The goal for this master thesis is to develop a prototype that uses ultra-wideband (UWB) communications to wirelessly transfer electrocardiogram (ECG) data from an ECG measurement unit to an Android device (smartphone or similar) which is used to process and display the ECG signals. The prototype should consist of two hardware nodes; (1) Node one having a ECG measurement unit (an AD8232 single lead heart rate monitor), an UWB communication module (a Decawave DWM1000 module) and a microcontroller (an Arduino DUE); and (2) Node two having an Android device (an Android smartphone), an UWB communication module (a Decawave DWM1000 module) and a microcontroller (an Arduino DUE). On Node one the AD8232 monitor for ECG measurements is connected to an analog input (with an analog to digital converter (ADC)) on the Arduino and the DWM1000 module is connected to the Arduino via serial peripheral interface (SPI). On Node two the DWM1000 is connected to the Arduino via SPI to receive ECG data from Node one, and the Arduino is connected to the smartphone through a serial USB cable with an USB on-the-go adapter to send the ECG data to the smartphone, where it is filtered and displayed with an Android application. The application has the potential to add, for example, ECG analysis for diagnosing heart activities with artificial intelligence (AI) and further transmit the ECG data for remote medical care. The Arduino is programmed in Arduino IDE (integrated development environment) to handle ECG measurements and UWB communications (transmitting and receiving ECG data), which is limited to a single UWB channel because of limitations of the DWM1000 module. The Android application is created using Android studio, and it can process (with a notch filter) and display 1-12 channel ECG. The prototype has been built and tested. The results show that a single lead ECG measurement can be sent via UWB communication to a smartphone to display in real time. Multiple data channels (1-12 analog inputs on the Arduino) can be multiplexed, transmitted and displayed in real time. This thesis concludes that UWB has huge development potential, and will likely be used for various wireless devices in the future.

Timing offsets result from the use of real clocks that are non-ideal in sampling intervals. These offsets also known as timing jitter were shown to degrade the performance of the two forms of UWB systems impulse radio and orthogonal frequency division multiplexing (OFDM)-based UWB. It was shown that for impulse radio, timing jitter distorts the correlation property of the transmitted signal and the resulting performance loss is proportional to the root-mean-square (RMS) value of the timing jitter. For the OFDM-based UWB, timing jitter introduced inter-channel interference (ICI) and the performance loss was dependent on the product of the bandwidth and the RMS of the timing jitter. A number of techniques were proposed for mitigating the performance degradation in each form of UWB. Specifically, for impulse radio, the methods of pulse shaping and sample averaging were provided, whereas for OFDM-based UWB, oversampling and adaptive modulation were given. Through analysis and simulation, it was shown that substantial gain in signal power-to-noise ratio can be achieved using these jitter-reduction methods.

No description available.

Passive sensors that vary its impedance per measured parameter may be used with surface acoustic wave (SAW) reflective transducers (SRT) for wireless acquisition of the measurand. The device is composed of two transducers, where one, which may be attached to an antenna, is used to launch the wave within the device substrate, and the other is where the sensor load is attached to. The latter is able to reflect the incident wave. How much power is reflected is determined by the attached sensor load. Amplitude variations as well as peak frequency variations of the SRT reflectivity response are explored in this thesis. SAW passive temperature sensors with an orthogonal frequency coded (OFC) time response were previously investigated and prove to be ideal for use in harsh environments. Each sensor is distinguishable from the other due to the OFC code embedded within its time response. However, this coding technique poses a difficulty in designing antennas for the sensor due to its inherently wide bandwidth, and capacitive, non-uniform input impedance. This work covers antenna design and testing for the 250MHz wireless temperature acquisition prototype with a 28% fractional bandwidth, and for the 912MHz system which has 10% fractional bandwidth. Apart from the tag, antennas for the transmitter and receiver were designed for 50 Ohm matching with the required bandwidth maintained. Wireless temperature acquisition runs for the 250MHz prototype were successfully performed and show good agreement with measurements made by a thermocouple. Since a transceiver for the 912MHz system is not complete, the performance of the antennas was gauged by observing the signal transmitted wirelessly by the SAW tag and by comparing this with the sensor time response measured directly by a vector network analyzer.

Millions worldwide cannot tell when their bladder is nearing total capacity. The catheter, a tube to empty the bladder, is a vital part of life for many people. A catheter is, however, not a comfortable option, and it is the most common cause of infection in people staying in hospitals. This thesis aims to make the process more comfortable and non-invasive. The proposed idea is to use a UWB radar system with Vivaldi antennas to monitor the bladder state. Research shows that UWB radars can see a difference between a full and an empty phantom bladder. However, current research that explores the usage of UWB radar systems to monitor the bladder state does not consider regulations other than the ones set by FCC. They also only perform experiments on a phantom bladder. This thesis investigates the practical viability of using a UWB radar system designed per the restricted regulations set by Post- och Telestyrelsen. The thesis includes the design, simulations,manufacturing, and testing of the antennas as well as the radar system. The goal was to test the system in both simulations, with a phantom model and with a human body as a target, to advance the current state of research and determine its practicality forreal-life applications. The simulations showed a significant difference in reflections between full and empty bladders. The measurements from the experiments showed a slight difference in amplitude as well, although not as great as predicted due to a longer pulse. The Vivaldi antennas performed as expected according to both theory and simulations and they should work as desired in further experiments that use a UWB radar to monitor the bladder state per the PTS regulations. This thesis is solely based on an original idea and has not been influenced or derived from any external company.

