reação, os catalisadores não se encontraram completamente reduzidos. O grau de redução aumentou com o tamanho da partícula de Cu e mostrou-se dependente também da temperatura e do potencial de oxidação da mistura dos reagentes. A adição da céria não modificou o grau de redução das amostras de Cu/Al2O3. Tais resultados sugerem que as partículas de cobre apresentam um núcleo reduzido com óxido de cobre na superfície. A atividade catalítica aumentou com a diminuição do tamanho de partícula de Cu, o que pode estar associado à maior presença do par redox Cu+/Cu0 nas menores partículas. Este possivelmente proporciona a oxidação do CO, reduzindo o Cu+ ao Cu0 e a reoxidação ocorre devido à ativação da água. A adição da céria também aumentou a atividade catalítica, a qual foi atribuída provavelmente à ativação da água nas vacâncias de oxigênio da céria, seguida da transferência de oxigênio de sua estrutura para a oxidação do CO em uma interface Cu-CeO2.

CO2 global emissions exceed 30 Giga tonnes (Gt) per year, and the high atmospheric concentrations are detrimental to the environment. In spite of efforts to decrease emissions by sequestration (carbon capture and storage) and repurposing (use in fine chemicals synthesis and oil extraction), more than 98% of CO2 generated is released to the atmosphere. With emissions expected to increase, transforming CO2 to chemicals of high demand could be an alternative to decrease its atmospheric concentration. Transportation fuels represent 26% of the global energy consumption, making it an ideal end product that could match the scale of CO2 generation. The long-term goal of the study is to transform CO2 to liquid fuels closing a synthetic carbon cycle. Synthetic fuels, such as diesel and gasoline, can be produced from syngas (a combination of CO and H2) by Fischer Tropsch synthesis or methanol synthesis, respectively. Methanol can be turned into gasoline by MTO technologies. Technologies to make renewable hydrogen are already in existence, but CO is almost exclusively generated from methane. Due to the high stability of the CO2 molecule, its transformation is very energy intensive. Therefore, the current challenge is developing technologies for the conversion of CO2 to CO with a low energy requirement. The work in this dissertation describes the development of a recyclable, isothermal, low-temperature process for the conversion of CO2 to CO with high selectivity, called Reverse Water Gas Shift Chemical Looping (RWGS-CL). In this process, H2 is used to generate oxygen vacancies in a metal oxide bed. These vacancies then can be re-filled by one O atom from CO2, producing CO. Perovskites (ABO3) were used as the oxide material due to their high oxygen mobility and stability. They were synthesized by the Pechini sol-gel synthesis, and characterized with X-ray diffraction and surface area measurements. Mass spectrometry was used to evaluate the reducibility and re-oxidation abilities of the materials with temperature-programmed reduction and oxidation experiments. Cycles of RWGS-CL were performed in a packed bed reactor to study CO production rates. Different metal compositions on the A and B site of the oxide were tested. In all the studies, La and Sr were used on the A site because their combination is known to enhance oxygen vacancies formation and CO2 adsorption on the perovskites. The RWGS-CL was first demonstrated in a non-isothermal process at 500 °C for the H2-reduction and 850 °C for the CO2 conversion on a Co-based perovskite. This perovskite was too unstable for the H2 treatment. Addition of Fe to the perovskite enhanced its stability, and allowed for an isothermal and recyclable process at 550 °C with high selectivity towards CO. In an effort to decrease the operating temperature, Cu was incorporated to the structure. It was found that Cu addition inhibited CO formation and formed very unstable oxide materials. Preliminary studies show that application of this technology has the potential to significantly reduce CO2 emissions from captured flue gases (i.e. from power plants) or from concentrated CO2 (adsorbed from the atmosphere), while generating a high value chemical. This technology also has possible applications in space explorations, especially in environments like Mars atmosphere, which has high concentrations of atmospheric carbon dioxide.

