L’objectif de ce travail était de mettre au point un modèle de culture cellulaire, afin d’étudier in vitro l’incidence sur la physiologie des cellules pulpaires et en particulier de l’odontoblaste, de biomatériaux utilisés pour traiter les effractions de pulpes dentaires. Ce modèle repose sur l’utilisation de culture sphéroïdes dont la conformation spatiale reproduit plus fidèlement l’environnement in vivo que les cultures bidimensionnelles. Après avoir élaboré le modèle sphéroïde à partir de lignées murines, des expérimentations visant à déterminer la cytotoxicité des matériaux ont été effectuées. Leurs capacités à induire la biominéralisation ont également été évaluées. La dernière partie de ce travail avait pour objectif d’immortaliser des primocultures de cellules pulpaires humaines en transfectant les gènes SV40 et hTERT, afin d’établir une lignée cellulaire / The aim of this study was to develop a cell culture model to assess in vitro the effects on the physiology of pulp cells, in particular the odontoblasts, of biomaterials used to treat dental pulp exposures. This model is based on the use of spheroid culture whose spatial configuration reproduces the in vivo environment more faithfully than do two-dimensional cultures. After developing the spheroid model from mouse lines, experiments to determine the cytotoxicity of the materials were conducted. Their ability to induce bio-mineralisation was also assessed. The last part of this work aimed to immortalise primo-cultures of human pulp cells by transfecting hTERT and SV40 genes, in order to establish a new cell line

