31 |
Interação trófica entre Coleoptera e basidiomas de Polyporales e Hymenochaetales (Fungi : Basidiomycota) / Trophic interaction between Coleoptera and Basidiomes of Polyporales and Hymenochaetales (Fungi: Basidiomycota)Graf, Letícia Vanessa January 2008 (has links)
O consumo de qualquer parte do organismo de um fungo denomina-se fungivoria e são raros os estudos que abordam a temática da interação trófica entre suas estruturas reprodutivas (basidiomas) e os insetos. Mesmo que seja um hábito alimentar freqüente entre os coleópteros, com muitas famílias obrigatoriamente fungívoras, pouco se conhece sobre a estruturação dessa assembléia. Entretanto, sabese que existem preferências por determinadas espécies de fungos, tanto para a postura dos ovos quanto para o próprio consumo. Algumas questões que este estudo aborda referem-se à riqueza e à especificidade dos besouros fungívoros. Adicionalmente investigarei a influência da taxonomia dos fungos, bem como da consistência e do sistema hifal dos basidiomas para o processo de seleção que as espécies de besouros realizam. Também foi verificado se a posição taxonômica dos besouros está relacionada com o grupo de fungos que estes utilizam ou com a consistência dos seus basidiomas. Foram realizadas oito coletas em um ambiente de Floresta Ombrófila Mista no Estado do Rio Grande do Sul, obtendo-se 376 indivíduos das Ordens Polyporales e Hymenochaetales. Estes espécimes foram mantidos individualizados em laboratório por três meses para a constante retirada dos besouros adultos e então dissecados. Todos os fungos que apresentaram besouros fungívoros associados (N = 207) foram identificados e totalizaram 40 espécies. Os coleópteros totalizaram 447 ocorrências e foram classificados em 90 morfoespécies e 20 famílias, sendo Ciidae e Staphylinidae as mais representadas. Os basidiomas foram classificados quanto às suas classes de consistência seguindo um gradiente de durabilidade e rigidez. A riqueza de besouros variou conforme a espécie do hospedeiro e não foram encontrados fatores que influenciam a variação de riqueza de besouros em fungos. A especificidade dos besouros não apresentou relação com a longevidade dos basidiomas. Também se verificou que a posição taxonômica dos fungos, bem como a consistência dos basidiomas, interferem na escolha do hospedeiro pelos besouros. Além disso, se observou que besouros mais relacionados filogeneticamente não utilizam uma assembléia de fungos mais semelhante nem basidiomas com consistências semelhantes. Isso demonstra que a habilidade em consumir as mesmas espécies não está tão relacionada com a filogenia dos besouros como ocorre com os herbívoros. / Fungivory is the consumption of any part of the fungi organism and just a few studies were done about the trophic interactions of its reproductive structures, so called basidiomes, and insects. Even though this is a disseminated habit among Coleoptera, which has many obligated fungivores families, little is known about its community organization. However, there have been works about feeding preferences and oviposing sites of some fungi species. Some of the questions of this study refer to richness and specificity of fungivores beetles on their host. It was also investigated the influence of fungi taxonomy, basidiomes consistency and hyphal system for the selection process of the beetle species, as well as the importance of the taxonomic position of the beetles regarding the host group they use and the basidiome´s consistency. The basidiomes of Polyporales and Hymenochaetales Orders were collected in an Araucaria angustifolia forest of Rio Grande do Sul State. It was obtained 376 fungal individuals, which were kept in the laboratory, individually separated in containers for three months, while the newly emerged beetles were captured, and the fungi were dissected afterwards. All individuals of fungi that had associations (207) were identified (40 species). It was found 447 occurcences of Coleoptera, which were classified in 90 morphospecies belonging to 20 families, with Ciidae and Staphylinidae being the most abundant. The basidiomes where classified by its consistency, following a longevity and hardness gradient. Beetle richness varied among fungal species and no factors that might influence the richness variation in fungi was found. Its specificity did not seem to be related to the longevity of the basidiomes. It was also verified that the fungus taxonomy as well as the consistency of its basidiomes demonstrated some importance for the process of host selection. Regarding the Coleoptera taxonomy, it was not verified that the more phylogenetic related ones use a more similar group of hosts or basidiomes that have similar consistency. This demonstrates that the ability to feed on the same species is not so related to the phylogeny of fungivore beetles as it occurs with herbivores.
