This thesis is focused on creation of building information model (BIM) for existing buildings. The main objective of this work is to develop the methodology (workflow) for the creation of BIM model using selected geodetic methods, specifically for the modeling based on the existing documentation of the building, the modeling from the handheld distance meter and the modeling from point cloud acquired by the indoor mapping system. The aim of these workflows is to explore the suitability of these methods, to check the limits of each method and to point out the potential issues. Revit (version 2013 and 2014) was used as an authoring environment for creation of the models. Workflow for modeling based on the documentation of the building shows how to insert drawings into Revit and how to create a model based on these drawings. The workflow was developed based on experience with creation of model of an office building. The workflow for handheld laser distance meter describes how to work with rangefinder equipped with Bluetooth, which allows user to create a model onsite. The third part of this thesis deals with creation of BIM from pointcloud acquired by indoor mobile mapping system. The workflow describes data collection and point clouds processing directly in Revit using the ScanToBIM extension. The results of this work are methodical instructions for the methods described above and the comparison of these methods. Workflows contain recommended procedures and highlight common issues and mistakes. This should enable the readers of this thesis to choose the right method and avoid common mistakes.

Master´s thesis is focused on problems of optimizing of industry processes. Main objective was to analyze a company and project a improvement of industry process with costs saving. In the first part are recapitulated a generic knowledge about approaches of improving of industry processes. Second part is engaged in analyze of company ORTHPOM bratři Škodové spol. s r.o.. In the fine chapter is presented concept of revisions in industry process and possibilities of other optimalizations.

E-government, electronic Public Administration, has led to streamlined work processes within and between government departments. As theories of administration and management seek to improve processes, electronic administration seeks to improve electronic processes in an effort to provide efficient services. The unique contribution of this study on Public Administration and the related e-government initiatives of the Government Employees Pension Fund is that none of this research has been documented before. Whilst e-government is not new, its application to the Government Employees Pension Fund is novel. E-government espouses integrated partnerships between governments and e-citizens by creating an understanding of electronic relationships between and within organisations. The thesis considers electronic Public Administrative service delivery in the Government Employees Pension Fund as it relates to civil pensions administration. Successful e-government needs a critical mass of users that is central to ensuring its sustainable and successful utilisation. If a critical mass of users is not ensured then e-government initiatives will not be successful. Attempts by the Government Employees Pension Fund to develop a customer relationship management approach are assessed. Sustainable and successful e-service delivery is about providing multi-nodal access to clients. An interactive web site, amongst others, will allow clients to access services remotely. Seamless government is developed around customers’ needs and is outward looking since it provides a single access point for all services offered by government. Gaining access to information and communications technologies is a challenge that many face, hence the digital divide is a stymieing factor in providing seamless, successful e-government services. Not all e-government initiatives are successful. Information and communications technology initiatives are not always implemented according to planned timelines and budgets. The case of the Government Employees Pension Fund proved to be no different given that not all the e-government initiatives embarked upon were successful. / Thesis (PhD (Public Affairs))--University of Pretoria, 2007. / School of Public Management and Administration (SPMA) / unrestricted

Many Greek and Latin papyri, originally belonging to only one book (be it in roll or codex form), are currently scattered among different libraries. While it is not possible to physically rejoin these fragments as they cannot be moved from their institutions, they may be virtually reunited thanks to the techniques of digitisation, image processing and electronic publishing. This paper focuses on some issues – emerged from the work of my MA dissertation – that virtual reunification of Greek and Latin papyri presents. Firstly, I propose a workflow for the creation of a digital edition of virtually rejoined fragments, by applying the model of virtual reunification recently suggested by R. Punzalan in Understanding Virtual Reunification (2014), the first systematic study on this topic. Also, as a principal reference point among the existing projects, I follow the Sinaiticus Project website, which, similarly, deals with an ancient Greek manuscript now dispersed in different institutions; however, while the Sinaiticus Project is exclusively dedicated to that artefact, the edition here proposed includes the possibility to be widened, in order to allow researchers to possibly include more reunified papyri in the future. Secondly, I propose some recommendations that can be followed by the owning institutions in order to digitise their fragments according to a common strategy. Finally, I focus on how a virtual reunification of papyrus fragments can be technically achieved – in other words, how the transcription code can present unified information about the papyrus as a whole and mark the parts of text belonging to each fragment. This project will hopefully help researchers study papyri divided among different libraries in a more systematic way, thanks to the availability of an electronic edition including the whole text and images of the virtually reunited fragments, and thanks to a consolidation of metadata.

