Esta dissertação versa sobre o processo de construção da identidade a partir da questão religiosa de um grupo que se auto afirma Associação Evangélica da Missão Israelita do Novo Pacto Universal-AEMINPU, popularmente conhecidos como Israelitas, estabelecidos no Alto Solimões, na religião de fronteira do Brasil com o Peru. A questão principal dessa dissertação está centrada na prerrogativa de uma congregação religiosa originada no Peru adquirir uma notória expansão em meio ao espaço político e geográfico dentro deste país, e como estes dois aspectos, tanto o geográfico quanto o político, facilitaram na expansão deste movimento em terras brasileiras, alcançando assim região do Alto Solimões. De forma mais específica perceber a chegada dos primeiros Israelitas, como foram construídos, e constituídos, os primeiros espaços e a estruturação da religião no lado brasileiro. Buscou-se compreender os processos de identificação e autoafirmação dos integrantes desta religião, assim como os sentidos atribuídos à sua instalação na fronteira amazônica motivada por uma perspectiva milenarista e sua integração na sociedade benjaminense, especificamente sua inserção na economia local. / This dissertation is about the process of identity building based on a religious group called Associação Evangélica da Missão Israelita do Novo Pacto Universal-AEMINPU, locally known as Israelitas, established in the Alto Solimões region, in the Brazilian - Peruvian border. The core of this dissertation is that, in the prerogative of a religious congregation originated in Peru conquering a konwn expansion in the political and geographical aspects, it made it easy for this movement to expand throughout the brazilian land, reaching the Alto Solimões region. Specifically, perceiving the arrival of the first Israeli, how their spaces were built and conceived and their structure in the Brazilian side. We have tried to understand the processes of identification and self-assertion of the members of this religion, as well as the meaning given to their settlement in the Amazonian border, motivated by a Millenarianism perspective and their envolviment with the Benjaminian society, especially their insertion in the local economy.

Neste trabalho mostramos que dado um domínio exterior de classe C0 contido em uma superfície umb lica de H3; com curvatura média constante H 2 [0; 1); existe uma família de gracos de Killing com curvatura média constante H: O bordo de cada um destes gracos está contido nesta superfície umbílica e a norma do gradiente da função no bordo pode ser prescrita por um certo valor s 0. / In this paper we show that given an exterior domain of class C0 contained in an umbilical surface of H3; with constant mean curvature H 2 [0; 1); there exists a family of Killing graphs with constant mean curvature H: The boundary of each of these graphs is contained in this umbilical surface and the norm of the gradient of the function in the boundary can be prescribed by a certain value s 0:

Sick building syndrome (SBS) is a particular concern in places with inadequate ventilation and frequently attributed to chemical contaminants such as volatile organic compounds (VOCs)released from indoor sources that are frequently encountered in everyday life such as adhesives, carpeting, upholstery, manufactured wood products, copy machines, pesticides, cleaning agents inside buildings, plumbing vents, and painting. Furthermore, it is a major issue for modern human beings who spend most of their time indoors or must stay indoors for self-isolation due to special circumstances such as the coronavirus disease-19 (COVID-19) pandemic that occurred in 2019 and 2020. Main indoor VOCs are trichloroethylene (TCE), benzene, toluene, and para-xylene (p-xylene). In general, these compounds are not present in indoor spaces at acute concentrations, but prolonged exposure to these compounds can have chronic health effects such as allergic sensitization, increased cancer risks, and respiratory diseases. In this study, the adsorption process with various advantages has been applied to remove VOC’s using commercially available hydrophobic adsorbents. The hydrophobic adsorbents can contribute to reducing the possibility of chemical adsorption (chemisorption) of moisture from the air, which can decrease the capacity of adsorbent by clogging the pores. The adsorption of these major VOCs was investigated in this work for three major types of industrial hydrophobic adsorbents: activated carbons, zeolites, and polymer. This study will show the investigation into finding the most promising hydrophobic adsorbent for removal of TCE, benzene, toluene, and p-xylene, which are the main VOCs found indoors. The promising hydrophobic adsorbent has been determined by comparing Henry’s law constants and heat of adsorption values for the different adsorbents, which were estimated by using a concentration pulse chromatographic technique by utilizing a gas chromatograph equipped with a flame ionization detector. For all adsorbents, Henry’s law constants at room temperature of p-xylene were always the highest followed by toluene, benzene, and TCE. For all adsorbates, Henry’s law constants at room temperature of AC BPL and HiSiv 3000 were higher than the other hydrophobic adsorbents. For a developing modern society dealing with a pandemic, this study can contribute to producing the optimized gas masks and indoor filters for the removal of indoor air pollutants, which can help people who suffer from SBS. It can also help society for taking preventative actions towards dealing with SBS.

