Die vorliegende Arbeit befasst sich mit einem detaillierten Vergleich von Mehrpunkt-Schaltungstopologien mit zentralem Gleichspannungszwischenkreis für den Einsatz in Mittelspannungsanwendungen. Im Rahmen dieser Untersuchungen wird die 3-Level Neutral Point Clamped Spannungswechselrichter Schaltungstopologie (3L-NPC VSC) sowohl mit Multilevel Flying Capacitor (FLC) als auch mit Multilevel Stacked Multicell (SMC) Schaltungstopologien verglichen, wobei unter Verwendung von aktuell verfügbaren IGBT-Modulen Stromrichterausgangsspannungen von 2.3 kV, 4.16 kV und 6.6 kV betrachtet werden. Neben der grundlegenden Funktionsweise wird die Auslegung der aktiven Leistungshalbleiter und der passiven Energiespeicher (Zwischenkreiskondensatoren, Flying Capacitors) für die untersuchten Stromrichtertopologien dargestellt. Unter Berücksichtigung verschiedener Modulationsverfahren und Schaltfrequenzen werden Kennwerte für den Oberschwingungsgehalt in der Ausgangsspannung und dem Ausgangsstrom vergleichend evaluiert. Die installierte Schalterleistungen, die Halbleiterausnutzungsfaktoren, die Stromrichterverlustleistungen sowie die Verlustleistungsverteilungen werden für die betrachteten Stromrichtertopologien detailliert gegenübergestellt und bewertet. / The thesis deals with a detailed comparison of voltage source converter topologies with a central dc-link energy storage device for medium voltage applications. The Three-Level Neutral Point Clamped Voltage Source Converter (3L-NPC VSC) is compared with multilevel Flying Capacitor (FLC) and Stacked Multicell (SMC) Voltage Source Converters (VSC) for output voltages of 2.3 kV, 4.16 kV and 6.6 kV by using state-of-the-art 6.5 kV, 3.3 kV, 4.5 kV and 1.7kV IGBTs. The fundamental functionality of the investigated converter topologies as well as the design of the power semiconductors and of the energy storage devices (Flying Capacitors and Dc-Link capacitors) is described. The installed switch power, converter losses, the semiconductor loss distribution, modulation strategies and the harmonic spectra are compared in detail.

Use of multilevel inverters are inevitable in medium and high voltage drives. This is due to the fact that the multilevel inverters can produce voltages in smaller steps which will reduce the harmonic content and result in more sinusoidal voltages and currents as compared to voltages and currents from two-level inverters. Due to the device limitations, use of two-level inverters is not possible in medium and high voltage drive applications. Though multiple devices can be connected both in series and parallel to achieve two-level operation, the output voltages still suffer from high harmonic content. Multilevel inverters have multiple DC voltage levels with switches that enable one of the voltage steps to be applied to the load. Due to decrease in step size during each switching instant, output voltages and currents of the multilevel inverters have considerably less harmonic content. As the number of levels increase, the switching step reduces thereby the harmonic content also reduces drastically. Due to their advantages, multilevel inverters have gained lot of acceptance in the industry even at lower voltages. The three main configurations that have gained popularity are the neutral point clamped converter, the flying capacitor converter and the cascaded H-bridge converter. Each converter has its own set of advantages and disadvantages. Based on the requirements of various applications, it is possible to fabricate hybrid multilevel topologies that are combinations of the three basic topologies. Researchers around the world have proposed several such converters for diverse applications so as to suit particular requirements like modularity, ease of control, improved reliability, fault tolerant capability etc. The present thesis explores multilevel converters with single DC link to be used for motor drive and grid connected applications. A novel five-level inverter topology formed by cascading a floating capacitor H-bridge module to a regular three-level flying capacitor inverter has been explored in chapter 2. The three-level flying capacitor inverter can generate pole voltages of 0, VDC /2 and VDC . By cascading it with another floating capacitor H-bridge of voltage magnitude VDC /4, pole voltages of 0, VDC /4, VDC/2, 3VDC /4 and VDC . Each of these pole voltage levels can have one or more switching combinations. However each switching combination has a unique effect on the state of the two capacitor voltages. By switching through redundant switching combinations for the same pole voltage, the two capacitors present in each phase can be balanced. The proposed topology also has an advantage that if one of the devices in the H-bridge fails, the topology can still be operated as a regular three-level flying capacitor inverter that can supply full load at rated power by bypassing the faulty H-bridge. This fault tolerant operation