The nuclear receptor superfamily is responsible for regulating the expression of genes involved in development, reproduction and metabolism. These transcription factors control the expression of their target genes through the binding of small molecule regulators to their ligand binding domains. Classical nuclear receptors include the steroid receptors, which bind endocrine hormones and have been important targets of pharmaceutical intervention. However, approximately one half of the human nuclear receptors remain orphans and are without known cognate ligands. Focusing on the Drosophila orthologues of these orphan receptors, this project used mass spectrometry to identify the chemical diversity associated with the receptors following expression in recombinant systems. In a genome-wide screen of Drosophila nuclear receptors, this approach identified co-purifying molecules with a number of receptors. The physiological relevance of these putative ligand/receptor pairs was determined through biochemical analysis, in vivo characterization and structure determination. Ligand(s) or the ligand state was identified for the Drosophila receptors: DHR3, DHR96, E75, Ftz-f1 and USP. Of these, three were validated through the efforts of this project, and independent groups confirmed the remaining two. The most significant findings were the discoveries that the fly nuclear receptor E75 is regulated by heme, gas and redox, and that there is a similar regulatory scheme in the human orthologues, Reverbα and β. Furthermore, crystallization of the heme-bound Rev-erbβ ligand binding domain was also achieved, and this provided key insights into the mechanism of ligand regulation for the Rev-erbs. This project highlighted the role of nuclear receptors in metabolic surveillance. The ligands/signals identified in association with these receptors include: cholesterol, dehydrocholesterol, heme, NO, CO, redox and phospholipids. Unlike the classical steroid hormones, these are not dedicated signaling molecules, but instead are key substrates or products of metabolism. In the context of nuclear receptor signaling, I hypothesize that these metabolites serve as metabolic indicators/signals in the regulation of development and metabolism. Furthermore, four of these Drosophila receptors comprise the ecdysone-response pathway in the developing fly. Taken together, this suggests that both the metabolic state of the organism and steroid hormones drive nuclear receptor regulation of development.

Bereits kurz nach Ende des zweiten Weltkriegs, als vergleichsweise große Mengen hochreiner Seltener Erden (SE) für die Wissenschaft bereit standen, wurde erkannt, dass die SE und deren Verbindungen eine Vielzahl bis dahin nicht untersuchter bzw. gänzlich unbekannter physikalischer Phänomene bergen. Zu diesen zählen insbesondere die magnetischen Ordnungen, der KONDO-Effekt, quantenkritische Punkte, das Schwere-Fermionen Verhalten und die Supraleitung. Es konnte teilweise ein drastischer Einfluss leichter Änderungen der chemischen Zusammensetzung auf die physikalischen Eigenschaften dieser Stoffe beobachtet werden. Den Schwerpunkt der vorliegenden Arbeit bilden die detaillierte röntgenographische Aufklärung der Kristallstruktur sowie die Untersuchung des Einflusses dedizierter Variationen der chemischen Zusammensetzung auf Struktur und Eigenschaften wichtiger Vertreter dieser Substanzklasse. Ein besonderer Akzent liegt hierbei auf der Charakterisierung von modulierten Kristallen. Für die Aufklärung der Struktur wird ein breites Spektrum physikalischer Messmethoden, insbesondere die Röntgendiffraktometrie, eingesetzt. Vorgestellt werden orientierte Fremdphaseneinschlüsse im System Y-Ni-B-C, die Ausbildung inkommensurabel geordneter Vakanzen im System Ce-Si, der Einbau von Stapelfehlern sowie eine kommensurable Ordnung von Übergangsmetall-Atomen (ÜM) im System SE-ÜM-Si und eine lagenspezifische Besetzung im System Y-Mn-Fe-O, deren Aufklärung erstmals berichtet wird. Es wird gezeigt, welche Konsequenzen die strukturellen Besonderheiten für ausgewählte physikalische Eigenschaften zur Folge haben. Diese Arbeit hat das Ziel, einen Überblick über die möglichen „Antworten“ der Kristallstruktur der Seltenerd-Übergangsmetall-Verbindungen auf Variationen der chemischen Zusammensetzung zu geben. / Even shortly after World War II, as large amounts of ultrapure rare earths (RE) became available for scientific research, a large reservoir of peculiar phenomena was uncovered. These had not been investigated before or were completely unknown. Examples of these phenomena are, magnetic ordering, the KONDO effect, quantum critical points, heavy fermion behaviour, as well as superconductivity. A strong influence of small variations of the chemical composition on the physical properties had been observed. The main focus of the present thesis is the detailed elucidation of the crystal structure of fundamental representatives of this class of substances, as well as the influence of dedicated variations of the chemical composition on their structure and properties. In particular, the characterisation of modulated crystals is an important facet. A large spectrum of physical methods, especially X-ray diffraction, is employed in the investigations. Results on oriented intergrowth in the Y-Ni-B-C system, incommensurately ordered vacancies in the Ce-Si system, incorporation of stacking faults as well as commensurately ordered transition metal atoms (TM) in the RE-TM-Si system and site specific occupancy in the Y-Mn-Fe-O system are presented. Their elucidation is reported for the first time. It will be shown which consequences the structural peculiarities will have on the physical properties. An objective of this thesis is to give an overview of the possible “answers“ that can be obtained with regard to the influence of the crystal structure of rare earth transition metal compounds on deviations of the chemical composition.

La structure bronze quadratique de tungstène, grâce à sa flexibilité cristallochimique, est une candidate légitime pour le développement de matériaux fonctionnels. L’étude des propriétés diélectriques, pyroélectriques, et ferroélectriques de céramiques de formulation Ba2NdFeNb4-xTaxO15 montre un crossover relaxeur-ferroélectrique-paraélectrique, avec une hystérèse thermique de la transition ferroélectrique. L’étude structurale des monocristaux relaxeurs Ba2LnFeNb4O15 (Ln=La, Pr, Nd, Sm, Eu), obtenus par la méthode du flux, a mis en évidence une structure modulée. L’affinement de la structure de base prouve l’existence de moments dipolaires dans le plan ab (dus à une distorsion des octaèdres [NbO6]). Afin d’établir un lien entre la structure cristalline et les propriétés d’un composé dérivé du multiferroïque MnWO4, la croissance en four à image de Mn0,85Mg0,15WO4 a été entreprise avec succès. / Tetragonal Tungsten Bronze structure, thanks to its compositional flexibility, is a legitimate candidate for the development of functional materials. Study of dielectric, pyroelectric, and ferroelectric properties of Ba2NdFeNb4-xTaxO15 ceramics reveals a relaxor-ferroelectric-paraelectric crossover, with thermal hysteresis of the ferroelectric transition. Structural analysis of Ba2LnFeNb4O15 (Ln=La Pr, Nd, Sm, Eu), relaxor single crystals obtained by flux method, highlighted a modulated structure. Refinement of the basic structure proves the existence of a dipolar moment in the ab plane (induced by a distortion of [NbO6] octahedra). In order to establish a correlation between the crystal structure and the properties of a compound derived from multiferroic MnWO4, the crystal growth in image furnace of Mn0,85Mg0,15WO4 was successfully undertaken.