|
32 |
COMPARAÇÃO DO ATRITO IN VITRO EM BRAQUETES ESTÉTICOS CONVENCIONAIS E AUTOLIGADOS / A comparison of in vitro friction forces among conventional and self-ligating aesthetic orthodontic bracketsLeal, Rodrigo Severo 25 March 2009 (has links)
Made available in DSpace on 2016-08-03T16:31:14Z (GMT). No. of bitstreams: 1
Paginas 1 a 110.pdf: 2675655 bytes, checksum: ebe1b48d56fd661d5dc8a8a84083c9f1 (MD5)
Previous issue date: 2009-03-25 / The aim of this in vitro study was to compare the friction resistances among conventional steel-ligated and self-ligating aesthetic brackets with different retangular stainless steel archwires sizes at zero and three degrees angulation. 120 brackets of 6 commercial brands (Gemini, Clarity conventional, Transcend, Inspire, Clarity self-ligating, Damon self-ligating) where tested, 20 brackets of each brand. Two brackets were glued on a metallic plate, with angulations of zero and three degrees between them. Retangular stainless steel archwires of 0.017 x 0.025 , 0.019 x 0.025 and 0.021 x 0.025 were tested on a "instron" universal essay machine. Variance analisys and Tukey tests (p<0,05) were run to compare brackets with different archwires sizes and angulation. The study demonstrated that at zero degree angulation the self-ligating brackets produced less friction in relation to convencional ligated bracket in all archwires sizes tested. Clarity self-ligating produces even less friction then aesthetic Damon, except with the 0.021 x 0.025 archwire, where both self-ligating brackets produced statisticly similar results. Inspire bracket had the least friction with 0.019 x0.025 and 0.021 x0.025 . Similar results were observed for the self-ligating brackets in relation to convencionals at three degrees angulation. Among the convencional steel-ligated brackets, Gemini, Clarity, Transcend and Inspire produced the higest friction resistances, in increasing order. In conclusion, the angulation between the brackets increases significatively the friction forces. Furthermore, the self-ligating brackets produces less friction in relation to conventional ligating brackets, and the Clarity self-ligating bracket produced less friction than aesthetic Damon, except with 0.021 x 0.025 archwire size.(AU) / O objetivo do presente estudo consistiu em comparar in vitro o atrito produzido por braquetes estéticos, convencionais e autoligados quando inseridos fios retangulares de aço inoxidável de diferentes dimensões, nas angulações de zero e três graus entre os braquetes. Foram utilizados 120 braquetes de 6 marcas comerciais (Gemini, Clarity convencional, Transcend, Inspire, Clarity autoligado, Damon autoligado), sendo 20 braquetes de cada marca comercial. Para os ensaios laboratoriais, foram colados dois pares de braquetes de cada marca comercial em uma placa metálica, com uma angulação de zero e três graus entre os braquetes. Foram empregados os fios retangulares de aço inoxidável 0,017 x 0,025 , 0,019 x 0,025 e 0,021 x0,025 em uma máquina de ensaios universal Instron . Para a comparação entre os braquetes nos diferentes fios e angulações, foi utilizada a análise de variância e o teste de Tukey (p<0,05). Os resultados demonstraram que na angulação de zero grau, os braquetes autoligados apresentaram menor atrito em relação aos convencionais em todos os fios avaliados, sendo que, o braquete Clarity autoligado apresentou menor atrito estatisticamente significante que o Damon, exceto no fio 0,021 x 0,025 , em que ambos os braquetes autoligados apresentaram atrito estatisticamente semelhante. O braquete Inspire demonstrou o maior atrito em relação aos demais braquetes nos fios 0,019 x0,025 e 0,021 x0,025 . Na angulação de três graus, observou-se resultados semelhantes aos braquetes posicionados sem angulação comparando os braquetes autoligados em relação aos convencionais. Contudo, verificou-se que o atrito entre os braquetes convencionais ocorreu em ordem crescente sendo braquetes Gemini, Clarity convencional, Transcend e Inspire. Pôde-se concluir que a angulação entre os braquetes aumenta consideravelmente o atrito. Além disso, em ambas as angulações, os braquetes autoligados demonstraram menor atrito em relação aos convencionais, sendo que o braquete Clarity autoligado promoveu menor atrito que o Damon estético, exceto no fio 0,021 x 0,025 .(AU)
|
33 |
Interação trófica entre Coleoptera e basidiomas de Polyporales e Hymenochaetales (Fungi : Basidiomycota) / Trophic interaction between Coleoptera and Basidiomes of Polyporales and Hymenochaetales (Fungi: Basidiomycota)Graf, Letícia Vanessa January 2008 (has links)
