Nanotechnology offers a great potential do design fertilizers with unique properties capable to boost the plant productivity. However, the nanoparticles environmental fate and their toxic responses still need to be deeply investigated to their safe use. This study aims to investigate the effect of copper oxide (nCuO) and magnetite nanoparticles (nFe3O4) on the germination and seedling development of Phaseolus vulgaris L. Seeds were treated in nanoparticles dispersions in a wide range of concentrations (1, 10, 100 and 1 000 mg L-1) and incubated in a germination chamber during 5 days. Different sized nCuO (25, 40 and <80 nm) and polyethylene glycol (PEG) coated nFe3O4 were evaluated. Although both nCuO and nFe3O4 treatments did not affected the germination rate, seedling weight gain was promoted by 40 nm CuO at 100 mg Cu L-1 and inhibited by 1 000 mg Cu L-1 of 25 nm CuO and positive control (CuSO4). Among the tested nCuO, the higher chemical reactivity was found for the 25 nm CuO, and this may partially explain the observed deleterious effects. Seeds treated in nFe3O4-PEG at 1 000 mg Fe L-1 increased radicle elongation compared to the negative control (water), while Fe2+/Fe3+ (aq) (positive control) and bare nFe3O4 at 1 000 mg Fe L-1 treatments reduced the radicle of the seedlings. The growth promoted by the PEG-coated nanoparticles can be justified by the higher water uptake induced by the PEG, and also by its lower chemical reactivity compared to the bare nanoparticles. This was reinforced by enzymatic assays since nFe3O4-PEG treatment was also the least harmful to the alpha-amylase activity. X-ray fluorescence spectroscopy (XRF) showed that most of the Cu and Fe incorporated by the seeds remained in the seed coat, specially in the hilum region, and X-ray tomography indicated that Fe3O4-PEG penetrated in this structure. X-ray absorption spectroscopy (XAS) unraveled that the Cu and Fe chemical environment of the nCuO and nFe3O4-PEG treated seeds persisted mostly in its primitive form. These results contribute to the understanding of how nCuO, nFe3O4 and nFe3O4-PEG interact with common bean seeds and seedlings and highlights its potential use in seed priming / A nanotecnologia oferece um grande potencial para o desenvolvimento de fertilizantes com propriedades únicas, capazes de impulsionar a produtividade das plantas. Contudo, o destino ambiental e os efeitos tóxicos das nanopartículas ainda necessitam ser profundamente investigados para o seu uso seguro. Este estudo visa investigar o efeito das nanopartículas de óxido de cobre (nCuO) e magnetita (nFe3O4) na germinação e desenvolvimento das plântulas de Phaseolus vulgaris L. As sementes foram tratadas em dispersões de nanopartículas em diversas concentrações (1, 10, 100 and 1 000 mg L-1) e incubadas em uma câmara de germinação durante 5 dias. Diferentes tamanhos de nCuO (25, 40 e <80 nm) e nFe3O4 recoberta com polietileno glicol (PEG) e foram avaliados. Embora ambos tratamentos de nCuO e nFe3O4 não afetaram a taxa de germinação, o ganho de massa das plântulas foi promovido pela nCuO de 40 nm à 100 mg Cu L-1 e inibido pelos tratamentos de nCuO de 25 nm e controle positivo (CuSO4) à 1 000 mg Cu L-1. Dentre as nCuO testadas, a maior reatividade química foi encontrada para a nCuO de 25 nm, e isso pode explicar parcialmente os efeitos deletérios desta nanopartícula. Sementes tratadas com nFe3O4-PEG à 1 000 mg Fe L-1 aumentaram o alongamento das radículas em comparação ao controle negativo (água), enquanto que os tratamentos Fe2+/Fe3+ (aq) (controle positivo) e nFe3O4 sem recobrimento à 1 000 mg Fe L-1 reduziram as radículas das plântulas. O crescimento promovido pelas nanopartículas recobertas com PEG pode ser justificado pela maior absorção de água induzido pelo PEG, e também pela sua baixa reatividade química comparada às nanopartículas sem recobrimento. Isso foi reforçado por ensaios enzimáticos uma vez que o tratamento de nFe3O4-PEG foi também o menos prejudicial à atividade da alfa-amilase. A espectroscopia de fluorescência de raios-X (XRF) mostrou que a maior parte do Cu e do Fe incorporados pelas sementes permaneceu no tegumento, especialmente na região do hilo, e a tomografia de raios-X indicou que nFe3O4-PEG penetrou nesta estrutura. A espectroscopia de absorção de raios-X (XAS) revelou que o ambiente químico do Cu e do Fe das sementes tratadas com nCuO e nFe3O4-PEG persistiram majoritariamente em sua forma primitiva. Estes resultados contribuem para o entendimento de como nCuO, nFe3O4 e nFe3O4-PEG interagem com sementes de feijão e destaca seu potencial uso no tratamento de sementes

