The overall goal of this study was to identify mineralized scaffolds which can serve as potential alternatives to bone graft substitutes intended for cleft palate repair. The aim of this preliminary study was to evaluate the role of fibrinogen (Fg) and nano-hydroxyapatite (nHA) in enhancing mineralization potential of polydioxanone (PDO) electrospun scaffolds. Scaffolds were fabricated by blending PDO:nHA:Fg in the following weight ratios: 100:0:0, 50:25:25, 50:50:0, 50:0:50, 0:0:100 and 0:50:50. Scaffolds were immersed in different simulated body fluids for 5 and 14 days to induce mineralization. The inclusion of fibrinogen induced sheet-like mineralization while individual fiber mineralization was noticed in its absence. Modified protocols of alizarin red staining and burn-out test were developed to quantify mineral content of scaffolds. After mineralization, 50:50:0 scaffolds were still porous and contained the most mineral. 50:25:25 scaffolds had the highest mineralization potential but lacked porosity. Therefore, it can be anticipated that these mineralized organic-inorganic electrospun scaffolds will induce bone formation.

Biopolymers are becoming more attractive as advanced wound dressings because of their naturally derived origin, abundance, low cost and high compatibility with the wound environment. Arabinoxylan (AX) is a class of polysaccharide polymers derived from cereal grains that are primarily used in food products and cosmetic additives. Its application as a wound dressing material has yet to be realized. In this two-pronged project, arabinoxylan ferulate (AXF) was fabricated into electrospun fibers and gel foams to be evaluated as platforms for wound dressing materials. In the first study, AXF was electrospun with varying amounts of gelatin. In the second study, AXF was dissolved in water, enzymatically crosslinked and lyophilized to form gel foams. The morphology, mechanical properties, porosity, drug release kinetics, fibroblast cell response and anti-microbial properties were examined for both platforms. Carbohydrate assay was conducted to validate the presence of arabinoxylan ferulate in the electrospun GEL-AXF fibers. Swelling and endotoxin quantification studies were done to evaluate the absorptive capacity and sterilization agent efficacy respectively in AXF foams. The results indicated successful fabrication of both platforms which validated the porous, absorptive, biocompatibility and drug release properties. The results also exhibited that silver impregnated AXF scaffolds inhibited growth of Pseudomonas aeruginosa, Staphylococcus aureus and Enterococcus faecalis bacteria species, anti-microbial properties necessary to function as advanced wound dressing materials. Future work will be done to improve the stability of both platforms as well as evaluate its applications in vivo.

Mon travail fut de développer différents projets en vue de mieux comprendre la dynamique et l'organisation des réseaux d'actine et les mécanismes moléculaires à l'origine de la production de force, cela en systèmes reconstitués bio-mimétiques. Dans un premier temps je me suis intéressée à l'étude de l'organisation spatio-temporelle des réseaux d'actine et de ses protéines associées durant la motilité de particules recouverte de promoteurs de nucléation (Achard et al, Current Biology, 2010 et Reymann et al, sous presse à MBOC). J'ai suivi en temps réel l'incorporation de deux régulateurs de l'actine (capping protein et ADF/cofiline) et montré que leur contrôle biochimique sur l'actine gouverne également ces propriétés mécaniques. Afin de mieux caractériser les propriétés mécaniques de ces réseaux d'actine en expension, j'ai ensuite développé un système biomimétique novateur utilisant un set-up de micro-patterning permettant un contrôle spatial reproductible des sites de nucléation d'actine. Cela m'a permis de montrer comment des barrières géométriques, semblables à celles trouvées dans les cellules, peuvent influencer la formation dynamique de réseaux organisés d'actine et ainsi contrôler la localisation de la production de forces. (Reymann et al, Nature Materials, 2010). De plus l'addition de moteurs moléculaires sur ce système versatile nous a permis d'étudier la contraction induite par des myosines. En particulier les myosines VI-HMM interagissent de manière sélective sur différentes architectures d'actine (organisation parallèle ou antiparallèle, réseau enchevêtré), aboutissant