of the converter will enable it to be used in applications like traction and marine drives where high reliability is needed. The proposed converter needs a single DC link. All the required voltage levels can be generated from the single DC link. This enables back to back grid connected operation possible where multiple converters can interact with a single DC link. Various pole voltage switching combination and its effect on individual capacitor has been studied. A control algorithm to balance the capacitor voltages by switching through multiple redundancies for the same pole voltage has been developed. The proposed configuration has been implemented in hardware using IGBT H-bridge modules and the control circuitry is realized using DSP and FPGA. The performance of the drive is verified for various frequencies and modulation indices during steady state by running a three phase induction motor at no load. The stability of the drive during transients has been studied by accelerating the machine suddenly at no load and analyzing the performance of the drive. The capacitor voltages are made to deviate from their intended values and the capacitor balancing algorithm has been verified for its ability to bring the capacitor voltages back to their intended values. The experimental results have been presented and discussed in detail in the chapter 2. In the third chapter a common-mode voltage eliminated three-level inverter using a single DC link has been proposed. The power schematic is similar to the one presented in chapter 2. In this chapter the space vector polygon formed by the three phases of the proposed topology has been presented. The common-mode voltage generated by different pole voltage combinations for same space vector location and the redundant switching state combinations has been studied. The pole voltage combinations with zero common mode voltage have been studied. The switching state redundancies for the the pole voltage have been studied. The space vector polygon formed with the pole voltage combinations has been analyzed. A drive is made with the proposed common-mode voltage eliminated inverter. The performance of the drive is tested for various modulation indices and frequencies by running a three phase squirrel cage induction motor at no load. The transient performance is verified by accelerating the motor suddenly and checking the common-mode voltage along with the capacitor voltages. The results have been presented and discussed in detail in chapter 3. This converter has advantages like use of single DC supply, ability to operate as a regular three level converter in case of failure of one of the H-bridges. The work presented in fourth chapter proposes a novel three phase 17-level inverter configuration which utilizes a single DC supply. The rest of voltages are generated using three floating capacitor H-bridges. The redundant switching combinations for generating various pole voltages and their effect on the capacitors have been studied and suitable capacitor balancing algorithm has been developed. The proposed topology has been realized in hardware and the performance of the drive during steady state has been studied by running an induction motor at various modulation indices and frequencies. The transient response of the drive has been observed by accelerating the motor suddenly under no load. The results have been presented in detail in chapter four. This configuration also needs a single DC link. The advantages of this configuration is in case of failure of any devices in the H-bridge, the drive can be operated at reduced number of levels while supplying full load current. This feature helps the drive to be used in fault tolerant applications like marine and traction drives where reliability of the drive is of prime importance. All the topologies that have been presented in the previous chapters have mentioned about the usage of the proposed genre of topologies use single DC link and hence will enable back to back grid tied inverter connection. In the fifth chapter this has has been verified experimentally. The three phase squirrel cage induction motor is driven by using the seventeen-level inverter drive proposed in chapter four. A five-level active front-end is realized by the converter topology proposed in chapter two. The converter is run and the performance of the drive is studied at various modulation indices and speeds of the motor. Various aspects like re-generation operation, acceleration and other aspects of the drive have been studied experimentally and the results are presented in detail. For experimental setup, Semikron SKM75GB12T4 IGBT modules have been used to realize the power topology. These IGBTs are driven by M56972L drivers. The control circuit is realized using TMS320F2812 DSP along with Xilinx Spartan 3 FPGA (XC3S200) has been used. The voltages and currents are sensed using LEM LV-20P and LA 55-P hall effect based sensors.