Cintiladores inorgânicos com tempo de decaimento de luminescência rápido, densidade alta e boa produção de luz têm sido objeto de estudos para aplicações em física nuclear, física de energias altas, tomografia nuclear e outros campos da ciência e da engenharia. Cristais de cintilação baseados em iodeto de césio (Csl) são materiais que apresentam higroscopia relativamente baixa, número atômico alto, fácil manuseio e custo baixo, características que favorecem o seu uso como detectores de radiação. Neste trabalho descreve-se a obtenção de cristais Csl puro, Csl:Br e Csl:Pb, utilizando-se a técnica de Bridgman. A concentração do elemento dopante bromo (Br) foi estudada no intervalo de 1,5x10-1 M a 10-2 M e o elemento chumbo (Pb) no intervalo de 10-2 M a 5x10-4 M. Para avaliar os cintiladores desenvolvidos foram efetuadas medidas sistemáticas de emissão de luminescência e tempo de decaimento de luminescência para a radiação gama, ensaios de transmitância óptica, ensaios de microdureza Vickers, determinações da distribuição dos dopantes ao longo dos cristais crescidos e análise da resposta dos cristais à radiação gama no intervalo de energia de 350 keV a 1330 keV e partículas alfa provenientes de fonte de 241Am com energia de 5,54 MeV. Os resultados obtidos de tempo de decaimento de luminescência para os cristais CsI:Br e CsI:Pb, no intervalo de 13 ns a 19 ns, mostraram-se promissores para medidas de alta energia. O estudo de microdureza mostrou um aumento significativo em função da concentração dos elementos dopantes, quando comparado ao cristal Csl puro, melhorando desta forma a resistência mecânica dos cristais crescidos. A validade de utilização desses cristais como sensores de radiação para medidas de radiação gama e partículas alfa, pode ser demonstrada pelos resultados da resposta à radiação. / Inorganic scintillators with fast luminescence decay time, high density and high light output have been the object of studies for application in nuclear physics, high energy physics, nuclear tomography and other fields of science and engineering. Scintillation crystals based on cesium iodide (CsI) are matters with relatively low higroscopy, high atomic number, easy handling and low cost, characteristics that favor their use as radiation detectors. In this work, the growth of pure CsI crystals, CsI:Br and CsI:Pb, using the Bridgman technique, is described. The concentration of the bromine doping element (Br) was studied in the range of 1,5x10-1 M to 10-2 M and the lead (Pb) in the range of 10-2 M to 5x10-4 M. To evaluate the scintillators developed, systematic measurements were carried out for luminescence emission and luminescence decay time for gamma radiation, optical transmittance assays, Vickers micro-hardness assays, determination of the doping elements distribution along the grown crystals and analysis of crystals response to the gamma radiation in the energy range of 350 keV to 1330 keV and alpha particles from a 241Am source, with energy of 5.54 MeV. It was obtained 13 ns to 19 ns for luminescence decay time for CsI:Br and CsI:Pb crystals. These results were very promising. The results obtained for micro-hardness showed a significant increase in function of the doping elements concentration, when compared to the pure CsI crystal, increasing consequently the mechanical resistance of the grown crystals. The validity of using these crystals as radiation sensors may be seen from the results of their response to gamma radiation and alpha particles.