à un processus en trois phase : tension puis déformation des réseaux d'actine fortement couplé à un désassemblage massif des filaments. Ce phénomène est intimement dépendant de l'architecture du réseau d'actine et pourrait donc jouer un rôle essentiel dans la régulation spatiale des zones d'expansion et de contraction du cytosquelette in vivo. (Travail en cours d'écriture). / I have developed different projects in order to tackle the problem of actin network dynamics and organization as well as the molecular mechanism at the origin of force production in biomimetic reconstituted systems. My first interest concerned the spatiotemporal organization of actin networks and actin-binding proteins during actin based motility of nucleation promoting factor-coated particles (Achard et al, Current Biology, 2010 and Reymann et al, in press at MBOC). I tracked in real time the incorporation of two actin regulators and showed that their biochemical control of actin dynamics also governs its mechanical properties. To further characterize mechanical properties of expanding actin networks, I used an innovative micro-patterning set-up allowing a reproducible spatial control of actin nucleation sites. It allowed me to show that geometrical boundaries, such as those encountered in cells, affect the dynamic formation of highly ordered actin structures and hence control the location of force production (Reymann et al, Nature Materials, 2010). Finally the addition of molecular motors on this tunable system allowed me to study implications for myosin-induced contractility. In particular, HMM-MyosinVI selectively interact with the different actin network architectures (parallel, anti-parallel organization or entangled networks) and leads to a selective three-phase process of tension, deformation of actin networks tightly coupled to massive filament disassembly. This phenomenon being highly dependent on actin network architecture could therefore play an essential role in the spatial regulation of expanding and contracting regions of actin cytoskeleton in cells. (Work in writing process).

Dermicidina (DCD) é um gene mapeado no cromossomo 12, lócus 12q13.1, e codifica uma proteína de 110 aminoácidos, que sofre um processamento proteolítico, gerando peptídeos ativos. O peptídeo C-terminal (DCD-1L) de 48 aminoácidos tem uma carga -2, e exerce função antibacteriana e antifúngica, e o peptídeo C-terminal splice variante, denominado DCD-SV de 59 aminoácidos, tem carga neutra, e suas propriedades ainda não foram estabelecidas. Neste trabalho são apresentados os resultados da expressão, purificação e sequenciamento da DCD nativa produzida em E. coli BL21 transformada com o vetor pAE-DCD. Na segunda parte são descritas as análises físico-químicas e bioquímicas da interação dos peptídeos sintéticos DCD-1L e DCD-SV com vesículas lipídicas gigantes e vesículas unilamelar grandes sintetizadas com palmitoil-oleoil-fosfatidilcolina. As preferenciais estruturais dos peptídeos foram investigadas por espectroscopia de Dicroísmo Circular. Nossos resultados sugerem que a DCD-SV tem alta propensão para adotar uma estrutura helicoidal permitindo sua inserção e oligomerização em membranas biomiméticas, e possível formação de canais de condutância molecular. / Dermicidin (DCD) is mapped a gene on chromosome 12, locus 12q1.13 whose 110 amino acids protein is proteolytically processed to N and C-terminal peptides. The 48-amino acid C-terminal peptide (DCD-1L) has -2 net charges and display antibacterial and antifungal properties and the 59-amino acid splice variant C-terminal peptide (DCD-SV) has neutral net charge; however, its structure and biological function are unknown. Here we show the results of expression, purification and amino acid sequencing of recombinant DCD protein produced in E.coli transformed with pAE-DCD vector. We also describe the results of physical-chemical and biochemical analyses showing the visible differences between the interactions of DCD-1LL and DCD-SV synthetic peptides with giant unilamellar vesicles and large unilamellar vesciles made of palmitoyl-oleoyl phosphatidylcholine, used as biomimetic membranes. The structural preferences of peptides were analyzed by circular dichroism spectroscopy. Our results suggest that DCD-SV peptide has higher propensity to adopt helicoidal structure enabling it to insert into mimetic membranes, undergo oligomerization and formation of conductance channel.

