1 |
Mechanical Characteristics and Adherence of Corrosion Products on Mild SteelPrieto Nieto, Claudia L. January 2019 (has links)
No description available.
|
2 |
Localized CO<sub>2</sub> Corrosion in Horizontal Wet Gas FlowSun, Yuhua 17 April 2003 (has links)
No description available.
|
3 |
The Simulation and Study of Conditions Leading to Axial Offset Anomaly in Pressurized Water ReactorsHawkes, Joshua Mahlon 03 December 2004 (has links)
Axial offset anomaly (AOA) in pressurized water reactors (PWR) refers to deviation of the measured neutron flux in the top half of the core from the predicted values. Among other difficulties, AOA reduces the shutdown margin, and may force the plant to reduce power output. AOA is believed to be caused by three related phenomena occurring in the core while operating at full power: sub-cooled nucleate boiling concentrated mainly in the upper half of the core, corrosion product deposition on the cladding surface (crud), and the deposition of boron within the porous crud layer in regions of vigorous sub-cooled boiling.
This study replicates the conditions within the PWR primary coolant; specifically, the temperature, pressure, peak surface heat flux, coolant velocity and water chemistry are simulated in order to produce prototypical crud on an electrically heated Zircaloy-4 test element. At the conclusion of each test run, the heated Zircaloy-4 test element is rapidly isolated from the coolant in order to trap any soluble boron species that may be present in the crud layer. The results of this investigation indicate that prototypical crud with significant boron deposition can be produced. The deposited boron compound has been determined to be lithium tetraborate (Li2B4O7). Comparative experiments have been run to determine the effect of coolant pH, concentration and type of additives, and duration of exposure on the thickness of the crud deposit. The data obtained in this investigation can be used to validate mechanistic models for crud deposition and AOA in pressurized water reactors.
|
4 |
Atmospheric corrosion of zinc-aluminum and copper-based alloys in chloride-rich environments : Microstructure, corrosion initiation, patina evolution and metal releaseZhang, Xian January 2014 (has links)
Fundamental understanding of atmospheric corrosion mechanisms requires an in-depth understanding on the dynamic interaction between corrosive constituents and metal/alloy surfaces. This doctoral study comprises field and laboratory investigations that assess atmospheric corrosion and metal release processes for two different groups of alloys exposed in chloride-rich environments. These groups comprise two commercial Zn-Al alloy coatings on steel, Galfan™ (Zn5Al) and Galvalume™ (Zn55Al), and four copper-based alloys (Cu4Sn, Cu15Zn, Cu40Zn and Cu5Zn5Al). In-depth laboratory investigations were conducted to assess the role of chloride deposition and alloy microstructure on the initial corrosion mechanisms and subsequent corrosion product formation. Comparisons were made with long-term field exposures at unsheltered marine conditions in Brest, France. A multitude of surface sensitive and non-destructive analytical methods were adopted for detailed in-situ and ex-situ analysis to assess corrosion product evolution scenarios for the Zn-Al and the Cu-based alloys. Scanning electron microscopy and energy dispersive spectroscopy (SEM/EDS) were employed for morphological investigations and scanning Kelvin probe force microscopy (SKPFM) for nobility distribution measurements and to gain microstructural information. SEM/EDS, infrared reflection-absorption spectroscopy (IRAS), confocal Raman micro-spectroscopy (CRM) and grazing incidence x-ray diffraction (GIXRD) were utilized to gain information on corrosion product formation and possibly their lateral distribution upon field and laboratory exposures. The multi-analytical approach enabled the exploration of the interplay between the microstructure and corrosion initiation and corrosion product evolution. A clear influence of the microstructure on the initial corrosion product formation was preferentially observed in the zinc-rich phase for both the Zn-Al and the Cu-Zn alloys, processes being triggered by microgalvanic effects. Similar corrosion products were identified