This research study examined campus recreation intramural training techniques used to prepare sports officials. The top 10 techniques reported by the sample (n = 52) are presented. Use of National Intramural-Recreational Sports Association (NIRSA) training materials was found to have a significant positive relationship with overall official training program satisfaction. Intramural coordinators who self-rated as unsatisfied with training program also rated their program significantly less effective when compared to intramural coordinators who indicated satisfaction with their training program. Further inquiry determined that the responding professionals ranked officials’ traits and abilities similar in importance, with confidence, knowledge, and decision making as most important. There were no differences in the preferred officials’ trait ratings when compared to overall program satisfaction.

This thesis deals with the study of the lifetime of charge carriers in perovskite single crystals. The principle of perovskite solar cells is formulated, their main structures are characterized and the history of the development of perovskite solar cells is summarized, especially in terms of efficiency. The properties of perovskite single crystals with perovskite solar cells are compared. For measurement purposes, transient methods, impedance spectroscopy, load characteristics and the dependence of sensitivity and photocurrent on the wavelength of incident radiation are described. The practical part deals with the method of measuring and evaluating the lifetime of charge carriers in the investigated perovskite single crystals.

The focus of this diploma thesis is on theoretical basics of dynamic electroneurostimulation, which is an effect of electrical signal on acupuncture points of skin. This technology is used in devices made by russian DiaDENS company. Practical part of this thesis covers design of human skin impedance model. Especially derivation from three-element Cole-Cole model. Elementary, there is design of equivalent circuit of constant phase element and its incorporation into circuit. Then this circuit is designed, simulated and produced. Resulting product is used as a load to measure the characteristics of the DiaDENS device.

The objective of this dissertation is the application of Minkowskian cross-section measures (i.e., section and projection measures in finite-dimensional linear normed spaces over the real field) to various topics of geometric convexity in Minkowski spaces, such as bodies of constant Minkowskian width, Minkowskian geometry of simplices, geometric inequalities and the corresponding optimization problems for convex bodies. First we examine one-dimensional Minkowskian cross-section measures deriving (in a unified manner) various properties of these measures. Some of these properties are extensions of the corresponding Euclidean properties, while others are purely Minkowskian. Further on, we discover some new results on the geometry of a simplex in Minkowski spaces, involving descriptions of the so-called tangent Minkowskian balls and of simplices with equal Minkowskian heights. We also give some (characteristic) properties of bodies of constant width in Minkowski planes and in higher dimensional Minkowski spaces. This part of investigation has relations to the well known \emph{Borsuk problem} from the combinatorial geometry and to the widely used monotonicity lemma from the theory of Minkowski spaces. Finally, we study bodies of given Minkowskian thickness ($=$ minimal width) having least possible volume. In the planar case a complete description of this class of bodies is given, while in case of arbitrary dimension sharp estimates for the coefficient in the corresponding geometric inequality are found. / Die Dissertation befasst sich mit Problemen fuer spezielle konvexe Koerper in Minkowski-Raeumen (d.h. in endlich-dimensionalen Banach-Raeumen). Es wurden Klassen der Koerper mit verschiedenen metrischen Eigenschaften betrachtet (z.B., Koerper konstante Breite, reduzierte Koerper, Simplexe mit Inhaltsgleichen Facetten usw.) und einige kennzeichnende und andere Eigenschaften fuer diese Klassen herleitet.