Cintiladores inorgânicos com tempo de decaimento de luminescência rápido, densidade alta e boa produção de luz têm sido objeto de estudos para aplicações em física nuclear, física de energias altas, tomografia nuclear e outros campos da ciência e da engenharia. Cristais de cintilação baseados em iodeto de césio (Csl) são materiais que apresentam higroscopia relativamente baixa, número atômico alto, fácil manuseio e custo baixo, características que favorecem o seu uso como detectores de radiação. Neste trabalho descreve-se a obtenção de cristais Csl puro, Csl:Br e Csl:Pb, utilizando-se a técnica de Bridgman. A concentração do elemento dopante bromo (Br) foi estudada no intervalo de 1,5x10-1 M a 10-2 M e o elemento chumbo (Pb) no intervalo de 10-2 M a 5x10-4 M. Para avaliar os cintiladores desenvolvidos foram efetuadas medidas sistemáticas de emissão de luminescência e tempo de decaimento de luminescência para a radiação gama, ensaios de transmitância óptica, ensaios de microdureza Vickers, determinações da distribuição dos dopantes ao longo dos cristais crescidos e análise da resposta dos cristais à radiação gama no intervalo de energia de 350 keV a 1330 keV e partículas alfa provenientes de fonte de 241Am com energia de 5,54 MeV. Os resultados obtidos de tempo de decaimento de luminescência para os cristais CsI:Br e CsI:Pb, no intervalo de 13 ns a 19 ns, mostraram-se promissores para medidas de alta energia. O estudo de microdureza mostrou um aumento significativo em função da concentração dos elementos dopantes, quando comparado ao cristal Csl puro, melhorando desta forma a resistência mecânica dos cristais crescidos. A validade de utilização desses cristais como sensores de radiação para medidas de radiação gama e partículas alfa, pode ser demonstrada pelos resultados da resposta à radiação. / Inorganic scintillators with fast luminescence decay time, high density and high light output have been the object of studies for application in nuclear physics, high energy physics, nuclear tomography and other fields of science and engineering. Scintillation crystals based on cesium iodide (CsI) are matters with relatively low higroscopy, high atomic number, easy handling and low cost, characteristics that favor their use as radiation detectors. In this work, the growth of pure CsI crystals, CsI:Br and CsI:Pb, using the Bridgman technique, is described. The concentration of the bromine doping element (Br) was studied in the range of 1,5x10-1 M to 10-2 M and the lead (Pb) in the range of 10-2 M to 5x10-4 M. To evaluate the scintillators developed, systematic measurements were carried out for luminescence emission and luminescence decay time for gamma radiation, optical transmittance assays, Vickers micro-hardness assays, determination of the doping elements distribution along the grown crystals and analysis of crystals response to the gamma radiation in the energy range of 350 keV to 1330 keV and alpha particles from a 241Am source, with energy of 5.54 MeV. It was obtained 13 ns to 19 ns for luminescence decay time for CsI:Br and CsI:Pb crystals. These results were very promising. The results obtained for micro-hardness showed a significant increase in function of the doping elements concentration, when compared to the pure CsI crystal, increasing consequently the mechanical resistance of the grown crystals. The validity of using these crystals as radiation sensors may be seen from the results of their response to gamma radiation and alpha particles.