upon laboratory exposures with chlorides for both the Zn-Al and the Cu-based alloys as observed after short and long term marine exposures at field conditions. For the Zn-Al alloys the sequence includes the initial formation of ZnO, ZnAl2O4 and/or Al2O3 and subsequent formation of Zn6Al2(OH)16CO3·4H2O, and Zn2Al(OH)6Cl·2H2O and/or Zn5(OH)8Cl2·H2O. The patina of Cu sheet consists of two main layers with Cu2O predominating in the inner layer and Cu2(OH)3Cl in the outer layer, and with a discontinuous presence of CuCl in-between. Additional patina constituents of the Cu-based alloys include SnO2, Zn5(OH)6(CO3)2, Zn6Al2(OH)16CO3·4H2O and Al2O3. General scenarios for the evolution of corrosion products are proposed as well as a corrosion product flaking mechanism for some of the Cu-based alloys upon exposure in chloride-rich atmospheres. The tendency for corrosion product flaking was considerably more pronounced on Cu sheet and Cu4Sn compared with Cu15Zn and Cu5Al5Zn. This difference is explained by the initial formation of zinc- and zinc-aluminum hydroxycarbonates Zn5(OH)6(CO3)2 and Zn6Al2(OH)16CO3·4H2O on Cu15Zn and Cu5Al5Zn, corrosion products that delay the formation of CuCl, a precursor of Cu2(OH)3Cl. As a result, the observed volume expansion during transformation of CuCl to Cu2(OH)3Cl, and the concomitant flaking process of corrosion products, was less severe on Cu15Zn and Cu5Al5Zn compared with Cu and Cu4Sn in chloride-rich environments. The results confirm the barrier effect of poorly soluble zinc and zinc-aluminum hydroxycarbonates Zn5(OH)6(CO3)2 and Zn6Al2(OH)16CO3·4H2O, which results in a reduced interaction between chlorides and surfaces of Cu-based alloys, and thereby reduced formation rates of easily flaked off corrosion products. From this process also follows reduced metal release rates from the Zn-Al alloys. / Bättre molekylär förståelse för metallers atmosfäriska korrosion kräver en fördjupad kunskap i det dynamiska samspelet mellan atmosfärens korrosiva beståndsdelar och metallytan. Denna doktorsavhandling omfattar laboratorie- och fältundersökningar av korrosions- och metallfrigöringsprocesser av två grupper av legeringar som exponerats i kloridrika atmosfärsmiljöer: två kommersiella Zn-Al beläggningar på stål, Galfan™ (Zn med 5% Al, förkortat Zn5Al) och Galvalume™ (Zn55Al), samt fyra kopparbaserade legeringar (Cu4Sn, Cu15Zn, Cu40Zn och Cu5Zn5Al). Undersökningar har genomförts i renodlade laboratorie-miljöer med för-deponerade NaCl-partiklar i en atmosfär av varierande relativ fuktighet. Syftet har varit att utvärdera betydelsen av kloriders deposition och legeringarnas mikrostruktur på korrosionsmekanismen samt bildandet av korrosionsprodukter. Jämförelser av korrosionsmekanismer har även gjorts efter flerårsexponeringar av samma legeringar i en marin fältmiljö i Brest, Frankrike. Undersökningarna har baserats på ett brett spektrum av analysmetoder för detaljerade studier dels under pågående atmosfärisk korrosion (in-situ), och dels efter avslutad korrosion (ex-situ). Legeringarnas mikrostruktur och tillhörande variation i ädelhet hos olika faser har undersökts med svepelektronmikroskopi och energidispersiv röntgenmikroanalys (SEM/EDS) samt med en variant av atomkraftsmikroskopi (engelska: scanning Kelvin probe force microscopy, SKPFM). Korrosionsprodukternas tillväxt har analyserats in-situ med infraröd reflektions-absorptionsspektroskopi (IRAS), samt morfologi och sammansättning av bildade korrosionsprodukter ex-situ med SEM/EDS, konfokal Raman mikro-spektroskopi (CRM) samt röntgendiffraktion vid strykande ifall (GIXRD). Det multi-analytiska tillvägagångssättet har medfört att det komplexa samspelet mellan de skilda legeringarnas mikrostruktur, korrosionsinitiering och bildandet av korrosionsprodukter kunnat studeras i detalj. En tydlig påverkan av mikrostruktur på det initiala korrosionsförloppet har kunnat påvisas. Korrosionsinitieringen sker företrädesvis i mer zinkrika faser för såväl Zn-Al- som Cu-Zn-legeringar och orsakas av mikro-galvaniska effekter mellan de mer zinkrika, mindre ädla, faserna och omgivande faser. Deponerade NaCl-partiklar påskyndar den lokala korrosionen oberoende av mikrostruktur. Snarlika sekvenser av korrosionsprodukter har kunnat påvisas såväl efter laboratorie- som fältexponeringar. För