Made available in DSpace on 2014-12-17T14:07:09Z (GMT). No. of bitstreams: 1 JoseFTJ_TESE.pdf: 4834280 bytes, checksum: 1a618560296186081bd6c34117d226be (MD5) Previous issue date: 2012-07-04 / Coordena??o de Aperfei?oamento de Pessoal de N?vel Superior / Thin commercial aluminum electrolytic and passed through reactions was obtained with anodic alumina membranes nanopores. These materials have applications in areas recognized electronic, biomedical, chemical and biological weapons, especially in obtaining nanostructures using these membranes as a substrate or template for processing nanowires, nanodots and nanofibers for applications noble. Previous studies showed that the membranes that have undergone heat treatment temperature to 1300? C underwent changes in morphology, crystal structure and optical properties. This aim, this thesis, a study of the heat treatment of porous anodic alumina membranes, in order to obtain and to characterize the behavior changes structures during the crystallization process of the membranes, at temperatures ranging between 300 and 1700? C. It was therefore necessary to mount a system formed by a tubular furnace resistive alumina tube and controlled environment, applying flux with special blend of Ag-87% and 13% N2, in which argon had the role of carrying out the oxygen nitrogen system and induce the closing of the pores during the densification of the membrane. The duration of heat treatment ranged from 60 to 15 minutes, at temperatures from 300 to 1700? C respectively. With the heat treatment occurred: a drastic reduction of porosity, grain growth and increased translucency of the membrane. For the characterization of the membranes were analyzed properties: Physical - thermogravimetric, X-ray diffraction, BET surface area; morphological - SEM, EDS through compositional and, optical absorbance, and transmittance in the UV-VIS, and FTIR. The results using the SEM showed that crystallization has occurred, densification and significant changes in membrane structure, as well as obtaining microtube, the BET analysis showed a decrease in specific surface area of the membranes has to 44.381 m2.g-1 to less than 1.8 m2.g-1 and in the analysis of transmittance and absorbance was found a value of 16.5% in the range of 800 nm, characteristic of the near infrared and FTIR have confirmed the molecular groups of the material. Thus, one can say that the membranes were mixed characteristics and properties which qualify for use in gas filtration system, as well as applications in the range of optical wavelength of the infra-red, and as a substrate of nanomaterials. This requires the continuation and deepening of additional study / L?minas delgadas de alum?nio comercial passaram por rea??es eletrol?ticas e obtiveram-se membranas de alumina an?dica com nanoporos. Estes materiais t?m reconhecidas aplica??es nas ?reas eletr?nicas, biom?dicas, qu?micas e biol?gicas, principalmente, na obten??o de nanoestruturas utilizando estas membranas como substrato ou molde para processamento de nanofios, nanopontos e nanofibras para aplica??es nobres. Estudos anteriores apontaram que as membranas que passaram por tratamentos t?rmicos at? a temperatura de 1300? C, sofreram altera??es na morfologia, na estrutura cristalina e nas propriedades ?pticas. O objetivo deste trabalho foi o estudo do tratamento t?rmico de membranas de alumina an?dica porosas, com o intuito de obter e caracterizar as altera??es de comportamento das estruturas, durante o processo de cristaliza??o das membranas, em temperaturas que variaram entre 300 e 1700? C. Assim, foi necess?rio montar um sistema formado por um forno resistivo tubular e tubo de alumina com ambiente controlado, aplicando fluxo com mistura especial de Ar-87% e N2-13%, no qual o arg?nio teve o papel de carrear o oxig?nio para fora do sistema e o nitrog?nio de induzir o fechamento dos poros, durante a densifica??o das membranas. A dura??o dos tratamentos t?rmicos variou de 60 a 15 minutos, para as temperaturas de 300 at? 1700? C respectivamente. Com o tratamento t?rmico ocorreu redu??o dr?stica da porosidade, crescimento do gr?o e aumento da translucidez da membrana. Para a caracteriza??o das membranas, foram feitas an?lises das propriedades: f?sica - termogravim?trica; difra??o de raios-X, ?rea superficial BET; morfol?gica - MEV, composicional atrav?s do EDS; e, ?ptica - transmit?ncia e absorb?ncia no UV-VIS e FTIR. Os resultados por meio do MEV mostraram que ocorreu cristaliza??o, densifica??o e mudan?as significativas na estrutura das membranas, bem como, a obten??o de microtubo; a an?lise de BET constatou uma diminui??o na ?rea superficial espec?fica das membranas que passou de 44,381m2.g-1, para menos de 1,8m2.g-1; na an?lise de transmit?ncia e absorb?ncia foi encontrado um valor de 16,5 % na faixa de 800nm, caracter?stico do infravermelho pr?ximo e no FTIR foram confirmadas os grupos moleculares do material. Assim, pode-se afirmar que as membranas apresentaram caracter?sticas mistas e propriedades que as qualificam para o uso em sistema de filtra??o de gases, bem como, de aplica??es ?ticas na faixa do comprimento de onda do Infravermelho, e como substrato de nanomateriais. Isto requer a continuidade e aprofundamento em estudos complementares