The main focus of this thesis is on the power electronic converter system challenges associated with the grid integration of variable-renewable-energy (VRE) sources like wave, marine current, tidal, wind, solar etc. Wave energy conversion with grid integration is used as the key reference, considering its high energy potential to support the future clean energy requirements and due the availability of a test facility at Uppsala University. The emphasis is on the DC-link power conditioning and grid coupling of direct driven wave energy converters (DDWECs). The DDWEC reflects the random nature of its input energy to its output voltage wave shape. Thereby, it demands for intelligent power conversion techniques to facilitate the grid connection. One option is to improve and adapt an already existing, simple and reliable multilevel power converter technology, using smart control strategies. The proposed WECs to grid interconnection system consists of uncontrolled three-phase rectifiers, three-level boost converter(TLBC) or three-level buck-boost converter (TLBBC) and a three-level neutral point clamped (TLNPC) inverter. A new method for pulse delay control for the active balancing of DC-link capacitor voltages by using TLBC/TLBBC is presented. Duty-ratio and pulse delay control methods are combined for obtaining better voltage regulation at the DC-link and for achieving higher controllability range. The classic voltage balancing problem of the NPC inverter input, is solved efficiently using the above technique. A synchronous current compensator is used for the NPC inverter based grid coupling. Various results from both simulation and hardware testing show that the required power conditioning and power flow control can be obtained from the proposed multilevel multistage converter system. The entire control strategies are implemented in Xilinx Virtex 5 FPGA, inside National Instruments’ CompactRIO system using LabVIEW. A contour based dead-time harmonic analysis method for TLNPC and the possibilities of having various interconnection strategies of WEC-rectifier units to complement the power converter efforts for stabilizing the DC-link, are also presented. An advanced future AC2AC direct power converter system based on Modular multilevel converter (MMC) structure developed at Siemens AG is presented briefly to demonstrate the future trends in this area.

Die vorliegende Arbeit befasst sich mit einem detaillierten Vergleich von Mehrpunkt-Schaltungstopologien mit zentralem Gleichspannungszwischenkreis für den Einsatz in Mittelspannungsanwendungen. Im Rahmen dieser Untersuchungen wird die 3-Level Neutral Point Clamped Spannungswechselrichter Schaltungstopologie (3L-NPC VSC) sowohl mit Multilevel Flying Capacitor (FLC) als auch mit Multilevel Stacked Multicell (SMC) Schaltungstopologien verglichen, wobei unter Verwendung von aktuell verfügbaren IGBT-Modulen Stromrichterausgangsspannungen von 2.3 kV, 4.16 kV und 6.6 kV betrachtet werden. Neben der grundlegenden Funktionsweise wird die Auslegung der aktiven Leistungshalbleiter und der passiven Energiespeicher (Zwischenkreiskondensatoren, Flying Capacitors) für die untersuchten Stromrichtertopologien dargestellt. Unter Berücksichtigung verschiedener Modulationsverfahren und Schaltfrequenzen werden Kennwerte für den Oberschwingungsgehalt in der Ausgangsspannung und dem Ausgangsstrom vergleichend evaluiert. Die installierte Schalterleistungen, die Halbleiterausnutzungsfaktoren, die Stromrichterverlustleistungen sowie die Verlustleistungsverteilungen werden für die betrachteten Stromrichtertopologien detailliert gegenübergestellt