Das Ziel des RAfEG-Projektes bestand in der Entwicklung einer Referenzarchitektur "E-Government", die die notwendigen Komponenten zur Realisierung informations- und kommunikationstechnischer Systeme (IuK-Systeme) für typische Prozesse in nachgeordneten Behörden der Innenministerien der Bundesländer bereitstellte. Die Architektur RAfEG stellt einen ganzheitlichen Ansatz dar, der viele wesentliche Aspekte, beginnend mit der formalen Beschreibung der fachlichen Zusammenhänge bis hin zur Entwicklung von verteilt agierenden Softwarekomponenten behördlicher Geschäftsprozesse umfasst. Die Architektur liefert unter Berücksichtigung hardwareseitiger Voraussetzungen die Struktur von Softwarekomponenten zur Verwaltungsautomatisierung. Die Architektur RAfEG wurde als räumlich verteiltes komponentenbasiertes Softwaresystem entworfen. Dabei war es notwendig, Konzepte zur effizienten Nutzung von heterogenen Systemen für interaktive Anwendungen im Bereich E-Government zu entwickeln. Die prototypische Umsetzung der Architektur erfolgte für Planfeststellungsverfahren/Plangenehmigungsprozesse am Beispiel des Regierungspräsidiums Leipzig. Das Vorhaben war geprägt von der Entwicklung eines durchgängigen Konzeptes zur optimalen IuK-technischen Unterstützung von Verwaltungsprozessen. Dies führte von der Modellierung der fachlichen Zusammenhänge (Fachkonzept) über die entwicklungsorientierte, methodische Abbildung der zu implementierenden Sachverhalte (Datenverarbeitungskonzept) bis zur komponentenbasierten Softwareentwicklung (Implementierungskonzept). Dieses Konzept mündete in einer Referenzarchitektur für typische E-Government-Prozesse. Dazu wurden neben den rein fachlichen, aufgabenbezogenen Aspekten insbesondere Sicherheitsaspekte sowie technische und organisatorische Schnittstellen ausführlich betrachtet. Der durchgängige Einsatz von Open Source Software führt hierbei zu einer kosteneffizienten, flexiblen Referenzlösung, die durch ihre komponentenbasierte Struktur als weiteren Aspekt sehr gut an spezielle Anforderungen anpassbar ist.

Im Projekt TransBS wurden existierende, über viele Jahre gewachsene Softwaresysteme zur Realisierung von Geschäftsprozessen betrachtet, in denen Aspekte wie Verteiltheit, Anpassbarkeit an heterogene Plattformen oder Skalierbarkeit zunehmend Bedeutung erlangen. Die notwendigen Anpassungen der Systeme sind nur schwierig und mit erheblichem Aufwand zu realisieren, da sie eine vollständige Reorganisation erfordern. Deshalb wurde im Projekt eine Methodik entwickelt und prototypisch realisiert, die monolithische Legacy-Business-Softwaresysteme in eine komponentenbasierte, verteilte Client-Server-Architektur mit konfigurierbaren Workflows für heterogene Plattformen schrittweise überführt. Die entwickelten Werkzeuge zur Transformation wurden exemplarisch mit einem gegebenen Softwaresystem evaluiert und können für weitere Problemstellungen der Analyse und Transformation von Business-Software eingesetzt werden.