Made available in DSpace on 2014-10-09T12:36:59Z (GMT). No. of bitstreams: 0 / Made available in DSpace on 2014-10-09T13:56:24Z (GMT). No. of bitstreams: 1 04491.pdf: 3155069 bytes, checksum: aa854e4a23f31eb334f216ec1ea726c2 (MD5) / Tese (Doutoramento) / IPEN/T / Instituto de Pesquisas Energeticas e Nucleares - IPEN/CNEN-SP

[pt] O foco do presente estudo é desenvolvimento de uma heteroestrutura de dois semicondutores com capacidade de reduzir a taxa de recombinação elétron/buraco mediante uma intensa separação de carga, e ao mesmo tempo sendo sensível ao espectro de luz visível. A separação de carga estaria sendo alcançada por meio da injeção de elétrons livres dentro da banda de condução (BC) do TiO2 na forma de anatásio, provenientes do orbital molecular mais alto ocupado (HOMO) da acetilacetona (Acac), ligada às partículas de anatásio, seguida da sua injeção dentro dos orbitais d desocupados do Fe3+ localizados dentro da banda de energia proibida das nanofolhas de ferrititanatos. Ao mesmo tempo a absorção da luz visível poderia ser assegurada através das nanofolhas de ferrititanatos, considerando-se a interação dos níveis energéticos do Fe3+ com a luz e as bandas de valência e condução, bem como pela formação de complexo de transferência de carga (CTC), entre as nanopartículas de anatásio e Acac. Os nanohíbridos mesoporosos (as heteroestruturas) são produzidos pelas diferentes rotas de junção de nanofolhas de ferrititanato, obtidas da areia mineral ilmenítica e posteriormente esfoliadas, com nanopartículas de TiO2 modificadas com acetilacetona, estes útlimos formando CTC. As técnicas de caraterização empregadas tais como adsorção-dessorção de N2, espectroscopia de emissão de fotoluminescência (PL) e espectroscopia de refletância difusa (DRS), entre outras, confirmaram a formação das heteroestruturas mesoporosas sensíveis à luz visível e com forte mecanismo de separação de cargas. A fotodegradação do gás poluente NO no espectro de luz-visível por meio de vários nanohíbridos mesoporosos (fotocatalisadores) mostrou-se bem sucedida, exibindo uma eficiência até 7 vezes superior em comparação à atividade do material fotocatalítico padrão TiO2 (P-25 da Degussa). / [en] This work focues on the development of a heterostructure composed by two semiconductors, capable to decrease the electron/hole recombination rate through a robust charge separation, and at the same time, this nanohybrid is sensitive to visible light spectrum. The charge separation is achieved by the injection of free electrons within the conduction band (BC) of TiO2 in anatase form, which come from the highest-occupied-molecular-orbital (HOMO) of acetylacetone (Acac), linked to the anatase nanoparticles, followed by the injection into unoccupied Fe3+ d-orbital within band-gap energy of the ferrititanate nanosheets. Additionally, the absorption of visible light could be assured by ferrititanate nanosheets, considering the interaction of the energy levels of Fe3+ with visible light and the valence and conduction bands, as well as, the formation of the charge transfer complex (CTC), between the anatase nanoparticles and Acac. The mesoporous nanohybrids (called also as heterostructures) were produced by different routes of junction of two components: i) ferrititanate nanosheets, which were synthesized from ilmenite mineral sands, and then they were exfoliated into single layers and ii) TiO2 nanoparticles, modified with Acac, which formed the CTC. The characterization techniques, such as N2 adsorption-desorption, photoluminescence emission spectroscopy (PL) and diffuse reflectance spectroscopy (DRS), and so on, confirmed the formation of the mesoporous heterostructures sensitive to visible light and with a robust mechanism of charge separation. The photodegradation of NO pollutant gas within the visible light spectrum through several mesoporous nanohybrids (photocatalysts) demonstrated being well succeeded, exhibiting an efficiency more than seven times higher than the activity benchmark TiO2 (Degussa P-25) photocatalyst.