O consumo de qualquer parte do organismo de um fungo denomina-se fungivoria e são raros os estudos que abordam a temática da interação trófica entre suas estruturas reprodutivas (basidiomas) e os insetos. Mesmo que seja um hábito alimentar freqüente entre os coleópteros, com muitas famílias obrigatoriamente fungívoras, pouco se conhece sobre a estruturação dessa assembléia. Entretanto, sabese que existem preferências por determinadas espécies de fungos, tanto para a postura dos ovos quanto para o próprio consumo. Algumas questões que este estudo aborda referem-se à riqueza e à especificidade dos besouros fungívoros. Adicionalmente investigarei a influência da taxonomia dos fungos, bem como da consistência e do sistema hifal dos basidiomas para o processo de seleção que as espécies de besouros realizam. Também foi verificado se a posição taxonômica dos besouros está relacionada com o grupo de fungos que estes utilizam ou com a consistência dos seus basidiomas. Foram realizadas oito coletas em um ambiente de Floresta Ombrófila Mista no Estado do Rio Grande do Sul, obtendo-se 376 indivíduos das Ordens Polyporales e Hymenochaetales. Estes espécimes foram mantidos individualizados em laboratório por três meses para a constante retirada dos besouros adultos e então dissecados. Todos os fungos que apresentaram besouros fungívoros associados (N = 207) foram identificados e totalizaram 40 espécies. Os coleópteros totalizaram 447 ocorrências e foram classificados em 90 morfoespécies e 20 famílias, sendo Ciidae e Staphylinidae as mais representadas. Os basidiomas foram classificados quanto às suas classes de consistência seguindo um gradiente de durabilidade e rigidez. A riqueza de besouros variou conforme a espécie do hospedeiro e não foram encontrados fatores que influenciam a variação de riqueza de besouros em fungos. A especificidade dos besouros não apresentou relação com a longevidade dos basidiomas. Também se verificou que a posição taxonômica dos fungos, bem como a consistência dos basidiomas, interferem na escolha do hospedeiro pelos besouros. Além disso, se observou que besouros mais relacionados filogeneticamente não utilizam uma assembléia de fungos mais semelhante nem basidiomas com consistências semelhantes. Isso demonstra que a habilidade em consumir as mesmas espécies não está tão relacionada com a filogenia dos besouros como ocorre com os herbívoros. / Fungivory is the consumption of any part of the fungi organism and just a few studies were done about the trophic interactions of its reproductive structures, so called basidiomes, and insects. Even though this is a disseminated habit among Coleoptera, which has many obligated fungivores families, little is known about its community organization. However, there have been works about feeding preferences and oviposing sites of some fungi species. Some of the questions of this study refer to richness and specificity of fungivores beetles on their host. It was also investigated the influence of fungi taxonomy, basidiomes consistency and hyphal system for the selection process of the beetle species, as well as the importance of the taxonomic position of the beetles regarding the host group they use and the basidiome´s consistency. The basidiomes of Polyporales and Hymenochaetales Orders were collected in an Araucaria angustifolia forest of Rio Grande do Sul State. It was obtained 376 fungal individuals, which were kept in the laboratory, individually separated in containers for three months, while the newly emerged beetles were captured, and the fungi were dissected afterwards. All individuals of fungi that had associations (207) were identified (40 species). It was found 447 occurcences of Coleoptera, which were classified in 90 morphospecies belonging to 20 families, with Ciidae and Staphylinidae being the most abundant. The basidiomes where classified by its consistency, following a longevity and hardness gradient. Beetle richness varied among fungal species and no factors that might influence the richness variation in fungi was found. Its specificity did not seem to be related to the longevity of the basidiomes. It was also verified that the fungus taxonomy as well as the consistency of its basidiomes demonstrated some importance for the process of host selection. Regarding the Coleoptera taxonomy, it was not verified that the more phylogenetic related ones use a more similar group of hosts or basidiomes that have similar consistency. This demonstrates that the ability to feed on the same species is not so related to the phylogeny of fungivore beetles as it occurs with herbivores.