A well-structured and coordinated information management practice is central to promoting efficiency in construction. Building information management encompasses authoring, interpretation, communication, coordination and storage of building information. The benefits envisioned by utilizing IT developments such as Building Information Modelling (BIM) in the facility management and operations (FM&amp;O) sector are estimated to be far greater than in other sectors. There is, however, a gap between the knowledge available in the field of building information management and the actual demands of the architectural, engineering, construction and operation (AECO) industry, especially the FM&amp;O sector. The overall aim of this qualitative research is to develop knowledge that conceptualizes the lifecycle supporting implementation of BIM in the AECO industry with a focus on its implications for a BIM-enabled FM&amp;O practice. This applied research comprises a number of summative and formative components: paper 1 investigates the existing and emerging information management systems for the FM&amp;O sector and their characteristics. The focus of paper 2 is narrowed down to the technical requirements on building information management systems; while its temporal scope spans the entire lifecycle of buildings. Paper 3 is a further elaboration on the findings of paper 1 and covers the technical requirements of BIM-implementation in the FM&amp;O sector. Paper 4 investigates workflows – another category of the issues identified in paper 1. Paper 1 aims to provide a general understanding of the importance and implications of implementing BIM-enabled systems in the FM&amp;O sector and also identifies the main categories of the issues associated with this approach. This literary paper reports on a basic research with a descriptive approach and builds upon the information from a non-exhaustive set of literature. In this paper, workflows, contracts and information technology have been identified as three categories of the issues associated with implementing BIM-enabled systems in the FM&amp;O sector. Paper 2 is also a literary research which draws on the notion of BIM repositories and aims to clarify the technical requirements for a more collaborative building industry as well as depicting the current status of building knowledge management technologies, recent trends and future prospects. Open format BIM repositories have been suggested as the cornerstones of an integrated information management system for AECO firms. The aim of paper 3 is twofold: firstly, to summarize the current status of the building information management technologies applied in the facility operation activities and identifying prevailing issues; secondly, to devise some technical solutions for those issues based on a case project. In the first part of this study, a summarized description of information management configurations in eleven projects were extracted from literature and the technical issues within those systems were identified. Moreover, five major categories of contemporary technical solutions for enhancing information transfer from BIM to FM&amp;O software were designated. Then, a narrative and illustrative representation and reconstruction of an IT-implementation project was developed. Paper 4 is another literary study which aims to provide the theoretical basis for more focused studies on existing and desired processes in the FM&amp;O sector and their associated information transactions. In this paper, firstly, the more common definitions of the key concepts have been revisited and discussed. Then, the generic types of the processes, activities and organizational roles common to FM&amp;O firms, the types of information required by each actor and how such information are acquired have been presented. / <p>QC 20150423</p>

Digitalisering är ett aktuellt ämne i dagsläget och teknologin har vuxit samt påverkat samhället. Det har påverkat ekonomer och deras arbetssätt. Det förekommer flertalet studier angående hur digitalisering påverkar ekonomrollen inom privat sektor, forskning kring ekonomernas egna erfarenheter och inom den offentliga sektorn är dock fåtalig. Offentlig sektor har kritiserats då den tekniska utvecklingen inte går framåt i den takt som övriga samhället. Detta då de har strukturer som försvårar införandet av moderniseringsarbete. Syftet med studien är att kartlägga och analysera erfarenheter med digitalisering samt möjligheter och utmaningar kring det utifrån ekonomers perspektiv. Studien har genomförts genom en kvalitativ metod där datainsamlingen gjordes på två offentliga organisationer genom sex semistrukturerade intervjuer. Digitalisering resulterar i att analog information skiftar till att bli digitaliserade. Den förbättrar den interna effektiviteten genom att effektivisera arbetsprocesser genom att eliminera manuella hanteringar och reducera de mänskliga felen. Ekonomistyrsystem handlar om att påverka beteendes hos medarbetarnas, men även chefernas beteende i organisationen. Studiens empiriska resultat visar att digitalisering har bidragit till en övergång från det analoga till det digitala. Det visar även att digitaliseringen har effektiviserat arbetsprocesser inom organisationerna. Vad gäller ekonomistyrningen i organisationerna har studien identifierat att det i arbetssättet främst råder en kombination av resultat- samt handlingsstyrning i organisationerna. Slutsatserna som studien presenterar är att fördelarna med digitalisering är att det har lett till effektivare arbetsprocesser och frigjort tid till mer kvalificerade arbetsuppgifter. Möjligheterna är att effektiviseringen leder till att mer fokus kan sättas på att hantera med kvalificerade arbetsuppgifter som faktiskt kräver det mänskliga ögat och minska de mänskliga felen. En nackdel är att ekonomerna inte besitter IT- kompetensen, och behöver ta hjälp av IT-avdelningen, vilket i sig är en utmaning då det uppstår utmaningar gällande kommunikationen. På grund utav detta upplever ekonomerna detta att systemen inte alltid är optimala att hantera utifrån deras arbetsuppgifter. Ytterligare en nackdel med digitaliseringen är att den påverkar den sociala kontakten och den kreativa förmågan negativt till följd av fler digitala möten istället för att träffas fysiskt. / Digitalization is a current topic at present and technology has grown and affected society. It has affected economists and their way of working. There are several studies regarding how digitalization affects the role of economists in the private sector, research on economists' own experiences and in the public sector is, however, few. The public sector has been criticized as technological development does not progress at the pace of the rest of society. This is because they have structures that make it difficult to introduce modernization work. The purpose of the study is to map and analyze experiences with digitization as well as opportunities and challenges around it from the perspective of economists. The study was conducted through a qualitative method where data collection was done on two public organizations through six semi-structured interviews. Digitization results in analog information shifting to being digitized. It improves internal efficiency by streamlining work processes by eliminating manual handling and reducing human error. Management control systems are about influencing the behavior of employees, but also managers' behavior in the organization. The empirical results of the study show that digitization has contributed to a transition from the analog to the digital. It also shows that digitalization has streamlined work processes within organizations. With regard to management control in the organizations, the study has identified that there is both results control and action control in the organizations. The conclusions that the study presents are that the advantages of digitization are that it has led to more efficient workflow processes and freed up time for more qualified tasks. The possibilities are that the streamlining leads to more focus being placed on dealing with qualified tasks that require the human eye and reduce human errors. A disadvantage is that economists do not possess IT skills, and need the help of the IT department, which is a challenge as challenges arise regarding communication. Due to this, economists experience that the systems are not always optimal to handle based on their tasks. Another disadvantage of digitalization is that it negatively affects social contact and creative ability as a result of more digital encounters instead of meeting physically.