Nanotechnology offers a great potential do design fertilizers with unique properties capable to boost the plant productivity. However, the nanoparticles environmental fate and their toxic responses still need to be deeply investigated to their safe use. This study aims to investigate the effect of copper oxide (nCuO) and magnetite nanoparticles (nFe3O4) on the germination and seedling development of Phaseolus vulgaris L. Seeds were treated in nanoparticles dispersions in a wide range of concentrations (1, 10, 100 and 1 000 mg L-1) and incubated in a germination chamber during 5 days. Different sized nCuO (25, 40 and <80 nm) and polyethylene glycol (PEG) coated nFe3O4 were evaluated. Although both nCuO and nFe3O4 treatments did not affected the germination rate, seedling weight gain was promoted by 40 nm CuO at 100 mg Cu L-1 and inhibited by 1 000 mg Cu L-1 of 25 nm CuO and positive control (CuSO4). Among the tested nCuO, the higher chemical reactivity was found for the 25 nm CuO, and this may partially explain the observed deleterious effects. Seeds treated in nFe3O4-PEG at 1 000 mg Fe L-1 increased radicle elongation compared to the negative control (water), while Fe2+/Fe3+ (aq) (positive control) and bare nFe3O4 at 1 000 mg Fe L-1 treatments reduced the radicle of the seedlings. The growth promoted by the PEG-coated nanoparticles can be justified by the higher water uptake induced by the PEG, and also by its lower chemical reactivity compared to the bare nanoparticles. This was reinforced by enzymatic assays since nFe3O4-PEG treatment was also the least harmful to the alpha-amylase activity. X-ray fluorescence spectroscopy (XRF) showed that most of the Cu and Fe incorporated by the seeds remained in the seed coat, specially in the hilum region, and X-ray tomography indicated that Fe3O4-PEG penetrated in this structure. X-ray absorption spectroscopy (XAS) unraveled that the Cu and Fe chemical environment of the nCuO and nFe3O4-PEG treated seeds persisted mostly in its primitive form. These results contribute to the understanding of how nCuO, nFe3O4 and nFe3O4-PEG interact with common bean seeds and seedlings and highlights its potential use in seed priming / A nanotecnologia oferece um grande potencial para o desenvolvimento de fertilizantes com propriedades únicas, capazes de impulsionar a produtividade das plantas. Contudo, o destino ambiental e os efeitos tóxicos das nanopartículas ainda necessitam ser profundamente investigados para o seu uso seguro. Este estudo visa investigar o efeito das nanopartículas de óxido de cobre (nCuO) e magnetita (nFe3O4) na germinação e desenvolvimento das plântulas de Phaseolus vulgaris L. As sementes foram tratadas em dispersões de nanopartículas em diversas concentrações (1, 10, 100 and 1 000 mg L-1) e incubadas em uma câmara de germinação durante 5 dias. Diferentes tamanhos de nCuO (25, 40 e <80 nm) e nFe3O4 recoberta com polietileno glicol (PEG) e foram avaliados. Embora ambos tratamentos de nCuO e nFe3O4 não afetaram a taxa de germinação, o ganho de massa das plântulas foi promovido pela nCuO de 40 nm à 100 mg Cu L-1 e inibido pelos tratamentos de nCuO de 25 nm e controle positivo (CuSO4) à 1 000 mg Cu L-1. Dentre as nCuO testadas, a maior reatividade química foi encontrada para a nCuO de 25 nm, e isso pode explicar parcialmente os efeitos deletérios desta nanopartícula. Sementes tratadas com nFe3O4-PEG à 1 000 mg Fe L-1 aumentaram o alongamento das radículas em comparação ao controle negativo (água), enquanto que os tratamentos Fe2+/Fe3+ (aq) (controle positivo) e nFe3O4 sem recobrimento à 1 000 mg Fe L-1 reduziram as radículas das plântulas. O crescimento promovido pelas nanopartículas recobertas com PEG pode ser justificado pela maior absorção de água induzido pelo PEG, e também pela sua baixa reatividade química comparada às nanopartículas sem recobrimento. Isso foi reforçado por ensaios enzimáticos uma vez que o tratamento de nFe3O4-PEG foi também o menos prejudicial à atividade da alfa-amilase. A espectroscopia de fluorescência de raios-X (XRF) mostrou que a maior parte do Cu e do Fe incorporados pelas sementes permaneceu no tegumento, especialmente na região do hilo, e a tomografia de raios-X indicou que nFe3O4-PEG penetrou nesta estrutura. A espectroscopia de absorção de raios-X (XAS) revelou que o ambiente químico do Cu e do Fe das sementes tratadas com nCuO e nFe3O4-PEG persistiram majoritariamente em sua forma primitiva. Estes resultados contribuem para o entendimento de como nCuO, nFe3O4 e nFe3O4-PEG interagem com sementes de feijão e destaca seu potencial uso no tratamento de sementes