A associação entre DNA de cadeia de longa e partículas catiônicas foi caracterizada por determinações de tamanho (espalhamento de luz dinâmico), análise de potencial-zeta, turbidimetria, estabilidade coloidal, microscopia de força atômica (AFM) e determinação de citotoxicidade dos arranjos contra a bactéria E. coli a partir da contagem de unidades formadoras de colônia (UFC). Partículas de poliestireno sulfato (PSS) de diversos tamanhos foram recobertas por uma bicamada de brometo de dioctadecildimetilamônio (DODAB) e entituladas partículas biomiméticas catiônicas PSS/DODAB. Estas são altamente organizadas, catiônicas e monodispersas. Em seguida, por adição de λ, T5 ou T2-DNA, os arranjos supramoleculares PSS/DODAB/DNA foram obtidos e caracterizados em função da concentração de DNA e tamanho de partícula (80-700 nm). Em baixas concentrações de DNA, foram obtidos arranjos catiônicos PSS/DODAB/DNA de boa estabilidade coloidal, polidispersidade moderada e alta citotoxicidade contra E. coli. A partir da concentração de DNA correspondente à neutralização de cargas, foram obtidos arranjos neutros ou aniônicos de baixa estabilidade coloidal, alta polidispersidade e citotoxicidade moderada. Arranjos similares a nucleossomos foram visualizados por AFM para alguns arranjos na situação de neutralização de cargas (potencial-zeta igual a zero). Estão em perspectiva experimentos com DNA plasmidial que poderão revelar o papel do tamanho de partícula, carga e polidispersidade sobre a transfecção de genes em sistemas de células-modelo / The interaction between giant bacteriophage DNA and cationic biomimetic particles was characterized from sizing by dynamic light-scattering, zeta-potential analysis, turbidimetry, colloid stability, atomic force microscopy (AFM) and determination of cytotoxicity against E. coli from colony forming unities (CFU) counting. Firstly, polystyrene sulfate (PSS) particles with different sizes were covered by a dioctadecyldimethylammonium bromide (DODAB) bilayer yielding the so called cationic biomimetic particles (PSS/DODAB). These cationic particles are highly organized, present a narrow size distribution and were obtained over a range of particle sizes. Thereafter, upon adding λ, T5 or T2-DNA to PSS/DODAB particles, supramolecular assemblies PSS/DODAB/DNA were obtained and characterized over a range of DNA concentrations and particle sizes (80-700 nm). Over the low DNA concentration range, PSS/DODAB/DNA assemblies were cationic, colloidally stable with moderate polydispersity and highly cytotoxic against E. coli. From DNA concentration corresponding to charge neutralization, neutral or anionic supramolecular assemblies PSS/DODAB/DNA exhibited low colloid stability, high polydispersity and moderate cytotoxicity. Some nucleosome mimetic assemblies were observed by AFM at charge neutralization (zetapotential equal to zero). In perspective are experiments with plasmid DNA which will possibly reveal the role of particle charge, size and polydispersity for PSS/DODAB/DNA mediated gene transfection

Peptídeos antimicrobianos são vistos como alternativas promissoras a serem empregadas pela iindústria farmacêutica no controle de infecções causadas por microrganismos, como também na indústria alimentícia, onde podem desempenhar papéis como conservantes naturais de alimentos. Plantaricina149 é um membro deste grupo, sendo composto por 22 resíduos de aminoácidos, com natureza catiônica e atividade inibitória sobre algumas bactérias patogênicas. Neste trabalho, foram sintetizados diferentes peptídeos análogos à Plantaricina149 para investigar suas ações sobre microrganismos (bactérias e fungos), a fim de correlacionar estes estudos com a ação lítica do peptídeo em modelos de membrana diversos (monocamadas e vesículas fosfolipídicas). A interação de Plantaricina149 com estes sistemas foi monitorada pelas espectroscopias de dicroísmo circular e fluorescência, ensaios de tensão superficial, calorimetria e ressonância plasmônica de superfície, e mostrou ser altamente específica para superfícies fosfolipídicas que apresentam densidade de cargas negativas, tais como a membrana celular de bactérias. A interação eletrostática inicial que se estabelece entre o peptídeo e os fosfolipídios é de extrema importância, sendo capaz de induzir uma estruturação helicoidal na região C-terminal do peptídeo, enquanto a região Nterminal contribui com as interações hidrofóbicas necessárias para a penetração do peptídeo nas camadas fosfolipídicas levando a ruptura das mesmas. De