Ce travail de thèse s’est déroulé dans le cadre d’une convention CIFRE entre mon laboratoire de rattachement C3S (EA4660) et le département Recherche et Développement (R&D) de l’équipe cycliste professionnelle FDJ. Les différentes études que nous avons conduites se sont articulées autour de l’amélioration de la performance sportive chez le cycliste à travers une variable centrale qui est la puissance mécanique qu’il développe lors de la locomotion (Pméca) selon deux axes principaux : 1) l’évaluation et le suivi du potentiel physique avec pour but l’amélioration du processus d’entraînement et 2) l’optimisation de l’interface homme – machine à partir de l’analyse du matériel et des équipements utilisés par les cyclistes dans l’équipe FDJ. / This thesis has been completed as part of a CIFRE agreement between the laboratory C3S(EA4660) and the Research and Development (R&D) department of the FDJ professionalcycling team. The various studies that we conducted centred on analysing sport performanceoptimisation in cyclists through a central variable: the mechanical power output (PO)developed during locomotion. There were two main areas of focus: 1) evaluation andmonitoring of physical potential, with the aim of improving the training process, and 2)optimisation of the human–machine interface via analysis of the materials and equipmentused by the FDJ team cyclists

Dans cette thèse, l’étude des interactions entre des particules ultrafines émises par les pots d’échappement et l’écoulement de sillage créé par le véhicule émetteur a été réalisée principalement selon une approche numérique. Une campagne expérimentale a été conduite à des fins de validation. L’objet de la thèse vise à comprendre l’impact des particules issues des pots d’échappement sur l’environnement proche tant du côté piéton que du côté des passagers des véhicules suiveurs. Pour cela, l’écoulement du fluide a été traité avec une approche eulérienne type URANS (Unsteady Reynolds Average Navier-Stokes) combinée à un suivi lagrangien pour les nanoparticules. En effet, cette thèse est conduite en parallèle d’un projet collaboratif financé par l’ADEME (CAPTIHV) dont le but est d’évaluer la qualité de l’air des habitacles des véhicules automobiles, et en particulier de l’infiltration des particules ultrafines issues du trafic environnant. L’étude de la dispersion des particules fines en écoulements turbulents nécessite une analyse fine des structures turbulentes qui s’y développent. Notre étude numérique a donc consisté, en premier lieu, à analyser cette dispersion dans le cas d’un écoulement de sillage classique à l’aval d’un cylindre. Cela nous a permis de caractériser la dynamique d’interactions de nanoparticules solides de carbone avec les structures tourbillonnaires en considérant l’impact de la turbulence et de la diffusion brownienne. Cela a permis d’évaluer l’influence des principaux mécanismes influençant la dispersion. Les résultats de ces simulations nous ont permis de sélectionner les mécanismes/forces importants pouvant influencer la dispersion de telles particules dans le sillage d’un véhicule automobile ; Cela nous a facilité la mise en place et l’analyse des simulations relativement plus complexes de l’aérodynamique du corps d’Ahmed à culot droit en présence des nanoparticules simulant les suies des gaz d’échappement. Les interactions des particules ultrafines avec les structures tourbillonnaires se créant dans le sillage des véhicules ont été évaluées à partir de profils de concentrations et les coefficients de dispersions transversales. La dernière étape a consisté en une campagne d’essais en soufflerie qui nous a permis de caractériser les champs de vitesses moyens et turbulents ainsi que les champs de concentrations particulaires à l’aval du véhicule pour valider les résultats numériques / In this thesis, the study of the interactions between ultrafine particles emitted by the exhaust pipes and the wake flow generated by the emitting vehicle was carried out mainly using a numerical approach. An experimental campaign was conducted for validation purpose. The goal of the thesis is to understand the impact of exhaust particles on the surrounding environment on both the pedestrian and the passengers of the following vehicles. For this purpose, the fluid flow was resolved with an Eulerian type URANS model (Unsteady Reynolds Average Navier-Stokes) combined to the Lagrangian approach for the nanoparticles trajectories calculation. This thesis is conducted simultaneously with a collaborative project funded by ADEME (CAPTIHV) whose purpose is to assess the air quality of automotive car cabins, and particulate infiltration from the surrounding traffic in particular of ultrafine particles. The study of the dispersion of fine particles in turbulent flows requires a fine analysis of the turbulent structures that develop in such flows. Our numerical study therefore consisted, first, in analyzing this dispersion in the case of a classic wake flow downstream of a cylinder. This enabled us to characterize the interaction of solid carbon nanoparticles with vortical structures evaluating at the same time the impact of turbulence and Brownian diffusion. This allowed determining the influence of the main mechanisms influencing nanoparticles dispersion. In a second step, we replaced the cylinder configuration by a simplified geometry of a motor vehicle, Ahmed body configuration. Therefore, simulations with and without of particles presence have been conducted and have allowed to highlight the swirls structures and to characterize the particles dispersion through particle concentration profiles and the particles dispersion coefficients. The results of these simulations allowed us determining the important mechanisms / forces that can influence the dispersion of such particles in the wake of a ground vehicle; this facilitated the implementation and analysis of relatively more complex simulations of the aerodynamics of the square back Ahmed body in the presence of nanoparticles simulating soot from the exhaust gases. The interactions of ultrafine particles with vortical structures appearing in the wake of vehicles were evaluated from concentration profiles and transverse dispersion coefficients. The final step was a wind tunnel experimental campaign that allowed us to characterize the average and turbulent velocity fields as well as the particle concentration fields downstream of the vehicle to validate the numerical results