Hydrocarbon chains are a basic component in a number of systems as diverse as biological membranes, phospholipids and polymers. A better understanding of the physical properties of n-alkane chains should provide a better understanding of these more complex systems. With this aim, vibrational spectroscopy has been extensively used. This technique, sensitive to molecular details, is the only one able to both identify and quantify conformational disorder present in paraffinic systems. To achieve this, methyl deformations have been widely used as "internal standards" for the normalisation of peak areas. However, in the case of n-alkanes with short chain length, such as n-C[44]H[90] for example, the infrared spectra recorded at liquid nitrogen temperature and reported here show the sensitivity of these latter peaks to the various crystal structures formed. Indeed, the main frequencies of the symmetric methyl bending mode were found between 1384 cm[-1] and 1368 cm[-1] as a function of the crystal form. Changes in the frequency of the first order of the L.A.M. present in the Raman spectra were also observed. At higher temperatures, non all-trans conformers, inferred from different infrared bands present in the wagging mode region, were found to be essentially placed at the end of the n-alkane chains. At the monoclinic phase transition, the concentration of end-gauche conformers, proportional to the area of the infrared band at 1342 cm[-1], increases abruptly. On the contrary, in the spectra recorded at liquid nitrogen temperature no such band is observed. We also studied the degree of disorder in two purely monodisperse long chain n-alkanes, namely n-C[198]H[398] and n-C[246]H[494]. The chain conformation as well as the tilt angle of the chains from the crystal surfaces were determined by means of low frequency Raman spectroscopy and S.A.X.S. measurements on solution-crystallised samples. The increase in the number of end-gauche conformers which was expected to occur with the increase of the tilt angle as a function of the temperature was not detected due to a perfecting of the crystals. Indeed, due to successive heating and cooling to -173°C, the concentration of non all-trans conformers was found to decrease within the crystals. Their numbers were found to be up to six times higher in n-C[198]H[398] crystallised in once folded form than when crystallised in extended form. The C-C stretching mode region of the spectra was used to identify the chain conformation and to estimate the length of the all-trans stem passing through the crystal layers at -173°C. The transition between once folded and extended form crystals was indicated by the presence of additional bands in this region at 1089 cm[-1], 1078 cm[-1] and 1064 cm[-1]. Some of those bands may be related to the fold itself. At the same time, a strong decrease of the intensity of the infrared bands present in the wagging mode region was observed. Finally, the triple layered structure proposed on the basis of X-ray measurements obtained from the crystals of a binary mixture of long chain n-alkanes, namely n-C[162]H[326] and n-C[246]H[494], was confirmed from the study of the C-C stretching mode region of the infrared spectra.