und bewertet.:Inhaltsverzeichnis Liste der Variablen i Liste der Abkürzungen v 1 Einleitung 1 2 Überblick von Mittelspannungsstromrichtertopologien und Leistungshalbleitern 3 2.1 Mittelspannungsumrichtertopologien 3 2.2 Leistungshalbleiter 8 3 Aufbau und Funktion von Mittelspannungsstromrichtertopologien 10 3.1 Neutral Point Clamped Stromrichter (NPC) 10 3.1.1 3-Level Neutral Point Clamped Stromrichter (3L-NPC) 10 3.1.2 Mehrstufige NPC-Umrichter 21 3.2 Flying Capacitor Stromrichter (FLC) 23 3.2.1 3-Level Flying Capacitor Stromrichter (3L-FLC) 23 3.2.2 4-Level Flying Capacitor-Stromrichter (4L-FLC) 33 3.2.3 Mehrstufige Flying Capacitor-Stromrichter (NL-FLC) 39 3.3 Stacked Multicell Stromrichter (SMC) 43 3.3.1 5L-Stacked Multicell Stromrichter (5L-SMC) 43 3.3.2 N-Level Stacked Multicell Umrichter (NL-SMC) 51 4 Modellierung und Auslegung der Stromrichter 59 4.1 Verlustmodell 59 4.1.1 Sperrschichttemperaturen 64 4.2 Auslegung der Leistungshalbleiter 65 4.2.1 Stromauslegung 67 4.2.2 Worst-Case Arbeitspunkte 69 4.3 Auslegung der Zwischenkreiskondensatoren 75 4.3.1 Spannungszwischenkreis 76 4.3.2 Lastseitige Strombelastung und resultierende Spannungswelligkeit im Spannungszwischenkreis 77 4.3.3 Abhängigkeit der Strombelastung und der Spannungswelligkeit im Spannungszwischenkreis vom Frequenzverhältnis mf 95 4.3.4 Netzseitige Zwischenkreiseinspeisung 97 4.3.4.1 Zwischenkreiseinspeisung mit idealisiertem Transformatormodell 98 4.3.4.2 Zwischenkreiseinspeisung mit erweitertem Transformatormodell 101 4.3.5 Simulation des Gesamtsystems 104 4.4 Auslegung der Flying Capacitors 107 4.4.1 Strombelastung der Flying Capacitors 109 4.4.2 Spannungswelligkeit über den Flying Capacitors 113 4.4.3 Abhängigkeit der Spannungswelligkeit der Flying Capacitors vom Frequenzverhältnis mf 124 4.4.4 Auswirkung der Spannungswelligkeit der Flying Capacitors auf die Ausgangsspannungen 126 5 Vergleich der Stromrichtertopologien 129 5.1 Daten für den Stromrichtervergleich 129 5.2 Basis des Vergleiches 132 5.3 Vergleich für einen 2,3 kV Mittelspannungsstromrichter 134 5.3.1 Vergleich bei verschiedenen Schaltfrequenzen 134 5.3.2 Vergleich bei maximaler Trägerfrequenz 142 5.4 Vergleich für einen 4,16 kV Mittelspannungsstromrichter 146 5.4.1 Vergleich bei verschiedenen Schaltfrequenzen 146 5.4.2 Vergleich bei maximaler Trägerfrequenz 153 5.5 Vergleich für einen 6,6 kV Mittelspannungsstromrichter 156 5.5.1 Vergleich bei verschiedenen Schaltfrequenzen 156 5.5.2 Vergleich bei maximaler Trägerfrequenz 162 5.6 Vergleich von 2,3 kV, 4,16 kV und 6,6 kV Mittelspannungsstromrichtern 165 5.6.1 Vergleich bei identischer installierter Schalterleistung SS 165 5.6.2 Vergleich bei einer identischen Ausgangsleistung 167 6 Zusammenfassung und Bewertung 171 Anhang 175 A. Halbleiterverlustmodell 175 Referenzen 177 / The thesis deals with a detailed comparison of voltage source converter topologies with a central dc-link energy storage device for medium voltage applications. The Three-Level Neutral Point Clamped Voltage Source Converter (3L-NPC VSC) is compared with multilevel Flying Capacitor (FLC) and Stacked Multicell (SMC) Voltage Source Converters (VSC) for output voltages of 2.3 kV, 4.16 kV and 6.6 kV by using state-of-the-art 6.5 kV, 3.3 kV, 4.5 kV and 1.7kV IGBTs. The fundamental functionality of the investigated converter topologies as well as the design of the power semiconductors and of the energy storage devices (Flying Capacitors and Dc-Link capacitors) is described. The installed switch power, converter losses, the semiconductor loss distribution, modulation strategies and the harmonic spectra are