forma semelhante, a atividade antimicrobiana de Plantaricina149a (e alguns de seus análogos) também mostrou ser resultado das interações das duas regiões da molécula, e foi afetada com a retirada ou modificação da região N-terminal do peptídeo. Com a deleção desta região, o peptídeo passou a ter somente ação bacteriostática sobre Staphylococcus aureus e Pseudomonas aeruginosa, perdendo a capacidade bactericida. / Antimicrobial peptides are seen as promising alternatives to be employed in pharmaceutical industry for controlling infections caused by microorganisms, and also in food industry, where they can play roles as natural food preservatives. Plantaricina149 is a member of this group, constituted of 22 amino acid residues, cationic in nature and presenting inhibitory activity against some pathogenic bacteria. In this work, different Plantaricina149 analog peptides were synthesized to investigate their action against microorganisms (bacteria and fungi), with the aim of correlating these studies with the lytic action of the peptide on several membrane models (phospholipid monolayers and vesicles). The Plantaricina149 interaction with these systems was monitored by circular dichroism and fluorescence spectroscopies, surface tension assays, calorimetry and surface plasmon resonance, and showed to be highly specific to phospholipid surfaces that present negative charge density, such as the bacteria cell membrane. The initial peptide-phospholipids electrostatic interaction is extremely important, and it is capable of inducing a helical structure in the peptide C-terminal region, while the Nterminal region contributes with the hydrophobic interactions needed to the peptide penetration in the phospholipid layers and to the disruption of them. Similarly, the Plantaricina149 antimicrobial activity has also proved to be a result of the interactions from the two regions of the molecule, and it was strongly affected by the removal or modification of the peptide N-terminal region. Promoting the deletion of this region has left the peptide only with a bacteriostatic action against Staphylococcus aureus and Pseudomonas aeruginosa, removing its bactericide ability.

As cerâmicas porosas empregadas na substituição óssea, são utilizadas por apresentarem características como biocompatibilidade, ter estrutura tridimensional e apresentar alta porosidade. Nesse sentido, o objetivo desse trabalho foi obter e caracterizar cerâmicas porosas de Al2O3 e Al2O3 contendo 5% em volume de inclusões de ZrO2, produzidas pelo método da réplica. Essas cerâmicas porosas tiveram sua superfície tratada quimicamente com ácido fosfórico e foram recobertos, com fosfato de cálcio usando o método biomimético, em solução de SBF 5X (Simulated Body Fluid) por um período de incubação de 14 dias. Após o recobrimento, algumas cerâmicas porosas foram tratadas quimicamente para incorporação do Sr2+. Em seguida foram caracterizadas morfologicamente e estruturalmente usando ensaios de compressão axial, porosidade aparente, microscopia eletrônica de varredura (MEV), microtomografia de Raio X (µ-CT), difratometria de Raio X (DRX), Espectroscopia de Infravermelho Próximo (NIR), emissão óptica com plasma indutivamente acoplado (ICP-OES), Energia Dispersiva de Raio-X (EDS) e por Ensaios biológicos utilizando cultura de células para análise de viabilidade celular. As cerâmicas porosas de alumina e alumina-zircônia apresentaram, respectivamente, porosidade aparente de 80,93 % e 78,82 %, resistência à compressão axial, 2,93 MPa e 6,59 MPa, além de uma ampla faixa de tamanho de poros de, desejáveis para o favorecimento de interesses biológicos destinados à regeneração e formação de tecido ósseo. O recobrimento biomimético usando SBF 5X produziu a formação das fases α-TCP, β-TCP, TTCP e Hidroxiapatita, usando período de incubação de 14 dias. A incorporação de Sr2+ na estrutura dos fosfatos mostrou-se mais eficientes nos corpos porosos de alumina-zircônia. Os ensaios in vitro mostraram a biocompatibilidade das cerâmicas porosas estudadas, demonstrando a possibilidade de sua utilização como material para substituição ou preenchimento ósseo. / The porous ceramics used in bone substitution are used because they present characteristics as biocompatibility, have a three - dimensional structure and have high porosity. In this sense, the objective of this work was to obtain and characterize porous ceramics of Al2O3 and Al2O3 containing 5% by volume of ZrO2 inclusions, produced by the replica method. These porous ceramics were