Ceria (CeO2) containing materials are the subject of numerous investigations recently owing to their broad range of applications in various fields. Ceria is one of the most important components of three-way catalysts (TWC). Two unique features are responsible for making CeO2 a promising material for use either as a support or as an active catalyst: (a) the Ce3+/Ce4+ redox couple, and (b) its ability to shift between CeO2 and CeO2–δ under oxidizing and reducing conditions retaining fluorite structure. Despite widespread applications, pure CeO2 has a serious problem of degradation in performance with time at elevated temperatures. CeO2 undergoes rapid sintering under high operating temperatures, which leads to loss of oxygen buffer capacity and deactivation of the catalyst. In addition, the amount of lattice oxygen taking part in the redox reactions is small (δ ~ 0.05), and therefore unsatisfactory for practical applications. Therefore further improvement of OSC of CeO2 has led to development of new CeO2-based oxygen storage materials. Modifications of CeO2 with isovalent or aliovalent ion (noble metal, rare-earth or transition metal) confer new properties to the catalysts, such as better resistance to sintering and high catalytic activity. The demand for ceria-based oxygen storage materials were accelerated in the 1970s with the introduction of strict automotives exhaust treatment worldwide to combat the obnoxious gases released in the atmosphere causing deterioration of air quality. Significant developments have occurred in this field leading to better understanding of the catalysts synthesis, structure and improved catalytic activity. The introductory chapter 1 is a compendium to provide an overview of the topic, examine the critical lacunae in the field and the proposal for future developments. In chapter 2 we present the studies on synthesis and catalytic properties of Ce1– xSnxO2 (x= 0.1–0.5) solid solution and its Pd substituted analogue. A brief description of the single step solution combustion synthesis, catalysts characterization techniques such as powder X-ray diffraction (XRD), high resolution transmission electron microscopy (HRTEM), X-ray photoelectron spectroscopy (XPS) are given. Design and fabrication of temperature programmed reduction by hydrogen (H2-TPR) system in this laboratory is given in details. The home-made temperature programmed catalytic reaction system with a quadrupole mass spectrometer and an on-line gas-chromatograph for gas analysis is described. For the synthesis of Ce1–xSnxO2 solid solution by a single-step solution combustion method we have used tin oxalate as precursor for Sn. The compounds were characterized by XRD, XPS and TEM. Oxygen storage capacity of the Ce1–xSnxO2 solid solution was measured by H2-TPR. The cubic fluorite structure remained intact up to 50% of Sn substitution in CeO2, and the compounds were stable up to 700 °C. Oxygen storage capacity of Ce1–xSnxO2 was found to be much higher than that of Ce1–xZrxO2 due to accessible Ce4+/Ce3+ and Sn4+/Sn2+ redox couples at temperatures between 200 to 400 °C. Pd2+ ions in Ce0.78Sn0.2Pd0.02O2-δare highly ionic, and the lattice oxygen of this catalyst is highly labile, leading to low temperature CO to CO2 conversion. The rate of CO oxidation was 2 μmolg–1s–1 at 50 °C. NO reduction by CO with 70% N2 selectivity was observed at ~200 °C and 100% N2 selectivity below 260 °C with 1000-5000 ppm NO. Pd2+ ion substituted Ce1–xSnxO2 catalyst can be used for low temperature exhaust applications due to the involvement of the Sn2+/Sn4+ redox couple along with Pd2+/Pd0 and Ce4+/Ce3+ couples. With the goal to understand the improved OSC for Ce1–xSnxO2 solid solution, we have investigated the structure and its relative stability based on first-principles density functional calculations. In chapter 3, we present our studies on the relative stability of Ce1–xSnxO2 solid solution in fluorite in comparison to rutile structure of the other end-member SnO2. Analysis of relative energies of fluorite and rutile phases of CeO2, SnO2, and Ce1–xSnxO2 indicates that fluorite structure is most stable for Ce1–xSnxO2 solid solution. An analysis of local structural distortions reflected in phonon dispersion show that SnO2 in fluorite structure is highly unstable while CeO2 in rutile structure is only weakly unstable. Thus, Sn in Ce1–xSnxO2-fluorite structure is associated with high local structural distortion whereas Ce in Ce1–xSnxO2-rutile structure, if formed, will show only marginal local distortion. Determination of M–O (M = Ce or Sn) bond lengths and analysis of Born effective charges for the optimized structure of Ce1–xSnxO2 show that local coordination of these cations changes from ideal eight-fold coordination expected of Ce4+ ion in fluorite lattice, leading to generation of long and short Ce–O and Sn–O bonds in the doped structure. Bond valence analyses for all ions show the presence of oxygen with bond valence ~1.84. These weakly bonded oxygen ions are relevant for enhanced