compared in detail.:Inhaltsverzeichnis Liste der Variablen i Liste der Abkürzungen v 1 Einleitung 1 2 Überblick von Mittelspannungsstromrichtertopologien und Leistungshalbleitern 3 2.1 Mittelspannungsumrichtertopologien 3 2.2 Leistungshalbleiter 8 3 Aufbau und Funktion von Mittelspannungsstromrichtertopologien 10 3.1 Neutral Point Clamped Stromrichter (NPC) 10 3.1.1 3-Level Neutral Point Clamped Stromrichter (3L-NPC) 10 3.1.2 Mehrstufige NPC-Umrichter 21 3.2 Flying Capacitor Stromrichter (FLC) 23 3.2.1 3-Level Flying Capacitor Stromrichter (3L-FLC) 23 3.2.2 4-Level Flying Capacitor-Stromrichter (4L-FLC) 33 3.2.3 Mehrstufige Flying Capacitor-Stromrichter (NL-FLC) 39 3.3 Stacked Multicell Stromrichter (SMC) 43 3.3.1 5L-Stacked Multicell Stromrichter (5L-SMC) 43 3.3.2 N-Level Stacked Multicell Umrichter (NL-SMC) 51 4 Modellierung und Auslegung der Stromrichter 59 4.1 Verlustmodell 59 4.1.1 Sperrschichttemperaturen 64 4.2 Auslegung der Leistungshalbleiter 65 4.2.1 Stromauslegung 67 4.2.2 Worst-Case Arbeitspunkte 69 4.3 Auslegung der Zwischenkreiskondensatoren 75 4.3.1 Spannungszwischenkreis 76 4.3.2 Lastseitige Strombelastung und resultierende Spannungswelligkeit im Spannungszwischenkreis 77 4.3.3 Abhängigkeit der Strombelastung und der Spannungswelligkeit im Spannungszwischenkreis vom Frequenzverhältnis mf 95 4.3.4 Netzseitige Zwischenkreiseinspeisung 97 4.3.4.1 Zwischenkreiseinspeisung mit idealisiertem Transformatormodell 98 4.3.4.2 Zwischenkreiseinspeisung mit erweitertem Transformatormodell 101 4.3.5 Simulation des Gesamtsystems 104 4.4 Auslegung der Flying Capacitors 107 4.4.1 Strombelastung der Flying Capacitors 109 4.4.2 Spannungswelligkeit über den Flying Capacitors 113 4.4.3 Abhängigkeit der Spannungswelligkeit der Flying Capacitors vom Frequenzverhältnis mf 124 4.4.4 Auswirkung der Spannungswelligkeit der Flying Capacitors auf die Ausgangsspannungen 126 5 Vergleich der Stromrichtertopologien 129 5.1 Daten für den Stromrichtervergleich 129 5.2 Basis des Vergleiches 132 5.3 Vergleich für einen 2,3 kV Mittelspannungsstromrichter 134 5.3.1 Vergleich bei verschiedenen Schaltfrequenzen 134 5.3.2 Vergleich bei maximaler Trägerfrequenz 142 5.4 Vergleich für einen 4,16 kV Mittelspannungsstromrichter 146 5.4.1 Vergleich bei verschiedenen Schaltfrequenzen 146 5.4.2 Vergleich bei maximaler Trägerfrequenz 153 5.5 Vergleich für einen 6,6 kV Mittelspannungsstromrichter 156 5.5.1 Vergleich bei verschiedenen Schaltfrequenzen 156 5.5.2 Vergleich bei maximaler Trägerfrequenz 162 5.6 Vergleich von 2,3 kV, 4,16 kV und 6,6 kV Mittelspannungsstromrichtern 165 5.6.1 Vergleich bei identischer installierter Schalterleistung SS 165 5.6.2 Vergleich bei einer identischen Ausgangsleistung 167 6 Zusammenfassung und Bewertung 171 Anhang 175 A. Halbleiterverlustmodell 175 Referenzen 177

Cette thèse vise à élaborer de nouvelles stratégies de commande basées sur la commande prédictive pour le système de génération d’énergie éolienne. La topologie des systèmes de production éolienne basées sur le Générateur Asynchrone à Double Alimentation (GADA) qui convient à des plateformes de génération dans la gamme de puissance de 1.5 à 6 MW est abordée. Du point de vue technologique, le convertisseur à trois niveaux et clampé par le neutre (3L-NPC) est considéré comme une bonne solution pour une puissance élevée en raison de ses avantages: capacité à réduire la distorsion harmonique de la tension de sortie et du courant, et augmentation de la capacité du convertisseur grâce à une tension réduite appliquée à chaque semi-conducteur de puissance. Une description détaillée de la commande prédictive à