Zn-Al-legeringar bildas först ZnO, ZnAl2O4 och/eller Al2O3, därefter Zn6Al2(OH)16CO3·4H2O och Zn2Al(OH)6Cl·2H2O och/eller Zn5(OH)8Cl2·H2O. På ren koppar bildas ett inre skikt dominerat av Cu2O, ett mellanskikt av CuCl och ett yttre skikt med i huvudsak Cu2(OH)3Cl. Beroende på legeringstillsats har även SnO2 och Zn5(OH)6(CO3)2 kunnat identifieras. En mekanism för flagning av korrosionsprodukter på kopparbaserade legeringar i kloridrika atmosfärer har utvecklats. Tendensen för flagning har visat sig vara mycket mer uttalad på ren Cu och Cu4Sn än på Cu15Zn och Cu5Al5Zn. Skillnaden kan förklaras med hjälp av det tidiga bildandet av Zn5(OH)6(CO3)2 och Zn6Al2(OH)16CO3·4H2O på Cu15Zn och Cu5Al5Zn som fördröjer bildandet av CuCl, en föregångare till Cu2(OH)3Cl. Därigenom hämmas även den observerade volymexpansionen som sker när CuCl omvandlas till Cu2(OH)3Cl, en process som visar sig vara den egentliga orsaken till att korrosionsprodukterna flagar. Resultaten bekräftar barriäreffekten hos de mer svårlösliga faserna Zn5(OH)6(CO3)2 och Zn6Al2(OH)16CO3·4H2O, vilken dels resulterar i en minskad växelverkan mellan klorider och de legeringsytor där dessa faser kan bildas, och dels i en reducerad metallfrigöringshastighet. / <p>QC 20140915</p> / Autocorr, RFSR-CT-2009-00015 Corrosion of heterogeneous metal-metal assemblies in the automotive industry / Atmospheric corrosion and environmental metal dispersion from outdoor construction materials
|
5 |
Étude du mécanisme de corrosion atmosphérique à long terme des aciers : nouvelles stratégies de protection des aciers du patrimoine culturel / Studying the mechanisms of long-term atmospheric corrosion of low alloy steel : new strategies for protection of cultural heritage artefactsFaiz, Hadri 07 March 2012 (has links)
La thèse porte sur l'étude de la compréhension des mécanismes de corrosion atmosphérique à long terme des alliages ferreux. Les applications sont doubles : d'une part, l'entreposage multi-barrières des déchets nucléaires en surface pendant plusieurs centaines d'années, et d'autre part, la préservation et conservation des objets du patrimoine. Dans un premier axe d'étude, une caractérisation fine du système de produits de corrosion est nécessaire afin de déterminer les phases en présence, leur localisation et leur rôle dans les mécanismes. Cela a nécessité de travailler sur des objets issus des sites archéologiques de référence afin de prélever des échantillons d'études. Dans un second axe d'étude, la réactivité de ces phases et leur comportement électrochimique dans les conditions de corrosion doit être déterminée précisément. Il est alors nécessaire de combiner des études sur phases de référence et sur les objets archéologiques eux-mêmes. La localisation des sites de réduction de l'oxygène dans les objets archéologiques doit être déterminée, après les avoir remis quelques mois en corrosion dans des milieux contenant des traceurs judicieux (l'oxygène 18O2), à l'aide des méthodes nucléaires adhoc. En dernier axe, l'identification de ces processus moteur devrait permettre de proposer de nouvelles méthodes d'inhibition de la corrosion à long terme. Cela concerne uniquement le patrimoine / The present report relates to the understanding of long term atmospheric corrosion mechanisms of low alloy steels which are necessary for various applications such as the interim storage of nuclear waste, and the conservation of cultural heritage artefacts. At a first stage, it may be necessary to characterize ancient corrosion system in order to identify the reactive phases in the rust layers, their localisation and their role in the mechanism. In that purpose, the work on objects reference archaeological sites (analogues) can help to take sample of studies. At a second stage, the electrochemical behaviour and their reactive of the phases constitutive of the corrosion layer must be determined precisely. In that field, it is necessary to combine the study of the pure phases and the powders taken on the analogues. The localisation of oxygen reduction sites in the rust layer is a very pertinent tool. To that end, specific experiments have been set up to re-corrode the ancient samples in marked medium (using 18O2), were investigated by nuclear reaction analysis. Finally, the identification of these newly-formed phases give precious information to develop new methods of inhibition of long term corrosion. It concerns only the heritage