Alfredo Volpi (1896 - 1988) é um dos mais importantes pintores brasileiros contemporâneos. Sua extensa obra foi marcada, principalmente, por composições cromáticas e abstrações geométricas. Foi um artista que dava importância muito grande à técnica e aos materiais, tendo desenvolvido uma maneira própria e sistemática de trabalhar: confeccionava suas próprias telas, tintas e até pigmentos, com terras naturais. Analisou-se ao todo 11 pinturas a têmpera em diversos suportes (tela, aglomerado de madeira e mural), 10 delas realizadas na década de 1950, período em que a obra do artista passou por uma grande transformação, do figurativismo ao abstracionismo e do uso de tintas industriais à base de óleo para a técnica medieval da têmpera. As características de opacidade, saturação cromática e presença material do pigmento sobre a superfície da tela, inerentes a esta técnica pictórica, tornam-se elementos tão importantes em sua obra, quanto o uso da cor na formação do espaço. Foram realizados estudos de cor e composição química dos materiais e levantamentos de informações sobre seus procedimentos técnico-artísticos a partir de métodos analíticos complementares não destrutivos e pesquisa em diversas fontes, pois entende-se que estes elementos são chaves importantes para o entendimento mais profundo de sua obra. O espectrofotômetro foi utilizado para medição da cor com base em curvas espectrais e coordenadas numéricas de referência dentro de um espaço de cor uniforme. Técnicas de imageamento por luz visível, fluorescência visível por radiação ultravioleta e reflectografia de infravermelho próximo foram utilizadas para levantar informações sobre o processo criativo do artista, detectar locais de intervenções de restauro e observar o grau de fluorescência de cada área cromática das pinturas como auxiliar na identificação de pigmentos. A técnica de EDXRF (Espectroscopia de Fluorescência de Raios X por Energia Dispersiva) foi importante para caracterização química dos materiais. O MEV-EDS (Microscópio Eletrônico de Varredura com Espectroscopia por Dispersão de Energia de Raios X) forneceu informações sobre composição química e imagens da superfície dos materiais presentes nas pinturas murais. A partir da integração destas informações pôde-se identificar uma parte da rica paleta deste pintor, documentar as cores das pinturas no presente, identificar ou dar indicações da composição dos pigmentos e da base de preparação das pinturas e iluminar partes da história de cada uma das obras, como presença de esboços feitos à grafite, pinturas anteriores encobertas, pinceladas e maneiras de misturar a tinta e documentar seu estado atual de conservação. As ferramentas utilizadas se mostraram úteis na caracterização das pinturas, revelaram informações inéditas sobre a obra deste artista e levantaram novas indagações. As informações obtidas podem ser o início de um banco de dados sobre sua obra. / Painter Alfredo Volpi (1896 - 1988) is one of the most important contemporary Brazilian artists. His extensive work, mostly characterised by chromatic compositions and geometric abstractions, is technically unique. The artist attributed great importance to craft and materials, developing his own systematic way of working. Among the paintings analysed were 11 temperasin various supports (canvas, hardboard panel and mortar). Of the selection, 10 paintings were made around 1950, when the artist\'s work underwent a major transformation, from figuration to abstraction, from the use of industrial oil-based paints to the medieval technique of tempera. This technique, known for its opacity, colour saturation and material presence of pigments on the canvas,became as important as the colour itself in the shaping of the artist\'s new spatial relation. It is understood that these elements are important keys to a deeper understanding of his work, both technically and artistically. The present investigation was carried out making use of non-destructive complementary analytical techniques. The aim was to study the chromatic and chemical composition characteristics of his paintings and gather information on the technical procedures the artist may have used. The spectrophotometer was used to measure the colour based on the spectral curves and numerical reference