chemically treated with phosphoric acid and were coated with calcium phosphate using the biomimetic method in 5X SBF solution (Simulated Body Fluid) for a 14 day incubation period. After coating, some porous ceramics were chemically treated for Sr2+ incorporation. They were then characterized morphologically and structurally using axial compression, apparent porosity, scanning electron microscopy (SEM), microtomography (µ-CT), X-ray diffractometry (XRD), Near Infrared (NIR) Coupled (ICP-OES), X-ray Dispersive Energy (EDS) and Biological Assays using cell culture for cell viability analysis. The porous ceramics of alumina and alumina-zirconia showed, respectively, 80.93% and 78.82% apparent porosity, axial compression strength, 2.93 MPa and 6.59 MPa, as well as a wide range of pore size, desirable for the promotion of biological interests destined to the regeneration and formation of bone tissue. Biomimetic coated using SBF 5X produced the formation of α-TCP, β-TCP, TTCP and Hydroxyapatite phases using a 14-day incubation period. The incorporation of Sr2+ in the phosphate structure proved to be more efficient in porous alumina-zirconia bodies. The in vitro tests showed the biocompatibility of the porous ceramics studied, demonstrating the possibility of their use as material for bone replacement or filling.

O principal objetivo deste trabalho foi estudar a influência do tratamento superficial com laser de femtossegundo em amostras de alumina e compósito de alumina-zircônia estabilizada com ítria para depósito e aderência de apatita. Os resultados obtidos mostraram que houve a formação de apatita sobre as superfícies das amostras que foram texturizadas com laser de femtossegundo e em seguida imersa em 1,5 SBF. Este método biomimético pôde, por conseguinte, tornar estas cerâmicas bioativas. Também houve a formação de apatita na superfície das amostras sem o tratamento a laser. Os efeitos da texturização na superfície para as diferentes cerâmicas e a influência do tempo de imersão em 1,5 SBF são discutidos, a fim de determinar a condição ótima para estimular a deposição e a adesão da apatita na superfície dos materiais. Finalmente, os resultados obtidos das diferentes análises são comparados. A adesão da hidroxiapatita é essencial para interação com o substrato e depende das propriedades das superfícies dos materiais. A qualidade desta adesão influenciará sua morfologia e a capacidade futura de osseointegração. As características de superfície dependem da química de superfície, energia de superfície e topografia de superfície. Geralmente, a reatividade de superfície e energia de superfície pode ser influenciada pelas características de molhabilidade, influenciando o desempenho de biomateriais. A adesão e crescimento da apatita depositada também é função da rugosidade superficial. O tratamento superficial com laser de femtossegundo melhora consideravelmente a adesão da apatita obtida pelo recobrimento biomimético nas superfícies dos materiais. / The main objective of this work was to study the influence of femtosecond laser surface treatment on samples of alumina and composite of zirconia-alumina yttria stabilized for deposit and adhesion of apatite. The results showed that there was apatite formation on the surfaces of the samples that have been textured with femtosecond laser and then immersed in SBF 1.5. This biomimetic method can therefore make these bioactive ceramics. There was also the formation of apatite in the samples without laser treatment. The effects of texturing surface for the different ceramics and the influence of immersion time in SBF 1.5 are discussed in order to determine the optimal conditions to promote the deposition and the adhesion of the apatite in the material`s surface. Finally, the results of the different analyzes are compared. The adhesion of hydroxyapatite is essential for interaction with the substrate and depends on the properties of material´s surface. The quality of this adhesion will influence their morphology and the future ability of osseointegration. The surface characteristics depend on the surface chemical, surface energy and surface topography. Generally, the reactivity of surface and the energy of surface can be affected by wetting characteristics influencing the performance of biomaterials. The adhesion and growth of apatite deposited is also a function of surface roughness. The femtosecond laser surface treatment greatly improves the adhesion of apatite obtained by biomimetic coating on the surfaces of materials.