oxygen storage/release properties observed in Ce1–xSnxO2 solid solution. In chapter 4, we present detailed structural analysis of Ce1–xSnxO2 and Ce1–x– ySnxPdyO2–δsolid solutions based on our DFT calculations supported with EXAFS studies. Both EXAFS analysis and DFT calculation reveal that in the solid solution Ce exhibits 4 + 4 coordination, Sn exhibits 4 + 2 + 2 coordination and Pd has 4 + 3 coordination. While the oxygen in the first four coordination with short M—O bonds are strongly held in the lattice, the oxygens in the second and higher coordinations with long M—O bonds are weakly bound, and they are the activated oxygen in the lattice. Bond valence analysis shows that oxygen with valencies as low as 1.65 are created by the Sn and Pd ion substitution. Another interesting observation is that H2-TPR experiment of Ce1–xSnxO2 shows a broad peak starting from 200 to 500 oC, while the same reduction is achieved in a single step at ~110 oC in presence Pd2+ ion. Substitution of Pd2+ ion thus facilitates synergistic reduction of the catalyst at lower temperature. We have shown that simultaneous reduction of the Ce4+ and Sn4+ ions by Pd0 is the synergistic interaction leading to high oxygen storage capacity at low temperature. In chapter 5, we present the effect of substituting aliovalent Fe3+ ion on OSC and catalytic activity of ceria. Ce0.9Fe0.1O2–δ and Ce0.89Fe0.1Pd0.01O2–δ solid solutions have been synthesized by solution combustion method, which show higher oxygen storage/release property compared to CeO2 and Ce0.8Zr0.2O2. Temperature programmed reduction and XPS study reveal that the presence of Pd ion in Ce0.9Fe0.1O2–δ facilitates complete reduction of Fe3+ to Fe2+ state and partial reduction of Ce4+ to Ce3+ state at temperatures as low as 105 oC compared to 400 oC for monometal-ionic Ce0.9Fe0.1O2–δ. Fe3+ ion is reduced to Fe2 and not to Fe0 due to favorable redox potential for Ce4 + Fe2൅ → Ce3 + Fe3 reaction. Using first-principles density functional theory calculation we determine M—O (M = Pd, Fe, Ce) bond lengths, and find that bond lengths vary from shorter (2.16 Å) to longer (2.9 Å) bond distances compared to mean Ce—O bond distance of 2.34 Åfor CeO2. Using these results in bond valence analysis, we show that oxygen with bond valences as low as –1.55 are created, leading to activation of lattice oxygen in the bimetal ionic catalyst. Temperatures of CO oxidation and NO reduction by CO/H2 are lower with the bimetal ionic Ce0.89Fe0.1Pd0.01O2–δ catalyst compared to monometal-ionic Ce0.9Fe0.1O2–δ and Ce0.99Pd0.01O2–δ catalysts. From XPS studies of Pd impregnated on CeO2 and Fe2O3 oxides, we show that the synergism leading to low temperature activation of lattice oxygen in bimetal-ionic catalyst Ce0.89Fe0.1Pd0.01O2–δ is due to low-temperature reduction of Pd2 to Pd0, followed by Pd0 + 2Fe3൅ → Pd2 +2Fe2, Pd0 + 2Ce4൅ → Pd2 + 2Ce3redox reaction. In chapter 6, we simulate the structure of Ce1–xMxO2–δ (M = transition metal, noble metal and rare–earth ions) for theoretical understanding of origin of OSC in these oxides and to draw a general criteria required to increase the OSC in ceria. The relationship between the OSC and structural changes induced by the dopant ion was investigated by H2-TPR and first-principles based density functional calculations. Transition metal and noble metal ions substitution in ceria greatly enhances the reducibility of Ce1–xMxO2–δ (M = Mn, Fe, Co, Ni, Cu, Pd, Pt, Ru), whereas rare–earth ions substituted Ce1–xAxO2–δ (A = La, Y) have very little effect in improving the OSC. Our simulated optimized structure shows deviation in cation–oxygen bond length from ideal bond length of 2.34 Å (for CeO2). For example, our calculation for Ce28Mn4O62 structure shows that Mn—O bonds are in 4+2 coordination with average bond lengths of 2.0 and 3.06 Å respectively. While the four short Mn–O bond lengths for the calculated structure spans the bond distance region of Mn2O3, and the other two Mn–O bonds are moved to longer distances. The dopant transition and noble metal ions also affects Ce coordination shell and results in the formation of longer Ce—O bonds as well. Thus longer cation-oxygen bond lengths for both dopant and host ions results in enhanced synergistic reduction of the solid solution. With Pd ion substitution in Ce1–xMxO2–δ (M = Mn Fe, Co, Ni, Cu) further enhancement in OSC is observed in H2–TPR. This effect is reflected in our calculations by the presence of still longer bonds compared to the model without Pd ion doping. Synergistic effect is, therefore, due to enhanced reducibility of both dopant and host ion induced due to structural distortion of fluorite lattice in presence of dopant ion. For RE ions (RE = Y, La) our calculations show very little deviation of bonds lengths from ideal fluorite structure. The absence of longer Y— O/La—O and Ce–O bonds make the structure very less susceptible to reduction [8]. Since Pd substituted Ce1–xSnxO2 showed high OSC and catalytic activity towards CO oxidation and NO reduction, we tested