Pour la cellule, l’assemblage du cytosquelette d’actine joue un rôle central dans son déplacement, sa division ou sa morphogenèse. Cette réorganisation est orchestrée par des protéines régulatrices et des contraintes mécaniques. Savoir comment les combinaisons de ces actions biochimiques et physiques régulent les différentes architectures d’actine reste un véritable défi.La formine protéine est un régulateur essentiel de l’actine. Ancrée à la membrane, elle assemble les filaments d’actine (nucléation et élongation) présents dans des architectures linéaires et non branchées. La formine est impliquée notamment dans la génération de filopodes, protrusions guidant la locomotion cellulaire.Une propriété remarquable est sa capacité à suivre processivement le bout barbé d’un filament qu’elle allonge, tout en stimulant son élongation en présence de profiline. La régulation de cette processivité de la formine est encore à clarifier. C’est une caractéristique importante, intervenant dans le contrôle de la longueur des filaments, dont les connaissances sont à approfondir.L’étude de cette processivité est facilitée par l’utilisation d’un outil microfluidique novateur pour l’étude de la dynamique de multiples filaments individuels d’actine in vitro. Au sein d’une chambre en PDMS, les filaments sont ancrés à la surface par un seul bout, le reste s’alignant avec le flux. Nous pouvons précisément y changer l’environnement biochimique,tandis que la friction visqueuse sur les filaments permet d’exercer une tension contrôlée sur chacun d’entre eux.Simultanément à l’action de la formine au bout barbé, j’étudie l’effet d’autres protéines ou de la vitesse d’élongation sur sa processivité, en mesurant son taux de détachement. Par ailleurs nous pouvons reproduire l’ancrage membranaire cellulaire en attachant spécifiquement nos formines à la surface. Dans la chambre, par l’intermédiaire du filament qu’elle allonge, nous pouvons alors exercer des forces et en étudier l’effet sur la formine.Premièrement, j’ai étudié l’impact de la protéine de coiffe (CP) sur l’activité de la formine au bout barbé. La liaison de ces deux protéines aubout barbé a jusqu’ici été considérée mutuellement exclusive. Nous avons observé qu’elles peuvent toutefois se retrouver simultanément liées au bout barbé, au sein d’un complexe à courte durée de vie. Ce complexe ternaire est capable de stopper l’activité du bout barbé même si l’affinité d’une protéine est réduite par la présence de l’autre. Nous proposons qu’une compétition entre la protéine de coiffe et la formine régule la dynamique du bout barbé dans des architectures où les longueurs doivent être hautement contrôlées.J’ai ensuite étudié l’influence de divers facteurs sur la processivité. La processivité est très sensible à la présence du sel et à la fraction demarquage fluorescent utilisée dans nos expériences. Nous avons également observé l’effet de la vitesse d’élongation, qui peut être modifiée en changeant la concentration en actine ou en profiline. D’une part, l’actine réduit la processivité, à n’importe quelle concentration de profiline. D’autre part, la concentration en profiline augmente cette processivité,indépendamment du taux d’élongation. Cela suggère qu’une incorporation de monomère diminue la processivité, tandis que la profiline, par sa présence au bout barbé, l’augmente.Enfin, la tension exercée sur les formines abaisse fortement la processivité : quelques piconewtons réduisent la processivité de plusieurs ordres de grandeurs. Cet effet, purement mécanique, prédomine sur les facteurs biochimiques. Ces résultats nous indiquent que les contraintes mécaniques de tension joueraient un rôle prédominant dans le contexte cellulaire. Cette étude nous aide à construire un modèle plus complet de l’élongation processive par les formines.En conclusion, ce projet permet de mieux comprendre le fonctionnement moléculaire de la formine, en particulier le mécanisme de l’élongation processive et de sa régulation / Actin filament assembly plays a pivotal role in cellular processes such as cell motility, morphogenis or division. Elucidating how the actin cytoskeleton is globally controlled remains a complex challenge. We know that it is orchestrated both by actin regulatory proteins and mechanical constraints.The formin protein is an essential actin regulator. Anchored to the cell membrane, it is responsible for the assembly (nucleation and elongation) of actin filaments found in linear and unbranched architectures. It is notably involved in the generation of filopodia protrusions at the leading edge of a motile cell. One important feature is that it processively tracks the barbed end of an actin filament, while stimulating its polymerization in the presence of profilin.Formin processivity and its regulation is not yet completely understood. As an important factor determining the length of the resulting filament, it must be investigated further.A perfect assay to look at formin processivity in vitro is an innovative microfuidics assay coupled to TIRF microscopy, pioneered by the team, to simultaneously track tens of individual filaments. In a designed chamber,filaments are anchored to the surface by one end, and aligned with the solution flow. We can precisely control the biochemical environment of the filaments. Moreover, we can exert and modulate forces on filaments, due to the viscous drag of flowing solutions. By varying chemical conditions during formin action at the barbed end, I investigated how others proteins or the elongation rate can modulate formin processivity, by looking at the detachment rate of formins.Moreover, we can mimic the membrane anchoring in the cell by specifically attaching formins at the surface. In our chamber, through the filament they elongate, we can apply force to formins.In complement to biochemical studies, we then investigate the effect oftension on their processivity.I first investigated the impact of a capping protein on formin action at the barbed end. Their barbed end binding is thought to be mutually exclusive.We measured that the affinity of one protein is reduced by the presence of the other. However we observed they both can bind simultaneously the barbed end, in a transient complex, which block barbed end elongation.Competition of formin and CP would regulate barbed end dynamics in a cell situation where length is tightly controlled.I next studied formin processivity dependence on various parameters. We show that processivity is sensitive to salt and labelling fraction used in our solutions. We also looked at how processivity is affected by the elongation rate, which can either be varied by actin or profilin concentration. On one hand, actin concentration reduces processivity, at any given concentrationsof profilin. On the other hand, raising the concentration of profilin increasesprocessivity, regardless of the elongation rate. This indicates that theincorporation of actin monomers decreases processivity while in contrast,the presence of the profilin at the barbed end increases it.Moreover, tension exerted on formin was observed to largely favor its detachment. In a quantitative matter, the effect of tension prevails over anyothers biochemical factor on processivity : only a few piconewtons decreaseit by several orders of magnitude. This important effect helps us build amore complete model of processive elongation. These results indicate thatmechanical stress is likely to play an important role in a cellular context.In conclusion, this project brings insights into the molecular properties offormin and helps to decipher the mechanism of processive elongation and its regulation.