coordinates within a uniform colour space. Techniques of visual examination with visible light, visible fluorescence by ultraviolet radiation and near-infrared reflectography were used to gather information about the artist\'s creative process. These techniques also helped detect restoration patches and identify pigments. The EDXRF (Energy Dispersive X-Ray Fluorescence) technique was important for chemical characterization of materials, while the SEM-EDS (Scanning Electron Microscope with Energy Dispersive X-Ray Spectroscopy) provided surface images and information on the chemical composition of the material present in the murals. From the integration of these techniques it was possible to identify a part of the rich palette of Volpi´s paintings; to document the present aspects of the colours; to recognize or give indications of pigment and ground compositions and to shed light on parts of each of the works background, such as the presence of graphite sketches, covered earlier paintings and brushstrokes as well as to document the current condition of the works under study. The tools used have proven useful in characterizing the paintings, revealing new information about the work of the artist and raising new questions. The information obtained may be the beginning of a database on his oeuvre.

This dissertation explores the role of brainstem structures in the development and expression of generalized tonic-clonic seizures. The functional consequences of brainstem seizures are investigated using the kindling paradigm in order to understand the behavioral and cognitive effects of generalized seizures. <BR><BR> I begin by investigating the general characteristics of brainstem kindling. The first experiment demonstrates that certain brainstem sites are indeed susceptible to kindling and begins to delineate the features that distinguish brainstem seizures from those evoked at other brain regions. Further investigation of the EEG signal features using wavelet analysis reveals that changes in the spectral properties of the electrographic activity during kindling include significant changes to high-frequency activity and organized low-frequency activity. I also identify transitions that include frequency sweeps and abrupt seizure terminations. The changing spectral features are shown to be critically associated with the evolution of the kindled seizures and may have important functional consequences. The surprising responsiveness of some brainstem structures to kindling forces us to reconsider the overall role of these structures in epileptogenesis as well as in the healthy dynamical functioning of the brain. <BR><BR> In order to study the functional consequences, a series of experiments examines the changes in behavior, cognition and affect that follow these brainstem seizures. Although the results show no effects on spatial learning or memory, there are significant and complex effects on anxiety- and depression-like behavior that appear to be related to motivation. In order to further study the cognitive effects, a second set of behavioral experiments considers how context (i.e., the environment) interacts with the behavioral changes. The results indicate that changes in affect may only be apparent when choice between seizure-related and seizure-free contexts is given, suggesting that the environment and choice can play key roles in the behavioral consequences of seizures. This thesis also includes an appendix that applies synchrotron imaging to investigate the anatomical consequences of electrode implantation in kindling and shows that significantly increased iron depositions occur even with purportedly biocompatible electrodes widely used in research and clinical settings. <BR><BR> Examination of the role of brainstem structures in generalized seizures in this dissertation offers new perspectives and insights to epileptogenesis and the behavioral effects of epilepsy. The changes in EEG features, behavior, affect and motivation observed after brainstem seizures and kindling may have important clinical implications. For example, the results suggest a need to reexamine the concept of psychogenic seizures, a potential connection to Sudden Unexplained Death in Epilepsy (SUDEP), and the contribution of environmental factors. It is hoped that these findings will help elucidate the complex issues involved in understanding and improving the quality of life for people with epilepsy.