The thesis presents an analysis of the ten administrative procedural document flows, by which was developed and implemented a workflow system in the company Plzeňská teplárenská, a.s. Analysis processes are: Purchase requirement, Income invoice, Supply contract, Tender, Investment plan, Customer contract, Decommissioning of property, Travel order, New employee, Output sheet. Analysis of each process contains a description of the process with diagram circulation of documents and table with data that arise in individual steps. Analysis and reengineering of choosing processes took place on the basis of the decision of the company management. During of implementation appear number of problems resulting from the large scale of the project, from the shortcomings in the analysis, the lack of users and small support leadership, which led to the extension of the period projects to double the planned time. Currently, the system is in routine operation and brought all of the anticipated effects. An unexpected added value is auto-linking related documents in different agendas by using hyperlinks Powered by TCPDF (www.tcpdf.org)

En la actualidad las empresas pymes distribuidoras presentan algunos inconvenientes en el mercado, porque no pueden competir con éxito algunos factores como sus precios, logística o calidad de los productos, entre otras características con las empresas. Asimismo, estas empresas les falta enfocarse en los procesos pre o post el pedido de compra del cliente. Antes de cumplir 2 años activos en el mercado peruano, el 82.5 % de las empresas pymes se disuelven. La empresa en la que se enfoca este trabajo se llama es especializada en la distribución de herramientas manuales, eléctricas y neumáticas, la cual fue analizada para identificar los problemas principales y las posibles causas. En la lectura y análisis de los artículos científicos encontrado, se plantea una metodología de mercadotecnia llamada Inbound Marketing, en la cual se modificado y adecua para el caso de estudio del presente trabajo.  Por otro lado, se ha utilizado herramientas como clasificación ABC, flujo de trabajo y metodología de Inbound Marketing como estructura de la metodología propuesta para poder solucionar el problema de ventas insuficiente. Se ha analizado que las causas principales de esta problemática de diferentes pymes es el bajo índice de conversión de cotizaciones a ventas, lo cual genera el poco rendimiento e impacto económico negativo. Al finalizar la implementación de esta metodología, se refleja un incremento en el porcentaje de eficiencia del desarrollo de cotizaciones y un aumento en el índice de rendimiento de estos. En conclusión, se puede medir el impacto monetario de la implementación que ha sido beneficioso para la empresa en estudio, el rendimiento que se obtuvo en el último mes de implementación fue el aumento en un 10 %. Por ello, se recomienda realizar esta propuesta para adaptarla a situación actual de cualquier pyme. / Currently, SMB distribution companies have some drawbacks in the market because some factors such as their prices, logistics or product quality, among other characteristics with companies, cannot compete successfully. These companies also need to focus on the pre or post processes of the customer's purchase order. 82.5% of SME companies disappear before two years of market existence. The company is a specialized in the distribution of manual, electrical and pneumatic tools, which was analyzed to identify the main problems and possible causes. In the reading and analysis of the scientific articles found, a marketing methodology called Inbound Marketing is proposed, in which it is modified and adapted for the case of study of this work.  On the other hand, tools such as ABC classification, workflow and Inbound Marketing methodology have been used as the structure of the proposed methodology to be able to solve the insufficient sales problem. It has been analyzed that the main causes of this problem of different SMEs is the low rate of conversion of quotes to sales, which generates the low yield and negative economic impact. At the end of the implementation of this methodology, an increase in the percentage of efficiency of the development of quotes and an increase in the rate of return of quotes is reflected. In conclusion, you can measure the monetary impact of the implementation that has been beneficial to the company under study, the performance obtained in the last month of implementation was the increase by 10%. It is therefore recommended that this proposal be made to adapt it to the current situation of any SME. / Tesis