|
6 |
Nouveaux alliages zinc-terres rares pour des applications anticorrosion : élaboration, propriétés et traitements de surfaces / New zinc-rare earth alloys for corrosion applications : preparation, properties and surface treatmentsGuessoum, Khadoudj 14 June 2012 (has links)
De nouveaux alliages Zn-TR1-5 %mass.(TR = Ce, La et Mischmetal : Ce 75%/La25%) ont été synthétisés par fusion sous atmosphère contrôlée et coulés sous forme de plaques. Dans ces nouveaux matériaux, les terre rare sont localisées exclusivement dans des phases intermétalliques dispersées de manière homogène dans la matrice de zinc : Zn11Ce, Zn13La ou Zn11Ce1-xLax and Zn13CeyLa1-y. Le comportement électrochimique de ces nouveaux alliages a été étudié dans un milieu corrosif de référence simulant les conditions atmosphériques. En parallèle, les phases intermétalliques pures Zn11Ce and Zn13La ont été synthétisées et leur influence électrochimique a été évaluée par voltamétrie et couplage galvanique. Les résultats montrent que les deux phases intermétalliques sont des sites cathodiques préférentiels de la réduction du dioxygène et induisent une inhibition cathodique de la corrosion des alliages Zn-TR par rapport au zinc pur. Ce phénomène est plus marqué dans le cas des alliages au lanthane. Dans le cas spécifique des alliages au cérium, une inhibition anodique a également été observée et corrélée avec une modification chimique des produits de corrosion (composés majoritairement d'hydrozincite). En fait, une faible quantitéhomogène de cérium a pu être mise en évidence dans la couche de corrosion par spectrométrie dispersive en longueur d'onde. D'après les résultats d'expériences de précipitation contrôlée de sels de cérium et zinc en milieu carbonaté, la présence de cérium dans la couche de corrosion et son caractère protecteur pourraient être attribués à la formation d'un composé mixte double lamellaire zinc-cérium. L'addition de moins de 2%mass. de cérium ou lanthane permet d'améliorer la résistance à la corrosion du zinc. Cependant, lorsque la teneur en terre-rare augmente, l'effet de couplage galvanique devient plus important et rend les alliages moins résistants que le zinc pur / New Zn-RE1-5 wt.% alloys (RE=Ce, La and Mischmetal: Ce 75%/ La 25%) were synthesized by melting under controlled atmosphere and cast in plates. In these materials, rare earth metal are exclusively present in intermetallic phases homogeneously dispersed in the zinc matrix: Zn11Ce, Zn13La or Zn11Ce1-xLax and Zn13CeyLa1-y. The electrochemical behavior of these new alloys was investigated in a reference corrosivemedium. In parallel, the pure intermetallic phases Zn11Ce and Zn13La were synthesized and their electrochemical influence was studied by voltametry and galvanic coupling. Results show that both intermetallic phases act as preferential cathodic sites of dioxygen reduction and induce a cathodic inhibition of the corrosion of the Zn-RE alloys by comparison with pure zinc. This phenomenon is much more significant in the case of lanthanum containing alloys. In the specific case of cerium addition to zinc, an anodic inhibition was also observed and correlated with a chemical modification of the corrosion products (mainly made of hydrozincite). Actually, low quantities of cerium (less than 1 at.%) have been detected homogeneously in the corrosion layer by wave-length dispersive spectrometry. From results of controlled precipitation experiments of cerium and zinc salts performed in carbonated medium, the presence of cerium in the corrosionlayer and its protective character could be attributed to the formation of a mixed double lamellar zinc-cerium product. Therefore, addition to zinc of less than 2 wt.% of cerium or lanthanum allow to improve the corrosion resistance of zinc. However, by increasing the rare earth content in the alloys, the galvanic coupling phenomenon becomes more important and makes the alloys less resistant than pure zinc
|
7 |
Influence of Calcium and Magnesium Ions and their Carbonate Scales on CO2 Corrosion of Mild SteelMansoori, Hamed 02 June 2020 (has links)
No description available.
|
Page generated in 0.0574 seconds