Eine Reihe 3-(p-X-phenyl)-Thiophenmonomeren (X = -H, -CH3, -OCH3, -COCH3, -COOC2H5, -NO2) wurde elektrochemisch polymerisiert, um Filme zu erhalten, die umkehrbar reduziert und oxidiert werden konnten (n-und p-dotiert wurden). Die Oxidationspotentiale der Monomere und die formalen Potentiale der n und p-Dotierprozesse der Polymere wurden mit Resonanz- und induktiven Effekten der Substituenten (Hammett konstanten) am Phenylring sowie semiempirisch errechneten Bildungswärmen der Monomereradikalkationen korreliert. Außerdem wurden die Oxidationspotentiale mit den Ionisierungspotentialen der Monomere verglichen, die über die Dichtefunktionialtheorie (DFT) errechnet wurden, die der Energie für das Erzeugen der Radikalkationen entsprechen. Um theoretische Grundlagen für die Einstufen-Bildung regioregulär -konjungierter Oligo- und Polythiophene zu erhalten, wurden die elektronischen Zustände von 3-Phenylthiophen-Derivaten anhand von Molekülorbitalberechnungen auf Grundlage der Dichtefunktionaltheorie mit Becke’s Drei-Parameter-Funktion (B3LYP), sowie mit den Basissätzen 6-31G(d) und 3-21G(d) erklärt. Die Reaktivität der Verknüpfung von mono- und oligo-3-Phenylthiophenen wurde von den berechneten ungepaarten Elektronenspindichten der entsprechenden Radikal-Anionen abgeleitet. Die Ionisierungspotentiale, die den Energien zur Erzeugung der Radikal-Anionen während der Oxidation entsprechen, wurden abgeschätzt. Die aus den 3-Phenylthiophenen entstandenen regioselektiven Hauptprodukte können gut durch die Größe der Spindichten erklärt werden. Da die Verknüpfungsreaktion an der zwei-Position des Thiophnrings (C-2) sterisch durch die Phenylgruppe und den Thiophenring gehindert ist, startet die Initiierung der 3-Phenylthiophene über die Bildung eines Kopf-Schwanz-Dimers. Folglich spielt das Kopf-Schwanz-Dimer eine wichtige Rolle bei den Wachstumsreaktionen der 3-Phenylthiophene. Die Ursache dafür liegt darin, dass das Kopf-Schwanz-Dimer in 5-Position die höchste Spin-Dichte besitzt und die Wahrscheinlichkeit einer Kopf-Kopf-Verknüpfung aufgrund der sterischen Hinderung zwischen dem Thiophenring und der Phenylgruppe gering ist. Polymerfilme von 3-Phenylthiophenderivaten, die durch elektrochemische Polymerisation synthetisiert wurden, sind in situ und ex situ durch Resonanz-Raman-Spektroskopie bei verschiedenen Anregungswellenlängen, sowie durch in situ und ex situ UV-Vis Spektroskopie analysiert wurden. Die Entwicklung der in situ UV-Vis-Spektren der Polymer von 3-Phenylthiophene nach der Dotierung wird durch ähnliche Eigenschaften gekennzeichnet, wie für viele Polythiophene mit einem hohen Grad der Konjugation beobachtet. Während der schrittweisen Oxidation der Poly-3-phenylthiophen Filme verringert sich die Intensität der Absorption wegen des Überganges bei 450-566 nm und ein neues ausgedehntes Absorptionsband, das auf (bi)polaron Zustände bezogen wird erscheint bei ungefähr 730-890 nm. Andererseits wird während der Oxidation (p-Dotierung) des Poly3-phenylthiophen Filmes eine blau/hypsochrome Verschiebung für beide Absorptionsbänder beobachtet . Es wird durch die Tatsache erklärt, dass ein Polymer eine Verteilung der Kettenlängen enthält und die längste Polymer kette (dessen Absorption bei niedriger Energie auftritt), bei niedrigeren Potentialen zu oxidieren beginnt. Die elektrochemischen Bandlücken der Derivate von 3-Phenylthiophen sind durch zyklische Voltametrie gemessen worden. Der Effekt der Substituenten auf den Oxidations-/Reduktions- potentiale wird besprochen. Bei Bandlücken, die durch zyklische Voltammetrie erhalten wurden, hat sich herausgestellt, dass sie im Allgemeinen höher liegen als optische Bandlücken. Erste Resultate der in situ Resonanz-Raman-Spektroskopie, von dem elektrochemisch erzeugten Polymerderivate von 3-Phenylthiophen Filmen auf einer Platinelektrode, in einer organischen Elektrolytlösung, werden berichtet. Beobachtete Raman Banden