this catalyst for water-gas shift (WGS) reaction and the results are presented in chapter 7. Over 99.5 % CO conversion to H2 is observed at 300 ± 25 oC. Based on different characterization techniques we found that the present catalyst is resistant to deactivation due to carbonate formation and sintering of Pt on the surface when subjected to longer duration of reaction conditions. The catalyst does not require any pre-treatment or activation between start-up/shut-down reaction operations. Formation of side products such as methane, methanol, formaldehyde, coke etc. was not observed under the WGS reaction conditions indicating the high selectivity of the catalyst for H2. Temperature programmed reduction of the catalyst in hydrogen (H2–TPR) shows reversible reduction of Ce4+ to Ce3+, Sn4+ to Sn2+ and Pt4+ to Pt0 oxidation state with oxygen storage capacity (OSC) of 3500 μmol g–1 at 80 oC. Such high value of OSC indicates the presence of highly activated lattice oxygen. CO oxidation in presence of stoichiometric O2 shows 100 % conversion to CO2 at room temperature. The catalyst also exhibits 100% selectivity for CO2 at room temperature towards preferential oxidation (PROX) of residual CO in presence of excess hydrogen in the feed. To further validate our DFT results presented in the thesis, DFT calculations on Ce2Zr2O8–Ce2Zr2O7 system were performed and the results are given in the last chapter 8. Ce2Zr2O7 does not show any oxygen storage/release property unlike Ce2Zr2O8 (=Ce0.5Zr0.5O2). Bond lengths obtained from DFT simulation on Ce2Zr2O7 structure showed well-defined Ce—O and Zr—O bonds expected of the pyrochlore structure, unlike distribution of bond lengths as has been observed for Ce1–xMxO2–δ case. Absence of bonds distribution indicates that the oxygen sublattice is not distorted in Ce2Zr2O7 in agreement with its closed packed structure. Filling of the 1/8 of the tetrahedral oxide ion vacancies will result in Ce2Zr2O8 structure, and DFT calculation for this structure show wide distribution of bond lengths. Long Ce—O and Zr—O bonds appear in the bond-distribution plot, suggesting substantial distortion of the oxygen sublattice. Thus absence of longer cation-oxygen bond in pyrochlore structure validates the structural calculations presented in this thesis. Based on the results derived in all the chapters, a critical review of the work is presented and major conclusions are given in the last chapter

Treatment of fuel cell feed H2 for the removal of CO is important owing to the poisoning of the catalysts, thereby affecting the performance of the fuel cell. Strong and preferential adsorption of CO over the catalyst takes place resulting in a reduction of the power output of the cell. Therefore, it is important to treat the fuel cell feed H2 to reduce its CO content below the tolerable limit. Development of efficient catalysts for the treatment of synthesis gas for the removal of CO and and H2 enrichment of the gas to make it suitable for fuel cells is one of the two goals of this thesis. One of the various possible strategies for the removal of CO from the synthesis gas can be the use of the water-gas shift reaction. We have developed noble metal substituted ionic catalysts for catalyzing the water-gas shift reaction and have studied in detail the kinetics of the reactions by proposing the relevant reaction mechanisms. Solution combustion, a novel technique for synthesizing nanocrystalline materials, was used for the synthesis of all the catalysts. All the compounds synthesized were solid solutions of the noble metal ion and transition or rare earth metal oxide support. Three different supports were used, viz., CeO2, ZrO2 and TiO2. Substitution of Zr and Ti in CeO2 up to 15 at% was also carried out to obtain the compounds with enhanced oxygen storage capacity. All the compounds were characterized by X-ray diffraction, X-ray photoelectron spectroscopy and transmission electron microscopy. In some cases, where it was required, the use of FT-Raman spectroscopy was made for structural analysis. The compounds were nanocrystalline with metals substituted in ionic form in the support. The water-gas shift reaction was carried out over the synthesized catalysts with a reactant gas mixture that simulated the actual refinery gas composition. The variation of CO concentration with temperature was traced. The changes in the oxidation state of the metal showed the involvement of the various redox pairs over the reducible oxide like substituted CeO2 and TiO2. The mechanism of the reaction over ZrO2-based compounds was found to take place utilizing the surface hydroxyl groups. Rate expressions for the reactions over all the catalysts following different mechanisms were derived from the proposed elementary processes. Nonlinear regression was used for the estimation of various parameters describing the rate of reaction. Having established the high activity of Pt-ion substituted TiO 2 for the reactions, steam reforming of wood gas obtained from the gasification of