|
34 |
Estudo in vitro de braquetes ortodônticos: avaliação biomecânica e liberação de íons /Guimarães, Andréia Cecilia May. January 2008 (has links)
Resumo: Braquetes ortodônticos são feitos de diversos tipos de materiais, tais como, metais, cerâmicas e polímeros. Entre todos os materiais metálicos, o aço inoxidável é o mais empregado devido ao seu baixo custo associado a sua resistência à corrosão. No ambiente oral, eles estão sujeitos a fluídos agressivos e variações de pH, levando a liberação de íons nos tecidos e fluídos. Modificações na superfície destas ligas foram realizados utilizando tratamentos mecânicos, eletroquímicos, químicos e físicos. O carbono amorfo hidrogenado (a-C: H) preparado para técnicas de deposição apresentam muitas propriedades atraentes como alta dureza, serem químicamente inertes e biocompatíveis. Neste estudo in vitro, filmes de a-C:H foram depositados em braquetes ortodônticos pela técnica de deposição química por plasma de radiofreqüência (PECVD) e inibiu a liberação de íons níquel. Após o tratamento de superfície, os braquetes foram colados em incisivos bovinos com uma resina composta e as amostras foram imersas em soro fisiológico por 30 dias à 37 º C. Durante o tempo de imersão as amostras foram lavadas e imersas em flúor diariamente. Antes da imersão, o arranjo estrutural dos filmes foi analisado por espectroscopia de Raman e medidas do ângulo de contato foram realizadas, a fim de avaliar a molhabilidade da superfície. Espectrometria de absorção atômica foi usada para medir a liberação de elementos a partir de amostras e a análise superficial foi realizada em microscópio eletrônico de varredura (MEV). Os resultados mostraram que o revestimento previne a liberação de Ni dos braquetes nos testes estatísticos e o níquel foi liberado de outros grupos sem tratamento de superfície . A análise de variância não indicou diferença significativa entre os grupos depois do ensaio de cisalhamento. / Abstract: Orthodontics brackets have been made from a variety of materials such as metals, ceramics and polymers. Among all the metallic materials, stainless steel are the most popular due low cost associated with reasonable corrosion resistance. In oral environment, they are subject aggressive fluids and pH variation can be leave nickel ions release to body tissues and fluids. Surface modifications of these alloys have been realized using mechanical, electrochemical, chemical and physical treatments. Hydrogenated amorphous carbon (a-C:H) prepared by deposition techniques have very attractive properties such as high hardness, chemical inertness and biocompatibility. In this in vitro study, a-C:H films were deposited on orthodontics brackets by r.f. plasmaenhanced chemical vapour deposition (PECVD) from inhibited nickel ions release. After treatment, brackets were bonded to bovine incisors with a composite resin and samples were immersed in physiological serum for 30 days at 37 ºC. During immersion time samples were brushed and/or immersed in mouthwashes daily. Prior immersion, the structural arrangement of films was probed by Raman spectroscopy and contact angle measurements were carried out in order to evaluate the wettability of surface. Atomic absorption spectrophotometry was used to measure the release of elements from the samples and SEM for surface analysis. Results showed that the coating prevents Ni release of brackets for statistic test and nickel was released for others groups. Analysis of variance no indicated significance different among groups after shear testing. / Orientadora: Ana Paula Rosifini Alves Claro / Coorientador: Maria Cristina Rosifini Alves Resende / Banca: Sandra Giacomi Scheneider / Banca: Maria da Glória Chiarello Mattos / Mestre
|
35 |
On Knots and DNAAhlquist, Mari January 2017 (has links)
Knot theory is the mathematical study of knots. In this thesis we study knots and one of its applications in DNA. Knot theory sits in the mathematical field of topology and naturally this is where the work begins. Topological concepts such as topological spaces, homeomorphisms, and homology are considered. Thereafter knot theory, and in particular, knot theoretical invariants are examined, aiming to provide insights into why it is difficult to answer the question "How can we tell knots appart?". In knot theory invariants such as the bracket polynomial, the Jones polynomial and tricolorability are considered as well as other helpful results like Seifert surfaces. Lastly knot theory is applied to DNA, where it will shed light on how certain enzymes interact with the genome.
|
36 |
Rankin-Cohen Brackets for Hermitian Jacobi Forms and Hermitian Modular FormsMartin, James D. (James Dudley) 12 1900 (has links)
In this thesis, we define differential operators for Hermitian Jacobi forms and Hermitian modular forms over the Gaussian number field Q(i). In particular, we construct Rankin-Cohen brackets for such spaces of Hermitian Jacobi forms and Hermitian modular forms. As an application, we extend Rankin's method to the case of Hermitian Jacobi forms. Finally we compute Fourier series coefficients of Hermitian modular forms, which allow us to give an example of the first Rankin-Cohen bracket of two Hermitian modular forms. In the appendix, we provide tables of Fourier series coefficients of Hermitian modular forms and also the computer source code that we used to compute such Fourier coefficients.