No description available.

No description available.

This research considers the problem of cooperatively identifying the active bands in a wideband spectrum using the sparse Fast Fourier Transform (sFFT). Existing research has focused primarily on Compressed Sensing (CS) and Multi-Coset (MC) sampling, but recent developments in the sFFT have shown that a sparsely occupied spectrum can be efficiently reconstructed using multiple co-prime analog-to-digital converters (ADC) that sample below the Nyquist rate. Specifically, this research utilizes the Robust Fast Fourier Aliasing-based Sparse Transform (R-FFAST) and extends this algorithm for use in cooperative wideband spectrum sensing (CWSS). Unlike previous approaches that implement the sFFT for spectrum sensing, the R-FFAST framework was developed and analyzed using the mutual coherence and the restricted isometry property (RIP) from CS theory. This leads to reliable support estimation in the presence of additive white Gaussian noise (AWGN) while mitigating the computational complexity of CS reconstruction algorithms. This research makes the following contributions. First, this research extends the signal model from single tones to multi-band signals with clustered support. Second, it shows that each stage in the R-FFAST front-end can be decomposed into individual nodes that form a fully distributed cooperative network. Lastly, this research empirically develops a constant false alarm rate (CFAR) detector that is used to identify the active frequency bins during the reconstruction process. The primary result of this research is showing that reliable spectrum detection is only possible when the average sampling rate of the cooperative network is greater than or equal to the sparsity of the spectrum. Simulation results are provided to demonstrate the effectiveness of the proposed framework and validate the findings of this research. / Electrical and Computer Engineering

ITC/USA 2006 Conference Proceedings / The Forty-Second Annual International Telemetering Conference and Technical Exhibition / October 23-26, 2006 / Town and Country Resort & Convention Center, San Diego, California / The transition of PCM recording from analog to digital recorders was completed at many test ranges more than a decade ago as marked by delivery of data on S-VHS tape, CD-ROM, DVD, ZIP disc, JAZ disc, 8mm tape and DLT tape for low rate data and D-1 cassettes for high rate data. Data then quickly began distribution via the internet and other networks. Analog recorders have remained a necessary legacy for the long transition to convert from analog to digital (PCM) data transmission from the test vehicles. However, the new digital recorder capabilities have removed this requirement to convert the transmissions from the test vehicle. Analog signal and predetection recording on digital recorders has been successfully demonstrated at costs below the existing analog recorders. Application of new techniques in a methodical transition program to the new digital recorders has proven the many benefits of recording wider bandwidths with excellent repeatability. Repeatability issues are primarily in the very low error sources of the processing system because the major analog error sources of the analog tape recorders, analog time code readers, analog demodulators, etc have been greatly reduced. This paper provides test results of recording higher signal rates and bandwidths of the new programs and describes the techniques and implementation through procedures of the Western Range transition from analog to digital recorders. Surprising results show predetection and analog signal recording costs are nearly the same as PCM recording costs due to the price of deliverable media with respect to mission recording requirements.

Along with rapid development of sensing and communication technology, Internet of Things (IoTs) has enabled a tremendous number of applications in health care, agriculture, and industry. As the fundamental element, the wireless sensing node, such as radio tags need to be operating under micro power level for energy autonomy. The evolution of electronics towards highly energy-efficient systems requires joint efforts in developing innovative architectures and circuit techniques. In this dissertation, we explore ultra-low power circuits and systems for micropower wireless sensing in the context of IoTs, with a special focus on radio interfaces and sensor interfaces. The system architecture of UHF/UWB asymmetric radio is introduced firstly. The active UWB radio is employed for the tag-to-reader communication while the conventional UHF radio is used to power up and inventory the tag. On the tag side, an ultra-low power, high pulse swing, and power scalable UWB transmitter is studied. On the reader side, an asymmetric UHF/UWB reader is designed. Secondly, to eliminate power-hungry frequency synthesis circuitry, an energy-efficient UWB transmitter with wireless clock harvesting is presented. The transmitter is powered by an UHF signal wirelessly and respond UWB pulses by locking-gating-amplifying the sub-harmonic of the UHF signal. 21% locking range can be achieved to prevent PVT variations with -15 dBm injected power. Finally, radio-sensing interface co-design is explored. Taking the advantage of RC readout circuit and UWB pulse generator, the sensing information is directly extracted and transmitted in the time domain, exploiting high time-domain resolution UWB pulses. It eliminates the need of ADC of the sensor interface, meanwhile, reduces the number of bits to be transmitted for energy saving. The measurement results show that the proposed system exhibits 7.7 bits ENOB with an average relative error of 0.42%. / <p>QC 20160412</p>