Casuarina wood chips was carried out. The enrichment of the gas stream, which initially consisted of nearly 10% H 2 was carried out by steam reforming and H2-rich stream was obtained with H2 as high as 40% by volume in the treated gas. The second motive behind this thesis was to test the activity of the noble-metal substituted ionic catalysts for the treatment of the exhaust gas coming out of a fuel cell. In the fuel cell utilizing H2, the exhaust gases contain certain amount of unreacted H2, which can not be recovered or utilized economically. However, the gases are combustible and H 2 has to be removed in order to make the gas clean. We have shown high activity of the combustion-synthesized ionic compounds for catalytic combustion of H2. All the compounds showed high activity for H2 combustion and complete removal of H2 was possible. The rates were found to increase with an decrease in H2:O2 ratio and complete conversion of H2 was possible within 100 oC with air. A mathematical model was developed for the kinetics of catalytic H2 combustion based on the elementary processes that were proposed using the spectroscopic evidences. CO tolerant capacity of the catalysts was also tested. It was found that the temperature requirement for most of the catalysts increased with the introduction of CO. However, it was still possible to obtain complete conversions within 200 oC. To summarize, fuel cell processing systems utilizing H 2 remained central to the study. Treatment of the gases, both before and after reaction from the fuel cell was carried out over noble metal-substituted ionic catalyst, synthesized by solution combustion technique. Mechanisms of the reactions were proposed on the basis of spectroscopic evidences and the kinetic rate parameters were estimated using non-linear regression.

Les piles à combustible, alimentée par de l’hydrogène, représentent une solution prometteuse pour limiter la pollution. L’une des alternatives économiques envisagées à court et moyen terme est de produire l’hydrogène à partir d’un carburant tel que le méthane ou le bio-éthanol. Cette transformation a pour objectif d’obtenir un mélange de gaz riche en hydrogène avec une très faible teneur en CO, ce dernier étant un poison pour les piles de type PEM. La réaction de Water-Gas Shift (WGS) est une étape clé du procédé ; elle convertit CO en CO2 par réaction avec l’eau et fournit une quantité d’hydrogène supplémentaire. Des catalyseurs métalliques (Pt, Pd, Ru, Rh, Au, Cu) supportés sur des oxydes (CeO2, TiO2, ZrO2, Fe2O3, CeO2/Al2O3) ont été comparés dans des conditions de WGS identiques en présence de CO2 et H2. Une étude cinétique a été réalisée sur les catalyseurs Pt/CeO2, Au/CeO2, Pt/TiO2 et Au/TiO2. Les énergies d’activation apparentes et les ordres de réaction ont été déterminés à partir d’un modèle de type loi de puissance. Un mécanisme réactionnel avec deux sites a été proposé pour décrire les différentes activités des 4 catalyseurs. Des expériences de désorption programmée en température ont été réalisées pour déterminer les paramètres cinétiques sur le support / The Fuel Cells are promising solution to reduce the air pollution. One of the cost-efficient alternatives is to produce hydrogen from another fuel such as methane or bio-ethanol. A hydrogen fuel processor consists in generating a hydrogen-rich mixture and reducing the carbon monoxide content, as PEM fuel cells are very low CO tolerance. One of these units is the water-gas shift reactor, which converts CO into CO2 by the reaction with water and provides additional hydrogen. Catalysts based on a metal (Pt, Pd, Ru, Rh, Au, Cu) supported on an oxide (CeO2, TiO2, ZrO2, Fe2O3, CeO2/Al2O3) were compared for the WGS reaction in the same conditions and in the presence of CO2 and H2. A kinetic study was conducted on catalysts Pt/CeO2, Au/CeO2, Pt/TiO2 and Au/TiO2. A power law rate model was used to determine apparent activation energies and reaction orders. A dual-site reaction mechanism was proposed to explain the different activities between the four catalysts. The sorption parameters of H2O and CO2 on the supports was quantitatively determined from temperature-programmed desorption experiments

Diploma thesis is oriented on the question of the fate and occurence of mercury and its derivatives in water ecosystems. At first, deep literature review will be worked out. At second, the optimal analytical procedure for the determination of mercury alkylderivatives in water ecosystem compartments will be proposed and verified. At third, real samples from selected water ecosystems will be taken and analyzed.

The Diploma thesis contains design of plumbing and gas installations in a pension. The theory solves warming of water, ways of warming, and dimensioning according to ČSN 06 0320. The calculation part solves variants of hot water preparations and installations of sewerage water. The practical part contains a design and a projekt of plumbing and gas installations.

No description available.

No description available.