As metaloporfirinas (MeP) cloreto de 5,10,15,20-tetra(pentafluorofenill)porfirina de manganês (III) e ferro (III) (MnIIIP e FeIIIP) foram imobilizadas em matriz de sílica híbrida mesoporosa do tipo SBA-15. Os grupos silanóis da SBA-15 foram modificados com (3-aminopropil)trietoxissilano (APTES) e (3-aminopropil)dietoximetilsilano (APDES), que após a imobilização das metaloporfirinas geraram os catalisadores FeP-APSBA, FeP-APMSBA, MnP-APSBA e MnP-APMSBA. Um terceiro tipo de material foi preparado a partir da ligação de grupos trimetilsilil (TMS) nos catalisadores FeP-APSBA e MnP-APSBA, gerando outros dois catalisadores que foram denominados FeP-APSBA-TMS e MnP-APSBA-TMS. Os materiais foram caracterizados por FTIR, RD UV-Vis, TG/TGA MEV, MET e isotermas de adsorção e dessorção de N2 (BET/BJH). Para analisar a natureza da interação solvente-superfície nos materiais, foram determinadas medidas goniométricas de energia livre de superfície. Os catalisadores foram estudados na oxidação dos substratos (Z)-ciclo-octeno e ciclo-hexano, utilizando iodosilbenzeno (PhIO) como espécie doadora de oxigênio a fim de avalia-los como biomiméticos do citocromo P450. Os parâmetros estruturais foram comparados aos resultados catalíticos frente à formação da gaiola de solvente e das espécies intermediárias de alta valência, FeIV(O)P+. e MnV(O)P e estudar como esses fatores afetam o rendimento e a seletividade das reações catalisadas. As MeP-SBAs apresentaram uma faixa de rendimento de 88 a 47 % para epoxidação de (Z)-ciclo-octeno. Já na oxidação de ciclo-hexano houve formação de 2 a 8 % de ciclo-hexanol e 2 % de ciclo-hexanona. Observou-se maior seletividade para o álcool com as FeP-SBAs. / Manganese (III) and iron (III) 5,10,15,20- tetra(pentafluorophenyl) porphyrin (MnIIIP and FeIIIP ) chloride were immobilized in mesoporous silica hybrid matrix SBA-15. Silanol groups were modified with (3-aminopropyl)triethoxysilane (APTES) and (3-aminopropyl)diethoxymethylsilane (APDES), generating catalysts called FeP-APSBA, FeP-APMSBA, MnP-APSBA and MnP-APMSBA. A third type of material was prepared from the binding trimethylsilyl groups (TMS) in FeP-APSBA and MnP- APSBA catalysts generating the other two catalysts named FeP-APSBA-TMS and MnP-APSBA-TMS. The materials were characterized by FTIR , DR UV-Vis , TG/TGA SEM , TEM and adsorption and desorption isotherms of N2 (BET/BJH) and to analyze the materials solvent - surface interaction nature the were determined goniometric measurements of surface free energy. Catalysts were evaluated for (Z)- cyclooctene and cyclohexane oxidation mediated by iodosylbenzene (PhIO) as the oxygen donor species to evaluate their catalytic activity as cytochrome P450 biomimetics. Structural parameters were compared to catalytic results related to cage solvent formation and the intermediate species high valence FeIV(O)P+. and MnV(O) P and how these factors affect the yield and selectivity of catalysts. MeP-SBA\'s reactions showed a range of 88-47 % for epoxidation (Z)-cyclooctene and cyclohexane oxidation yielding 2 to 8 % of cyclohexanol and 2 % of cyclohexanone. In the latter case was observed a higher selectivity for alcohol with FeP-SBA\'s.