ensemble de commande fini (FCS-MPC) avec un horizon de prédiction de deux pas est présentée pour deux boucles de régulation: celle liée au convertisseur connecté au réseau et celle du convertisseur connecté au GADA. Le principe de la commande repose sur l’utilisation d’un modèle de prédiction permettant de prédire le comportement du système pour chaque état de commutation du convertisseur. La minimisation d’une fonction de coût appropriée prédéfinie permet d’obtenir la commutation optimale à appliquer au convertisseur. La thèse étudie premièrement les problèmes liées à la compensation du temps de calcul de la commande et au choix et aux pondérations de la fonction de coût. Ensuite, le problème de stabilité de la commande FCS-MPC est abordé en considérant une fonction de Lyapunov dans la minimisation de la fonction de coût. Finalement, une étude sur la compensation des effets des temps morts du convertisseur est présentée. / This thesis aims to elaborate new control strategies based on Model Predictive control for wind energy generation system. We addressed the topology of doubly fed induction generator (DFIG) based wind generation systems which is suitable for generation platform power in the range in 1.5-6 MW. Furthermore, from the technological point of view, the three-level neutral-point clamped (3L-NPC) inverter configuration is considered a good solution for high power due to its advantages: capability to reduce the harmonic distortion of the output voltage and current, and increase the capacity of the converter thanks to a decreased voltage applied to each power semiconductor.In this thesis, we presented a detailed description of finite control set model predictive control (FCS-MPC) with two step horizon for two control schemes: grid and DFIG connected 3L-NPC inverter. The principle of the proposed control scheme is to use system model to predict the behaviour of the system for every switching states of the inverter. Then, the optimal switching state that minimizes an appropriate predefined cost function is selected and applied directly to the inverter.The study of issues such as delay compensation, computational burden and selection of weighting factor are also addressed in this thesis. In addition, the stability problem of FCS-MPC is solved by considering the control Lyapunov function in the design procedure. The latter study is focused on the compensation of dead-time effect of power converter.

Indiana University-Purdue University Indianapolis (IUPUI) / This research proposes state-of-the-art multilevel converter topologies and their modulation strategies, the implementation of a conventional flying-capacitor converter topology up to four-level, and a new four-level flying-capacitor H-Bridge converter confi guration. The three phase version of this proposed four-level flying-capacitor H-Bridge converter is given as well in this study. The highlighted advantages of the proposed converter are as following: (1) the same blocking voltage for all switches employed in the con figuration, (2) no capacitor midpoint connection is needed, (3) reduced number of passive elements as compared to the conventional solution, (4) reduced total dc source value by comparison with the conventional topology. The proposed four-level capacitor-clamped H-Bridge converter can be utilized as a multilevel inverter application in an electri fied railway system, or in hybrid electric vehicles. In addition to the implementation of the proposed topology in this research, its experimental setup has been designed to validate the simulation results of the given converter topologies.