werden zugewiesen; gegründet auf diesen Resultaten werden die zuvor angenommenen molekularen Strukturen diskutiert. / A series of 3-(p-X-phenyl) thiophene monomers (X= –H, –CH3, –OCH3, –COCH3, –COOC2H5, –NO2) was electrochemically polymerized to furnish polymer films that could be reversibly reduced and oxidized (n- and p-doped). The oxidation potentials of the monomers and formal potentials of the n- and p-doping processes of polymers were correlated with resonance and inductive effects (Hammett constants) of the substituents on the phenyl ring as well as the semiempirically calculated heats of formation of the monomer radical cations. Moreover, the oxidation potentials of the monomers were correlated with the ionization potentials of the monomers calculated via density functional theory (DFT), which correspond to the energies for generating radical cations during oxidative processes. For obtaining a theoretical basis for the one-step formation of regioregular –conjugated oligo-and polythiophenes, the electronic states of 3-phenylthiophene derivatives were elucidated by molecular orbital calculations using density functional theory with the Becke-type three parameters functional (B3LYP), the 6-31G(d), and 3-21G(d) basis sets. The reactivity for coupling reaction of mono- and oligo-3-phenylthiophenes are inferred from the calculated unpaired electron spin densities of the respective radical cations, and the ionization potentials which correspond to the energies for generating radical cations during oxidative processes were estimated. The major regioselective products of the oligomerization of 3-phenylthiophene can be well understood in terms of the magnitude of spin densities. Since the steric hindrance between the phenyl group and thiophene ring interferes with the coupling reaction occurring between 2-postions (C–2) of thiophene rings, the initiating reaction of 3-phenylthiophene is generaton of a head-to-tail (HT) dimer. Thus, the head-to-tail (HT) dimer plays an important role in the propagation reactions of 3-phenylthiophene. This originates from the highest spin density at the 5- position of the HT dimer and low probability of the HH coupling due to the steric hindrance between thiophene ring and phenyl group. Polymer films of the 3-phenylthiophene derivatives prepared by electrochemical polymerization were analyzed, in situ and ex situ, with resonance Raman spectroscopy using several excitation wavelengths as well as in situ and ex situ UV-Vis-spectroscopy. The evolution of the in situ UV-Vis-spectra of poly 3-phenylthiophene derivatives upon doping is characterized by similar features as observed for many polythiophenes with high degree of conjugation. During stepwise oxidation of the poly-3-phenylthiophene films the intensity of the absorption due to the transition around 450–566 nm decreases and a new broad absorption band related to (bi)polaron states appears around 730-890 nm. On the other hand, during the oxidation (p-doping) of the poly-3-phenylthiophene films a blue/hypsochromic shift is observed for both absorption bands. It is explained by the fact that a polymer contains a distribution of chain lengths, and the longest polymer chains (the absorption of which occurs at lower energies) start to oxidize at lower potentials. The electrochemical bandgaps of 3-phenylthiophene derivatives have been measured by cyclic voltammetry. The effect of substituents on the oxidation / reduction potentials is discussed. Bandgaps obtained by cyclic voltammetry have been found to be in general higher than optical bandgaps. Preliminary results of in situ resonance Raman spectroscopy of electrochemically generated poly-3-phenylthiophene derivatives films on a platinum electrode exposed to an organic electrolyte solution are reported. Observed Raman bands are assigned; based on these results previously suggested molecular structures are discussed.