Certaines métalloenzymes catalysent l’oxydation de petites molécules organiques, dans des conditions douces (par activation du dioxygène à température et pression ambiante). Ce travail a pour but d’améliorer l’utilisation et l’efficacité catalytique des complexes de fer mimant cette activité.D’abord, par fonctionnalisation du ligand, un des complexes les plus efficaces pour catalyser l’oxydation de substrats aromatiques par H2O2, a pu être greffé dans des mésopores de silice. Ce matériau est utilisé comme support de catalyseur, en raison de sa grande surface spécifique et de sa chimie de surface versatile. Par ailleurs, la méthode de synthèse permet de structurer la taille des cavités formées, à l’aide d’un surfactant utilisé comme modèle. Le contrôle du nombre de sites catalytiques sur la surface est rendu possible par la procédure qui exploite le concept du pochoir moléculaire. Le confinement du catalyseur dans les pores pourrait être mis à profit pour former des produits à haute valeur ajoutée. En parallèle, ce complexe a aussi été greffé sur des billes de silices, un matériau moins élaboré pouvant être utilisé pour la dégradation de polluants. L’élaboration de ce type de catalyseurs supportés a nécessité de nombreuses caractérisations : analyses élémentaires, spectroscopies RMN, IR, XPS, UV-vis, RPE, isotherme d’adsorption d’azote, ATG, DRX sur poudre. Différentes méthodes de greffage ont été ainsi développées, et leur efficacité a été comparée. L’activité en catalyse d’oxydation de ces différents systèmes a aussi été évaluée.Concernant le développement des catalyseurs homogènes, le renforcement des positions  des pyridines du ligand a permis l’obtention de nouveaux complexes de fer, possédant une meilleure stabilité pour réaliser des réactions catalytiques en milieu homogène et des propriétés structurales, spectroscopiques, chimiques et catalytiques analogues aux complexes de la même famille.Enfin, un autre complexe de fer a été mis en jeu dans un procédé électrochimique utilisant le dioxygène en présence de protons pour catalyser l’hydroxylation de substrats aromatiques. / Some metalloenzymes catalyze oxidation of small organic molecules in mild conditions (via dioxygen activation at ambient temperature and pressure). This work aims to improve the use and catalytic efficiency of some of the iron complexes mimicking this activity.First, by ligand functionalization, one of the most efficient complexes catalyzing aromatic substrates oxidation by H2O2, was grafted in mesostructured porous silicas. This type of materials was used to support the iron catalyst, because of their large specific area, as well as their versatile surface chemistry. Furthermore, the method of synthesis allows to tune the size of cavities, through the use of surfactant as templates. Control of the number of catalytic sites on surface is made possible by the procedure that exploits the molecular stencil patterning technique. The confinement of catalyst in the pores could be implemented to form products with high added value. In parallel, this complex was also grafted in fumed silicate, a simpler material, that could be used to degradation of polluants. The development of this type of supported catalyst required many caracterisations : elemental analysis, NMR, IR, XPS, UV-vis and EPR spectroscopies, TGA, nitrogen sorption isotherms, powder X-ray diffraction. Different grafting methods have been followed, and their efficacy compared. The catalytic activity of the different systems was also evaluated.Concerning the development of homogenous catalysts, the strengthening of pyridine  positions on the ligand has allowed to obtain new iron complexes, having a better stability to realize catalytic reactions in homogenous condition, and structural, spectroscopic, chemical, catalytic properties similar to the complexes of the same family.Finally, another iron complex has been applied in an electrochemical process using dioxygen in the presence of proton to catalyze hydroxylation of aromatic substrates.