This dissertation explores the role of brainstem structures in the development and expression of generalized tonic-clonic seizures. The functional consequences of brainstem seizures are investigated using the kindling paradigm in order to understand the behavioral and cognitive effects of generalized seizures. <BR><BR> I begin by investigating the general characteristics of brainstem kindling. The first experiment demonstrates that certain brainstem sites are indeed susceptible to kindling and begins to delineate the features that distinguish brainstem seizures from those evoked at other brain regions. Further investigation of the EEG signal features using wavelet analysis reveals that changes in the spectral properties of the electrographic activity during kindling include significant changes to high-frequency activity and organized low-frequency activity. I also identify transitions that include frequency sweeps and abrupt seizure terminations. The changing spectral features are shown to be critically associated with the evolution of the kindled seizures and may have important functional consequences. The surprising responsiveness of some brainstem structures to kindling forces us to reconsider the overall role of these structures in epileptogenesis as well as in the healthy dynamical functioning of the brain. <BR><BR> In order to study the functional consequences, a series of experiments examines the changes in behavior, cognition and affect that follow these brainstem seizures. Although the results show no effects on spatial learning or memory, there are significant and complex effects on anxiety- and depression-like behavior that appear to be related to motivation. In order to further study the cognitive effects, a second set of behavioral experiments considers how context (i.e., the environment) interacts with the behavioral changes. The results indicate that changes in affect may only be apparent when choice between seizure-related and seizure-free contexts is given, suggesting that the environment and choice can play key roles in the behavioral consequences of seizures. This thesis also includes an appendix that applies synchrotron imaging to investigate the anatomical consequences of electrode implantation in kindling and shows that significantly increased iron depositions occur even with purportedly biocompatible electrodes widely used in research and clinical settings. <BR><BR> Examination of the role of brainstem structures in generalized seizures in this dissertation offers new perspectives and insights to epileptogenesis and the behavioral effects of epilepsy. The changes in EEG features, behavior, affect and motivation observed after brainstem seizures and kindling may have important clinical implications. For example, the results suggest a need to reexamine the concept of psychogenic seizures, a potential connection to Sudden Unexplained Death in Epilepsy (SUDEP), and the contribution of environmental factors. It is hoped that these findings will help elucidate the complex issues involved in understanding and improving the quality of life for people with epilepsy.

Cancer is one of the leading causes of death worldwide, and affects roughly 1.5 million new people in the United States every year. One of the leading tools in the detection and treatment of cancer is radiation. Tumors can be detected and identified using CT or PET scans, and can then be treated with external beam radiotherapy or brachytherapy. By taking advantage of the physical properties of gold and the biological properties of nanoparticles, gold nanoparticles (GNPs) can be used to improve both cancer radiotherapy and imaging. By infusing a tumor with GNPs, either using passive extravasation of nanoparticles by the tumor vasculature or active targeting of an antibody-conjugated nanoparticle to a specific tumor marker, the higher photon cross-section of gold will cause more radiation dose to be deposited in the tumor during photon-based radiotherapy. In principle, this would allow escalation of dose to the tumor while not increasing the dose to normal healthy tissue. Additionally, if a tumor infused with GNPs was irradiated by an external kilo-voltage source, the fluorescence emitted by the gold atoms would allow one to localize and quantify the GNP concentration. This work has two main aims: to quantify the GNP-mediated dose enhancement during GNRT on a nanometer scale, and to develop a refined imaging modality capable of quantifying GNP location and concentration within a small-animal-sized object. In order to quantify the GNP-mediated dose enhancement on a nanometer scale, a computational model was developed. This model combines both large-scale and small-scale calculations in order to accurately determine the heterogeneous dose distribution of GNPs. The secondary electron spectra were calculated using condensed history Monte Carlo, which is able to accurately take into account changes in beam quality throughout the tumor and calculate the average energy spectrum of the secondary charged particles created. Then, the dose distributions of these electron spectra were calculated on a nanometer scale using event-by-event Monte Carlo. The second aim is to develop an imaging system capable of reconstructing a tomographic image of GNP location and concentration in a small animal-sized object by capturing gold fluorescence photons emitted during irradiation of the object by an external beam. This would not only allow for localization of GNPs during gold nanoparticle-aided radiation therapy (GNRT), but also facilitate the use of GNPs as imaging agents for drug-delivery or other similar studies. The purpose of this study is to develop a cone-beam implementation of XFCT that meets realistic constrains on image resolution, detection limit, scan time, and dose. A Monte Carlo model of this imaging geometry was developed and used to test the methods of data acquisition and image reconstruction. The results of this study were then used to drive the production of a functioning benchtop, polychromatic cone-beam XFCT system.