Capillary zone electrophoresis was used for chiral separation of eleven diquat derivatives. These N-heteroaromatic dications containing structural motif of 2,2'-bipyridine have recently been studied for their interesting electrochemical properties as well as for the axial chirality of their molecules. The combination of these properties could potencially lead to interesting applications in the future. For enantioseparation of diquats (DQ) commercially available randomly sulfated α-, β-, and γ-cyclodextrins with high degree of substitution were used. A succesfull chiral separation was achieved using all of the three sulfated cyclodextrins as chiral selectors (CS). Baseline enantioseparation was achieved for 82 %, 91 % respectively 100 % of the analyzed DQ in the presence of HS-α-CD, HS-β-CD, HS-γ-CD respectively. The highest separation efficiency and resolution were obtained in the backround electrolyte containing 22 mmol/L NaOH, 35 mmol/L H3PO4 (pH2,5) and 6 mmol/L HS-β-CD. Using three available nonracemic DQ an identification of the particular M- and P-enantiomers was done for the three corresponding DQ structures. Apparent stabillity constants of complexes of the DQ derivatives with above mentioned cyclodextrins as CS were determined by means of capillary affinity electrophoresis. The stability...

The first part of this dissertation deals with the application of a luminescence quenching method to measure diffusion and permeation coefficients of oxygen in polymers. Most luminescence oxygen sensors do not follow linearity of the Stern-Volmer (SV) equation due to heterogeneity of luminophore in the polymer matrix, thus the complexity of data analysis is increased. To circumvent this limitation, inverted fluorescence microscopy is utilized in this work to investigate the SV response of the sensors at the micron-scale. In these diffusion experiments, oxygen concentration is measured by luminescence changes in regions with high SV constants and good linearity. Thus, we avoid numerical complexity of combining nonlinear SV equation with a diffusion model. This technique allows us to measure oxygen diffusion properties in different type of polymers like transparent, opaque, free-standing polymers and polymers that cannot be cast into free standing films and polymer composites. In the second part of this thesis, we have explored the effect of Ag-Cu alloy nanoparticles on the emission intensity of luminophores at their close proximity. Alloy nanoparticles offer additional degrees of freedom for tuning their optical properties by altering atomic composition and atomic arrangement and thus can be an attractive option for manipulating signal of a wide range of luminophores. In this work, surface plasmon resonance spectrum of Ag-Cu alloy nanoparticles deposited by sputtering was easily tuned in wide wavelength range by varying one experimental condition- annealing temperature. Large metal enhanced luminescence for different luminophores viz Alexa Fluor 594 and Alexa Fluor 488 were achieved at the vicinity of Ag-Cu nanoparticles when maximum spectral overlap between SPR spectra of Ag-Cu nanoparticles and the emission and absorption spectra of the luminophores occur. We also studied the effect of composition of Ag-Cu nanoparticles synthesized by the polyol process on the luminescence of low quantum yield dye Cy3. In the third part of this thesis, quenching effect of Cu nanoparticles on CdSe/ZnS nanocrystal quantum dots has been explored. As Cu nanoparticles have comparable dielectric properties with gold nanoparticles, they are expected to show similar quenching effects. It was found that Cu is an efficient quencher of fluorescence from CdSe/ZnS quantum dots and the quenching effect is due to resonance energy transfer from quantum dots to Cu nanoparticles.