No description available.

2D semiconductors are one of the most promising materials for next-generation electronics. Realizing continuous 2D monolayer semiconductors with single-crystalline structure at the wafer scale is still a challenge. We developed an epitaxial phase conversion (EPC) process to meet these requirements. The EPC process is a two-step process, where the sulfurization process was carried out on pre-deposited Mo-containing films. Traditionally, two-step processes for 2D MoS2 and other chalcogenides have suffered low-quality film and non-discontinuity at monolayer thickness. The reason was regarded as the low lattice quality of precursor film. The EPC process solves these problems by carefully preparing the precursor film and carefully controlling the sulfurization process. The precursor film in the EPC process is epitaxial MoO2 grown on 2″ diameter sapphire substrate by pulsed laser deposition. This epitaxial precursor contains significantly fewer defects compared to amorphous precursor films. Thus fewer defects are inherited by the EPC MoS2 film. Therefore, EPC MoS2 film quality is much better. The EPC prepared monolayer MoS2 devices to show field-effect mobility between 10 ~ 30 cm2·V-1s-1, which is the best among the two-step process. We also developed a CLAP method further to reduce the defects in the precursor oxide film; thus, in-plane texture in the thicker MoS2 film was eliminated, and a single-crystalline structure was obtained in the wafer-scale MoS2 films. The potentially feasible technique to further improve the 2D film quality is pointed out for our next research plan. Meanwhile, the epitaxial phase conversion process was proposed to be as a universal growth method. Last but not least, we demonstrate several potential applications of the wafer-scale single-crystalline MoS2 film we developed, such as logic circuits, flexible electronics, and seeding layer of van der Waal or remote epitaxial growth.

We recently showed that the Wiskott-Aldrich syndrome protein (WASP) family member,WASH, localizes to endosomal subdomains and regulates endocytic vesicle scission in an Arp2/3-dependent manner. Mechanisms regulating WASH activity are unknown. Here we show that WASH functions in cells within a 500 kDa core complex containing Strumpellin, FAM21, KIAA1033 (SWIP), and CCDC53. Although recombinant WASH is constitutively active toward the Arp2/3 complex, the reconstituted core assembly is inhibited, suggesting that it functions in cells to regulate actin dynamics through WASH. FAM21 interacts directly with CAPZ and inhibits its actin-capping activity. Four of the five core components show distant (approximately 15% amino acid sequence identify) but significant structural homology to components of a complex that negatively regulates the WASP family member, WAVE. Moreover, biochemical and electron microscopic analyses show that the WASH and WAVE complexes are structurally similar. Thus, these two distantly related WASP family members are controlled by analogous structurally related mechanisms. Strumpellin is mutated in the human disease hereditary spastic paraplegia, and its link to WASH suggests that misregulation of actin dynamics on endosomes may play a role in this disorder.

Acetylsalicylic acid (ASA), aspirin, is a renowned NSAID that its role in the process of bone metabolism has recently come to light. However, the influence of ASA on the odontogenesis of human dental pulp cells (HDPCs) remains elusive. In search of materials that would synergize the healing potential of the dental pulp, this study aimed to investigate the role of ASA on the odontogenesis of HDPCs in vitro and the influence of ASA on TGF-ß1 liberation from dentin. HDPCs were cultured in a culture medium with different concentrations of ASA: 25, 50, 75, 100, 200 μg/mL and 0 μg/mL as a control. The mitochondria activity of HDPCs was assessed using an MTT assay. Crystal violet staining and triton were used to evaluate cell proliferation rates. ALP activity was measured with the fluorometric assay. Expressions of DSP and RUNX2 were determined with ELISA. DSP and RUNX2 mRNA levels were measured with RT‐qPCR. Alizarin red staining was conducted to evaluate the mineralized nodule formation. Dentin slices were submerged in PBS (negative control), 17% EDTA (positive control), and ASA before collecting the solution for TGF-ß1quantification by ELISA. The data were analyzed by t tests and ANOVA followed by the Tukey post hoc tests. P values < 0.05 were considered statistically significant. The results showed that 25-50 μg/mL ASA promoted mitochondria activity of HDPCs at 72h (P<0.05) and yielded significantly higher proliferation rates of HDPCs than the control at 14d and 21d (P<0.001). All concentrations of ASA promoted odontogenic differentiation of HDPCs by enhancing the mineralization and the levels of DSP, RUNX2, and their mRNA expression in a dose-dependent manner (P<0.05). Also, ASA yielded significantly higher TGF-ß1 liberation after conditioning dentin for 5min (P<0.001) and 10min (P<0.05). In conclusion, the data suggest that ASA promotes the odontogenic potential of HDPCs and TGF-ß1 liberation from dentin in vitro and might be incorporated into the novel pulp capping materials for dental tissue regeneration.