This master thesis focuses on designing of an external six-component balance. This universal concept would provide access of results from different models of wings, aircraft and automobiles with relatively small scales. This work also includes theoretical background needed in aerodynamic testing, analysis of 1D beam element model of scale and explanation of components used in scale. Lastly methods of calibration and measurement in aerodynamic tunnel are described, which can be adopted for this design to achieve the adequate level of accuracy.

The masters thesis is focused on design of the device for measurement of the aerodynamic forces and moments acting on radiators mounted in the wind tunnel test section. The thesis also includes the analysis of the aerodynamic drag which is produced by radiators and the LabView application software development.

Title: Urban Ventilation Dependence on Geometric Configuration Author: RNDr. Ing. Libor Kukačka Department: Department of Atmospheric Physics Supervisor: prof. RNDr. Zbyněk Jaňour, DrSc., Academy of Sciences of the Czech Republic, Institute of Thermomechanics, v. v. i. Abstract: The main goal of the thesis is to investigate the impact of urban geometry on the urban ventilation using wind-tunnel modelling. To measure the pollutant transport, both advective and turbulent, within complex urban geometries with a high temporal resolution a special measurement method was developed. At first, the pollution of a simplified urban area was simulated by a ground-level point source and the ventilation of the intersection with respect to four wind directions was studied. Later, the pollution of other simplified and complex urban areas was simulated by a ground-level line source and the ventilation of three different street canyons with respect to wind direction perpendicular and oblique to their along-canyon axis was investigated. The clear impact of urban complexity and wind direction on street canyon ventilation is demonstrated at lateral and top openings of all investigated canyons and the intersection. Whilst the dominance of the pollutant advection is demonstrated at the eaves of pitched roofs, at the roof ridges...

No description available.

No description available.