Title: Variations of actinide magnetism in uranium-base hydrides and other selected systems. Author: Anna Maria Adamska Department / Institute: Department of Condensed Matter Physics Supervisor of the doctoral thesis: Doc. RNDr. Ladislav Havela, CSc., the Department of Condensed Matter Physics Faculty of Mathematics and Physics Charles University, Prague, Czech Republic and Assoc. Prof. Dr. hab. Nhu-Tarnawska Hoa Kim Ngan, Institute of Physics, Pedagogical University, Kraków, Poland. Abstract: Actinide magnetism was studied in three different types of systems. Variations of magnetic properties of UTGe hydrides as a function of hydrogen concentration prove that doping of U intermetallics by interstitial hydrogen leads to stronger magnetic properties, primarily caused by an increase of the inter-uranium separation. Sputter-deposited UFe2+x films, which are derived from the UFe2 Laves phase but have an amorphous structure, exhibit an increase of the Curie temperarture (to more than 400 K) with the Fe excess, which could not be achieved in the bulk. This is understood as a result of the prominent role of the 3d magnetism of Fe. Notoriously weakly magnetic plutonium was studied in the form of the alloy in the ζ-phase, which exists between 35 and 70 % U in Pu. Its susceptibility increases in a comparison to pure...

Submitted by Alison Vanceto (alison-vanceto@hotmail.com) on 2016-09-21T11:44:57Z No. of bitstreams: 1 DissATLM.pdf: 2134527 bytes, checksum: 09a60cc0cd82cc3847658de04d5cac0f (MD5) / Approved for entry into archive by Marina Freitas (marinapf@ufscar.br) on 2016-09-21T18:19:49Z (GMT) No. of bitstreams: 1 DissATLM.pdf: 2134527 bytes, checksum: 09a60cc0cd82cc3847658de04d5cac0f (MD5) / Approved for entry into archive by Marina Freitas (marinapf@ufscar.br) on 2016-09-21T18:20:01Z (GMT) No. of bitstreams: 1 DissATLM.pdf: 2134527 bytes, checksum: 09a60cc0cd82cc3847658de04d5cac0f (MD5) / Made available in DSpace on 2016-09-21T18:20:11Z (GMT). No. of bitstreams: 1 DissATLM.pdf: 2134527 bytes, checksum: 09a60cc0cd82cc3847658de04d5cac0f (MD5) Previous issue date: 2012-08-24 / Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES) / This work is a contribution to the study of the crystal, molecular and supramolecular structures as well as the conformation in vacuum of decahydrophenantrene derivatives. (4aS,4bR,7R,10aS)-3,7-Dimethyl-10a- (propan-2-yl)-1,4,4a,4b,5,6,7,8,10,10a-decahydrophenanthrene-1,4-dione (Compound 1) In this compound, C19H26O2, the A ring adopts a chair conformation, whereas the B and C rings both adopt distorted half-chair conformations with the quaternary C atom common to both rings lying 0.577 (3) and 0.648 (3) Å out of the approximate plane defined by the remaining five C atoms (r.m.s.deviations = 0.1386 and 0.1156 Å for the B and C rings, respectively). Molecules are assembled in the crystal through C—H…O interactions involving both carbonyl O atoms, which lead to supramolecular chains aligned along the b axis. (4R,4aS,4bS,7R,10aR )-4-Hydroxy-4a,7-dimethyl-2-(propan-2- yl)-1,4,4a,4b,5,6,7,8,10,10a-decahydrophenanthren-1-one (Compound 2) In this compound, C19H28O2, the A ring adopts a chair conformation, and each of the B and C rings adopts a distorted half-chair conformation with the methine C atom in the CH2C(H)C( O) residue, common to both rings, lying 0.6397 (19) and 0.6328 (18) Å out of the approximate plane defined by the remaining five C atoms (r.m.s. deviations = 0.0791 and 0.0901 Å for rings B and C, respectively). Helical supramolecular chains along the a axis mediated by hydroxy– carbonyl O—H…O hydrogen bonds feature in the crystal packing. (4R,4aS,4bS,5R,10aR)-4-Hydroxy-4a,5-dimethyl-2-(propan-2-yl)- 