Farmers around the world aim to use soil with adequate nutrients to produce sufficient and quality crops to the world's ever-growing population. Unbalanced use of nutrients in the soil will lead to soil deficiency, which is usually seen in South and Southeast Asian countries. This soil deficiency is often due to loss of micronutrient(s) within the soil from farming practices. Micronutrient deficiency affects not only plant growth but human health. Plants grown in nutrient deficient soil produce food with nutrient deficiencies, which affect people dependent on these foods for nutrients (Kathmandu, 2004). Nutrient deficient diseases and disorders like malnutrition are often seen in such cases. Current farming practices often involve leaching, mineralization, and bioconversion, which result in 50-70% loss of micronutrients. Smart practices from nanotechnology can lead conventional farming to more sustainable agriculture (Chhippa, 2016). This study aims to improve the dispersibility and uptake of zinc in plants different dual combination of ‘green' capping agents in zinc nanoparticles. The results of this study suggest tomato plants treated with urea coated with 3% Zn (w/w) using NAC-SAL ZnO showed a higher number of leaves and number of fruits set compared to controls.

No description available.

No description available.

Colloidally-stable zero valent iron nanoparticles (nZVI) were synthesized through a classical redox reaction of iron sulfate with minor modifications using cellulose nanocrystals (CNCs) as stabilizers. We obtained spherical nZVI particles with high surface roughness and a mean size of 130nm. Particles remain colloidally stable after more than two months. Cellulose nanocrystals play a dual role in nZVI stability: a foreign surface to encourage stable nucleation over fast aggregation and a stabilizer to prevent iron nanoparticles aggregating into fractal colloids. Our results highlight the impact of the presence of CNCs on the rates and mechanisms of nucleation, growth, aggregation, and aging of nZVI particles, indicating promise in controlling size and morphology of similarly redox-generated nanoparticles. Cellulose nanocrystal-stabilized nZVI nanoparticles demonstrate properties well-suited for enhanced soil and groundwater remediation. //Nanocomposites composed of carboxylated cellulose nanocrystals and iron (Fe-oxCNC) were prepared through a classical redox reaction of iron sulfate using TEMPO-oxidized cellulose nanocrystals (oxCNCs) as a template and stabilizer. Morphological control over Fe-oxCNC nanoparticles was realized by varying the amount of oxCNC added to the redox process. As the molar ratio between oxCNC and Fe was increased from 1 to 8, the morphology of Fe-oxCNC nanoparticles evolved from rounded iron aggregates supported by cellulose nanocrystals to thin film iron-coatings on cellulose nanocrystals. Transmission electron microscopy (TEM), Inductively Coupled Plasma Optical Emission Spectrometry (ICP-OES), and chemical analyses (EDX, EELS) revealed that oxCNCs were coated by iron. Small changes to the density and type of functional groups on the CNC surface have large impacts on the morphology and the oxidation state of adsorbed iron nanoparticles. / Thesis / Master of Applied Science (MASc)