|
37 |
Linear Algebra on the Lie Algebra on Two GeneratorsWebb, Sarah 21 December 2022 (has links)
No description available.
|
38 |
Lieovy grupy a jejich fyzikální aplikace / Lie groups and their physical applicationsKunz, Daniel January 2020 (has links)
In this thesis I describe construction of Lie group and Lie algebra and its following usage for physical problems. To be able to construct Lie groups and Lie algebras we need define basic terms such as topological manifold, tensor algebra and differential geometry. First part of my thesis is aimed on this topic. In second part I am dealing with construction of Lie groups and algebras. Furthermore, I am showing different properties of given structures. Next I am trying to show, that there exists some connection among Lie groups and Lie algebras. In last part of this thesis is used just for showing how this apparat can be used on physical problems. Best known usage is to find physical symmetries to establish conservation laws, all thanks to famous Noether theorem.
|
39 |
Log-diversity and abundance of dead wood dependent bracket fungi and bryophytes, a comparison between spruce woodland key habitats and adjacent production forests in Östergötland, Sweden.Lundgren Lodetti, Mathilda January 2019 (has links)
Dead wood in forests are essential habitat for a wide range of fungal, insects, lichens and bryophyte species. The main threat to dead wood dependent species is lack of substrate, which aggravates their ability to reach and colonize a new substrate. Inventories of woodland key habitats (WKHs) is a method to map forests with high biological value in Sweden, and these areas may benefit dead wood dependent species. The aim of this study was to compare spruce dominated WKHs with adjacent production spruce forests (APFs), regarding (1) log diversity, (2) log characteristics and (3) abundance of selected species on logs. The study was conducted in Östergötland County in Sweden, seven spruce WKHs (≥ 60% spruce) and seven APFs of three different types (two clear-cuts, two dominated by trees < 20 cm and three dominated by trees > 20 cm) were investigated. Data of eight wood dependent species (three bryophytes and five bracket fungi), log diversity, six log characteristics and two environmental factors were collected. In a total area of 4.27 ha, 210 logs (105 logs in WKH and APF each) were studied and the results show that there were significantly higher amount of coarse logs, distribution area of species, number of logs/ha, diameter, decay class and humidity inside WKHs compared with APFs. The total distribution area of species was approximately 85% larger in WKHs. Bark cover was slightly less in WKHs and sun exposure was significantly higher and humidity was lower in clear-cuts. According to the current study, WKHs are important for conservation of wood depending species due to the higher amount and diversity of coarse dead wood. Furthermore, it is necessary to put aside larger amount of coarse dead wood inside production forests, together with changed logging techniques to increase the suitable substrate for dead wood dependent species.
|
40 |
Local controllability of affine distributionsAguilar, CESAR 12 January 2010 (has links)
In this thesis, we develop a feedback-invariant theory of local controllability for affine distributions. We begin by developing an unexplored notion in control theory that we call proper small-time local controllability (PSTLC). The notion of PSTLC is developed for an abstraction of the well-known notion of a control-affine system, which we call an affine system. Associated to every affine system is an affine distribution, an adaptation of the notion of a distribution. Roughly speaking, an affine distribution is PSTLC if the local behaviour of every affine system that locally approximates the affine distribution is locally controllable in the standard sense. We prove that, under a regularity condition, the PSTLC property can be characterized by studying control-affine systems.
The main object that we use to study PSTLC is a cone of high-order tangent vectors, or variations, and these are defined using the vector fields of the affine system. To better understand these variations, we study how they depend on the jets of the vector fields by studying the Taylor expansion of a composition of flows. Some connections are made between labeled rooted trees and the coefficients appearing in the Taylor expansion of a composition of flows. Also, a relation between variations and the formal Campbell-Baker-Hausdorff formula is established.
After deriving some algebraic properties of variations, we define a variational cone for an affine system and relate it to the local controllability problem. We then study the notion of neutralizable variations and give a method for constructing subspaces of variations.
Finally, using the tools developed to study variations, we consider two important classes of systems: driftless and homogeneous systems. For both classes, we are able to characterize the PSTLC property. / Thesis (Ph.D, Mathematics & Statistics) -- Queen's University, 2010-01-11 20:11:45.466
|
Page generated in 0.0247 seconds