1,4,4a,4b,5,6,7,8,10,10a-decahydrophenanthren-1-one (Compound 3) In this compound, C19H28O2, the A ring adopts a chair conformation. Both the B and C rings adopt envelope conformations with the C atoms common to both rings and adjacent to the carbonyl and hydroxyl groups, respectively, lying 0.604 (3) and 0.634 (3) Å out of the mean planes defined by the remaining five C atoms of rings B and C, respectively (r.m.s. deviations = 0.0100 and 0.0157 Å, respectively). The formation of linear supramolecular chains along the a axis mediated by hydroxy-O—H…O(carbonyl) hydrogen bonds is the most prominent feature of the crystal packing. The calculated and crystallographic structures are shown to be similar so that, in this case, the intermolecular interactions and consequently the crystal packing has almost no influence on the molecular conformation. / Este trabalho é uma contribuição ao estudo de estruturas cristalinas, moleculares e supramoleculares como também a conformação no vácuo de derivados de decahidrofenantrenos. (4aS,4bR,7R,10aS)-3,7-Dimetil-10a- (propan-2-il)-1,4,4a,4b,5,6,7,8,10,10adecahidrofenantren- 1,4-diona (Composto 1) Neste composto, C19H26O2, o anel A está em conformação de cadeira, enquanto ambos os anéis B e C estão em conformação de meia-cadeira distorcida com o átomo de carbono quaternário comum à ambos os anéis estando 0.577 (3) e 0.648 (3) Å fora do plano calculado definido pelos outros cinco átomos de carbono (desvios r.m.s. = 0.1386 e 0.1156 Å para os anéis B e C, respectivamente). O arranjo das moléculas no cristal é governado por interações C—H…O envolvendo ambos os átomos de oxigênio carbonílicos, formando cadeias supramoleculares alinhadas ao longo do eixo b. (4R,4aS,4bS,7R,10aR )-4-Hidroxi-4a,7-dimetil-2-(propan-2- il)-1,4,4a,4b,5,6,7,8,10,10a-decahidrofenantren-1-ona (Composto 2) Neste composto, C19H28O2, o anel A está em conformação de cadeira e cada um dos anéis B e C estão em conformação de meia-cadeira distorcida com o átomo de carbono metilênico do resíduo CH2C(H)C(O), comum à ambos os anéis, estando 0.6397 (19) and 0.6328 (18) Å fora do plano calculado definido pelos cinco átomos de carbono remanescentes (desvios r.m.s. = 0.0791 e 0.0901 Å para os anéis B e C, respectivamente). No empacotamento cristalino encontram-se cadeias supramoleculares helicoidais paralelas ao eixo a, mediadas por ligações de hidrogênio hidróxi-carbonil O—H…O. (4R,4aS,4bS,5R,10aR)-4-Hidroxi-4a,5-dimetil-2-(propan-2-il)- 1,4,4a,4b,5,6,7,8,10,10a-decahidrofenantren-1-ona (Composto 3) Neste composto, C19H28O2, o anel A está em conformação de cadeira. Ambos os anéis B e C estão em conformação de envelope com os átomos de carbonos adjacentes aos grupos carboxila e hidroxila e comuns à ambos os anéis estando 0.604 (3) e 0.634 (3) Å fora do plano médio definido pelos cinco átomos de carbono restantes dos anéis B e C, respectivamente (desvios r.m.s. = 0.0100 para o anel B e 0.0157 Å para o anel C). A característica mais marcante do empacotamento cristalino é a formação de cadeias supramoleculares lineares ao longo do eixo a mediadas por ligações de hidrogênio hidróxi O—H…O (carbonil). As estruturas cristalográficas e as calculadas são similares, portanto neste caso as interações intermoleculares e consequentemente o empacotamento cristalino influem muito pouco na conformação molecular.

Made available in DSpace on 2014-10-09T12:50:53Z (GMT). No. of bitstreams: 0 / Made available in DSpace on 2014-10-09T13:59:02Z (GMT). No. of bitstreams: 1 11109.pdf: 12432310 bytes, checksum: c0a31703a7116daea7b5d40b3ca371f2 (MD5) / Tese (Doutoramento) / IPEN/T / Instituto de Pesquisas Energeticas e Nucleares - IPEN/CNEN-SP