Ce projet a comme objectif général de participer au développement et de tester le potentiel de la méthode d’analyse par fluorescence aux rayons X du laboratoire de caractérisation non destructrice de l’Université de Montréal, en procédant à la caractérisation chimique de cherts provenant de deux carrières distinctes, exploitées à diverses périodes au cours de la préhistoire, soit celle de La Martre (DhDm-8, Gaspésie) et celle du site CkEe-28 (Témiscouata). En fonction des comportements de chacun des éléments, six d’entre eux furent sélectionnés pour effectuer la caractérisation, parmi lesquels on compte trois éléments majeurs (Si, Al, Fe) et trois éléments traces (Ba, La, Ce). D’un point de vue méthodologique, les résultats confirment que l’appareillage du laboratoire est apte à procéder à ce genre d’analyse non destructrice, tandis que sur le plan archéométrique, il s’est avéré possible de discriminer les cherts sur la base de graphiques et d’une analyse statistique discriminante. Afin de vérifier si cette caractérisation est utile et pertinente dans un cadre archéologique, l’analyse d’artéfacts en chert provenant des sites de l’anse à la Vache (DaEi-6, île Verte), Turcotte-Lévesque (DaEi-8, île Verte) et de Rimouski (DcEd-1) fut aussi effectuée dans le but de localiser l’un ou l’autre des cherts au sein des assemblages. Les résultats démontrent que la caractérisation est fonctionnelle dans un cadre archéologique, puisque les cherts des carrières de La Martre et Touladi furent repérés sur chacun des sites, à l’exception du site de Rimouski, où seul le chert Touladi semble présent. / The main objective of this project is to test, and to participate in the development of the non-destructive energy dispersive x-ray fluorescence chemical characterization method developed at the “Laboratoire de caractérisation non destructive de l’Université de Montréal”. To do so, I analyzed chert originating from two different prehistoric quarries, the La Martre quarry DhDm-8, Gaspé Peninsula, and that of quarry CkEe-28, Témiscouata, Québec. Both quarries were exploited intermittently from the Late PaleoIndian through the Archaic and into the Woodland periods. The six elements involved in the characterization, three major elements (Si, Al, Fe) and three trace elements (Ba, La, Ce), were selected because of their specific features. On one hand, results confirm that the Université de Montréal EDXRF analyzer is able to analyze with precision solid rock chips. On the other hand, by using bivariate and ternary plots, as well as discriminant analysis, I was able to distinguish one chert from the other. In order to ensure the validity of the chemical analysis, archaeological samples from sites on the St. Lawrence Estuary including Rimouski (DcEd-1), l’Anse à la Vache and Turcotte-Lévesque (DaEi-6 and DaEi-8) were tested and compared to the results for the quarry samples. Results show that the characterizatoin can be applied on archaeological artefacts since both cherts were located on every sites, except for Rimouski, where only Touladi chert was present. / En raison de la grande résolution des photographies des échantillons, celles-ci se trouvent dans un fichier complémentaire, puisque les conditions de forme imposées ne permettaient pas l'affichage intégral de ces images au sein du mémoire.

Made available in DSpace on 2014-10-09T12:42:11Z (GMT). No. of bitstreams: 0 / Made available in DSpace on 2014-10-09T14:05:08Z (GMT). No. of bitstreams: 0 / Dissertação (Mestrado) / IPEN/D / Instituto de Pesquisas Energeticas e Nucleares - IPEN-CNEN/SP