<p dir="ltr">Transportation and energy production industries strongly rely on improvements in gas turbine performance. The quantification of these improvements is dependent on the accuracy of the measurements performed during testing. An increase of 0.5\% in efficiency is sufficient to secure a new development program worth millions of dollars, but in the case of temperature measurements, uncertainties below 0.5 K are required, which presents a challenge. This work selects heat flux estimation and total temperature measurement uncertainties as major contributors for efficiency uncertainty.</p><ul><li>Heat flux measurements are critical to evaluate the impact on the efficiency. Additionally, thermal fatigue in turbine airfoils defines the life cycle of the engine core. This work performs an estimation of the heat transfer via a simplified numerical model that uses infrared (IR) measurements in the surface of the casing to predict the temperature of the passage wall. The model is validated with real cool-down data of the turbine to yield results within a 10\% of the actual temperature.</li><li>Total temperature measurement suffers from errors due to heat transfer effects in the probe. Two dominant sources of errors are convection and conduction between the thermocouple wires, the probe support, and the flow. These effects can be treated in two different categories: the velocity error, created by a non-isentropic reduction of the flow velocity upstream the thermocouple junction, and the thermal equilibrium effects between the junction and the probe support, involving heat transfer through the wire to the shield and the probe stem due to temperature differences between each component (the so-called \emph{conduction error}). An open jet stand is used to evaluate the effects of velocity error at various Mach numbers. The conduction error is addressed with the design and manufacturing of dual-wire thermocouple probes. The readings from two wires with different length-to-diameter ratios are used to correct for the flow total temperature. This probe yielded a recovery factor of 0.99 +/- 0.01 at Mach 0.6.</li></ul><p></p>

<p dir="ltr">Burst-mode lasers and burst-mode optical parametric oscillators (OPOs) are applied and developed for planar laser induced fluorescence (PLIF) measurements of key species for high-speed combustion measurements. OH-PLIF in the rotating detonation engine was performed for the first time at wave structure visualization in two different planes and was 10 times faster than any other burst mode OH-PLIF measurements at the time. The same system was used to perform another OH-PLIF experiment at 1 MHz for ~200 pulses to compare key features of the detonation wave structure with computational fluid dynamic simulations and a fundamental detonation tube experiment. The system was also used for seedless velocity measurements in the exhaust by tracking a pocket of OH with a technique called FLASH. A similar OPO was built, aligned, and tuned to perform 1 MHz NO PLIF in a Mach 10 hypersonic tunnel to visualize second mode instabilities and calculate the frequency in the boundary layer transition of a 7-degree cone. A high-efficiency OPO was developed and characterized utilizing the KTP crystal to provide narrow bandwidth pulses for the fluorescence of multiple species. The OPO was pumped at repetition rates up to 1 MHz and was calculated to have a 1.9% UV efficiency from the fundamental 1064 nm output. This is 3 – 5 times increase in efficiency from previous custom and commercial built OPOs. The OPO was applied to the RDC for OH PLIF in the combustor channel and NO PLIF for injector dynamics and response studies. Lastly, a burst-mode laser was used to perform LII on the post detonation blast flow field to measure explosively generated soot. The data was taken at 1 MHz and compared and corrected with a separate set of experiments and computational simulations.</p>

More and more people are using the internet for data processing, transfer, and storage. With it comes a higher demand for computational power from data servers. Unsurprisingly, the data center industry is becoming an increasingly large industry that is important for people’s daily lives. Data centers cover 2 % of the world’s total electrical consumption and this number is expected to become higher. Running data centers with optimal performance while operating efficiently and as sustainably as possible is a task that is of utmost importance.The way data centers are cooled today is through a CRAH unit that features cooling coils and a fan, the fan blows air over cold coils to prevent damage to server components. Another task for this fan is to create a high differential pressure over the servers using this air, to ensure the air flows in the right direction. The air is uniformly distributed over the servers. With dynamic air-handling measures, it is possible to match the cooling for individual servers, because all servers have different workloads. They generate different amounts of heat. This thesis investigates manual redistribution between servers and how an air-handling damper unit, that sits on the server, is designed to investigate how it can reduce total power draw. Different tests are run in a wind tunnel which houses room for six servers whereas three prototypes are mounted on three of the servers. The main idea to test is that instead of running an even amount of stress on six servers, the same amount of stress is redistributed on only three servers. The ones now running idle have a damper unit blocking the server's rear side. That way the CRAH fan is using less power to create the same differential pressure. Also, the total power draw to all servers is reduced as well. One of the tests was the conventional way of cooling servers today and it had a total power draw of 1362 watts. The test with both redistribution, dampers closed at the rear and turned off servers had a power draw of 951 watts. That is a 30% decrease.